Download or read book Extrusion written by Harold F. Giles Jr and published by William Andrew. This book was released on 2013-09-21 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of Extrusion is designed to aid operators, engineers, and managers in extrusion processing in quickly answering practical day-to-day questions. The first part of the book provides the fundamental principles, for operators and engineers, of polymeric materials extrusion processing in single and twin screw extruders. The next section covers advanced topics including troubleshooting, auxiliary equipment, and coextrusion for operators, engineers, and managers. The final part provides applications case studies in key areas for engineers such as compounding, blown film, extrusion blow molding, coating, foam, and reprocessing. This practical guide to extrusion brings together both equipment and materials processing aspects. It covers basic and advanced topics, for reference and training, in thermoplastics processing in the extruder. Detailed reference data are provided on such important operating conditions as temperatures, start-up procedures, shear rates, pressure drops, and safety. - A practical guide to the selection, design and optimization of extrusion processes and equipment - Designed to improve production efficiency and product quality - Focuses on practical fault analysis and troubleshooting techniques

Download or read book Applied Plastics Engineering Handbook written by Myer Kutz and published by William Andrew. This book was released on 2016-09-15 with total page 786 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applied Plastics Engineering Handbook: Processing, Materials, and Applications, Second Edition, covers both the polymer basics that are helpful to bring readers quickly up-to-speed if they are not familiar with a particular area of plastics processing and the recent developments that enable practitioners to discover which options best fit their requirements. New chapters added specifically cover polyamides, polyimides, and polyesters. Hot topics such as 3-D printing and smart plastics are also included, giving plastics engineers the information they need to take these embryonic technologies and deploy them in their own work. With the increasing demands for lightness and fuel economy in the automotive industry (not least due to CAFÉ standards), plastics will soon be used even further in vehicles. A new chapter has been added to cover the technology trends in this area, and the book has been substantially updated to reflect advancements in technology, regulations, and the commercialization of plastics in various areas. Recycling of plastics has been thoroughly revised to reflect ongoing developments in sustainability of plastics. Extrusion processing is constantly progressing, as have the elastomeric materials, fillers, and additives which are available. Throughout the book, the focus is on the engineering aspects of producing and using plastics. The properties of plastics are explained, along with techniques for testing, measuring, enhancing, and analyzing them. Practical introductions to both core topics and new developments make this work equally valuable for newly qualified plastics engineers seeking the practical rules-of-thumb they don't teach you in school and experienced practitioners evaluating new technologies or getting up-to-speed in a new field. - Presents an authoritative source of practical advice for engineers, providing guidance from experts that will lead to cost savings and process improvements - Ideal introduction for both new engineers and experienced practitioners entering a new field or evaluating a new technology - Updated to include the latest technology, including 3D Printing, smart polymers, and thorough coverage of biopolymers and biodegradable plastics

Download or read book Plastics Technology Handbook Fourth Edition written by Manas Chanda and published by CRC Press. This book was released on 2006-12-19 with total page 890 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because the field of plastics is one of the fastest changing areas today, the need arises to offer relevant, comprehensive material on polymers. An established source of information on modern plastics, the Plastics Technology Handbook continues to provide up-to-date coverage on the properties, processing methods, and applications of polymers. Retaining the easy-to-follow structure of the previous editions, this fourth edition includes new topics of interest that reflect recent developments and lead to better insights into the molecular behavior of polymers. New to the Fourth Edition Advances in supramolecular polymerization, flame retardancy, polymer-based nanomedicines, and drug delivery The new concept of oxo-biodegradable polymers Broadened discussion on plastic foams and foam extrusion processes More information on the processing and applications of industrial polymers, including the emerging field of nanoblends Developments in polymer synthesis and applications, such as polymeric sensors, hydrogels and smart polymers, hyperbranched polymers, shape memory polymers, polymeric optical fibers, scavenger resins, polymer nanocomposites, polymerization-filled composites, and wood-polymer composites A state-of-the-art account of the various available methods for plastics recycling Advances in the use of polymers in packaging, construction, the automotive and aerospace industries, agriculture, electronics and electrical technology, biomedical applications, corrosion prevention, and sports and marine applications Plastics Technology Handbook, Fourth Edition thoroughly covers traditional industrial polymers and their processing methods as well as contemporary polymeric materials, recent trends, and the latest applications.

Download or read book Extrusion written by Harold F. Giles Jr and published by William Andrew. This book was released on 2004-12-31 with total page 575 pages. Available in PDF, EPUB and Kindle. Book excerpt: Why is it important to get to equilibrium and how long does it take? Are there problems running polypropylene profiles on a single screw extruder? Does the job involve compounding color concentrates on a corotating twin screw extruder? This unique reference work is designed to aid operators, engineers, and managers in quickly answering such practical day-to-day questions in extrusion processing. This comprehensive volume is divided into 7 Parts. It contains detailed reference data on such important operating conditions as temperatures, start-up procedures, shear rates, pressure drops, and safety. This reference is a practical guide to extrusion bringing together both the equipment and materials processing aspects. It provides basic and advanced topics about the thermoplastics processing in the extruder, for reference and training. Parts 1 û 3, emphasize the fundamentals, for operators and engineers, of polymeric materials extrusion processing in single and twin screw extruders. Parts 4 û 7 treat advanced topics including troubleshooting, auxiliary equipment, and coextrusion for operators, engineers, and managers. Extensive applications in Part 7 cover such contemporary areas as compounding, blown film, extrusion blow molding, coating, foam, and reprocessing. Each chapter includes review topics.

Download or read book Twin Screw Extrusion written by James Lindsay White and published by Hanser Gardner Publications. This book was released on 2010 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: Twin screw extrusion has become an important part of polymer processing technology. Twin screw extruders are widely used for reactive, procesing, including both polymerization and grafting reactions, for compounding, blending, devolatilization, as well as for thermoplastic final shaping operations, particularly profile extrusion. The purpose of this book is to carefully describe each of these three types of machines and the historical development of their technologies. The book also provides insight into the efforts to model/simulate the flow characteristics of these machines and into the experimental studies of their machine characteristics. This book is unique in clearly distinguishing between the different types of twin screw extruders on the market and in reviewing their capabilities. It is the authors' primary intention to provide a balanced but in-depth overview of twin screw extrusion technology to chemists, engineers and technologists alike

Download or read book Extrusion Processing Technology written by Jean-Marie Bouvier and published by John Wiley & Sons. This book was released on 2014-06-23 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extrusion is the operation of forming and shaping a molten or dough-like material by forcing it through a restriction, or die. It is applied and used in many batch and continuous processes. However, extrusion processing technology relies more on continuous process operations which use screw extruders to handle many process functions such as the transport and compression of particulate components, melting of polymers, mixing of viscous media, heat processing of polymeric and biopolymeric materials, product texturization and shaping, defibering and chemical impregnation of fibrous materials, reactive extrusion, and fractionation of solid-liquid systems. Extrusion processing technology is highly complex, and in-depth descriptions and discussions are required in order to provide a complete understanding and analysis of this area: this book aims to provide readers with these analyses and discussions. Extrusion Processing Technology: Food and Non-Food Biomaterials provides an overview of extrusion processing technology and its established and emerging industrial applications. Potency of process intensification and sustainable processing is also discussed and illustrated. The book aims to span the gap between the principles of extrusion science and the practical knowledge of operational engineers and technicians. The authors bring their research and industrial experience in extrusion processing technology to provide a comprehensive, technical yet readable volume that will appeal to readers from both academic and practical backgrounds. This book is primarily aimed at scientists and engineers engaged in industry, research, and teaching activities related to the extrusion processing of foods (especially cereals, snacks, textured and fibrated proteins, functional ingredients, and instant powders), feeds (especially aquafeeds and petfoods), bioplastics and plastics, biosourced chemicals, paper pulp, and biofuels. It will also be of interest to students of food science, food engineering, and chemical engineering. Also available Formulation Engineering of Foods Edited by J.E. Norton, P.J. Fryer and I.T. Norton ISBN 978-0-470-67290-7 Food and Industrial Bioproducts and Bioprocessing Edited by N.T. Dunford ISBN 978-0-8138-2105-4 Handbook of Food Process Design Edited by J. Ahmed and M.S. Rahman ISBN 978-1-4443-3011-3

Download or read book Extrusion of Polymers written by Chan I. Chung and published by Carl Hanser Verlag GmbH Co KG. This book was released on 2019-10-07 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: The author presents single-screw extrusion technology together with the relevant polymer fundamentals, with an emphasis on screw design. The presentation begins on a physical level, providing an in-depth conceptual understanding, followed by an analytical level with mathematical models. Practical applications of the mathematical models are illustrated by numerous examples. A brief description of twin-screw extrusion technology is also presented. New in the third edition: a novel patented barrier screw design that eliminates shortcomings of all previous barrier screw designs, more descriptive specific screw design guidelines, a scientifically designed pineapple mixing section, and general improvements and corrections. Contents: • Physical Description of Single-Screw Extrusion • Fundamentals of Polymers and Melt Rheology • Theories of Single-Screw Extrusion and Scale-Up • Screw Design and High Performance Screws • Gear Pumps, Static Mixers, and Dynamic Mixers • Die Design • Viscoelastic Effects in Melt Flow • Special Single-Screw Extruder with Channeled Barrel • Physical Description of Twin-Screw Extruders

Download or read book Brydson s Plastics Materials written by Marianne Gilbert and published by William Andrew. This book was released on 2016-09-27 with total page 894 pages. Available in PDF, EPUB and Kindle. Book excerpt: Brydson's Plastics Materials, Eighth Edition, provides a comprehensive overview of the commercially available plastics materials that bridge the gap between theory and practice. The book enables scientists to understand the commercial implications of their work and provides engineers with essential theory. Since the previous edition, many developments have taken place in plastics materials, such as the growth in the commercial use of sustainable bioplastics, so this book brings the user fully up-to-date with the latest materials, references, units, and figures that have all been thoroughly updated. The book remains the authoritiative resource for engineers, suppliers, researchers, materials scientists, and academics in the field of polymers, including current best practice, processing, and material selection information and health and safety guidance, along with discussions of sustainability and the commercial importance of various plastics and additives, including nanofillers and graphene as property modifiers. With a 50 year history as the principal reference in the field of plastics material, and fully updated by an expert team of polymer scientists and engineers, this book is essential reading for researchers and practitioners in this field. - Presents a one-stop-shop for easily accessible information on plastics materials, now updated to include the latest biopolymers, high temperature engineering plastics, thermoplastic elastomers, and more - Includes thoroughly revised and reorganised material as contributed by an expert team who make the book relevant to all plastics engineers, materials scientists, and students of polymers - Includes the latest guidance on health, safety, and sustainability, including materials safety data sheets, local regulations, and a discussion of recycling issues

Download or read book Troubleshooting the Extrusion Process written by María del Pilar Noriega E. and published by Carl Hanser Verlag GmbH Co KG. This book was released on 2019-10-07 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Troubleshooting extrusion problems is one of the most challenging tasks in extrusion operations, requiring a good understanding of the extrusion process and the material properties, good instrumentation, good analysis tools, and a systematic and logical approach. This book addresses all issues crucial in extrusion troubleshooting. Additionally, it includes industrial case studies, richly illustrated with photographs and photomicrographs, used to provide exemplary approaches to efficient problem analysis and problem solving. The interconnectivity between the different relevant knowledge areas such as materials engineering, processing technology, and product development is emphasized. This revised third edition comprises a very significant update, with a great deal of new content, especially focusing on additional case studies as well as new sections on collection and interpretation of extrusion process data, rotational rheometry, the smartphone, how screw design can affect extruder performance, melt temperature variation, recent research on automatic optimization of extruder barrel temperatures, process signal analysis using Fast Fourier Transform, among other topics.

Download or read book Polymer Extrusion written by Chris Rauwendaal and published by Carl Hanser Verlag GmbH Co KG. This book was released on 2014-01-16 with total page 952 pages. Available in PDF, EPUB and Kindle. Book excerpt: Initially published "to bridge the gap between theory and practice in extrusion," this 5th edition of Polymer Extrusion continues to serve the practicing polymer engineer and chemist, providing the theoretical and the practical tools for successful extrusion operations. In its revised and expanded form, it also incorporates the many new developments in extrusion theory and machinery over the last years. Contents · Different Types of Extruders · Extruder Hardware · Instrumentation and Control · Fundamental Principles · Important Polymer Properties · Functional Process Analysis · Extruder Screw Design · Die Design · Twin Screw Extruders · Troubleshooting Extruders · Modeling and Simulation of the Extrusion Process

Download or read book Polymer Processing written by Jean-François Agassant and published by Carl Hanser Verlag GmbH Co KG. This book was released on 2017-08-07 with total page 873 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering of polymers is not an easy exercise: with evolving technology, it often involves complex concepts and processes. This book is intended to provide the theoretical essentials: understanding of processes, a basis for the use of design software, and much more. The necessary physical concepts such as continuum mechanics, rheological behavior and measurement methods, and thermal science with its application to heating-cooling problems and implications for flow behavior are analyzed in detail. This knowledge is then applied to key processing methods, including single-screw extrusion and extrusion die flow, twin-screw extrusion and its applications, injection molding, calendering, and processes involving stretching. With many exercises with solutions offered throughout the book to reinforce the concepts presented, and extensive illustrations, this is an essential guide for mastering the art of plastics processing. Practical and didactic, Polymer Processing: Principles and Modeling is intended for engineers and technicians of the profession, as well as for advanced students in Polymer Science and Plastics Engineering.

Download or read book Energy Management in Plastics Processing written by Robin Kent and published by Elsevier. This book was released on 2018-07-06 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy Management in Plastics Processing: Strategies, Targets, Techniques, and Tools, Third Edition, addresses energy benchmarking and site surveys, how to understand energy supplies and bills, and how to measure and manage energy usage and carbon footprinting. The book's approach highlights the need to reduce the kWh/kg of materials processed and the resulting permanent reductions in consumption and costs. Every topic is covered in a 2-page spread, providing the reader with clear actions and key tips for success. This revised third edition covers new developments in energy management, power supply considerations, automation, assembly operations, water footprinting, and transport considerations, and more. Users will find a practical workbook that not only shows how to reduce energy consumption in all the major plastics shaping processes (moulding, extrusion, forming), but also provides tactics that will benefit other locations in plants (e.g. in factory services and nonmanufacturing areas). - Enables plastics processors in their desire to institute an effective energy management system, both in processing and elsewhere in the plant - Provides a holistic perspective, shining a light on areas where energy management methods may have not been previously considered - Acts as a roadmap to help companies move towards improved sustainability and cost savings

Download or read book Extrusion Dies for Plastics and Rubber written by Christian Hopmann and published by Carl Hanser Verlag GmbH Co KG. This book was released on 2017-04-10 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: This definitive book provides a comprehensive account of the full range of dies used for extrusion of plastics and elastomers. The distinctive features of the various types of dies are described in detail. Expert advice on the configuration of dies is given, and the possibilities of computer-aided design, as well as its limitations, are demonstrated. Fundamentals and computational procedures are clearly explained so that no special prior knowledge of the subject is required. The mechanical configuration, handling, and maintenance of extrusion dies are described. Calibration procedures for pipes and profiles are also discussed. This book was written for plastics engineers who need daily support in their practical work in industry and science, as well as for students preparing for their professional life. The 4th edition is brought up to date with several important additions, including coverage of multilayer (>15 layer) dies, melt encapsulation, and simulation tools (rheological/thermal CFD simulations).

Download or read book Plastics Technology Handbook Third Edition written by Manas Chanda and published by CRC Press. This book was released on 1998-04-10 with total page 1310 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Completely updated and enlarged to reflect the advances that have taken place since the publication of the Second Edition. Third Edition offers concise examinations of the chemical nature, characteristic properties, and uses of traditional industrial polymers, such as acrylics, polyolefins, vinyl polymers, polyesters, epoxies, and silicones, among others."

Download or read book Extrusion in Ceramics written by Frank Händle and published by Springer Science & Business Media. This book was released on 2009-08-12 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Frank Handle ̈ 1.1 What to Expect For some time now, I have been toying around with the idea of writing a book about “Ceramic Extrusion”, because to my amazement I have been unable to locate a single existing, comprehensive rundown on the subject – much in contrast to, say, plastic extrusion and despite the fact that there are some outstanding contributions to be found about certain, individual topics, such as those in textbooks by Reed [1], Krause [2], Bender/Handle ̈ [3] et al. By way of analogy to Woody Allen’s wonderfully ironic movie entitled “Eve- thing You Always Wanted to Know about Sex”, I originally intended to call this book “Everything You Always Wanted to Know about Ceramic Extrusion”, but - ter giving it some extra thought, I eventually decided on a somewhat soberer title. Nevertheless, my companion writers and I have done our best – considering our target group and their motives – not to revert to the kind of jargon that people use when they think the less understandable it sounds, the more scienti c it appears. This book addresses all those who are looking for a lot or a little general or selective information about ceramic extrusion and its sundry aspects. We realize that most of our readers will not be perusing this book just for fun or out of intellectual curiosity, but because they hope to get some use out of it for their own endeavours.

Download or read book Plastics Engineering written by R. J Crawford and published by Butterworth-Heinemann. This book was released on 2020-01-22 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics Engineering, Fourth Edition, presents basic essentials on the properties and processing behaviour of plastics and composites. The book gives engineers and technologists a sound understanding of basic principles without the introduction of unduly complex levels of mathematics or chemistry. Early chapters discuss the types of plastics currently available and describe how designers select a plastic for a particular application. Later chapters guide the reader through the mechanical behaviour of materials, along with a detailed analysis of their major processing techniques and principles. All techniques are illustrated with numerous worked examples within each chapter, with further problems provided at the end.This updated edition has been thoroughly revised to reflect major changes in plastic materials and their processing techniques that have occurred since the previous edition. The plastics and processing techniques addressed within the book have been comprehensively updated to reflect current materials and technologies, with new worked examples and problems also included. - Gives new engineers and technologists a thorough understanding of the essential properties and processing behavior of plastics and composites - Presents a great source of foundational information for students, early-career engineers and researchers - Demonstrates how basic engineering principles in design, mechanics of materials, fluid mechanics and thermodynamics may be applied to the properties, processing and performance of modern plastic materials

Download or read book Handbook of Plastic Processes written by Charles A. Harper and published by John Wiley & Sons. This book was released on 2006-05-26 with total page 755 pages. Available in PDF, EPUB and Kindle. Book excerpt: An outstanding and thorough presentation of the complete field of plastics processing Handbook of Plastic Processes is the only comprehensive reference covering not just one, but all major processes used to produce plastic products-helping designers and manufacturers in selecting the best process for a given product while enabling users to better understand the performance characteristics of each process. The authors, all experts in their fields, explain in clear, concise, and practical terms the advantages, uses, and limitations of each process, as well as the most modern and up-to-date technologies available in their application. Coverage includes chapters on: Injection molding Compression and transfer molding Sheet extrusion Blow molding Calendering Foam processing Reinforced plastics processing Liquid resin processing Rotational molding Thermoforming Reaction injection molding Compounding, mixing, and blending Machining and mechanical fabrication Assembly, finishing, and decorating Each chapter details a particular process, its variations, the equipment used, the range of materials utilized in the process, and its advantages and limitations. Because of its increasing impact on the industry, the editor has also added a chapter on nanotechnology in plastics processing.