Download or read book Plastic Part Design for Injection Molding written by Robert A. Malloy and published by . This book was released on 2011 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal of the book is to assist the designer in the development of parts that are functional, reliable, manufacturable, and aesthetically pleasing. Since injection molding is the most widely used manufacturing process for the production of plastic parts, a full understanding of the integrated design process presented is essential to achieving economic and functional design goals. Features over 425 drawings and photographs.
Download or read book Plastic Component Design written by Paul D. Q. Campbell and published by Industrial Press Inc.. This book was released on 1996 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is for the industrial designer interested in the applications of plastics in products and industry. It explains how different plastics are processed, and it contains extensive examples of common and unusual plastic components and products with an explanation of how they are manufactured. Every year, more products are being replaced or augmented by the same product made from plastic, and this trend has resulted in much debate about the effectiveness of plastic replacements. Today's plastics can be designed to operate in all weather conditions and chemical surroundings. They can be economically produced for short run part production or readily adapted to high quantity production, and they can be cut, glued, tapped, or machined by traditional methods to suit design needs. Explains how to choose the best processing method, what fastening or joining methods can be used, and how to use the characteristics of a plastic to judge its suitability for an application. Covers all major contemporary molding processes. Discusses, in detail, important topics such as surface finish and special effects.
Download or read book Design and Manufacturing of Plastics Products written by Antonio Pouzada and published by Elsevier. This book was released on 2021-08-17 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and Manufacturing of Plastics Products: Integrating Conventional Methods and Innovative Technologies brings together detailed information on design, materials selection, properties, manufacturing, and the performance of plastic products, incorporating the utilization of the latest novel techniques and additive manufacturing technologies. The book integrates the design of molded products and conventional manufacturing and molding techniques with recent additive manufacturing techniques to produce performant products and cost-effective tools. Key areas of innovation are explained in detail, including hybrid molds, the integration of processing options with product properties and performance, and sustainability factors such as eco-design strategies, recycling, and lifecycle assessment. Other sections cover the development of plastics products, including design methodologies, design solutions specific to plastics, and design for re-use, as well as manufacturing and performance, with an emphasis on thermoplastic molding techniques, recent advances on plastics tooling, and the appraisal of the influence of processing options on product performance. This is a valuable resource to plastics engineers, design engineers, mold makers, and product or part designers across industries. It will also be of interest to researchers and advanced students in plastics engineering, polymer science, additive manufacturing and mechanical engineering. Offers a thorough grounding in plastics part design, thermoplastic material selection, properties, manufacture and performance of plastic parts Presents the latest advances, including the integration of additive manufacturing in the plastics product development cycle, hybrid molds, and lifecycle and recycling considerations Enables the reader to utilize traditional methods alongside cutting-edge technologies in the production of performant plastic products and parts
Download or read book Design and Manufacture of Plastic Components for Multifunctionality written by Vannessa Dr Goodship and published by William Andrew. This book was released on 2015-09-08 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and Manufacture of Plastic Components for Multifunctionality: Structural Composites, Injection Molding, and 3D Printing presents the latest information on how plastics manufacturers are increasingly being driven towards carbon emission reduction, lightweighting, and cost savings through process integration. These technologies have the potential to revolutionize future products with built-in functionality such as sensors, smart packaging, and damage detection technology for everything from milk bottles and salad packaging to automotive bumpers and plane fuselages. This book introduces the three core manufacturing methods for multifunctional materials, composites, injection molding, and 3D printing, all processes facing challenges for the implementation of new technology. Users will find a book that brings together both process and material advances in this area, giving process engineers, designers, and manufacturers the information they need to choose the appropriate material and process for the product they are developing. Provides an introduction to the latest technologies in the area of multifunctionality, enabling engineers to implement new breakthroughs in their own businesses Gives an understanding of the processes that need to be considered in both design and manufacture of future devices, while using materials from a broader palette than used in existing manufacturing processes Includes best practice guidance and flow charts to aid in material and process selection Covers revolutionary future products with built-in functionality such as sensors, smart packaging, and damage detection technology for everything from milk bottles and salad packaging to automotive bumpers and plane fuselages
Download or read book Plastics Engineered Product Design written by D.V. Rosato and published by Elsevier. This book was released on 2003-12-16 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: • A comprehensive book which collates the experience of two well-known US plastic engineers.• Enables engineers to make informed decisions.• Includes a unique chronology of the world of plastics. The use of plastics is increasing year on year, and new uses are being found for plastics in many industries. Designers using plastics need to understand the nature and properties of the materials which they are using so that the products perform to set standards. This book, written by two very experienced plastics engineers, provides copious information on the materials, fabrication processes, design considerations and plastics performance, thus allowing informed decisions to be made by engineers. It also includes a useful chronology of the world of plastics, a resource not found elsewhere.
Download or read book Plastic Product Design written by Ronald D. Beck and published by . This book was released on 1980 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plastic Design of Frames 1 Fundamentals written by J. Baker and published by Cambridge University Press. This book was released on 1969-06-02 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: When this volume was first published, plastic theory was the most modern method of structural analysis, and it made possible the direct design of steel frames in a way not available with only elastic methods. It is now recognized that this theory is also fundamental to structural design in materials such as reinforced concrete and aluminium. This is the first volume of a two-volume work by Professors Baker and Heyman that expounds and illustrates the methods of plastic design. Volume 1 gives the elements of the theory and covers the needs of most undergraduates and designers. A special feature of this work is the large number of exercises (140 in all) with answers. Volume 2 deals with advanced topics of theoretical analysis and practical design. The examples and the methods presented herein are extremely valuable to the engineer. The quality of the writing makes Professors Baker and Heyman's book a pleasure to read. Lord Baker (Sir John Fleetwood Baker, 1901-1985) was Professor of Mechanical Sciences and Head of the Department of Engineering at the University of Cambridge from 1943 to 1968. He was a Fellow of the Royal Society. Baker's pioneering research led to the development of the plastic theory of design, originally used for steel frames but now recognized as being valid for many structural materials, such as aluminium and reinforced concrete. Additionally, Baker was responsible for many curriculum innovations at the university and was the author of The Steel Skeleton, a two-volume work. Jacques Heyman is the former Head of the Department of Engineering at the University of Cambridge and the author of ten books, including The Stone Skeleton, Elements of the Theory of Structures, Structural Analysis: A Historical Approach, Elements of Stress Analysis, and the two-volume set Plastic Design of Frames: Volume 1. Fundamentals with Lord Baker and Volume 2. Applications. He is a Fellow of the Society of Antiquaries, the Institution of Civil Engineers, and the Royal Academy of Engineering. He acted as a consulting engineer for a number of English cathedrals and as a member of the Architectural Advisory Panel for Westminster Abbey and of the Cathedrals Fabric Commission for England, and he has served on many British standards committees. The Stone Skeleton won the Choice Outstanding Academic Books Award in 1996.
Download or read book Plastic Design and Second Order Analysis of Steel Frames written by W.F. Chen and published by Springer. This book was released on 2013-12-20 with total page 519 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastic Design of Steel Frames assesses the current status and future direction of computer-based analyses of inelastic strength and stability for direct frame design. It shows how design rules are used in practical frame design and provides an introduction to the second-order theory of inelastic frame design. The book includes two computer programs on a diskette: one for the first-order analyses and the other for the second-order plastic hinge analysis of planar frame design. The second-order program can be used to predict realistic strengths and stabilities of planar frames, thereby eliminating the tedious task of estimating factors for individual member capacity checks. Both programs include clear input instructions. The diskette also contains the Fortran source-code listing for the second-order plastic-hinge analysis, enabling the user to customize the program. The programs will run on an IBM PC-AT or equivalent machine with 640 kB of memory and 30 MB hard drive.
Download or read book Designing Successful Products with Plastics written by Mark T. MacLean-Blevins and published by William Andrew. This book was released on 2017-08-28 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designing Successful Products with Plastics: Fundamentals of Plastic Part Design provides expert insight into design considerations required to bring a concept product or part through design and ready-for-production. The book shows how integrating four key choices—materials, processes, tooling and design—in every design decision allows the designer to fully vet and optimize the design. Rather than focusing on design rules and engineering equations used during product development, the emphasis of the book is on what the designer needs to consider during the early conceptual visualization stages, and in the detailed stages of the design process. This approach will bridge the gap between the industrial designer, tasked with the ‘big picture’ product design and use, and the part designer, tasked with the detailed plastic part design for manufacture. Useful to both experienced and novice designers, this book brings valuable design process information through specific examples, enabling designers and engineers in the plastics industry to effectively use the available technical information to successfully design and manufacture new products. Bridges the gap between the industrial designer working on product design and use, and the part designer working on detailed part design for manufacture Enables designers to establish a solid foundation for new product development on the ‘four pillars’ of the process: materials, processes, tooling, and design Provides a hierarchy and roadmap through creative product design and implementation, so engineers can translate a product from creative concept through to realization and commercialization
Download or read book 500 Plastic Jewelry Designs written by Marthe Le Van and published by Sterling Publishing Company, Inc.. This book was released on 2009 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: The popular 500 series takes its hippest, most fun approach yet, with an intoxicatingly vibrant and technically diverse collection of contemporary jewelry. Sloan has put together a survey of the best work being done with this thoroughly modern material.
Download or read book Plastic Analysis and Design of Steel Structures written by M. Bill Wong and published by Butterworth-Heinemann. This book was released on 2011-08-30 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: The plastic analysis method has been used extensively by engineers for designing steel structures. Simpler structures can be analyzed using the basic virtual work formulation, but more complex frames are evaluated with specialist computer software. This new book sets out a method for carrying out plastic analysis of complex structures without the need for specialist tools.The book provides an introduction to the use of linear programming techniques for plastic analysis. This powerful and advanced method for plastic analysis is important in an automated computational environment, in particular for non-linear structural analysis.A detailed comparison between the design codes for the United States and Australia and the emerging European Eurocodes enables practising engineers to understand the issues involved in plastic design procedures and the limitations imposed by this design method. Covers latest research in plastic analysis and analytical tools Introduces new successive approximation method for calculating collapse loads Programming guide for using spreadsheet tools for plastic analysis
Download or read book Plastics Design Handbook written by Marlene G. Rosato and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 697 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a simplified and practical approach to designing with plastics that funda mentally relates to the load, temperature, time, and environment subjected to a product. It will provide the basic behaviors in what to consider when designing plastic products to meet performance and cost requirements. Important aspects are presented such as understanding the advantages of different shapes and how they influence designs. Information is concise, comprehensive, and practical. Review includes designing with plastics based on material and process behaviors. As de signing with any materials (plastic, steel, aluminum, wood, etc.) it is important to know their behaviors in order to maximize product performance-to-cost efficiency. Examples of many different designed products are reviewed. They range from toys to medical devices to cars to boats to underwater devices to containers to springs to pipes to buildings to aircraft to space craft. The reader's product to be designed can directly or indirectly be related to product design reviews in the book. Important are behaviors associated and interrelated with plastic materials (thermoplastics, thermosets, elastomers, reinforced plastics, etc.) and fabricating processes (extrusion, injec tion molding, blow molding, forming, foaming, rotational molding, etc.). They are presented so that the technical or non-technical reader can readily understand the interrelationships.
Download or read book Materials for Inspirational Design written by Chris Lefteri and published by Rockport Publishers. This book was released on 2007-01-01 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: This informative and attractive book will provide education and inspiration for design professionals and students alike. Materials for Inspirational Design provides today's designer with a myriad of material possibilities. The book introduces the properties of wood, metal, glass, ceramics and plastic, all in an informative and inspirational format. The book covers a wide range of information its inclusion of both everyday, familiar products and those that are new, exciting and unexpected. The book is highly informative in that each application is introduced with detailed authorial comment, and numerous interviews with the designers and manufacturers are also included. The book covers a wide range of areas, exploring the application of materials in architecture, interior design, product design, furniture design, fashion and applied arts, all combined with solid technical information.
Download or read book Designing Plastic Parts for Assembly written by Paul A. Tres and published by Carl Hanser Verlag GmbH Co KG. This book was released on 2024-01-15 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: For 30 years, "Designing Plastic Parts for Assembly" has been the definitive guide for both seasoned part designers and novices to the field, facilitating cost-effective design decisions and ensuring that the plastic parts and products will stand up under use. The detailed yet simplified discussion of material selection, manufacturing techniques, and assembly procedures enables the reader to evaluate plastic materials and design plastic parts with confidence. Good joint design and implementation, the geometry and nature of the component parts, the types of load involved, and other fundamental information necessary for a successful outcome are all included. Throughout, the treatment is practice-oriented and focused on everyday problems and situations. The 10th edition includes an extensive revision of the chapter on welding techniques for plastics, including a new subchapter on hot gas welding. There are also many more minor updates, improvements, and corrections throughout.
Download or read book Plastic Dreams written by Charlotte Fiell and published by Carlton Publishing Group. This book was released on 2009 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastic dreams raises the aesthetic perception of plastics and celebrates their nobility as materials by bringing together an exquisite survey of landmark product designs in plastics, from Bakelite in the 1920s to the latest techno-polymers today. -- cover.
Download or read book Corrosion Resistant Plastic Composites in Chemical Plant Design written by John H. Mallinson and published by CRC Press. This book was released on 2020-09-10 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers piping, buried pipe, duct systems, recommendations for fire safety and smoke, abrasion resistance of fiberglass reinforced plastic (FRP), mechanism of FRP corrosion and deterioration, grounding of FRP systems, and popular fabrication methods of FRP.
Download or read book Designing Successful Products with Plastics written by Mark T. MacLean-Blevins and published by Elsevier. This book was released on 2024-05-15 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designing Successful Products with Plastics: Fundamentals of Plastic Part Design 2e provides expert insight into design considerations required to bring a concept product or part through design and ready-for-production. Rather than focusing on design rules and engineering equations used during product development, the emphasis of the book is on what the designer needs to consider during the early conceptual visualization stages, and in the detailed stages of the design process. This fully updated edition features new practical advice on how to design sustainably throughout the book. This approach will bridge the gap between the industrial designer, tasked with the ‘big picture’ product design and use, and the part designer, tasked with the detailed plastic part design for manufacture. Useful to both experienced and novice designers, this book brings valuable design process information through specific examples, enabling designers and engineers in the plastics industry to effectively use the available technical information to successfully design and manufacture new products. Brings together the worlds of the plastic part designer and the industrial designer and shows how each impacts the success of a development project. Teaches the “Four Pillars considerations (Materials, Processes, Tooling, and Design) required for every design decision to be made during a plastic part design project. The interrelationship of these considerations with the sustainability intent for the product being developed is taught and illustrated within this new edition. Illustrates the product design process roadmap from creation of the concept through implementation into manufacturing, highlighting steps and methods used throughout the process to limit risk and ensure success. Includes methods and design project management techniques used to ensure an efficient design process and successful manufacturing of the product or part.
