Download or read book Plastics Product Design Engineering Handbook written by Sidney Levy and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics have become increasingly important in the products used in our society, ranging from housing to packaging, transportation, business machines and especially in medicine and health products. Designing plastic parts for this wide range of uses has become a major activity for designers, architects, engineers, and others who are concerned with product development. Because plastics are unique materials with a broad range of proper ties they are adaptable to a variety of uses. The uniqueness of plastics stems from their physical characteristics which are as different from metals, glasses, and ceramics as these materials are different from each other. One major concern is the design of structures to take loads. Metals as well as the other materials are assumed to respond elastically and to recover completely their original shape after the load is removed. Based on this simple fact, extensive litera ture on applied mechanics of materials has been developed to enable designers to predict accurately the performance of structures under load. Many engineers depend on such texts as Timoshenko's Strength of Materials as a guide to the performance of structures. Using this as a guide, generations of engineers have designed economical and safe structural parts. Unfortunately, these design principles must be modified when designing with plastics since they do not respond elastically to stress and undergo permanent deformation with sus tained loading.

Download or read book Introduction to Plastics Engineering written by Anshuman Shrivastava and published by William Andrew. This book was released on 2018-05-15 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Plastics Engineering provides a single reference covering the basics of polymer and plastics materials, and their properties, design, processing and applications in a practical way. The book discusses materials engineering through properties formulation, combining part design and processing to produce final products. This book will be a beneficial guide to materials engineers developing new formulations, processing engineers producing those formulations, and design and product engineers seeking to understand the materials and methods for developing new applications. The book incorporates material properties, engineering, processing, design, applications and sustainable and bio based solutions. Ideal for those just entering the industry, or transitioning between sectors, this is a quick, relevant and informative reference guide to plastics engineering and processing for engineers and plastics practitioners. - Provides a single unified reference covering plastics materials, properties, design, processing and applications - Offers end-to-end coverage of the industry, from formulation to part design, processing, and the final product - Serves as an ideal introductory book for new plastics engineers and students of plastics engineering - Provides a convenient reference for more experienced practitioners

Download or read book Plastics Engineered Product Design written by D.V. Rosato and published by Elsevier. This book was released on 2003-12-16 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: • A comprehensive book which collates the experience of two well-known US plastic engineers.• Enables engineers to make informed decisions.• Includes a unique chronology of the world of plastics.The use of plastics is increasing year on year, and new uses are being found for plastics in many industries. Designers using plastics need to understand the nature and properties of the materials which they are using so that the products perform to set standards.This book, written by two very experienced plastics engineers, provides copious information on the materials, fabrication processes, design considerations and plastics performance, thus allowing informed decisions to be made by engineers.It also includes a useful chronology of the world of plastics, a resource not found elsewhere.

Download or read book Plastics written by Harold Belofsky and published by Hanser Gardner Publications. This book was released on 1995 with total page 631 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook integrates product design with a study of mechanical and physical properties, processing machinery and tooling, and materials and process selection. For undergraduate mechanical engineering courses, it includes examples and problems.

Download or read book Plastics Engineering written by R.J. Crawford and published by Elsevier. This book was released on 2013-10-22 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first textbook to cover both properties and processing of reinforced and unreinforced plastics to this level. It assumes no prior knowledge of plastics and emphasizes the practical aspects of the subject. In this second edition over half the book has been rewritten and the remainder has been updated and reorganized. Early chapters give an introduction to the types of plastics which are currently available and describe how a designer goes about selection of a plastic for a particular application. Later chapters lead the reader into more advanced aspects of mechanical design and analysis of polymer melt flow. All techniques developed are illustrated by numerous worked examples, and several problems are given at the end of each chapter - the solutions to which form an Appendix.

Download or read book Plastics Engineering written by R. J Crawford and published by Butterworth-Heinemann. This book was released on 2020-01-24 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics Engineering, Fourth Edition, presents basic essentials on the properties and processing behaviour of plastics and composites. The book gives engineers and technologists a sound understanding of basic principles without the introduction of unduly complex levels of mathematics or chemistry. Early chapters discuss the types of plastics currently available and describe how designers select a plastic for a particular application. Later chapters guide the reader through the mechanical behaviour of materials, along with a detailed analysis of their major processing techniques and principles. All techniques are illustrated with numerous worked examples within each chapter, with further problems provided at the end.This updated edition has been thoroughly revised to reflect major changes in plastic materials and their processing techniques that have occurred since the previous edition. The plastics and processing techniques addressed within the book have been comprehensively updated to reflect current materials and technologies, with new worked examples and problems also included.

Download or read book Designing Successful Products with Plastics written by Mark T. MacLean-Blevins and published by William Andrew. This book was released on 2017-08-28 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designing Successful Products with Plastics: Fundamentals of Plastic Part Design provides expert insight into design considerations required to bring a concept product or part through design and ready-for-production. The book shows how integrating four key choices—materials, processes, tooling and design—in every design decision allows the designer to fully vet and optimize the design. Rather than focusing on design rules and engineering equations used during product development, the emphasis of the book is on what the designer needs to consider during the early conceptual visualization stages, and in the detailed stages of the design process. This approach will bridge the gap between the industrial designer, tasked with the 'big picture' product design and use, and the part designer, tasked with the detailed plastic part design for manufacture. Useful to both experienced and novice designers, this book brings valuable design process information through specific examples, enabling designers and engineers in the plastics industry to effectively use the available technical information to successfully design and manufacture new products. - Bridges the gap between the industrial designer working on product design and use, and the part designer working on detailed part design for manufacture - Enables designers to establish a solid foundation for new product development on the 'four pillars' of the process: materials, processes, tooling, and design - Provides a hierarchy and roadmap through creative product design and implementation, so engineers can translate a product from creative concept through to realization and commercialization

Download or read book Design Formulas for Plastics Engineers written by Natti S. Rao and published by Carl Hanser Verlag GmbH Co KG. This book was released on 2014-07-03 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although designing machines and dies for plastics processing is routinely done with the help of computer modeling and design programs, the results don't always hold up in industrial application. Therefore, it is essential for the designer to have an understanding of the underlying mathematical concepts and their limitations when working with these programs and/or trying to improve their output. This book presents a summary of the most important formulas and their applications to solve design and processing problems with plastics materials. Numerous practical examples guide the reader step-by-step through the computational routine of designing polymer machinery. The approach is unassuming and very practical to enable every engineer to apply these concepts in their daily work and improve their equipment and stabilize their processes. Contents: - Formulas of Rheology - Thermodynamic Properties - Formulas of Heat Transfer - Designing Plastics Parts - Designing Extrusion Equipment - Designing Injection Molding Equipment

Download or read book Design Data for Reinforced Plastics written by R.M. Mayer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, the authors have assembled a systematic set of design parameters describing short and long term mechanical, thermal, electrical, fire and environmental performance, etc. for composites based primarily on continuous glass, aramid and carbon fibres in thermosetting and thermoplastic matrices.

Download or read book Applied Plastics Engineering Handbook written by Myer Kutz and published by William Andrew. This book was released on 2016-09-15 with total page 786 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applied Plastics Engineering Handbook: Processing, Materials, and Applications, Second Edition, covers both the polymer basics that are helpful to bring readers quickly up-to-speed if they are not familiar with a particular area of plastics processing and the recent developments that enable practitioners to discover which options best fit their requirements. New chapters added specifically cover polyamides, polyimides, and polyesters. Hot topics such as 3-D printing and smart plastics are also included, giving plastics engineers the information they need to take these embryonic technologies and deploy them in their own work. With the increasing demands for lightness and fuel economy in the automotive industry (not least due to CAFÉ standards), plastics will soon be used even further in vehicles. A new chapter has been added to cover the technology trends in this area, and the book has been substantially updated to reflect advancements in technology, regulations, and the commercialization of plastics in various areas. Recycling of plastics has been thoroughly revised to reflect ongoing developments in sustainability of plastics. Extrusion processing is constantly progressing, as have the elastomeric materials, fillers, and additives which are available. Throughout the book, the focus is on the engineering aspects of producing and using plastics. The properties of plastics are explained, along with techniques for testing, measuring, enhancing, and analyzing them. Practical introductions to both core topics and new developments make this work equally valuable for newly qualified plastics engineers seeking the practical rules-of-thumb they don't teach you in school and experienced practitioners evaluating new technologies or getting up-to-speed in a new field. - Presents an authoritative source of practical advice for engineers, providing guidance from experts that will lead to cost savings and process improvements - Ideal introduction for both new engineers and experienced practitioners entering a new field or evaluating a new technology - Updated to include the latest technology, including 3D Printing, smart polymers, and thorough coverage of biopolymers and biodegradable plastics

Download or read book Introduction to Plastics Engineering written by Vijay K. Stokes and published by John Wiley & Sons. This book was released on 2020-04-02 with total page 1749 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authoritative introduction to all aspects of plastics engineering — offering both academic and industry perspectives in one complete volume. Introduction to Plastics Engineering provides a self-contained introduction to plastics engineering. A unique synergistic approach explores all aspects of material use — concepts, mechanics, materials, part design, part fabrication, and assembly — required for converting plastic materials, mainly in the form of small pellets, into useful products. Thermoplastics, thermosets, elastomers, and advanced composites, the four disparate application areas of polymers normally treated as separate subjects, are covered together. Divided into five parts — Concepts, Mechanics, Materials, Part Processing and Assembly, and Material Systems — this inclusive volume enables readers to gain a well-rounded, foundational knowledge of plastics engineering. Chapters cover topics including the structure of polymers, how concepts from polymer physics explain the macro behavior of plastics, evolving concepts for plastics use, simple mechanics principles and their role in plastics engineering, models for the behavior of solids and fluids, and the mechanisms underlying the stiffening of plastics by embedded fibers. Drawing from his over fifty years in both academia and industry, Author Vijay Stokes uses the synergy between fundamentals and applications to provide a more meaningful introduction to plastics. Examines every facet of plastics engineering from materials and fabrication methods to advanced composites Provides accurate, up-to-date information for students and engineers both new to plastics and highly experienced with them Offers a practical guide to large number of materials and their applications Addresses current issues for mechanical design, part performance, and part fabrication Introduction to Plastics Engineering is an ideal text for practicing engineers, researchers, and students in mechanical and plastics engineering and related industries.

Download or read book Engineering Plastics Handbook written by James Margolis and published by McGraw Hill Professional. This book was released on 2005-11-16 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tougher and cheaper than other materials, thermoplastic resins are used in applications ranging from aircraft frames to glass windows. This is the first authoritative source for building and evaluating new product lines. Written by a top team of international experts, this reference incorporates the chemical, mechanical, and physical data necessary to compare and evaluate existing product lines with new and emerging products.

Download or read book Permanent Change written by Michael Bell and published by Princeton Architectural Press. This book was released on 2014-04-15 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: Almost every industry in the world has benefited from the invention of plastics, but it is only in the recent past that they have begun to be appreciated as architectural materials in their own right. Plastics are quickly becoming one of the most ubiquitous materials in construction and have the potential to reshape the roles of architects and engineers, as well as the construction industry at large. As a building material, plastic allows for easily molded and formed shapes, leading to increasingly malleable design processes. Despite being the most deeply engineered building materials today, plastics are still in the nascent stages of understanding in terms of their potential applications and uses. In Permanent Change an interdisciplinary group of architects, historians, theorists, and engineers collectively explore the past, present, and future possibilities of this innovative building material.

Download or read book Life Cycle Engineering of Plastics written by L. Lundquist and published by Elsevier. This book was released on 2001-01-23 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book adds much to the already evolving field of Design for Environment; but it goes far beyond most works on this subject by surrounding the central notions of life cycle assessment with a scientific body of knowledge and with a more practical slant reflecting the reality of the organizations in which product development occurs. Through a focus on plastic products, the authors show the importance of making ties between basic technical knowledge and the process of life cycle engineering. Their approach offers a practical, deliberate way to make ecologically and economically sensible decisions about product reuse and recycling and other critical dimensions of product life behavior. They demonstrate a positive approach to designing products that fits into a sustainable economy through down-to-earth cases. While the book focuses on the life cycle engineering of plastics, it is only a short step to other materials and products. Beyond contributing to the technology of life cycle engineering, this text adds to the growing body of knowledge that argues for an fundamentally new way of thinking about economic and social activity--a new paradigm for sustainable social and industrial problem solving. Industrial ecology is such a new system for thinking about and implementing sustainability that draws its core set of ideas from the ecological world. Industrial ecology brings to the surface the idea of interdependence among members of a community-- natural or economic, and notes the material cycles that are central to a stable ecosystem. The life cycle engineering framework, coupled with sound scientific knowledge of materials behavior as articulated in this book, makes a giant step towards bringing the model of industrial ecology into everyday practice." From the Preface by John R. Ehrenfeld Director, MIT Technology, Business and Environment Program Center for Technology, Policy, and Industrial Development

Download or read book Introduction to Bioplastics Engineering written by Syed Ali Ashter and published by William Andrew. This book was released on 2016-03-29 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Bioplastics Engineering is a practical, user-friendly reference for plastics engineers working with biopolymers and biodegradable plastics that addresses topics that are required for the successful development of cohesive bioplastic products. While there has been considerable demand for the use of bioplastics in industry, processing these bioplastics is a big challenge. The book provides plastics engineers and researchers with a fundamental, practical understanding of the differences between bioplastics and biodegradable polymers, along with guidance on the different methods used to process bioplastics. The book also covers additives and modifiers for biopolymers and their effect on properties. Examples include commercial applications of bioplastics, current bioplastics being developed, and future trends in the industry. This enables engineers, researchers, technicians, and students to understand the decisive relationship between different processing techniques, morphology, mechanical properties, and the further applications of bio-based polymers. The book presents a true engineering approach for the industry on the processing of biopolymers and biodegradable plastics – discussing the ease of use of the polymer, mechanical and thermal properties, rate of biodegradation in particular environments, and pros and cons of particular bioplastics. - Enables engineers, researchers, technicians, and students to understand the decisive relationship between different processing techniques, morphology, mechanical properties, and the further applications of bio-based polymers. - Covers additives and modifiers for biopolymers and their effect on properties - Includes examples that illustrate the commercial applications of bioplastics, current bioplastics being developed, and future trends in the industry

Download or read book Plastics Institute of America Plastics Engineering Manufacturing Data Handbook written by D.V. Rosato and published by Springer Science & Business Media. This book was released on 2001-11-30 with total page 864 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a simplified, practical, and innovative approach to understanding the design and manufacture of plastic products in the World of Plastics. The concise and comprehensive information defines and focuses on past, current, and future technical trends. The handbook reviews over 20,000 different subjects; and contains over 1,000 figures and more than 400 tables. Various plastic materials and their behavior patterns are reviewed. Examples are provided of different plastic products and relating to them critical factors that range from meeting performance requirements in different environments to reducing costs and targeting for zero defects. This book provides the reader with useful pertinent information readily available as summarized in the Table of Contents, List of References and the Index.

Download or read book Transparent Plastics written by Simone Jeska and published by Springer Science & Business Media. This book was released on 2007-10-05 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt: A fascinating guide to building with transparent plastics. Prominent international avant-garde architects such as Shigeru Ban and Herzog & de Meuron frequently use transparent plastic for their structures. Transparent plastic seems ephemeral and thus captures the spirit of the times.