Download or read book Fundamentals of Plastics Thermoforming written by Peter Klein and published by Springer Nature. This book was released on 2022-06-01 with total page 83 pages. Available in PDF, EPUB and Kindle. Book excerpt: The process of heating and reshaping plastics sheet and film materials has been in use since the beginning of the plastics industry. This process is known as thermoforming. Today this process is used for industrial products including signage, housings, and hot tubs. It also produces much of the packaging in use today including blister packs, egg cartons, and food storage containers. This process has many advantages over other methods of producing these products, but it has some limitations. This book has a twofold purpose. It is designed to be used as a text book for a course on thermoforming. It is also intended to be an application guide for professionals in the field of thermoforming including manufacturing, process and quality engineers, and managers. This book is focused on process application rather than theory. It refers to real products and processes with the intent of understanding the real issues faced in this industry. In addition to materials and processes, part and tool design are covered. Quality control is critical to any operation and this is also covered in this text. Two areas of focus in today's industry include Lean operations and environmental issues. Both of these topics are also included. Table of Contents: Introduction / Plastics Materials / Thermoforming Process Overview / The Forming Process / Part Design Mold / Tool Design / Quality Control Issues / Lean Operations / Environmental Issues

Download or read book Plastic Forming Processes written by Maurice Reyne and published by John Wiley & Sons. This book was released on 2013-03-01 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics may undergo an industrial treatment for many reasons including strength, chemical inertness, biodegradability, and heat resistance. Providing an overview of the various treatments utilized in the plastics industry, this title examines the numerous treatments in use as well as the differences in treatments based on the type of plastic and the type of component being treated.

Download or read book Plastics Forming written by John D. Beadle and published by . This book was released on 1971 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book SPI Plastics Engineering Handbook of the Society of the Plastics Industry Inc written by Michael L. Berins and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1139 pages. Available in PDF, EPUB and Kindle. Book excerpt: I am pleased to present the Fifth Edition of the Plastics Engineering Handbook. Last published in 1976, this version of the standard industry reference on plastics processing incorporates the numerous revisions and additions necessitated by 14 years of activity in a dynamic industry. At that last printing, then-SPI President Ralph L. Harding, Jr. anticipated that plastics pro duction would top 26 billion pounds in 1976 (up from 1.25 billion in 1947, when the First Edition of this book was issued). As I write, plastics production in the United States had reached almost 60 billion pounds annually. Indeed, the story of the U.S. plastics industry always has been one of phenomenal growth and unparalleled innovation. While these factors make compilation of a book such as this difficult, they also make it necessary. Thus I acknowledge all those who worked to gather and relate the information included in this 1991 edition and thank them for the effort it took to make the Plastics Engineering Handbook a definitive source and invaluable tool for our industry. Larry L. Thomas President The Society of the Plastics Industry, Inc.

Download or read book Thermoforming written by Geza Gruenwald and published by Routledge. This book was released on 2018-05-04 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: FROM THE FOREWORD Dr. Gruenwald has indicated the desirable properties of polymerics for differing applications; thus, his text is especially useful for polymer chemists who must ""tailor"" plastic materials for specific groups of applications. Engineers in extruding and calendering film and sheet will benefit from the intimate relationships elucidated between processing parameters imposed upon stocks employed in thermoforming and the products thereof. Mold designers are provided with a complete guide that will enable them to avoid the less obvious pitfalls and wasted effort so often experienced in the evolution of molds for (especially) complex parts.. Quite likely, Dr. Gruenwald's suggestions willl lead to considerable benefits to those who read and practice by this remarkable exposition of thermoforming technology. Robert K. Jordan Director-Metalliding Institute, Director-Engineering Research Institute, Scientist in Residence, Gannon University

Download or read book Design and Manufacturing of Plastics Products written by Antonio Pouzada and published by William Andrew. This book was released on 2021-08-14 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and Manufacturing of Plastics Products: Integrating Conventional Methods and Innovative Technologies brings together detailed information on design, materials selection, properties, manufacturing, and the performance of plastic products, incorporating the utilization of the latest novel techniques and additive manufacturing technologies. The book integrates the design of molded products and conventional manufacturing and molding techniques with recent additive manufacturing techniques to produce performant products and cost-effective tools. Key areas of innovation are explained in detail, including hybrid molds, the integration of processing options with product properties and performance, and sustainability factors such as eco-design strategies, recycling, and lifecycle assessment. Other sections cover the development of plastics products, including design methodologies, design solutions specific to plastics, and design for re-use, as well as manufacturing and performance, with an emphasis on thermoplastic molding techniques, recent advances on plastics tooling, and the appraisal of the influence of processing options on product performance. This is a valuable resource to plastics engineers, design engineers, mold makers, and product or part designers across industries. It will also be of interest to researchers and advanced students in plastics engineering, polymer science, additive manufacturing and mechanical engineering. Offers a thorough grounding in plastics part design, thermoplastic material selection, properties, manufacture and performance of plastic parts Presents the latest advances, including the integration of additive manufacturing in the plastics product development cycle, hybrid molds, and lifecycle and recycling considerations Enables the reader to utilize traditional methods alongside cutting-edge technologies in the production of performant plastic products and parts

Download or read book The Secrets of Building a Plastic Vacuum Forming Machine written by Vincent R. Gingery and published by David J Gingery. This book was released on 1999-01-01 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Practical Thermoforming Principles and Applications written by Florian and published by CRC Press. This book was released on 1996-08-09 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Provides in-depth coverage of the entire thermoforming molding process from market domain and materials options to manufacturing methods and peripheral support. Second Edition furnishes entirely new information on twin sheet forming, corrugated tubing and pipe manufacturin gtechniques, plastics recycling, forthcoming equipment, and energy and labor costs."

Download or read book Plastics Processing Technology written by Edward A. Muccio and published by ASM International. This book was released on 1994-01-01 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a basic understanding of plastics processing technology at a level suitable for technicians, managers, buyers, quality assurance personnel, and engineers who have minimal experience with plastics. Highlights the key aspects of materials, thermodynamics, fluid technology, control, and tool/p

Download or read book Handbook of Plastic Processes written by Charles A. Harper and published by John Wiley & Sons. This book was released on 2006-05-26 with total page 755 pages. Available in PDF, EPUB and Kindle. Book excerpt: An outstanding and thorough presentation of the complete field of plastics processing Handbook of Plastic Processes is the only comprehensive reference covering not just one, but all major processes used to produce plastic products-helping designers and manufacturers in selecting the best process for a given product while enabling users to better understand the performance characteristics of each process. The authors, all experts in their fields, explain in clear, concise, and practical terms the advantages, uses, and limitations of each process, as well as the most modern and up-to-date technologies available in their application. Coverage includes chapters on: Injection molding Compression and transfer molding Sheet extrusion Blow molding Calendering Foam processing Reinforced plastics processing Liquid resin processing Rotational molding Thermoforming Reaction injection molding Compounding, mixing, and blending Machining and mechanical fabrication Assembly, finishing, and decorating Each chapter details a particular process, its variations, the equipment used, the range of materials utilized in the process, and its advantages and limitations. Because of its increasing impact on the industry, the editor has also added a chapter on nanotechnology in plastics processing.

Download or read book Concise Encyclopedia of Plastics written by Marlene G. Rosato and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: After over a century of worldwide production of all kinds trol persons, cost estimators, buyers, vendors, consultants, of products, the plastics industry is now the fourth largest and others. industry in the United States. This brief, concise, and prac The bulk of the book is the alphabetical listing of en tical book is a cutting edge compendium of the plastics tries. Preceding those entries is A Plastics Overview: Fig industry's information and terminology-ranging from ures and Tables (which presents eight summary guides on design, materials, and processes, to testing, quality control, the subjects examined in the text) and then the World of regulations, legal matters, and profitability. New and use Plastics Reviews (which presents 14 articles that provide ful developments in plastic materials and processing con general introductory information, comprehensive updates, tinually are on the horizon, and the examples of these de and important networking avenues within the world of velopments that are discussed in the book provide guides plastics). Following the alphabetical listing of entries, at the to past and future trends. end of the encyclopedia, seven appendices provide back This practical and comprehensive book reviews the ground and source guide information keyed to the text of the book. The extensive and useful Appendix A, List of plastics industry virtually from A to Z through its more than 25,000 entries. Its concise entries cover the basic is Abbreviations, lists all abbreviations used in the text.

Download or read book Plastics Institute of America Plastics Engineering Manufacturing Data Handbook written by D.V. Rosato and published by Springer Science & Business Media. This book was released on 2001-11-30 with total page 864 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a simplified, practical, and innovative approach to understanding the design and manufacture of plastic products in the World of Plastics. The concise and comprehensive information defines and focuses on past, current, and future technical trends. The handbook reviews over 20,000 different subjects; and contains over 1,000 figures and more than 400 tables. Various plastic materials and their behavior patterns are reviewed. Examples are provided of different plastic products and relating to them critical factors that range from meeting performance requirements in different environments to reducing costs and targeting for zero defects. This book provides the reader with useful pertinent information readily available as summarized in the Table of Contents, List of References and the Index.

Download or read book Essential Manufacturing written by Gordon Mair and published by John Wiley & Sons. This book was released on 2019-04-08 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to the manufacturing industry Essential Manufacturing provides a comprehensive introduction to the wide breadth of the manufacturing industry. There is a need for all engineering and business students to understand the importance and context of the manufacturing industry. An engineer should have a well rounded appreciation of all aspects of the industry they work in, including manufacturing. This is evidenced by professional bodies expecting all accredited engineering courses to provide students with a background that allows them to see their own specific discipline in context. Similarly, business students will often find themselves dealing in some way with manufactured products or even be directly involved in manufacturing operations management. This book will cover the full spectrum of the manufacturing industry to provide a holistic appreciation of the topic but with enough detail to be of practical use. The book begins with an introduction to the manufacturing industry, its history, and some important manufacturing concepts. The materials used in manufacturing and how they are produced are covered. This is followed by a more detailed description of the more common manufacturing processes, their application, and the types of automation used in the manufacturing industry. Consideration is then given to the important aspects of manufacturing operations management and production planning and control, work study, and manufacturing economics. How to maintain quality in the manufacturing process, including metrology, is examined and this is followed by human factors in manufacturing. Finally, a speculative look at the future of manufacturing is included. Key features: Takes a self-contained approach. Includes review questions. Suitable as an introduction for more advanced study. Satisfies the requirements of college and first and second year university engineering courses. The book provides a comprehensive, concise introduction to the manufacturing industry for engineering and management students.

Download or read book Fundamentals of Plastics Thermoforming written by Peter Klein and published by Springer. This book was released on 2024-08-14 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition serves as a foundational guide to plastics thermoforming, covering the essential topics of the industry today. The authors take a process application approach to the topic, rather than focusing on theory. The book explains materials and processes, as well as part and tool design. This second edition includes thorough discussion of green plastics within an expanded chapter on environmental issues. The authors also cover quality control, which is critical to any operation. The book provides information about actual products and processes with the intent of understanding practical issues in the industry, which makes the book a valuable resource for students and professionals in the field of thermoforming, including manufacturing, managers, process engineers, and quality engineers. This second edition expands upon the original book and brings it up to date with additional data and key updates.

Download or read book Plastic Sheet Forming written by Robert L. Butzko and published by . This book was released on 1961 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Materials Design and Manufacturing for Lightweight Vehicles written by P.K. Mallick and published by Elsevier. This book was released on 2010-03-01 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research into the manufacture of lightweight automobiles is driven by the need to reduce fuel consumption to preserve dwindling hydrocarbon resources without compromising other attributes such as safety, performance, recyclability and cost. Materials, design and manufacturing for lightweight vehicles will make it easier for engineers to not only learn about the materials being considered for lightweight automobiles, but also to compare their characteristics and properties.Part one discusses materials for lightweight automotive structures with chapters on advanced steels for lightweight automotive structures, aluminium alloys, magnesium alloys for lightweight powertrains and automotive structures, thermoplastics and thermoplastic matrix composites and thermoset matrix composites for lightweight automotive structures. Part two reviews manufacturing and design of lightweight automotive structures covering topics such as manufacturing processes for light alloys, joining for lightweight vehicles, recycling and lifecycle issues and crashworthiness design for lightweight vehicles.With its distinguished editor and renowned team of contributors, Materials, design and manufacturing for lightweight vehicles is a standard reference for practicing engineers involved in the design and material selection for motor vehicle bodies and components as well as material scientists, environmental scientists, policy makers, car companies and automotive component manufacturers. Provides a comprehensive analysis of the materials being used for the manufacture of lightweight vehicles whilst comparing characteristics and properties Examines crashworthiness design issues for lightweight vehicles and further emphasises the development of lightweight vehicles without compromising safety considerations and performance Explores the manufacturing process for light alloys including metal forming processes for automotive applications

Download or read book Plastics Technology Handbook written by Don Rosato and published by Momentum Press. This book was released on 2010-10-22 with total page 1458 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive handbook provides a simplified, practical and innovative approach to understanding the design and manufacture of plastic products. It will expand the reader's understanding of plastics technology by defining and focusing on past, current, and future technical trends. Published in 2 volumes, the content is presented so that both technical and non-technical readers can understand the interrelationships of materials to processes. Different plastic products are examined and their related critical factors are shown, from meeting performance requirements in different environments, to reducing costs and targeting for zero defects. Examples used include small to large, and simple to complex shapes. Information is included on static properties (tensile, flexural), dynamic properties (creep, fatigue, impact) and physical and chemical properties. Extensive reference sources and useful data and physical and chemical constants are also provided. Volume 1 sets out the basic principles of polymers, what they are and how plastics are formulated, processed, and manufactured.