Download or read book Plastics Processing Monitoring and Control written by David O. Kazmer and published by . This book was released on 2024 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Injection Molding Process Control Monitoring and Optimization written by Yi Yang (Chemical engineer) and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Management in Plastics Processing written by Robin Kent and published by Elsevier. This book was released on 2018-07-06 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy Management in Plastics Processing: Strategies, Targets, Techniques, and Tools, Third Edition, addresses energy benchmarking and site surveys, how to understand energy supplies and bills, and how to measure and manage energy usage and carbon footprinting. The book's approach highlights the need to reduce the kWh/kg of materials processed and the resulting permanent reductions in consumption and costs. Every topic is covered in a 2-page spread, providing the reader with clear actions and key tips for success. This revised third edition covers new developments in energy management, power supply considerations, automation, assembly operations, water footprinting, and transport considerations, and more. Users will find a practical workbook that not only shows how to reduce energy consumption in all the major plastics shaping processes (moulding, extrusion, forming), but also provides tactics that will benefit other locations in plants (e.g. in factory services and nonmanufacturing areas). Enables plastics processors in their desire to institute an effective energy management system, both in processing and elsewhere in the plant Provides a holistic perspective, shining a light on areas where energy management methods may have not been previously considered Acts as a roadmap to help companies move towards improved sustainability and cost savings
Download or read book Plastics Processing Data Handbook written by D.V. Rosato and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive book provides guidelines for maximizing plastics proc essing efficiency in the manufacture of all types of products, using all types of plastics. A practical approach is employed to present fundamental, yet comprehensive, coverage of processing concepts. The information and data presented by the many tables and figures interrelate the different variables that affect injection molding, extrusion, blow molding, thermoforming, compression molding, reinforced plastics molding, rotational molding, re action injection molding, coining, casting, and other processes. The text presents a great number of problems pertaining to different phases of processing. Solutions are provided that will meet product per formance requirements at the lowest cost. Many of the processing variables and their behaviors in the different processes are the same, as they all in volve basic conditions of temperature, time, and pressure. The book begins with information applicable to all processes, on topics such as melt soft ening flow and controls; all processes fit into an overall scheme that re quires the interaction and proper control of systems. Individual processes are reviewed to show the effects of changing different variables to meet the goal of zero defects. The content is arranged to provide a natural progres sion from simple to complex situations, which range from control of a sin gle manual machine to simulation of sophisticated computerized processes that interface with many different processing functions.
Download or read book Plastics Process Analysis Instrumentation and Control written by Johannes Karl Fink and published by John Wiley & Sons. This book was released on 2021-03-02 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on plastics process analysis, instrumentation for modern manufacturing in the plastics industry. Process analysis is the starting point since plastics processing is different from processing of metals, ceramics, and other materials. Plastics materials show unique behavior in terms of heat transfer, fluid flow, viscoelastic behavior, and a dependence of the previous time, temperature and shear history which determines how the material responds during processing and its end use. Many of the manufacturing processes are continuous or cyclical in nature. The systems are flow systems in which the process variables, such as time, temperature, position, melt and hydraulic pressure, must be controlled to achieve a satisfactory product which is typically specified by critical dimensions and physical properties which vary with the processing conditions. Instrumentation has to be selected so that it survives the harsh manufacturing environment of high pressures, temperatures and shear rates, and yet it has to have a fast response to measure the process dynamics. At many times the measurements have to be in a non-contact mode so as not to disturb the melt or the finished product. Plastics resins are reactive systems. The resins will degrade if the process conditions are not controlled. Analysis of the process allows one to strategize how to minimize degradation and optimize end-use properties.
Download or read book Plastics Process Analysis Instrumentation and Control written by Nick Schott and published by Wiley-Scrivener. This book was released on 2013-05-21 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the subject of process analysis, instrumentation and control for modern manufacturing in the plastics industry. It addresses process analysis (i.e. why plastics manufacturing is unique), the required instrumentation, hardware, data acquisition, and control loop strategy, and the tools of process monitoring, diagnostics, and control.
Download or read book Plastics Processing Technology written by Edward A. Muccio and published by ASM International(OH). This book was released on 1994 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a basic understanding of plastics processing technology at a level suitable for technicians, managers, buyers, quality assurance personnel, and engineers who have minimal experience with plastics. Highlights the key aspects of materials, thermodynamics, fluid technology, control, and tool/p
Download or read book Applied Plastics Engineering Handbook written by Myer Kutz and published by William Andrew. This book was released on 2011-07-20 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical reference for all plastics engineers who are seeking to answer a question, solve a problem, reduce a cost, improve a design or fabrication process, or even venture into a new market. Applied Plastics Engineering Handbook covers both polymer basics – helpful to bring readers quickly up to speed if they are not familiar with a particular area of plastics processing – and recent developments – enabling practitioners to discover which options best fit their requirements. Each chapter is an authoritative source of practical advice for engineers, providing authoritative guidance from experts that will lead to cost savings and process improvements. Throughout the book, the focus is on the engineering aspects of producing and using plastics. The properties of plastics are explained along with techniques for testing, measuring, enhancing and analyzing them. Practical introductions to both core topics and new developments make this work equally valuable for newly qualified plastics engineers seeking the practical rules-of-thumb they don’t teach you in school, and experienced practitioners evaluating new technologies or getting up to speed on a new field The depth and detail of the coverage of new developments enables engineers and managers to gain knowledge of, and evaluate, new technologies and materials in key growth areas such as biomaterials and nanotechnology This highly practical handbook is set apart from other references in the field, being written by engineers for an audience of engineers and providing a wealth of real-world examples, best practice guidance and rules-of-thumb
Download or read book Cost Management in Plastics Processing written by Robin John Kent and published by . This book was released on 2012-11 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cost Management in Plastics Processing written by Robin Kent and published by Elsevier. This book was released on 2017-09-29 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cost Management in Plastics Processing: Strategies, Targets, Techniques, and Tools, Fourth Edition, makes readers think about current practices and how to go forward with effective cost management. This is a practical workbook that provides a structured approach to reducing costs in plastics processing for all the major plastics shaping processes (moulding, extrusion, forming) as well as elsewhere in the company (e.g., in factory services and non-manufacturing areas). Competition in all manufacturing sectors is increasing, and there is continuous pressure to drive costs down and to increase cost management. Good cost management improves profits and margins, improves management control and opens the door to becoming a world-class company. The approach throughout this book looks rigorously at where costs are incurred and proposes projects and targets for cost reduction. This book is designed to provide a well-structured map broken down into simple tasks and achievable goals. This book offers a structured approach to the techniques of cost management, from how costs are calculated by accountants, to the effective use of machines and labor, to the minimization of waste. It begins by looking at traditional methods of accounting and costing and whether these are helpful or accurate for project management. Practical examples of cost management in plastics processing are included, together with many useful flow charts and diagrams to illustrate the points under discussion. Enables plastics processors to institute an effective cost management system, going beyond simply trying to cut costs Provides a holistic perspective on cost management, shining a light on areas on costs which may not have previously been considered or accounted for, and proposing projects and targets for cost reduction Serves as a route map to help companies move toward improved margins and greater profitability
Download or read book Engineering Control Technology Assessment for the Plastics and Resins Industry written by Enviro Control, inc and published by . This book was released on 1978 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plastics Process Analysis Instrumentation and Control written by Johannes Karl Fink and published by John Wiley & Sons. This book was released on 2021-03-09 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on plastics process analysis, instrumentation for modern manufacturing in the plastics industry. Process analysis is the starting point since plastics processing is different from processing of metals, ceramics, and other materials. Plastics materials show unique behavior in terms of heat transfer, fluid flow, viscoelastic behavior, and a dependence of the previous time, temperature and shear history which determines how the material responds during processing and its end use. Many of the manufacturing processes are continuous or cyclical in nature. The systems are flow systems in which the process variables, such as time, temperature, position, melt and hydraulic pressure, must be controlled to achieve a satisfactory product which is typically specified by critical dimensions and physical properties which vary with the processing conditions. Instrumentation has to be selected so that it survives the harsh manufacturing environment of high pressures, temperatures and shear rates, and yet it has to have a fast response to measure the process dynamics. At many times the measurements have to be in a non-contact mode so as not to disturb the melt or the finished product. Plastics resins are reactive systems. The resins will degrade if the process conditions are not controlled. Analysis of the process allows one to strategize how to minimize degradation and optimize end-use properties.
Download or read book Model Based Cross directional Monitoring and Control of Plastic Film Thickness written by Sung-ho Hur and published by . This book was released on 2010 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main topics of this research are modelling, fault monitoring, and cross-directional control of a plastic film manufacturing process operated by DuPont Teijin Films Ltd. The developed model is of high dimension and built using the first-principles of chemical and mechanical engineering, such as equations for mass transfer, heat transfer, and the flow of viscous fluids in addition to empirical knowledge related to the behaviour of polymer. The model in turn provides a safe off-line platform for developing new cross-directional control and fault monitoring systems. As with other sheet-forming processes, such as papermaking and steel rolling, the plastic film manufacturing process employs large arrays of actuators spread across a continuously moving sheet to control the cross-directional profiles of key product properties. In plastic manufacturing, the main control property is finished product thickness profile as measured by a scanning gauge downstream from the actuators. The role of the cross-directional control system is to maintain the measured cross-directional profiles of plastic properties on target. The second part of this research develops a novel cross-directional controller, which is in turn demonstrated by application to the first-principles model. Fault monitoring systems can be broadly classified into 3 categories: model-based, data-driven, and knowledge-based. The third part of this research introduces a novel model-based fault monitoring system. The system is demonstrated by application to both the first-principles model and industrial data extracted from the real-life plant.
Download or read book Plastics Processing Data Handbook written by D.V. Rosato and published by Springer. This book was released on 2012-05-04 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive book provides guidelines for maximizing plastics proc essing efficiency in the manufacture of all types of products, using all types of plastics. A practical approach is employed to present fundamental, yet comprehensive, coverage of processing concepts. The information and data presented by the many tables and figures interrelate the different variables that affect injection molding, extrusion, blow molding, thermoforming, compression molding, reinforced plastics molding, rotational molding, re action injection molding, coining, casting, and other processes. The text presents a great number of problems pertaining to different phases of processing. Solutions are provided that will meet product per formance requirements at the lowest cost. Many of the processing variables and their behaviors in the different processes are the same, as they all in volve basic conditions of temperature, time, and pressure. The book begins with information applicable to all processes, on topics such as melt soft ening flow and controls; all processes fit into an overall scheme that re quires the interaction and proper control of systems. Individual processes are reviewed to show the effects of changing different variables to meet the goal of zero defects. The content is arranged to provide a natural progres sion from simple to complex situations, which range from control of a sin gle manual machine to simulation of sophisticated computerized processes that interface with many different processing functions.
Download or read book Total Quality Process Control for Injection Molding written by M. Joseph Gordon, Jr. and published by John Wiley & Sons. This book was released on 2010-03-25 with total page 766 pages. Available in PDF, EPUB and Kindle. Book excerpt: The all-encompassing guide to total quality process control for injection molding In the same simple, easy-to-understand language that marked the first edition, Total Quality Process Control for Injection Molding, Second Edition lays out a successful plan for producing superior plastic parts using high-quality controls. This updated edition is the first of its kind to zero in on every phase of the injection molding process, the most commonly used plastics manufacturing method, with an all-inclusive strategy for excellence. Beginning with sales and marketing, then moving forward to cover finance, purchasing, design, tooling, manufacturing, assembly, decorating, and shipping, the book thoroughly covers each stage to illustrate how elevated standards across individual departments relate to result in the creation of a top-notch product. This Second Edition: Details ways to improve plastic part design and quality Includes material and process control procedures to monitor quality through the entire manufacturing system Offers detailed information on machinery and equipment and the implementation of quality assurance methods—content that is lacking in similar books Provides problem-analysis techniques and troubleshooting procedures Includes updates that cover Six Sigma, ISO 9000, and TS 16949, which are all critical for quality control; computer-guided process control techniques; and lean manufacturing methods With proven ways to problem-solve, increase performance, and ensure customer satis-faction, this valuable guide offers the vital information today's managers need to plan and implement quality process control—and produce plastic parts that not only meet, but surpass expectations.
Download or read book Polymer Processing written by Donald G. Baird and published by John Wiley & Sons. This book was released on 2014-03-24 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamental concepts coupled with practical, step-by-step guidance With its emphasis on core principles, this text equips readers with the skills and knowledge to design the many processes needed to safely and successfully manufacture thermoplastic parts. The first half of the text sets forth the general theory and concepts underlying polymer processing, such as the viscoelastic response of polymeric fluids and diffusion and mass transfer. Next, the text explores specific practical aspects of polymer processing, including mixing, extrusion dies, and post-die processing. By addressing a broad range of design issues and methods, the authors demonstrate how to solve most common processing problems. This Second Edition of the highly acclaimed Polymer Processing has been thoroughly updated to reflect current polymer processing issues and practices. New areas of coverage include: Micro-injection molding to produce objects weighing a fraction of a gram, such as miniature gears and biomedical devices New chapter dedicated to the recycling of thermoplastics and the processing of renewable polymers Life-cycle assessment, a systematic method for determining whether recycling is appropriate and which form of recycling is optimal Rheology of polymers containing fibers Chapters feature problem sets, enabling readers to assess and reinforce their knowledge as they progress through the text. There are also special design problems throughout the text that reflect real-world polymer processing issues. A companion website features numerical subroutines as well as guidance for using MATLAB®, IMSL®, and Excel to solve the sample problems from the text. By providing both underlying theory and practical step-by-step guidance, Polymer Processing is recommended for students in chemical, mechanical, materials, and polymer engineering.
Download or read book Polymer Processing written by Tim A. Osswald and published by . This book was released on 2006 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt:
