Download or read book Plate and Panel Structures of Isotropic Composite and Piezoelectric Materials Including Sandwich Construction written by Jack R. Vinson and published by Springer Science & Business Media. This book was released on 2005-02-08 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plates and panels are primary components in many structures including space vehicles, aircraft, automobiles, buildings, bridge decks, ships and submarines. The ability to design, analyse, optimise and select the proper materials for these structures is a necessity for structural designers, analysts and researchers. This text consists of four parts. The first deals with plates of isotropic (metallic and polymeric) materials. The second involves composite material plates, including anisotropy and laminate considerations. The third section treats sandwich constructions of various types, and the final section gives an introduction to plates involving piezoelectric materials, in which the "smart" or "intelligent" materials are used as actuators or sensors. In each section, the formulations encompass plate structures subjected to static loads, dynamic loads, buckling, thermal/moisture environments, and minimum weight structural optimisation. This is a textbook for a graduate course, an undergraduate senior course and a reference. Many homework problems are given in various chapters.

Download or read book Mechanics of Classical Sandwich Structures written by Andreas Öchsner and published by Springer Nature. This book was released on 2023-03-29 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book treats the mechanical behavior of one-dimensional sandwich structures, a typicaloncept in the context of lightweight design. Such structures are composed of different constituent (e.g., layers) in order to achieve overall properties, which are better than for a single component alone. This book covers the basic mechanical load cases, i.e., tension/compression, bending, and shear. Based on this knowledge, different failure modes, i.e., plastic yielding, and global and local instabilities are investigated. In addition, an introduction to classic optimization problems, i.e., the formulation of an objective function (e.g., the weight of a structure) and corresponding restrictions, is included. The consideration here is limited to one- or two-dimensional design spaces, i.e., with a maximum of two design variables. For such simple cases, the minimum of the objective function can often be determined using analytical or graphical methods.

Download or read book Stability and Vibrations of Thin Walled Composite Structures written by Haim Abramovich and published by Woodhead Publishing. This book was released on 2017-05-29 with total page 772 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stability and Vibrations of Thin-Walled Composite Structures presents engineering and academic knowledge on the stability (buckling and post buckling) and vibrations of thin walled composite structures like columns, plates, and stringer stiffened plates and shells, which form the basic structures of the aeronautical and space sectors. Currently, this knowledge is dispersed in several books and manuscripts, covering all aspects of composite materials. The book enables both engineers and academics to locate valuable, up-to-date knowledge on buckling and vibrations, be it analytical or experimental, and use it for calculations or comparisons. The book is also useful as a textbook for advanced-level graduate courses. - Presents a unified, systematic, detailed and comprehensive overview of the topic - Contains contributions from leading experts in the field - Includes a dedicated section on testing and experimental results

Download or read book The Mechanics of Smart Nanocomposite Sandwich Structures written by M.S.H. Al-Furjan and published by Cambridge Scholars Publishing. This book was released on 2023-01-24 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the mechanics of smart nanocomposite sandwich plates, discussing various relevant theories of mechanical analysis such as buckling, vibration and dynamic instability. It presents different models for obtaining the effective material properties of nanocomposite structures such as Mori-Tanaka, mixture, micro-electro-mechanical and Halpin-Tsai. In addition, the basic equations for smart materials are introduced, while the governing equations for various examples are derived on the basis of the energy method and Hamilton’s principle.

Download or read book Lectures Notes on Advanced Structured Materials 2 written by Holm Altenbach and published by Springer Nature. This book was released on with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Perovskite and Piezoelectric Materials written by Someshwar Pola and published by BoD – Books on Demand. This book was released on 2021-01-27 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: Investigating in the area of perovskite materials and the fabrication of devices for properties in optoelectronics, we have presented a brief outline of perovskite materials. The authors present a fairly comprehensive arrangement of this very active area of research, with its past changes and present position and outlooks. Discussions are presented regarding photocatalysis, fabrication of solar cell devices and their stability, lead-free materials, as well as thermoelectric and piezoelectric applications. In view of the present status of perovskite materials, I am assured that each chapter of the book will be of boundless encouragement for researchers, scientists, and academicians working in this field.

Download or read book Advances in the Analysis and Design of Marine Structures written by J. W. Ringsberg and published by CRC Press. This book was released on 2023-04-14 with total page 921 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in the Analysis and Design of Marine Structures is a collection of papers presented at MARSTRUCT 2023, the 9th International Conference on Marine Structures, held in Gothenburg, Sweden, 3-5 April 2023. The conference was organised by the Division of Marine Technology, Department of Mechanics and Maritime Sciences at Chalmers University of Technology, in Gothenburg, Sweden. The MARSTRUCT Conference series deals with Ship and Offshore Structures, addressing topics in the fields of: Methods and tools for loads and load effects Methods and tools for strength assessment Experimental analysis of structures Materials and fabrication of structures Methods and tools for structural design and optimization Structural reliability, safety, and environmental protection The MARSTRUCT conferences series of started in Glasgow, UK in 2007, the second event of the series took place in Lisbon, Portugal in March 2009, the third in Hamburg, Germany in March 2011, the fourth in Espoo, Finland in March 2013, the fifth in Southampton, UK in March 2015, the sixth in Lisbon, Portugal in May 2017, the seventh in Dubrovnik, Croatia in May 2019, and the eighth event in Trondheim, Norway in June 2021. Advances in the Analysis and Design of Marine Structures is essential reading for academics, engineers and all professionals involved in the design of marine and offshore structures. The Proceedings in Marine Technology and Ocean Engineering series is devoted to the publication of proceedings of peer-reviewed international conferences dealing with various aspects of ‘Marine Technology and Ocean Engineering’. The Series includes the proceedings of the following conferences: the International Maritime Association of the Mediterranean (IMAM) Conferences, the Marine Structures (MARSTRUCT) Conferences, the Renewable Energies Offshore (RENEW) Conferences and the Maritime Technology (MARTECH) Conferences. The ‘Marine Technology and Ocean Engineering’ series is also open to new conferences that cover topics on the sustainable exploration and exploitation of marine resources in various fields, such as maritime transport and ports, usage of the ocean including coastal areas, nautical activities, the exploration and exploitation of mineral resources, the protection of the marine environment and its resources, and risk analysis, safety and reliability. The aim of the series is to stimulate advanced education and training through the wide dissemination of the results of scientific research.

Download or read book FRP Composite Structures written by Hota V.S. GangaRao and published by CRC Press. This book was released on 2021-10-27 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of fiber-reinforced polymer (FRP) composites in infrastructure systems has grown considerably in recent years because of the durability of composite materials. New constituent materials, manufacturing techniques, design approaches, and construction methods are being developed and introduced in practice by the FRP composites community to cost-effectively build FRP structural systems. FRP Composite Structures: Theory, Fundamentals, and Design brings clarity to the analysis and design of these FRP composite structural systems to advance the field implementation of structural systems with enhanced durability and reduced maintenance costs. It develops simplified mathematical models representing the behavior of beams and plates under static loads, after introducing generalized Hooke’s Law for materials with anisotropic, orthotropic, transversely isotropic, and isotropic properties. Subsequently, the simplified models coupled with design methods including FRP composite material degradation factors are introduced by solving a wide range of practical design problems. This book: Explores practical and novel infrastructure designs and implementations Uses contemporary codes recently approved Includes FRP case studies from around the world Ensures readers fully understand the basic mechanics of composite materials before involving large-scale number crunching Details several advanced topics including aging of FRPs, typical failures of structures including joints, and design simplifications without loss of accuracy and emphasis on failure modes Features end of chapter problems and solved examples throughout. This textbook is aimed at advanced undergraduate and graduate students and industry professionals focused on the analysis and design of FRP composite structural members. It features PowerPoint lecture slides and a solutions manual for adopting professors.

Download or read book Optimization Methods in Structural Design written by Alan Rothwell and published by Springer. This book was released on 2017-03-27 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers an introduction to numerical optimization methods in structural design. Employing a readily accessible and compact format, the book presents an overview of optimization methods, and equips readers to properly set up optimization problems and interpret the results. A ‘how-to-do-it’ approach is followed throughout, with less emphasis at this stage on mathematical derivations. The book features spreadsheet programs provided in Microsoft Excel, which allow readers to experience optimization ‘hands-on.’ Examples covered include truss structures, columns, beams, reinforced shell structures, stiffened panels and composite laminates. For the last three, a review of relevant analysis methods is included. Exercises, with solutions where appropriate, are also included with each chapter. The book offers a valuable resource for engineering students at the upper undergraduate and postgraduate level, as well as others in the industry and elsewhere who are new to these highly practical techniques.While the specific application is to structural design, the principles involved can be applied far more widely.

Download or read book Advanced Topics Of Thin walled Structures written by Haim Abramovich and published by World Scientific. This book was released on 2021-06-10 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique compendium presents some new topics related to thin-walled structures, like beams, plates and shells used in aerospace structures. It highlights their dynamic behaviors and also the correlation between compressive loading and natural frequency to enable a correlation between the two, yielding a valuable non-destructive tool, to predict buckling for thin-walled structures.This useful reference text combines valuable data on metal materials and composite materials together with new adaptive and smart materials like piezoelectricity, shape memory alloys and optic fibers, which form the present state of the art in thin-walled structure domain.

Download or read book Elasticity of Transversely Isotropic Materials written by Haojiang Ding and published by Springer Science & Business Media. This book was released on 2006-07-09 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to provide a comprehensive introduction to the theory and applications of the mechanics of transversely isotropic elastic materials. There are many reasons why it should be written. First, the theory of transversely isotropic elastic materials is an important branch of applied mathematics and engineering science; but because of the difficulties caused by anisotropy, the mathematical treatments and descriptions of individual problems have been scattered throughout the technical literature. This often hinders further development and applications. Hence, a text that can present the theory and solution methodology uniformly is necessary. Secondly, with the rapid development of modern technologies, the theory of transversely isotropic elasticity has become increasingly important. In addition to the fields with which the theory has traditionally been associated, such as civil engineering and materials engineering, many emerging technologies have demanded the development of transversely isotropic elasticity. Some immediate examples are thin film technology, piezoelectric technology, functionally gradient materials technology and those involving transversely isotropic and layered microstructures, such as multi-layer systems and tribology mechanics of magnetic recording devices. Thus a unified mathematical treatment and presentation of solution methods for a wide range of mechanics models are of primary importance to both technological and economic progress.

Download or read book IUTAM Symposium on Topological Design Optimization of Structures Machines and Materials written by Martin Philip Bendsoe and published by Springer Science & Business Media. This book was released on 2006-10-03 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume offers edited papers presented at the IUTAM-Symposium Topological design optimization of structures, machines and materials - status and perspectives, October 2005. The papers cover the application of topological design optimization to fluid-solid interaction problems, acoustics problems, and to problems in biomechanics, as well as to other multiphysics problems. Also in focus are new basic modelling paradigms, covering new geometry modelling such as level-set methods and topological derivatives.

Download or read book Fire Properties of Polymer Composite Materials written by A. P. Mouritz and published by Springer Science & Business Media. This book was released on 2007-01-30 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the first to deal with the important topic of the fire behaviour of fibre reinforced polymer composite materials. The book covers all of the key issues on the behaviour of composites in a fire. Also covered are fire protection materials for composites, fire properties of nanocomposites, fire safety regulations and standards, fire test methods, and health hazards from burning composites.

Download or read book Reanalysis of Structures written by Uri Kirsch and published by Springer Science & Business Media. This book was released on 2008-02-24 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with various computational procedures for multiple repeated analyses (reanalysis) of structures, and presents them in a unified approach. It meets the need for a general text covering the basic concepts and methods as well as recent developments in this area. To clarify the presentation, many illustrative examples and numerical results are demonstrated. Previous books on structural analysis do not cover most of the material presented here.

Download or read book Multiscale Fatigue Crack Initiation and Propagation of Engineering Materials Structural Integrity and Microstructural Worthiness written by George C. Sih and published by Springer Science & Business Media. This book was released on 2008-06-01 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: What can be added to the fracture mechanics of metal fatigue that has not already been said since the 1900s? From the view point of the material and structure engineer, there are many aspects of failure by fatigue that are in need of attention, particularly when the size and time of the working components are changed by orders of magnitude from those considered by st traditional means. The 21 century marks an era of technology transition where structures are made larger and devices are made smaller, rendering the method of destructive testing unpractical. While health monitoring entered the field of science and engineering, the practitioners are discovering that the correlation between the signal and the location of interest depends on a priori knowledge of where failure may initiate. This information is not easy to find because the integrity of the physical system will change with time. Required is software that can self-adjust in time according to the monitored data. In this connection, effective application of health monitoring can use a predictive model of fatigue crack growth. Earlier fatigue crack growth models assumed functional dependence on the maximum stress and the size of the pre-existing crack or defect. Various possibilities were examined in the hope that the data could be grouped such that linear interpolation would apply.

Download or read book IUTAM Symposium on Multiscale Modelling of Damage and Fracture Processes in Composite Materials written by Tomasz Sadowski and published by Springer Science & Business Media. This book was released on 2006-07-06 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrating macroscopic properties with observations at lower levels, this book details advances in multiscale modelling and analysis pertaining to classes of composites which either have a wider range of relevant microstructural scales, such as metals, or do not have a very well-defined microstructure, e.g. cementitious or ceramic composites. The IUTAM symposia proceedings provide a platform for extensive further discussion and research.

Download or read book Thin Walled Composite Beams written by Liviu Librescu and published by Springer Science & Business Media. This book was released on 2006-01-15 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation This is the first monograph devoted to the foundation of the theory of composite anisotropic thin-walled beams and to its applications in various problems involving the aeronautical/aerospace, helicopter, naval and mechanical structures. Throughout the theoretical part, an effort was made to provide the treatment of the subject by using the equations of the 3-D elasticity theory. Non-classical effects such as transverse shear, warping constraint, anisotropy of constituent materials yielding the coupling of twist-bending (lateral), bending (transversal)-extension have been included and their implications have been thoroughly analyzed. Thermal effects have been included and in order to be able to circumvent their deleterious effects, functionally graded materials have been considered in their construction. Implications of the application of the tailoring technique and of the active feedback control on free vibration, dynamic response, instability and aeroelasticity of such structures have been amply investigated. Special care was exercised throughout this work to address and validate the adopted solution methodologies and the obtained results against those available in the literature and obtained via numerical or experimental means.