Download or read book Plasma Science and Technology for Emerging Economies written by Rajdeep Singh Rawat and published by Springer. This book was released on 2017-10-07 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights plasma science and technology-related research and development work at institutes and universities networked through Asian African Association for Plasma Training (AAAPT) which was established in 1988. The AAAPT, with 52 member institutes in 24 countries, promotes the initiation and intensification of plasma research and development through cooperation and technology sharing. With 13 chapters on fusion-relevant, laboratory and industrial plasmas for wide range of applications and basic research and a chapter on AAAPT network, it demonstrates how, with collaborations, high-quality, industrially relevant academic and scientific research on fusion, industrial and laboratory plasmas and plasma diagnostics can be successfully pursued in small research labs. These plasma sciences and technologies include pioneering breakthroughs and applications in (i) fusion relevant research in the quest for long-term, clean energy source development using high-temperature, high- density plasmas and (ii) multibillion-dollar, low-temperature, non-equilibrium and thermal industrial plasmas used in processing, synthesis and electronics.
Download or read book Plasma and Fusion Science written by B. Raneesh and published by CRC Press. This book was released on 2018-01-03 with total page 387 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this new book, an interdisciplinary and international team of experts provides an exploration of the emerging plasma science that is poised to make the plasma technology a reality in the manufacturing sector. The research presented here will stimulate new ideas, methods, and applications in the field of plasma science and nanotechnology. Plasma technology applications are being developed that could impact the global market for power, electronics, mineral, and other fuel commodities. Currently, plasma science is described as a revolutionary discipline in terms of its possible impact on industrial applications. It offers potential solutions to many problems using emerging techniques. In this book the authors provide a broad overview of recent trends in field plasma science and nanotechnology. Divided into several parts, Plasma and Fusion Science: From Fundamental Research to Technological Applications explores some basic plasma applications and research, space and atmospheric plasma, nuclear fusion, and laser plasma and industrial applications of plasma. A wide variety of cutting-edge topics are covered, including: • basic plasma physics • computer modeling for plasma • exotic plasma (including dusty plasma) • industrial plasma applications • laser plasma • nuclear fusion technology • plasma diagnostics • plasma processing • pulsed power • space astrophysical plasma • plasma and nanotechnology Pointing to current and possible future developments in plasma science and technology, the diverse research presented here will be valuable for researchers, scientists, industry professionals, and others involved in the revolutionary field of plasma and fusion science.
Download or read book Plasma Processing of Materials written by National Research Council and published by National Academies Press. This book was released on 1991-02-01 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma processing of materials is a critical technology to several of the largest manufacturing industries in the worldâ€"electronics, aerospace, automotive, steel, biomedical, and toxic waste management. This book describes the relationship between plasma processes and the many industrial applications, examines in detail plasma processing in the electronics industry, highlights the scientific foundation underlying this technology, and discusses education issues in this multidisciplinary field. The committee recommends a coordinated, focused, and well-funded research program in this area that involves the university, federal laboratory, and industrial sectors of the community. It also points out that because plasma processing is an integral part of the infrastructure of so many American industries, it is important for both the economy and the national security that America maintain a strong leadership role in this technology.
Download or read book Plasma Science written by National Academies of Sciences Engineering and Medicine and published by . This book was released on 2021-02-28 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma Science and Engineering transforms fundamental scientific research into powerful societal applications, from materials processing and healthcare to forecasting space weather. Plasma Science: Enabling Technology, Sustainability, Security and Exploration discusses the importance of plasma research, identifies important grand challenges for the next decade, and makes recommendations on funding and workforce. This publication will help federal agencies, policymakers, and academic leadership understand the importance of plasma research and make informed decisions about plasma science funding, workforce, and research directions.
Download or read book Plasma Science and Technology written by Herman Boenig and published by Cornell University Press. This book was released on 2019-06-30 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: In a systematic and comprehensive manner, this book describes the science of low-temperature plasma—a new field that is emerging at a fast pace. An expert well known in this field gives a coherent overview of the applications of low-temperature plasmas to chemical reactions, and in greater detail, to polymers formed or treated in plasma. After laying the groundwork with chapters on the nature of plasma and the variety of typical reactions that occur in discharges, the author deals with specific applications in the production of polymers. He then devotes a chapter each to the deposition of films, the nature of polymers produced in plasmas, and the specific properties of polymers, with a concluding chapter on additional applications of plasma technology. Herman Boenig emphasizes thin-film depositions—their high quality and integrity, as well as their applications in a variety of industrially important uses, including microcircuitry, integrated optics, and metal and other material coatings. He also discusses extensively the applications of plasma deposition in other areas such as high adhesion to metals, polymers, and glasses; high temperature resistance; special friction characteristics; and use in reverse osmosis, permselectivity, and other membrane applications. In a special chapter he covers the use of plasma in ion implantations, plasma cleaning of materials surfaces, and the technique now being considered for use in devices to clean polluted air and convert waste products in submarines and space capsules. Plasma Science and Technology should prove invaluable as a text for graduate students and advanced undergraduates, and as a reference for chemists, material scientists, metallurgists, environmental scientists, engineers, and physicists. It will be of particular interest to those involved in microcircuitry, microcomputers, integrated optics, optical equipment, desalination, biomedicine, thin films, adhesion, ion implantation, textile treatment, advanced composites, and chemical synthesis.
Download or read book Emerging Applications of Plasma Science in Allied Technologies written by Shahzad, Aamir and published by IGI Global. This book was released on 2024-01-29 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: The scientific application of plasma across a variety of fields continues to expand with new research at a remarkable rate. The convergence between plasma science and domains such as energy materials, semiconductor systems, textiles, medicine, agriculture, and space exploration is merely scratching the surface of the known possibilities of this technology. Scientists require a sound understanding of the current state of these possibilities in order to push the technology further into the unknown potential of plasma science. The chapters of the book Emerging Applications of Plasma Science in Allied Technologies coalesce to form a holistic panorama of innovations, encompassing everything from sustainable energy solutions to antimicrobial applications. This book stands as a definitive guide to the forefront of innovation and offers a comprehensive dive into the profound impacts of plasma science across diverse fields, presenting a synthesis of cutting-edge research and development. It opens with a meticulous overview of the foundational principles underpinning plasma science, serving as a springboard for the exploration of its myriad applications. From fundamental physics and mechanisms to innovative designs and allied technologies, the pages illuminate the multifaceted dimensions of plasma-based advancements. Plasma technology catalyzes advancements in modern medicine and healthcare. The intricate interplay between plasma-based treatments and living tissues is dissected, revealing a landscape where innovation bridges the gap between science fiction and reality. This book unpacks the critical role of plasma science in the eco-friendly conversion of carbon dioxide, thereby offering a beacon of hope in the struggle against climate change. This book is a trailblazing resource for academics, researchers, and postgraduate students, offering a comprehensive foundation in this groundbreaking field. Industry professionals, from biomedical engineers to agricultural innovators, will find a treasure trove of insights to fuel their work. This book beckons policymakers and visionaries to comprehend the potential of plasma science in steering humanity toward sustainable, cleaner, and healthier futures.
Download or read book Advances in Synthesis Gas Methods Technologies and Applications written by Mohammad Reza Rahimpour and published by Elsevier. This book was released on 2022-10-18 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Synthesis Gas: Methods, Technologies and Applications: Syngas Production and Preparation is a collection of various chapters concerning many aspects of syngas production technologies, including common methods like gasification, steam/dry/autothermal reforming, membrane technology, etc., along with novel methods like plasma technology, micro-reactors, electrolysis processes as well as photocatalytic systems. In addition, different sources for producing syngas, including oil, crude oil, heavy oil, microalgae, black liquor, tar and bitumen, as well as municipal, agricultural, food, plastic, wood and cardboard wastes are described in detail. Introduces syngas characteristics and its properties Describes various methods and technologies for producing syngas Discusses syngas production from different roots and feedstocks
Download or read book Plasma Science and Technology written by Haikel Jelassi and published by BoD – Books on Demand. This book was released on 2019-02-27 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Usually called the "fourth state of matter," plasmas make up more than 99% of known material. In usual terminology, this term generally refers to partially or totally ionized gas and covers a large number of topics with very different characteristics and behaviors. Over the last few decades, the physics and engineering of plasmas was experiencing a renewed interest, essentially born of a series of important applications such as thin-layer deposition, surface treatment, isotopic separation, integrated circuit etchings, medicine, etc. Plasma Science
Download or read book Plasma Science written by National Research Council and published by National Academies Press. This book was released on 1995-02-01 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma science is the study of ionized states of matter. This book discusses the field's potential contributions to society and recommends actions that would optimize those contributions. It includes an assessment of the field's scientific and technological status as well as a discussion of broad themes such as fundamental plasma experiments, theoretical and computational plasma research, and plasma science education.
Download or read book Polymers from Renewable Resources written by George Z. Papageorgiou and published by MDPI. This book was released on 2019-01-10 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Polymers from Renewable Resources" that was published in Polymers
Download or read book The British Chess Magazine Volume 16 written by Anonymous and published by Legare Street Press. This book was released on 2022-10-27 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as we know it. This work is in the "public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.
Download or read book Plasma Science and Technology written by Alexander Fridman and published by John Wiley & Sons. This book was released on 2024-02-05 with total page 805 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma Science and Technology An accessible introduction to the fundamentals of plasma science and its applications In Plasma Science and Technology: Lectures in Physics, Chemistry, Biology, and Engineering, distinguished researcher Dr. Alexander Fridman delivers a comprehensive introduction to plasma technology, including fulsome descriptions of the fundamentals of plasmas and discharges. The author discusses a wide variety of practical applications of the technology to medicine, energy, catalysis, coatings, and more, emphasizing engineering and science fundamentals. Offering readers illuminating problems and concept questions to support understanding and self-study, the book also details organic and inorganic applications of plasma technologies, demonstrating its use in nature, in the lab, and in both novel and well-known applications. Readers will also find: A thorough introduction to the kinetics of excited atoms and molecules Comprehensive explorations of non-equilibrium atmospheric pressure cold discharges Practical discussions of plasma processing in microelectronics and other micro-technologies Expert treatments of plasma in environmental control technologies, including the cleaning of air, exhaust gases, water, and soil Perfect for students of chemical engineering, physics, and chemistry, Plasma Science and Technology will also benefit professionals working in these fields who seek a contemporary refresher in the fundamentals of plasma science and its applications.
Download or read book Plasma Science and Technology Principles and Applications written by Eddie Rocco and published by States Academic Press. This book was released on 2021-11-16 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma is a fundamental state of matter which is produced by heating or subjecting a neutral gas to strong electromagnetic radiation. They are ionized gases which are highly electrically conductive in nature. The study of nonlinear collective interactions of electrically charged particles with each other, with electric and magnetic fields, and with neutral atoms and molecules is termed as plasma science. Depending upon the temperature and density of the environment, plasma may be fully or partially ionized. Factors which define an ideal plasma are plasma approximation, bulk interactions and plasma frequency. Sources of plasma include glow discharge plasmas, cascaded arc plasma, capacitively coupled plasma and inductively coupled plasma. Neon signs, fluorescent light bulbs, propulsion of spacecraft and plasma display panels are some of its common applications. While understanding the long-term perspectives of the topics, the book makes an effort in highlighting their impact as a modern tool for the growth of the discipline. It attempts to understand the multiple branches that fall under the discipline of plasma science and technology and how such concepts have practical applications. As this field is emerging at a rapid pace, the contents of this book will help the readers understand the modern concepts and applications of the subject.
Download or read book Plasma Science and Technology written by Tetsu Mieno and published by BoD – Books on Demand. This book was released on 2016-04-20 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the early twentieth century, Dr. Irving Langmuir actively studied plasma discharge and surface science. Since then, great progress has been made in the development of applications of discharges and plasmas such as discharge lamps, electric tubes, and arc welding. In relation to studies on space physics and controlled nuclear fusion, plasma physics has greatly advanced. Plasma chemistry has also progressed along with its applications in LSI fabrication technology, the chemical vapor deposition of functional films, and the production of nanomaterials. In the twenty-first century, the further development of applications of plasma physics and plasma chemistry is certainly expected. In this book, 18 chapters on the recent progress in plasma science and technology have been written by active specialists worldwide.
Download or read book Plasma Science written by National Research Council and published by National Academies Press. This book was released on 2008-01-20 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: As part of its current physics decadal survey, Physics 2010, the NRC was asked by the DOE, NSF, and NASA to carry out an assessment of and outlook for the broad field of plasma science and engineering over the next several years. The study was to focus on progress in plasma research, identify the most compelling new scientific opportunities, evaluate prospects for broader application of plasmas, and offer guidance to realize these opportunities. The study paid particular attention to these last two points. This "demand-side" perspective provided a clear look at what plasma research can do to help achieve national goals of fusion energy, economic competitiveness, and nuclear weapons stockpile stewardship. The report provides an examination of the broad themes that frame plasma research: low-temperature plasma science and engineering; plasma physics at high energy density; plasma science of magnetic fusion; space and astrophysical science; and basic plasma science. Within those themes, the report offers a bold vision for future developments in plasma science.
Download or read book Plasma Science and Technology written by Aamir Shahzad and published by BoD – Books on Demand. This book was released on 2022-02-23 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma science and technology (PST) is a discipline investigating fundamental transport behaviors, interaction physics, and reaction chemistry of plasma and its applications in different technologies and fields. Plasma has uses in refrigeration, biotechnology, health care, microelectronics and semiconductors, nanotechnology, space and environmental sciences, and so on. This book provides a comprehensive overview of PST, including information on different types of plasma, basic interactions of plasma with organic materials, plasma-based energy devices, low-temperature plasma for complex systems, and much more.
Download or read book Plasma Physics and Fusion Energy written by Jeffrey P. Freidberg and published by Cambridge University Press. This book was released on 2008-07-10 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt: There has been an increase in interest worldwide in fusion research over the last decade and a half due to the recognition that a large number of new, environmentally attractive, sustainable energy sources will be needed to meet ever increasing demand for electrical energy. Based on a series of course notes from graduate courses in plasma physics and fusion energy at MIT, the text begins with an overview of world energy needs, current methods of energy generation, and the potential role that fusion may play in the future. It covers energy issues such as the production of fusion power, power balance, the design of a simple fusion reactor and the basic plasma physics issues faced by the developers of fusion power. This book is suitable for graduate students and researchers working in applied physics and nuclear engineering. A large number of problems accumulated over two decades of teaching are included to aid understanding.
