Download or read book Testing of the Plastic Deformation of Metals written by T. W. Clyne and published by Cambridge University Press. This book was released on 2021-06-10 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover a novel approach to the subject, providing detailed information about established and innovative mechanical testing procedures.

Download or read book Plastic Deformation of Materials written by R. J. Arsenault and published by Elsevier. This book was released on 2013-10-22 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: Treatise on Materials Science and Technology, Volume 6: Plastic Deformation of Materials covers the fundamental properties and characterization of materials, ranging from simple solids to complex heterophase systems. The book presents articles on the low temperature of deformation of bcc metals and their solid-solution alloys; the cyclic deformation of metals and alloys; and the high-temperature diffusion-controlled creep of some metals and alloys, with particular reference to the various creep mechanisms. The text also includes articles on superplasticity; the fatigue deformation of polymers; the low temperature deformation of crystalline nonmetals; and the recovery and recrystallization during high temperature deformation. Professional scientists and engineers, as well as graduate students in materials science and associated fields will find the book invaluable.

Download or read book Fatigue and Durability of Structural Materials written by Gary R. Halford and published by ASM International. This book was released on 2006 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue and Durability of Structural Materials explains how mechanical material behavior relates to the design of structural machine components. The major emphasis is on fatigue and failure behavior using engineering models that have been developed to predict, in advance of service, acceptable fatigue and other durability-related lifetimes. The book covers broad classes of materials used for high-performance structural applications such as aerospace components, automobiles, and power generation systems. Coverage focuses on metallic materials but also addresses unique capabilities of important nonmetals. The concepts are applied to behavior at room or ambient temperatures; a planned second volume will address behavior at higher-temperatures. The volume is a repository of the most significant contributions by the authors to the art and science of material and structural durability over the past half century. During their careers, including 40 years of direct collaboration, they have developed a host of durability models that are based on sound physical and engineering principles. Yet, the models and interpretation of behavior have a unique simplicity that is appreciated by the practicing engineer as well as the beginning student. In addition to their own pioneering work, the authors also present the work of numerous others who have provided useful results that have moved progress in these fields. This book will be of immense value to practicing mechanical and materials engineers and designers charged with producing structural components with adequate durability. The coverage is appropriate for a range of technical levels from undergraduate engineering students through material behavior researchers and model developers. It will be of interest to personnel in the automotive and off-highway vehicle manufacturing industry, the aeronautical industry, space propulsion and the power generation/conversion industry, the electric power industry, the machine tool industry, and any industry associated with the design and manufacturing of mechanical equipment subject to cyclic loads.

Download or read book Plasticity and Creep of Metals written by Andrew Rusinko and published by Springer Science & Business Media. This book was released on 2011-07-24 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book serves both as a textbook and a scientific work. As a textbook, the work gives a clear, thorough and systematic presentation of the fundamental postulates, theorems and principles and their applications of the classical mathematical theories of plasticity and creep. In addition to the mathematical theories, the physical theory of plasticity, the book presents the Budiansky concept of slip and its modification by M. Leonov. Special attention is given to the analysis of the advantages and shortcomings of the classical theories. In its main part, the book presents the synthetic theory of irreversible deformations, which is based on the mathematical Sanders flow plasticity theory and the physical theory, the Budiansky concept of slip. The main peculiarity of the synthetic theory is that the formulae for both plastic and creep deformation, as well their interrelations, can be derived from the single constitutive equation. Furthermore, the synthetic theory, as physical one, can take into account the real processes that take place in solids at irreversible deformation. This widens considerably the potential of the synthetic theory. In the framework of the synthetic theory such problems as creep delay, the Hazen-Kelly effect, the deformation at the break of the load trajectory, the influence of the rate of loading on the stress-strain diagram, creep at the changes of load, creep at unloading and reversed creep, have been analytically described. In the last chapter, the book shows the solution of some contemporary problems of plasticity and creep: Creep deformation at cyclic abrupt changes of temperature, The influence of irradiation on the plastic and creep deformation, Peculiarities of deformation at the phase transformation of some metals.

Download or read book Investigations and Applications of Severe Plastic Deformation written by Terry C. Lowe and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Material processing techniques that employ severe plastic deformation have evolved over the past decade, producing metals, alloys and composites having extraordinary properties. Variants of SPD methods are now capable of creating monolithic materials with submicron and nanocrystalline grain sizes. The resulting novel properties of these materials has led to a growing scientific and commercial interest in them. They offer the promise of bulk nanocrystalline materials for structural; applications, including nanocomposites of lightweight alloys with unprecedented strength. These materials may also enable the use of alternative metal shaping processes, such as high strain rate superplastic forming. Prospective applications for medical, automotive, aerospace and other industries are already under development.

Download or read book Plasticity and failure behavior of solids written by George C. Sih and published by Springer Science & Business Media. This book was released on 1990-06-30 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: More than six years ago, several of Rabotnov's close friends and colleagues from the USSR and USA decided to contribute a volume on Plasticity and Failure of Solids in honor of his 70th birthday. The celebration was interrupted unexpectedly by his death on May 13, 1985 at which time another decision was made still to publish the work, but as a memorial volume. As in any field of scientific endeavor, research confronts the scientists with anomalies; our chosen area is no exception. The ways in which failure criteria and plasticity theory are combined can differ widely among the researchers; they will never yield quite the same results. Each of the invited contributors has, therefore, been encouraged to express his views and to expound on his personal opinion. The contributors are free of enumeration from the authority and/or consensus of any scientific society or community. What impedes scientific process is the esoteric tradition of accepting ideas and theories by consensus among members of societies and communities. The absence of such a trend is refreshing; the collaboration between the authors from the USSR and the USA had to be one of the contributing factors. Finally, the editors wish to acknowledge the authors who have made the publication of this volume possible. a. c. Sib S. T. Mileiko AJ. Ishlinsky xi The late Professor Yuriy Nickolaevich Rabotnov (February 24, 1914 - May 13, 1985) xii Scientific biography of the late academician Yu. N.

Download or read book Crystal Plasticity Finite Element Methods written by Franz Roters and published by John Wiley & Sons. This book was released on 2011-08-04 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by the leading experts in computational materials science, this handy reference concisely reviews the most important aspects of plasticity modeling: constitutive laws, phase transformations, texture methods, continuum approaches and damage mechanisms. As a result, it provides the knowledge needed to avoid failures in critical systems udner mechanical load. With its various application examples to micro- and macrostructure mechanics, this is an invaluable resource for mechanical engineers as well as for researchers wanting to improve on this method and extend its outreach.

Download or read book Material Instabilities in Elastic and Plastic Solids written by Henryk Petryk and published by Springer. This book was released on 2014-05-04 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book collects recent theoretical developments in the area of material instability in elastic and plastic solids along with related analytical and numerical methods and applications. The existing different approaches to instability phenomena in metal single crystals, polycristals and in geomaterials are presented with the emphasis laid on mutual relations and on unifying concepts, including elliptictly loss and the energy criterion. Quasi-static bifurcation, initiation of single or multiple shear bands and post-critical strain localization are examined along with dynamic phenomena as wave propagation, moving shocks, internal snap-through and instability of flutter type. This gives an overview of a variety of material instability problems, methods and applications.

Download or read book Plasticity Theory written by Jacob Lubliner and published by Courier Corporation. This book was released on 2013-04-22 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of Plasticity Theory is to provide a comprehensive introduction to the contemporary state of knowledge in basic plasticity theory and to its applications. It treats several areas not commonly found between the covers of a single book: the physics of plasticity, constitutive theory, dynamic plasticity, large-deformation plasticity, and numerical methods, in addition to a representative survey of problems treated by classical methods, such as elastic-plastic problems, plane plastic flow, and limit analysis; the problem discussed come from areas of interest to mechanical, structural, and geotechnical engineers, metallurgists and others. The necessary mathematics and basic mechanics and thermodynamics are covered in an introductory chapter, making the book a self-contained text suitable for advanced undergraduates and graduate students, as well as a reference for practitioners of solid mechanics.

Download or read book Finite Plastic Deformation of Crystalline Solids written by K. S. Havner and published by Cambridge University Press. This book was released on 1992-03-27 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher Description

Download or read book Cyclic Plasticity of Metals written by Hamid Jahed and published by Elsevier. This book was released on 2021-11-11 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cyclic Plasticity of Metals: Modeling Fundamentals and Applications provides an exhaustive overview of the fundamentals and applications of various cyclic plasticity models including forming and spring back, notch analysis, fatigue life prediction, and more. Covering metals with an array of different structures, such as hexagonal close packed (HCP), face centered cubic (FCC), and body centered cubic (BCC), the book starts with an introduction to experimental macroscopic and microscopic observations of cyclic plasticity and then segues into a discussion of the fundamentals of the different cyclic plasticity models, covering topics such as kinematics, stress and strain tensors, elasticity, plastic flow rule, and an array of other concepts. A review of the available models follows, and the book concludes with chapters covering finite element implementation and industrial applications of the various models. - Reviews constitutive cyclic plasticity models for various metals and alloys with different cell structures (cubic, hexagonal, and more), allowing for more accurate evaluation of a component's performance under loading - Provides real-world industrial context by demonstrating applications of cyclic plasticity models in the analysis of engineering components - Overview of latest models allows researchers to extend available models or develop new ones for analysis of an array of metals under more complex loading conditions

Download or read book Mechanical Behavior of Materials written by William F. Hosford and published by Cambridge University Press. This book was released on 2010 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a textbook on the mechanical behavior of materials for mechanical and materials engineering. It emphasizes quantitative problem solving. This new edition includes treatment of the effects of texture on properties and microstructure in Chapter 7, a new chapter (12) on discontinuous and inhomogeneous deformation, and treatment of foams in Chapter 21.

Download or read book Severe Plastic Deformation Techniques written by Marcello Cabibbo and published by BoD – Books on Demand. This book was released on 2017-08-09 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Grain size is recognized as a key microstructural factor affecting mechanical and, to some extent, physical properties of metals and metallic materials. For this reason, all the means designed to control and modify the grain size are considered a proper way to design and tailor metallic materials with desired properties. In this sense, microstructure refinement through severe plastic deformation (SPD) techniques can be considered a key method for this purpose. A typical SPD process is currently defined as any method of metal forming under extensive hydrostatic pressure intended to impose a very high strain on a bulk solid without involving any significant change in the overall dimensions and having the ability to produce exceptional grain refinement. What makes SPD processing techniques so popular and attractive is the possibility of using them to enhance the strength behavior of conventional metallic materials by a factor of up to eight for pure metals such as copper and by some 30-50% for alloys. Despite the impressive property improvement achievable with SPD techniques, their uptake by industry has been rather sluggish. This book intends to give a panorama of the typical SPD techniques intended to optimize the mechanical and physical properties of metals through a significant grain size reduction process. Modeling for this purpose is also presented.

Download or read book Nanomaterials by Severe Plastic Deformation written by Michael J. Zehetbauer and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings of the "Second International Conference on Nanomaterials by Severe Plastic Deformation" review the enormous scientific avalanche that has been developing in the field over recent years. A valuable resource for any scientist and engineer working in this emerging field of nanotechnology.

Download or read book Elements of Metallurgy and Engineering Alloys written by Flake C. Campbell and published by ASM International. This book was released on 2008-01-01 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical reference provides thorough and systematic coverage on both basic metallurgy and the practical engineering aspects of metallic material selection and application.

Download or read book Mechanical Properties and Working of Metals and Alloys written by Amit Bhaduri and published by Springer. This book was released on 2018-05-12 with total page 758 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended to serve as core text or handy reference on two key areas of metallic materials: (i) mechanical behavior and properties evaluated by mechanical testing; and (ii) different types of metal working or forming operations to produce useful shapes. The book consists of 16 chapters which are divided into two parts. The first part contains nine chapters which describe tension (including elastic stress – strain relation, relevant theory of plasticity, and strengthening methods), compression, hardness, bending, torsion – pure shear, impact loading, creep and stress rupture, fatigue, and fracture. The second part is composed of seven chapters and covers fundamentals of mechanical working, forging, rolling, extrusion, drawing of flat strip, round bar, and tube, deep drawing, and high-energy rate forming. The book comprises an exhaustive description of mechanical properties evaluated by testing of metals and metal working in sufficient depth and with reasonably wide coverage. The book is written in an easy-to-understand manner and includes many solved problems. More than 150 numerical problems and many multiple choice questions as exercise along with their answers have also been provided. The mathematical analyses are well elaborated without skipping any intermediate steps. Slab method of analysis or free-body equilibrium approach is used for the analytical treatment of mechanical working processes. For hot working processes, different frictional conditions (sliding, sticking and mixed sticking–sliding) have been considered to estimate the deformation loads. In addition to the slab method of analysis, this book also contains slip-line field theory, its application to the static system, and the steady state motion, Further, this book includes upper-bound theorem, and upper-bound solutions for indentation, compression, extrusion and strip drawing. The book can be used to teach graduate and undergraduate courses offered to students of mechanical, aerospace, production, manufacturing and metallurgical engineering disciplines. The book can also be used for metallurgists and practicing engineers in industry and development courses in the metallurgy and metallic manufacturing industries.

Download or read book Electron Backscatter Diffraction in Materials Science written by Adam J. Schwartz and published by Springer Science & Business Media. This book was released on 2010-03-11 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electron backscatter diffraction is a very powerful and relatively new materials characterization technique aimed at the determination of crystallographic texture, grain boundary character distributions, lattice strain, phase identification, and much more. The purpose of this book is to provide the fundamental basis for electron backscatter diffraction in materials science, the current state of both hardware and software, and illustrative examples of the applications of electron backscatter diffraction to a wide-range of materials including undeformed and deformed metals and alloys, ceramics, and superconductors. The text has been substantially revised from the first edition, and the authors have kept the format as close as possible to the first edition text. The new developments covered in this book include a more comphrensive coverage of the fundamentals not covered in the first edition or other books in the field, the advances in hardware and software since the first edition was published, and current examples of application of electron backscatter diffraction to solve challenging problems in materials science and condensed-matter physics.