Download or read book Understanding Plastics Recycling written by Natalie Rudolph and published by Carl Hanser Verlag GmbH Co KG. This book was released on 2020-10-12 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book shows the true and often-underestimated market potential of plastics recycling, with analysis from economic, ecological, and technical perspectives. It is aimed at both technical and non-technical readers, including decision makers in material suppliers, plastic product manufacturers, governmental agencies, educators, and anyone with a general interest in plastics recycling. An overview of waste handling systems with a focus on the U.S. market is provided. Different methods of waste handling are compared from both economic and ecological perspectives. Since plastic waste recycling is essential from an ecological point of view, common strategies and new approaches to both increase the recycling rate and improve recycling economically and technically are presented. This includes processing and material properties of recycled plastics. Finally, a worldwide outlook of plastic recycling is provided with analysis of additional worldwide markets, encompassing highly developed, fast-developing, and less developed countries. This revised and expanded second edition also contains a new section on fiber-reinforced plastics and considerations for recycling them as well as numerous updates on the data and the context analyzed throughout the book. The spreadsheets used in the economic analyses are also offered as a bonus for the reader to download from plus.hanser-fachbuch.de/en. True to the authors’ mission, this book is printed on recycled paper.
Download or read book Plastic Waste and Recycling written by Trevor M. Letcher and published by Academic Press. This book was released on 2020-03-10 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastic Waste and Recycling: Environmental Impact, Societal Issues, Prevention, and Solutions begins with an introduction to the different types of plastic materials, their uses, and the concepts of reduce, reuse and recycle before examining plastic types, chemistry and degradation patterns that are organized by non-degradable plastic, degradable and biodegradable plastics, biopolymers and bioplastics. Other sections cover current challenges relating to plastic waste, explain the sources of waste and their routes into the environment, and provide systematic coverage of plastic waste treatment methods, including mechanical processing, monomerization, blast furnace feedstocks, gasification, thermal recycling, and conversion to fuel. This is an essential guide for anyone involved in plastic waste or recycling, including researchers and advanced students across plastics engineering, polymer science, polymer chemistry, environmental science, and sustainable materials. Presents actionable solutions for reducing plastic waste, with a focus on the concepts of collection, re-use, recycling and replacement Considers major societal and environmental issues, providing the reader with a broader understanding and supporting effective implementation Includes detailed case studies from across the globe, offering unique insights into different solutions and approaches
Download or read book Recycling of Plastics Metals and Their Composites written by R.A. Ilyas and published by CRC Press. This book was released on 2021-12-27 with total page 541 pages. Available in PDF, EPUB and Kindle. Book excerpt: Having a solid understanding of materials recycling is of high importance, especially due to the growing use of composites in many industries and increasingly strict legislation and concerns about the disposal of composites in landfills or by incineration. Recycling of Plastics, Metals, and Their Composites provides a comprehensive review of the recycling of waste polymers and metal composites. It provides the latest advances and covers the fundamentals of recycled polymers and metal composites, such as preparation, morphology, and physical, mechanical, thermal, and flame-retardancy properties. FEATURES Offers a state-of-the-art review of the recycling of polymer composites and metal composites for sustainability Describes a life-cycle analysis to help readers understand the true potential value and market for these recycled materials Details potential applications of recycled polymer and metal composites Includes the performance of natural fiber–reinforced recycled thermoplastic polymer composites under aging conditions and the recycling of multi-material plastics Covers recycling technologies, opportunities, and challenges for polymer-matrix composites This book targets technical professionals in the metal and polymer industries as well as researchers, scientists, and advanced students. It is also of interest to decision makers at material suppliers, recycled metal and polymer product manufacturers, and governmental agencies working with recycled metal and polymer composites.
Download or read book Recent Developments in Plastic Recycling written by Jyotishkumar Parameswaranpillai and published by Springer Nature. This book was released on 2021-10-01 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a systematic and comprehensive account of the recent developments in the recycling of plastic waste material. It presents state-of-the-art procedures for recycling of plastics from different sources and various characterization methods adopted in analyzing their properties. In addition, it looks into properties, processing, and applications of recycled plastic products as one of the drivers for sustainable recycling plastics especially in developing countries. This book proves a useful reference source for both engineers and researchers working in composite materials science as well as the students attending materials science, physics, chemistry, and engineering courses.
Download or read book Can I Recycle This written by Jennie Romer and published by Penguin. This book was released on 2021-04-13 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: “If you’ve ever been perplexed by the byzantine rules of recycling, you’re not alone…you’ll want to read Can I Recycle This?... An extensive look at what you can and cannot chuck into your blue bin.” —The Washington Post The first illustrated guidebook that answers the age-old question: Can I Recycle This? Since the dawn of the recycling system, men and women the world over have stood by their bins, holding an everyday object, wondering, "can I recycle this?" This simple question reaches into our concern for the environment, the care we take to keep our homes and our communities clean, and how we interact with our local government. Recycling rules seem to differ in every municipality, with exceptions and caveats at every turn, leaving the average American scratching her head at the simple act of throwing something away. Taking readers on a quick but informative tour of how recycling actually works (setting aside the propaganda we were all taught as kids), Can I Recycle This gives straightforward answers to whether dozens of common household objects can or cannot be recycled, as well as the information you need to make that decision for anything else you encounter. Jennie Romer has been working for years to help cities and states across America better deal with the waste we produce, helping draft meaningful legislation to help communities better process their waste and produce less of it in the first place. She has distilled her years of experience into this non-judgmental, easy-to-use guide that will change the way you think about what you throw away and how you do it.
Download or read book Plastics Fabrication and Recycling written by Manas Chanda and published by CRC Press. This book was released on 2016-04-19 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: Derived from the fourth edition of the well-known Plastics Technology Handbook, Plastics Fabrication and Recycling presents the molding and fabrication processes of plastics as well as several important fe
Download or read book Handbook of Plastics Recycling written by Francesco Paolo La Mantia and published by iSmithers Rapra Publishing. This book was released on 2002 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses some of the state-of-the-art techniques of recycling post-consumer plastic materials and focuses on mechanical recycling, chemical recycling and energy recovery. The book is intended for all those who are interested in recycling of post consumer plastic waste. Although, this book discusses technical aspects of recycling, the authors have endeavoured to make this book easily understandable to anyone interested in the subject enabling the reader to gain a thorough grounding in all the subjects discussed.
Download or read book Recycling of Polyethylene Terephthalate written by Martin J. Forrest and published by Walter de Gruyter GmbH & Co KG. This book was released on 2019-04-01 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polyethylene terephthalate (PET) is the most recycled plastic in the world. This book covers all from the world market of PET to the many technologies and processes developed for separation, decontamination, recycling and manufacturing into food-grade and non-food-grade products of PET. Also, regulations, testing methods and analytical procedures according to the current regulatory framework are presented.
Download or read book Handbook of Recycling written by Ernst Worrell and published by Newnes. This book was released on 2014-04-28 with total page 595 pages. Available in PDF, EPUB and Kindle. Book excerpt: Winner of the International Solid Waste Association's 2014 Publication Award, Handbook of Recycling is an authoritative review of the current state-of-the-art of recycling, reuse and reclamation processes commonly implemented today and how they interact with one another. The book addresses several material flows, including iron, steel, aluminum and other metals, pulp and paper, plastics, glass, construction materials, industrial by-products, and more. It also details various recycling technologies as well as recovery and collection techniques. To completely round out the picture of recycling, the book considers policy and economic implications, including the impact of recycling on energy use, sustainable development, and the environment. With contemporary recycling literature scattered across disparate, unconnected articles, this book is a crucial aid to students and researchers in a range of disciplines, from materials and environmental science to public policy studies. Portrays recent and emerging technologies in metal recycling, by-product utilization and management of post-consumer waste Uses life cycle analysis to show how to reclaim valuable resources from mineral and metallurgical wastes Uses examples from current professional and industrial practice, with policy and economic implications
Download or read book Recycling and Recovery of Plastics written by J. Brandrup and published by Hanser Verlag. This book was released on 1996 with total page 893 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sponsored by the European Commission-Institute of Prospective Technology Studies, the Association of Plastics Manufacturers in Europe, and the American Plastics Council, this handbook covers issues such as recycling-oriented design, ecobalances, collection and sorting of waste, various pre-treatment processes, and the logistics adapted to geographical circumstances.
Download or read book Additive Manufacturing for Plastic Recycling written by Rupinder Singh and published by CRC Press. This book was released on 2022-04-26 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive and up-to-date discussion of breakthroughs on additive manufacturing for plastic material recycling to boost a circular economy. It offers new ideas of combining/hybridizing processing methods that work as a source of information for manufacturers in making new and strategic product development plans. Additive Manufacturing for Plastic Recycling: Efforts in Boosting a Circular Economy provides a critical, comprehensive, methodological, and strong state-of-the-art work on the processing of thermoplastic and thermosetting along with new directions and applications. It describes the common and hybrid approaches of recycling processes and includes theoretical and practical ideas of combining/hybridizing processing methods with the use of fused deposition modelling, which is one of the low-cost additive manufacturing techniques. The book also discusses mechanical twin-screw extrusion followed by case studies for developing hybrid composite structures for biomedical and structural applications. Recent innovations in melt processing for recycling and the fundaments, process parameters investigations, and applications for new product development are also presented. This book is a first-hand reference source of information for academic scholars and commercial manufacturers for making strategic development plans for new product development.
Download or read book Understanding Plastics Recycling written by Natalie Rudolph and published by Hanser Publications. This book was released on 2017 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book shows the true and often-underestimated market potential of plastics recycling, with analysis from economic, ecological, and technical perspectives. It is aimed at both technical and non-technical readers, including decision makers in material suppliers, plastic product manufacturers, governmental agencies, educators, and anyone with a general interest in plastics recycling. An overview of waste handling systems with a focus on the U.S. market is provided. Different methods of waste handling are compared from both economic and ecological perspectives. Because plastic waste recycling is essential from an ecological point of view, common strategies and new approaches to both increase the recycling rate and improve recycling economically and technically are presented. This includes processing and material properties of recycled plastics. Finally, a worldwide outlook of plastic recycling is provided with analysis of additional worldwide markets, encompassing highly developed, fast-developing, and less developed countries. Bonus: All the data and calculations presented in the book are provided as downloadable spreadsheets for the reader's own analysis and updates.
Download or read book Use of Recycled Plastics in Eco efficient Concrete written by F. Pacheco-Torgal and published by Woodhead Publishing. This book was released on 2018-11-21 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: Use of Recycled Plastics in Eco-efficient Concrete looks at the processing of plastic waste, including techniques for separation, the production of plastic aggregates, the production of concrete with recycled plastic as an aggregate or binder, the fresh properties of concrete with plastic aggregates, the shrinkage of concrete with plastic aggregates, the mechanical properties of concrete with plastic aggregates, toughness of concrete with plastic aggregates, modulus of elasticity of concrete with plastic aggregates, durability of concrete with plastic aggregates, concrete plastic waste powder with enhanced neutron radiation shielding, and more, thus making it a valuable reference for academics and industrial researchers. Describes the main types of recycled plastics that can be applied in concrete manufacturing Presents, for the first time, state-of-the art knowledge on the properties of conventional concrete with recycled plastics Discusses the technological challenges for concrete manufactures for mass production of recycled concrete from plastic waste
Download or read book Recycling of Flexible Plastic Packaging written by Michael Niaounakis and published by William Andrew. This book was released on 2019-12-04 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recycling of Flexible Plastic Packaging presents thorough and detailed information on the management and recycling of flexible plastic packaging, focusing on the latest actual/potential methods and techniques and offering actionable solutions that minimize waste and increase product efficiency and sustainability. Sections cover flexible plastic packaging and its benefits, applications and challenges. This is followed by in-depth coverage of the materials, types and forms of flexible packaging. Other key discussions cover collection and pre-treatment, volume reduction, separation from other materials, chemical recycling, post-processing and reuse, current regulations and policies, economic aspects and immediate trends. This information will be highly valuable to engineers, scientists and R&D professionals across industry. In addition, it will also be of great interest to researchers in academia, those in government, or anyone with an interest in recycling who is looking to further advance and implement recycling methods for flexible plastic packaging. Presents state-of-the-art methods and technologies regarding the processing of flexible plastic packaging waste Addresses the challenges currently associated with both waste management and available recycling methods Opens the door to innovation, supporting improved recycling methods, manufacturing efficiency and industrial sustainability
Download or read book Plastic Free written by Beth Terry and published by Simon and Schuster. This book was released on 2015-04-21 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt: “Guides readers toward the road less consumptive, offering practical advice and moral support while making a convincing case that individual actions . . . do matter.” —Elizabeth Royte, author, Garbage Land and Bottlemania Like many people, Beth Terry didn’t think an individual could have much impact on the environment. But while laid up after surgery, she read an article about the staggering amount of plastic polluting the oceans, and decided then and there to kick her plastic habit. In Plastic-Free, she shows you how you can too, providing personal anecdotes, stats about the environmental and health problems related to plastic, and individual solutions and tips on how to limit your plastic footprint. Presenting both beginner and advanced steps, Terry includes handy checklists and tables for easy reference, ways to get involved in larger community actions, and profiles of individuals—Plastic-Free Heroes—who have gone beyond personal solutions to create change on a larger scale. Fully updated for the paperback edition, Plastic-Free also includes sections on letting go of eco-guilt, strategies for coping with overwhelming problems, and ways to relate to other people who aren’t as far along on the plastic-free path. Both a practical guide and the story of a personal journey from helplessness to empowerment, Plastic-Free is a must-read for those concerned about the ongoing health and happiness of themselves, their children, and the planet.
Download or read book Plastics Product Recycling written by Sara Hulse and published by iSmithers Rapra Publishing. This book was released on 2000 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report covers the consumption of plastics in Europe, how much waste plastic is produced, a summary of recent legislation and the various methods of dealing with plastic wastes. The plastics recycling industry in Europe is then reviewed, with an in-depth look at the relevant legislation followed by a summary of the situation in most of the major European countries. The major end-use sectors for plastics and the problem of waste plastics in each are examined in the final section.
Download or read book Feedstock Recycling and Pyrolysis of Waste Plastics written by John Scheirs and published by John Wiley & Sons. This book was released on 2006-05-12 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pyrolysis is a recycling technique converting plastic waste into fuels, monomers, or other valuable materials by thermal and catalytic cracking processes. It allows the treatment of mixed, unwashed plastic wastes. For many years research has been carried out on thermally converting waste plastics into useful hydrocarbons liquids such as crude oil and diesel fuel. Recently the technology has matured to the point where commercial plants are now available. Pyrolysis recycling of mixed waste plastics into generator and transportation fuels is seen as the answer for recovering value from unwashed, mixed plastics and achieving their desired diversion from landfill. This book provides an overview of the science and technology of pyrolysis of waste plastics. It describes the types of plastics that are suitable for pyrolysis recycling, the mechanism of pyrolytic degradation of various plastics, characterization of the pyrolysis products and details of commercially mature pyrolysis technologies. This book also covers co-pyrolysis technology, including: waste plastic/waste oil, waste plastics/coal, and waste plastics/rubber.
