Download or read book Materials for Architects and Builders written by Arthur Lyons and published by Routledge. This book was released on 2010-08-31 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: A necessary purchase for level 1 and 2 undergraduates studying building/ construction materials modules, Materials for Architects and Builders provides an introduction to the broad range of materials used within the construction industry and contains information pertaining to their manufacture, key physical properties, specification and uses. Construction Materials is a core module on all undergraduate and diploma construction-related courses and this established textbook is illustrated in colour throughout with many photographs and diagrams to help students understand the key principles. This new edition has been completely revised and updated to include the latest developments in materials, appropriate technologies and relevant legislation. The current concern for the ecological effects of building construction and lifetime use are reflected in the emphasis given to sustainability and recycling. An additional chapter on sustainability and governmental carbon targets reinforces this issue.
Download or read book Construction Materials Reference Book written by David Doran and published by Routledge. This book was released on 2013-07-24 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the definitive reference source for professionals involved in the conception, design and specification stages of a construction project. The theory and practical aspects of each material is covered, with an emphasis being placed on properties and appropriate use, enabling broader, deeper understanding of each material leading to greater confidence in their application. Containing fifty chapters written by subject specialists, Construction Materials Reference Book covers the wide range of materials that are encountered in the construction process, from traditional materials such as stone through masonry and steel to advanced plastics and composites. With increased significance being placed on broader environmental issues, issues of whole life cost and sustainability are covered, along with health and safety aspects of both use and installation.
Download or read book Plastics Pipes and Fittings for Non Pressure Applications Utilisation of Non Virgin PVC U PP and PE Materials written by British Standards Institute Staff and published by . This book was released on 2007-05-31 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pipes, Pipe fittings, Plastics, Plastic pipelines, Recycling, Re-usable, Polyvinyl chloride, Unplasticized polyvinyl chloride, Polypropylene, Polyethylene, Properties
Download or read book Guide for Addressing Environmental Issues in Product Standards written by International Organization for Standardization and published by . This book was released on 2008 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plastics in Pressure Pipes written by T. Stafford and published by iSmithers Rapra Publishing. This book was released on 1998 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this report the developmental history, an overview of the current plastic pipe market and some of the practical problems encountered in laying new pipelines are covered initially. The author explains the design considerations involved in a new pipeline, he details fluid flow, safe pressure containment, the life expectancy of the system, how and where it is to be laid, what level of damage tolerance is acceptable as well as some of the specifications and test methods used within plastic pipe design. An additional indexed section containing several hundred abstracts from the Rapra Polymer Library database provides useful references for further reading.
Download or read book Handbook of Polyethylene Pipe written by and published by Plastics Pipe Institute. This book was released on 2012-02 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: Published by the Plastics Pipe Institute (PPI), the Handbook describes how polyethylene piping systems continue to provide utilities with a cost-effective solution to rehabilitate the underground infrastructure. The book will assist in designing and installing PE piping systems that can protect utilities and other end users from corrosion, earthquake damage and water loss due to leaky and corroded pipes and joints.
Download or read book Piping Handbook written by Mohinder L. Nayyar and published by McGraw Hill Professional. This book was released on 1999-11-04 with total page 2520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Instant answers to your toughest questions on piping components and systems! It's impossible to know all the answers when piping questions are on the table - the field is just too broad. That's why even the most experienced engineers turn to Piping Handbook, edited by Mohinder L. Nayyar, with contribution from top experts in the field. The Handbook's 43 chapters--14 of them new to this edition--and 9 new appendices provide, in one place, everything you need to work with any type of piping, in any type of piping system: design layout selection of materials fabrication and components operation installation maintenance This world-class reference is packed with a comprehensive array of analytical tools, and illustrated with fully-worked-out examples and case histories. Thoroughly updated, this seventh edition features revised and new information on design practices, materials, practical applications and industry codes and standards--plus every calculation you need to do the job.
Download or read book Thomas Register of American Manufacturers written by and published by . This book was released on 2003 with total page 2142 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vols. for 1970-71 includes manufacturers catalogs.
Download or read book Thomas Register of American Manufacturers and Thomas Register Catalog File written by and published by . This book was released on 2002 with total page 1928 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vols. for 1970-71 includes manufacturers' catalogs.
Download or read book Handbook of PVC Pipe Design and Construction written by Uni-Bell PVC Pipe Association and published by . This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Most Thorough and Far-reaching Revision Yet! The new 5th edition of the Handbook of PVC Pipe Design and Construction is the most comprehensive and up-to-date reference on PVC pipe and fittings. It provides practical engineering and construction information. It includes recommendations applicable to the design and use of primarily underground PVC piping systems in both pressure and non-pressure applications. Previous editions have been used by engineers all across North America and around the globe in the utility and consulting engineering sectors, as well as in universities and technical institutions. New to the Fifth Edition Four new chapters PVC Pressure Pipe Installation PVC Non-Pressure Pipe Installation Trenchless Installation of PVC Pipe Molecularly Oriented Polyvinyl Chloride Pipe (PVCO) Updated and improved graphs and tables More open page format The collaborative result of thousands of hours of research and review, the contents of the 5th edition are numerically formatted by section and subsection, as well as by figure and table designation. This allows easy reference and quick access. The Handbook of PVC Pipe Design and Construction is a must-have reference for design engineers, public and private pipe utility managers, and students. A more complete text on PVC pipe is not available.
Download or read book Extrusion written by Harold F. Giles Jr and published by William Andrew. This book was released on 2013-09-21 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of Extrusion is designed to aid operators, engineers, and managers in extrusion processing in quickly answering practical day-to-day questions. The first part of the book provides the fundamental principles, for operators and engineers, of polymeric materials extrusion processing in single and twin screw extruders. The next section covers advanced topics including troubleshooting, auxiliary equipment, and coextrusion for operators, engineers, and managers. The final part provides applications case studies in key areas for engineers such as compounding, blown film, extrusion blow molding, coating, foam, and reprocessing. This practical guide to extrusion brings together both equipment and materials processing aspects. It covers basic and advanced topics, for reference and training, in thermoplastics processing in the extruder. Detailed reference data are provided on such important operating conditions as temperatures, start-up procedures, shear rates, pressure drops, and safety. - A practical guide to the selection, design and optimization of extrusion processes and equipment - Designed to improve production efficiency and product quality - Focuses on practical fault analysis and troubleshooting techniques
Download or read book Handbook on Pressurized Irrigation Techniques written by Andreas Phocaides and published by Food & Agriculture Org.. This book was released on 2007 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Increasing the efficiency of water use and enhancing agricultural water productivity at all levels of the production chains are becoming priorities in a growing number of countries. In particular, shifting to modern on-farm irrigation practices can contribute to a substantial increase in both water use efficiency and water productivity. The objective of this handbook is to provide a practical guide on the use of pressurized irrigation techniques to farmers, irrigation technicians, and extension workers in the field. In this second edition, the handbook has been considerably revised, including new chapters on low-cost drip irrigation and pipe distribution systems for smallholders.--Publisher's description.
Download or read book Materials written by Michael F. Ashby and published by Butterworth-Heinemann. This book was released on 2013-10-09 with total page 899 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials, Third Edition, is the essential materials engineering text and resource for students developing skills and understanding of materials properties and selection for engineering applications. This new edition retains its design-led focus and strong emphasis on visual communication while expanding its inclusion of the underlying science of materials to fully meet the needs of instructors teaching an introductory course in materials. A design-led approach motivates and engages students in the study of materials science and engineering through real-life case studies and illustrative applications. Highly visual full color graphics facilitate understanding of materials concepts and properties. For instructors, a solutions manual, lecture slides, online image bank, and materials selection charts for use in class handouts or lecture presentations are available at http://textbooks.elsevier.com. The number of worked examples has been increased by 50% while the number of standard end-of-chapter exercises in the text has been doubled. Coverage of materials and the environment has been updated with a new section on Sustainability and Sustainable Technology. The text meets the curriculum needs of a wide variety of courses in the materials and design field, including introduction to materials science and engineering, engineering materials, materials selection and processing, and materials in design. - Design-led approach motivates and engages students in the study of materials science and engineering through real-life case studies and illustrative applications - Highly visual full color graphics facilitate understanding of materials concepts and properties - Chapters on materials selection and design are integrated with chapters on materials fundamentals, enabling students to see how specific fundamentals can be important to the design process - For instructors, a solutions manual, lecture slides, online image bank and materials selection charts for use in class handouts or lecture presentations are available at http://textbooks.elsevier.com - Links with the Cambridge Engineering Selector (CES EduPack), the powerful materials selection software. See www.grantadesign.com for information NEW TO THIS EDITION: - Text and figures have been revised and updated throughout - The number of worked examples has been increased by 50% - The number of standard end-of-chapter exercises in the text has been doubled - Coverage of materials and the environment has been updated with a new section on Sustainability and Sustainable Technology
Download or read book Plastics Materials and Processes written by Charles A. Harper and published by John Wiley & Sons. This book was released on 2003-10-10 with total page 1008 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics Materials and Processes: A Concise Encyclopedia is a resource for anyone with an interest in plastic materials and processes, from seasoned professionals to laypeople. Arranged in alphabetical order, it clearly explains all of the materials and processes as well as their major application areas and usages. Plastics Materials and Processes: A Concise Encyclopedia: Discusses and describes applications and practical uses of the materials and processes. Clear definitions and sufficient depth to satisfy the information seekers needs
Download or read book Polyethylene PE Plastic Pipe written by and published by . This book was released on 1970 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Piping and Pipeline Calculations Manual written by Philip Ellenberger and published by Elsevier. This book was released on 2014-01-22 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: Piping and Pipeline Calculations Manual, Second Edition provides engineers and designers with a quick reference guide to calculations, codes, and standards applicable to piping systems. The book considers in one handy reference the multitude of pipes, flanges, supports, gaskets, bolts, valves, strainers, flexibles, and expansion joints that make up these often complex systems. It uses hundreds of calculations and examples based on the author's 40 years of experiences as both an engineer and instructor. Each example demonstrates how the code and standard has been correctly and incorrectly applied. Aside from advising on the intent of codes and standards, the book provides advice on compliance. Readers will come away with a clear understanding of how piping systems fail and what the code requires the designer, manufacturer, fabricator, supplier, erector, examiner, inspector, and owner to do to prevent such failures. The book enhances participants' understanding and application of the spirit of the code or standard and form a plan for compliance. The book covers American Water Works Association standards where they are applicable. - Updates to major codes and standards such as ASME B31.1 and B31.12 - New methods for calculating stress intensification factor (SIF) and seismic activities - Risk-based analysis based on API 579, and B31-G - Covers the Pipeline Safety Act and the creation of PhMSA
Download or read book Plastic Waste and Recycling written by Trevor Letcher and published by Academic Press. This book was released on 2020-03-10 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastic Waste and Recycling: Environmental Impact, Societal Issues, Prevention, and Solutions begins with an introduction to the different types of plastic materials, their uses, and the concepts of reduce, reuse and recycle before examining plastic types, chemistry and degradation patterns that are organized by non-degradable plastic, degradable and biodegradable plastics, biopolymers and bioplastics. Other sections cover current challenges relating to plastic waste, explain the sources of waste and their routes into the environment, and provide systematic coverage of plastic waste treatment methods, including mechanical processing, monomerization, blast furnace feedstocks, gasification, thermal recycling, and conversion to fuel. This is an essential guide for anyone involved in plastic waste or recycling, including researchers and advanced students across plastics engineering, polymer science, polymer chemistry, environmental science, and sustainable materials. - Presents actionable solutions for reducing plastic waste, with a focus on the concepts of collection, re-use, recycling and replacement - Considers major societal and environmental issues, providing the reader with a broader understanding and supporting effective implementation - Includes detailed case studies from across the globe, offering unique insights into different solutions and approaches
