Download or read book Plasma Processes and Polymers written by Riccardo d'Agostino and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume compiles essential contributions to the most innovative fields of Plasma Processes and Polymers. High-quality contributions cover the fields of plasma deposition, plasma treatment of polymers and other organic compounds, plasma processes under partial vacuum and at atmospheric pressure, biomedical, textile, automotive, and optical applications as well as surface treatment of bulk materials, clusters, particles and powders. This unique collection of refereed papers is based on the best contributions presented at the 16th International Symposium on Plasma Chemistry in Taormina, Italy (ISPC-16, June 2003). A high class reference of relevance to a large audience in plasma community as well as in the area of its industrial applications.
Download or read book Atmospheric Pressure Plasma Treatment of Polymers written by Michael Thomas and published by John Wiley & Sons. This book was released on 2013-06-19 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: An indispensable volume detailing the current and potential applications of atmospheric pressure plasma treatment by experts practicing in fields around the world Polymers are used in a wide variety of industries to fabricate legions of products because of their many desirable traits. However, polymers in general (and polyolefins, in particular) are innately not very adhesionable because of the absence of polar or reactive groups on their surfaces and concomitant low surface energy. Surface treatment of polymers, however, is essential to impart reactive chemical groups on their surfaces to enhance their adhesion characteristic. Proper surface treatment can endow polymers with improved adhesion without affecting the bulk properties. A plethora of techniques (ranging from wet to dry, simple to sophisticated, vacuum to non-vacuum) for polymer surface modification have been documented in the literature but the Atmospheric Pressure Plasma (APP) treatment has attracted much attention because it offers many advantages vis-a-vis other techniques, namely uniform treatment, continuous operation, no need for vacuum, simplicity, low cost, no environmental or disposal concern, and applicability to large area samples. Although the emphasis in this book is on the utility of APP treatment for enhancement of polymer adhesion, APP is also applicable and effective to modulate many other surface properties of polymers: superhydrophilicity, superhydrophobicity, anti-fouling, anti-fogging, anti-icing, cell adhesion, biocompatibility, tribological behavior, etc. The key features of Atmospheric Pressure Plasma Treatment of Polymers: Address design and functions of various types of reactors Bring out current and potential applications of APP treatment Represent the cumulative wisdom of many key academic and industry researchers actively engaged in this key and enabling technology
Download or read book Plasma Processing of Polymers written by Ricardo d'Agostino and published by Springer Science & Business Media. This book was released on 1997-11-30 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the NATO Advanced Study Institute on Plasma Treatments and Deposition of Polymers, Acquafredda di Maratea, Italy, May 19-June 2, 1996
Download or read book Plasma Medicine written by Alexander Fridman and published by John Wiley & Sons. This book was released on 2012-12-19 with total page 629 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive text is suitable for researchers and graduate students of a ‘hot’ new topic in medical physics. Written by the world’s leading experts, this book aims to present recent developments in plasma medicine, both technological and scientific, reviewed in a fashion accessible to the highly interdisciplinary audience consisting of doctors, physicists, biologists, chemists and other scientists, university students and professors, engineers and medical practitioners. The book focuses on major topics and covers the physics required to develop novel plasma discharges relevant for medical applications, the medicine to apply the technology not only in-vitro but also in-vivo testing and the biology to understand complicated bio-chemical processes involved in plasma interaction with living tissues.
Download or read book Plasma Processing of Materials written by National Research Council and published by National Academies Press. This book was released on 1991-02-01 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma processing of materials is a critical technology to several of the largest manufacturing industries in the worldâ€"electronics, aerospace, automotive, steel, biomedical, and toxic waste management. This book describes the relationship between plasma processes and the many industrial applications, examines in detail plasma processing in the electronics industry, highlights the scientific foundation underlying this technology, and discusses education issues in this multidisciplinary field. The committee recommends a coordinated, focused, and well-funded research program in this area that involves the university, federal laboratory, and industrial sectors of the community. It also points out that because plasma processing is an integral part of the infrastructure of so many American industries, it is important for both the economy and the national security that America maintain a strong leadership role in this technology.
Download or read book The Plasma Chemistry of Polymer Surfaces written by Jörg Friedrich and published by John Wiley & Sons. This book was released on 2012-05-29 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: More than 99% of all visible matter in the universe occurs as highly ionized gas plasma with high energy content. Electrical low- and atmospheric-pressure plasmas are characterized by continuous source of moderate quantities of energy or enthalpy transferred predominantly as kinetic energy of electrons. Therefore, such energetically unbalanced plasmas have low gas temperature but produce sufficient energy for inelastic collisions with atoms and molecules in the gas phase, thus producing reactive species and photons, which are able to initiate all types of polymerizations or activate any surface of low reactive polymers. However, the broadly distributed energies in the plasma exceed partially the binding energies in polymers, thus initiating very often unselective reactions and polymer degradation. The intention of this book is to present new plasma processes and new plasma reactions of high selectivity and high yield. This book aims to bridge classical and plasma chemistry, particularly focusing on polymer chemistry in the bulk and on the surface under plasma exposure. The stability of surface functionalization and the qualitative and quantitative measurement of functional groups at polymer surface are featured prominently, and chemical pathways for suppressing the undesirable side effects of plasma exposure are proposed and illustrated with numerous examples. Special attention is paid to the smooth transition from inanimate polymer surfaces to modified bioactive polymer surfaces. A wide range of techniques, plasma types and applications are demonstrated.
Download or read book Plasma Deposition Treatment and Etching of Polymers written by Riccardo d'Agostino and published by Elsevier. This book was released on 2012-12-02 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma Deposition, Treatment, and Etching of Polymers takes a broad look at the basic principles, the chemical processes, and the diagnostic procedures in the interaction of plasmas with polymer surfaces. This recent technology has yielded a large class of new materials offering many applications, including their use as coatings for chemical fibers and films. Additional applications include uses for the passivation of metals, the surface hardening of tools, increased biocompatibility of biomedical materials, chemical and physical sensors, and a variety of micro- and optoelectronic devices. Appeals to a broad range of industries from microelectronics to space technology Discusses a wide array of new uses for plasma polymers Provides a tutorial introduction to the field Surveys various classes of plasma polymers, their chemical and morphological properties, effects of plasma process parameters on the growth and structure of these synthetic materials, and techniques for characterization Interests scientists, engineers, and students alike
Download or read book Surface Modification of Polymers written by Jean Pinson and published by John Wiley & Sons. This book was released on 2020-02-18 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: A guide to modifying and functionalizing the surfaces of polymers Surface Modification of Polymers is an essential guide to the myriad methods that can be employed to modify and functionalize the surfaces of polymers. The functionalization of polymer surfaces is often required for applications in sensors, membranes, medicinal devices, and others. The contributors?noted experts on the topic?describe the polymer surface in detail and discuss the internal and external factors that influence surface properties. This comprehensive guide to the most important methods for the introduction of new functionalities is an authoritative resource for everyone working in the field. This book explores many applications, including the plasma polymerization technique, organic surface functionalization by initiated chemical vapor deposition, photoinduced functionalization on polymer surfaces, functionalization of polymers by hydrolysis, aminolysis, reduction, oxidation, surface modification of nanoparticles, and many more. Inside, readers will find information on various applications in the biomedical field, food science, and membrane science. This important book: -Offers a range of polymer functionalization methods for biomedical applications, water filtration membranes, and food science -Contains discussions of the key surface modification methods, including plasma and chemical techniques, as well as applications for nanotechnology, environmental filtration, food science, and biomedicine -Includes contributions from a team of international renowned experts Written for polymer chemists, materials scientists, plasma physicists, analytical chemists, surface physicists, and surface chemists, Surface Modification of Polymers offers a comprehensive and application-oriented review of the important functionalization methods with a special focus on biomedical applications, membrane science, and food science.
Download or read book Nonthermal Plasmas for Materials Processing written by Jörg Florian Friedrich and published by John Wiley & Sons. This book was released on 2022-07-15 with total page 805 pages. Available in PDF, EPUB and Kindle. Book excerpt: NONTHERMAL PLASMAS FOR MATERIALS PROCESSING This unique book covers the physical and chemical aspects of plasma chemistry with polymers and gives new insights into the interaction of physics and chemistry of nonthermal plasmas and their applications in materials science for physicists and chemists. The properties and characteristics of plasmas, elementary (collision) processes in the gas phase, plasma surface interactions, gas discharge plasmas and technical plasma sources, atmospheric plasmas, plasma diagnostics, polymers and plasmas, plasma polymerization, post-plasma processes, plasma, and wet-chemical processing, plasma-induced generation of functional groups, and the chemical reactions on these groups along with a few exemplary applications are discussed in this comprehensive but condensed state-of-the-art book on plasma chemistry and its dependence on plasma physics. While plasma physics, plasma chemistry, and polymer science are often handled separately, the aim of the authors is to harmoniously join the physics and chemistry of low-pressure and atmospheric-pressure plasmas with polymer surface chemistry and polymerization and to compare such chemistry with classic chemistry. Readers will find in these chapters Interaction of plasma physics and chemistry in plasmas and at the surface of polymers; Explanation and interpretation of physical and chemical mechanisms on plasma polymerization and polymer surface modification; Introduction of modern techniques in plasma diagnostics, surface analysis of solids, and special behavior of polymers on exposure to plasmas; Discussion of the conflict of energy-rich plasma species with permanent energy supply and the much lower binding energies in polymers and alternatives to avoid random polymer decomposition Technical applications such as adhesion, cleaning, wettability, textile modification, coatings, films, etc. New perspectives are explained about how to use selective and mild processes to allow post-plasma chemistry on non-degraded polymer surfaces. Audience Physicists, polymer chemists, materials scientists, industrial engineers in biomedicine, coatings, printing, etc.
Download or read book Plasma Surface Modification and Plasma Polymerization written by Norihiro Inagaki and published by CRC Press. This book was released on 2014-07-22 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: In current materials R&D, high priority is given to surface modification techniques to achieve improved surface properties for specific applications requirements. Plasma treatment and polymerization are important technologies for this purpose. This book provides a basic and thorough presentation of this subject. This is probably the first book to cover plasma treatment and polymerization for the purpose of surface modification. Chemistry, processes and applications are detailed. More than 150 figures include numerous schematics which illustrate the chemistry and processes. More than 100 tables and graphics provide useful reference data in convenient form.
Download or read book Plasma Polymerization written by H K Yasuda and published by Academic Press. This book was released on 2012-12-02 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma Polymerization aims to bridge the conceptual gap between the academic and practical approaches to plasma polymerization and highlights the significance of plasma polymerization in materials science and technology. The major topics covered are gas-phase kinetics, ionization of gases, fundamentals of polymerization, mechanism of polymer formation in plasma, competitive aspects of polymer formation and ablation, mechanism of polymer deposition, operational factors of plasma polymerization, and electrical properties of plasma polymers. This book is comprised of 11 chapters and begins with a brief overview of plasma polymerization and its growing importance for the formation of entirely new kinds of materials. The discussion then shifts to a comparison between plasma-state polymerization and plasma-induced polymerization, between plasma polymerization and graft polymerization, and between plasma polymerization and radiation polymerization. The reader is also introduced to fundamental aspects of gas-phase reactions, paying particular attention to the classical kinetic theory of gas, as well as the mechanisms of formation of polymeric materials in plasma, competitive ablation and polymer formation in plasma, and polymer deposition in plasma polymerization. The operational parameters of plasma polymerization are described and a chapter devoted to the electrical properties of plasma-polymerized thin organic films concludes the book. This book will be of interest to students and researchers of material science.
Download or read book Plasma Processes and Plasma Kinetics written by Boris M. Smirnov and published by John Wiley & Sons. This book was released on 2008-09-26 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: This problems supplement to plasma physics textbooks covers plasma theory for both science and technology. Written by a renowned plasma scientist, experienced book author and skilled teacher, it treats all aspects of plasma theory in no fewer than 520 very detailed worked-out problems. With this systematic collection the reader will gain a sound understanding of plasma physics in all fields, from fusion and astrophysics to surface treatment. The book also includes the transport of particles as well as radiation in plasmas, and while designed for graduate students and young researchers, it can equally serve as a reference.
Download or read book Plasma Chemistry written by Alexander Fridman and published by Cambridge University Press. This book was released on 2008-05-05 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a fundamental introduction to all aspects of modern plasma chemistry, this book describes mechanisms and kinetics of chemical processes in plasma, plasma statistics, thermodynamics, fluid mechanics and electrodynamics, as well as all major electric discharges applied in plasma chemistry. Fridman considers most of the major applications of plasma chemistry, from electronics to thermal coatings, from treatment of polymers to fuel conversion and hydrogen production and from plasma metallurgy to plasma medicine. It is helpful to engineers, scientists and students interested in plasma physics, plasma chemistry, plasma engineering and combustion, as well as chemical physics, lasers, energy systems and environmental control. The book contains an extensive database on plasma kinetics and thermodynamics and numerical formulas for practical calculations related to specific plasma-chemical processes and applications. Problems and concept questions are provided, helpful in courses related to plasma, lasers, combustion, chemical kinetics, statistics and thermodynamics, and high-temperature and high-energy fluid mechanics.
Download or read book Advances in Plasma Processes for Polymers written by Choon-Sang Park and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Plasma Processes for Polymers II written by Choon-Sang Park and published by Mdpi AG. This book was released on 2023-08-17 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Special Issue aimed to compile original and cutting-edge research works in the fields of plasma process, polymerization, synthesis, characterization, treatment, modification, manufacturing, and applications of functional plasma-processed polymers.
Download or read book Plasma Polymer Films written by Hynek Biederman and published by World Scientific. This book was released on 2004 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma Polymer Films examines the current status of the deposition and characterization of fluorocarbon-, hydrocarbon- and silicon-containing plasma polymer films and nanocomposites, with plasma polymer matrix. It introduces plasma polymerization process diagnostics such as optical emission spectroscopy (OES, AOES), and describes special deposition techniques such as atmospheric pressure glow discharge. Important issues for applications such as degradation and stability are treated in detail, and structural characterization, basic electrical and optical properties and biomedical applications are discussed.
Download or read book Plasma Polymerization Processes written by Hynek Biederman and published by Elsevier Science & Technology. This book was released on 1992 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to show how to make useful plasma polymerization processes resulting in polymeric (organic) materials - usually thin films of the desirable properties. The main emphasis is on the detailed discussion of the deposition apparatus, deposition parameters and properties of the obtained films. The historical background and the processes related to plasma polymerization are discussed. Fundamentals of plasma physics and plasma chemistry are concisely reviewed and used as a base for the explanation of plasma polymerization principles and its models. Special attention is devoted to the real plasma polymerization reactors and various polymer film deposition arrangements. Many technical details are examined including the influence of process parameters on the properties of the resulting plasma polymers. New systems based on a microwave discharge are also described. The properties of the most important plasma polymers - plasma polymerized organosilicons, halocarbons and composite metal/plasma polymers are reviewed. Finally, the applications of plasma polymers are presented, e.g. for passivation and protective coatings, lithography and optical beam recording, electrophotography, microelectronics, modifications of conventional polymer surfaces - biomedical uses, membranes, etc. Future prospects and developments in plasma polymerization e.g. for molecular electronics and other areas are also outlined.
