Download or read book Plastic value chains Case WEEE Waste Electrical and Electronic Equipment written by John Baxter and published by Nordic Council of Ministers. This book was released on 2015-03-02 with total page 83 pages. Available in PDF, EPUB and Kindle. Book excerpt: This project identifies improvements in plastics recycling from Nordic electronic waste. Limited improvement is possible through modest changes in the existing value chain, such as ensuring that wastes are directed as intended. But for the most part, enhanced plastics recycling implies higher costs. The necessary changes could be driven in part through revised policy and regulatory instruments. These changes might, in turn, encourage more positive engagement from electronics producers. The report is part of the Nordic Prime Ministers' overall green growth initiative: “The Nordic Region – leading in green growth”. Read more in the web magazine “Green Growth the Nordic Way” at www.nordicway.org or at www.norden.org/greengrowth

Download or read book Plastic value chains written by John Baxter and published by Nordic Council of Ministers. This book was released on 2014-06-10 with total page 87 pages. Available in PDF, EPUB and Kindle. Book excerpt: This project identifies thousands of tonnes per annum of potential enhanced plastics recycling from Nordic electronic waste. Plastics recycling does not always feature prominently in waste treatment. Recycling is technologically viable although the market and economic landscape is challenging. Easy export markets for waste plastic are largely closed and near-source treatment is increasingly needed. Concerns include issues of quality and worries about hazardous materials. Positively engaging electronics producers - beyond the bare punitive requirements within extended responsibility schemes – is a crucial driver for further developments. The report is part of the Nordic Prime Ministers’ overall green growth initiative: “The Nordic Region – leading in green growth”. Read more in the web magazine “Green Growth the Nordic Way” at www.nordicway. org or at www.norden.org/greengrowth The report for Part 2 will be published in December 2014.

Download or read book Plastic Value Chains written by and published by . This book was released on 2014 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt: This project identifies thousands of tonnes per annum of potential enhanced plastics recycling from Nordic electronic waste. Plastics recycling does not always feature prominently in waste treatment. Recycling is technologically viable although the market and economic landscape is challenging. Easy export markets for waste plastic are largely closed and near-source treatment is increasingly needed. Concerns include issues of quality and worries about hazardous materials. Positively engaging electronics producers - beyond the bare punitive requirements within extended responsibility schemes - is a crucial driver for further developments. The report is part of the Nordic Prime Ministers' overall green growth initiative: "The Nordic Region - leading in green growth". Read more in the web magazine "Green Growth the Nordic Way" at www.nordicway. org or at www.norden.org/greengrowthThe report for Part 2 will be published in December 2014.

Download or read book Plastic Value Chains Case WEEE Waste Electrical and Electronic Equipment Part 2 Report written by and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Designing plastics circulation written by Anne Raudaskoski and published by Nordic Council of Ministers. This book was released on 2019-08-05 with total page 41 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presently most electrical/electronic equipment (EEE) is not designed for recycling, let alone for circulation. Plastics in these products account for 20% of material use, and through better design, significant environmental and financial savings could be gained. Technological solutions and circular design opportunities already exist, but they haven’t been implemented yet. Some challenges, such as ease of disassembly, could be resolved through better communication and by sharing learnings across the value chain.Instead of WEEE, we should focus on developing CEEE: Circular Electrical and Electronic Equipment.The case examples of this report show how different stages of the lifecycle can be designed so that plastics circulation becomes possible and makes business sense. It is time to take a leap in material flow management and scale up these circular solutions across the industry.

Download or read book Plastic Waste Markets written by David McKinnon and published by Nordic Council of Ministers. This book was released on 2018-05-29 with total page 85 pages. Available in PDF, EPUB and Kindle. Book excerpt: This project examines the market for recycled plastic, with a primary focus on post-consumer plastic waste because this is considered to be the more problematic. The market for plastic waste generated in manufacturing and production is relatively strong and well-functioning; As a consequence, the majority of plastic waste from manufacturing and production is recycled. Post-consumer waste is much less homogenous: it comes from a wide variety of sources, and contains a wide variety of plastics and tends to be difficult to collect, sort, and recycle. This project identifies barriers to further utilisation of recycled plastics, and analyses a collection of policy tools that could be used to support and expand that market.

Download or read book Circular plastics in electrical and electronic equipment written by Bauer, Bjørn and published by Nordic Council of Ministers. This book was released on 2022-01-03 with total page 95 pages. Available in PDF, EPUB and Kindle. Book excerpt: Available online: https://pub.norden.org/temanord2021-553/ This report explores what the Nordic countries can do to promote the use of recyclable plastic components in electrical and electronic products, with particular focus on minimising their hazardous chemical component. The report provides an overview of the hazardous additives currently used in the plastic components of EEE, drawing on information available from legislation and supporting studies, research and academia, NGOs and market actors. The results presented here build upon input collected though a literature study, a policy analysis of EU and Nordic legislation and initiatives, interviews with experts across the value chain and an expert workshop. Together these inputs were used to assess and qualify possible future actions in the Nordic countries to minimise hazardous chemicals in plastic components of EEE.

Download or read book E Waste in Transition written by Florin-Constantin Mihai and published by BoD – Books on Demand. This book was released on 2016-06-29 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: E-waste management is a serious challenge across developed, transition, and developing countries because of the consumer society and the globalization process. E-waste is a fast-growing waste stream which needs more attention of international organizations, governments, and local authorities in order to improve the current waste management practices. The book reveals the pollution side of this waste stream with critical implications on the environment and public health, and also it points out the resource side which must be further developed under the circular economy framework with respect to safety regulations. In this context, complicated patterns at the global scale emerge under legal and illegal e-waste trades. The linkages between developed and developing countries and key issues of e-waste management sector are further examined in the book.

Download or read book Policy Brief Recycling in the Circular Economy written by Birgit Elin Munck-Kampmann and published by Nordic Council of Ministers. This book was released on 2018-12-10 with total page 62 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Waste Electrical and Electronic Equipment WEEE Handbook written by Vannessa Goodship and published by Elsevier. This book was released on 2012-08-30 with total page 753 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrical and electronic waste is a growing problem as volumes are increasing fast. Rapid product innovation and replacement, especially in information and communication technologies (ICT), combined with the migration from analog to digital technologies and to flat-screen televisions and monitors has resulted in some electronic products quickly reaching the end of their life. The EU directive on waste electrical and electronic equipment (WEEE) aims to minimise WEEE by putting organizational and financial responsibility on producers and distributors for collection, treatment, recycling and recovery of WEEE. Therefore all stakeholders need to be well-informed about their WEEE responsibilities and options. While focussing on the EU, this book draws lessons for policy and practice from all over the world.Part one introduces the reader to legislation and initiatives to manage WEEE. Part two discusses technologies for the refurbishment, treatment and recycling of waste electronics. Part three focuses on electronic products that present particular challenges for recyclers. Part four explores sustainable design of electronics and supply chains. Part five discusses national and regional WEEE management schemes and part six looks at corporate WEEE management strategies.With an authoritative collection of chapters from an international team of authors, Waste electrical and electronic equipment (WEEE) handbook is designed to be used as a reference by policy-makers, producers and treatment operators in both the developed and developing world. Draws lessons for waste electrical and electronic equipment (WEEE) policy and practice from around the world Discusses legislation and initiatives to manage WEEE, including global e-waste initiatives, EU legislation relating to electronic waste, and eco-efficiency evaluation of WEEE take-back systems Sections cover technologies for refurbishment, treatment and recycling of waste, sustainable design of electronics and supply chains, national and regional waste management schemes, and corporate WEEE management strategies

Download or read book Hazardous substances in plastics written by Stenmarck, Åsa and published by Nordic Council of Ministers. This book was released on 2017-02-08 with total page 121 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of the project is to create knowledge on how plastics recycling can increase without increasing the risk of emitting hazardous substances to the environment.The first general conclusion is that to be able to increase recycling there are measures needed at different levels. The following areas are of interest: • Legislation: new legislation is not necessary, but harmonisation and clear guidance to the existing one is. • Market: to create a market safety on content is needed. • If substances added are less hazardous the recycled raw material would be “more safe” to use. • There should be higher attention put on the knowledge of the recyclers. • Traceability and content: Further work on labelling reaching the recycle part of the value chain needs to be developed. It is also needed to develop a systematic approach towards risk assessments linked to recycling.

Download or read book Conversion of Electronic Waste in to Sustainable Products written by Mohammad Jawaid and published by Springer Nature. This book was released on 2022-10-25 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives an overview of electronic waste (e-waste) management and the latest technological aspects of recycling and disposal of obsolete electronic components while minimizing the environmental impact of toxic chemicals and heavy metals from e-waste. As electronics become more accessible worldwide, this effect generates up to 50 tonnes of e-waste that is only set to increase every year. The chapters in this book explore different strategies through recycling practices, green computing, and eco-friendly approach in handling e-waste through government policies to mitigate the growing side effects of e-waste. This book caters to researchers, policymakers, and industrial practitioners who are interested in more sustainable practices in e-waste management.

Download or read book Towards Circular Economy Closing the Loop with Chemical Recycling of Solid Plastic Waste written by and published by Academic Press. This book was released on 2022-11-23 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Chemical Engineering serial, Volume 60 highlights new advances in the field with this new volume presenting interesting chapters. Each chapter is written by an international board of authors. Provides the authority and expertise of leading contributors from an international board of authors Presents the latest release in the Advances in Chemical Engineering series Includes the latest information on the Circular Economy: Closing the Loop with Chemical Recycling of Solid Plastic Waste

Download or read book Electronic Waste Management written by G H Eduljee and published by Royal Society of Chemistry. This book was released on 2019-09-06 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electronic waste, which includes everything from refrigerators to smartphones, is one of the world’s fastest growing waste streams. Often these items are simply discarded as new technology becomes available. A huge amount of electronic waste is generated globally and currently only around 20% of it is recycled. The complex mixture of materials and components within electronic waste makes it difficult to manage and many of these components can pose hazards to human health or the environment if not disposed of carefully. There have been significant changes in the global approach to electronic waste management and the legislation around it since the publication of the first edition of Electronic Waste Management. This new edition provides an updated overview across the world as well as presenting new chapters on current issues in recycling and management of this waste. This is an essential reference not only for those working in recycling and waste management, but also for those working in manufacturing and product development who wish to consider the full lifecycle of their products. It also provides valuable insights for policymakers developing more environmentally sound and sustainable systems and strategies for the management of electronic waste.

Download or read book Metal Sustainability written by Reed M. Izatt and published by John Wiley & Sons. This book was released on 2016-07-29 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: The sustainable use of natural resources is an important global challenge, and improved metal sustainability is a crucial goal for the 21st century in order to conserve the supply of critical metals and mitigate the environmental and health issues resulting from unrecovered metals. Metal Sustainability: Global Challenges, Consequences and Prospects discusses important topics and challenges associated with sustainability in metal life cycles, from mining ore to beneficiation processes, to product manufacture, to recovery from end-of-life materials, to environmental and health concerns resulting from generated waste. The broad perspective presented highlights the global interdependence of the many stages of metal life cycles. Economic issues are emphasized and relevant environmental, health, political, industrial and societal issues are discussed. The importance of applying green chemistry principles to metal sustainability is emphasized. Topics covered include: • Recycling and sustainable utilization of precious and specialty metals • Formal and informal recycling from electronic and other high-tech wastes • Global management of electronic wastes • Metal reuse and recycling in developing countries • Effects of toxic and other metal releases on the environment and human health • Effect on bacteria of toxic metal release • Selective recovery of platinum group metals and rare earth metals • Metal sustainability from a manufacturing perspective • Economic perspectives on sustainability, mineral development, and metal life cycles • Closing the Loop – Minerals Industry Issues The aim of this book is to improve awareness of the increasingly important role metals play in our high-tech society, the need to conserve our metal supply throughout the metal life cycle, the importance of improved metal recycling, and the effects that unhindered metal loss can have on the environment and on human health.

Download or read book Design for Innovative Value Towards a Sustainable Society written by Mitsutaka Matsumoto and published by Springer Science & Business Media. This book was released on 2012-04-03 with total page 1152 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the first EcoDesign International Symposium held in 1999, this symposium has led the research and practices of environmentally conscious design of products, services, manufacturing systems, supply chain, consumption, as well as economics and society. EcoDesign 2011 - the 7th International Symposium on Environmentally Conscious Design and Inverse Manufacturing - was successfully held in the Japanese old capital city of Kyoto, on November 30th – December 2nd, 2011. The subtitle of EcoDesign 2011 is to “design for value innovation towards sustainable society.” During this event, presenters discussed the way to achieve both drastic environmental consciousness and value innovation in order to realise a sustainable society.

Download or read book Plastic Waste Management written by Kalim Deshmukh and published by John Wiley & Sons. This book was released on 2024-03-11 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastic Waste Management Comprehensive resource on innovative and breakthrough developments in plastic waste management, covering a wide range of processing techniques and applications Plastic Waste Management offers a complete guide to the best plastic waste management practices through recycling, incineration, landfill, and other processes, discusses applications of plastic waste management including energy generation, biochemical production, construction, and food packaging, covering current challenges relating to plastic waste, explaining the sources of waste and their routes into the environment, and providing systematic coverage of plastic waste treatment methods, including mechanical processing, monomerization, blast furnace feedstock, gasification, and thermal recycling. The book also discusses different biodegradation mechanisms of plastic wastes and ecotoxicity and ecological Implications of marine plastic debris. From a cultural perspective, the book provides information regarding environmental and health implications, societal issues, and current challenges associated with plastic waste management. Written by leading experts in the field and edited by two highly qualified academics, Plastic Waste Management covers specific sample topics such as: A a roadmap towards a circular economy and environmental sustainability via effective management strategies for plastic wastes Implementation of an analytical hierarchy process for developing better waste collection systems, and chemical recycling of plastic waste for sustainable development Mechanisms, perspectives, and challenges for natural biodegradation of plastic wastes, and conversion of plastic wastes into value added materials Plastic wastes management and disposal in developing countries, and challenges and strategies for plastic waste management during and post COVID-19 pandemic Plastic Waste Management is a highly valuable resource for scientists and researchers working in the fields of environmental science, environmental engineering, and plastic engineering towards the goal of developing sustainable materials, along with graduate and postgraduate students in related programs of study, and professionals and engineers in related industries.