Download or read book Plasma Polymerization written by H K Yasuda and published by Academic Press. This book was released on 2012-12-02 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma Polymerization aims to bridge the conceptual gap between the academic and practical approaches to plasma polymerization and highlights the significance of plasma polymerization in materials science and technology. The major topics covered are gas-phase kinetics, ionization of gases, fundamentals of polymerization, mechanism of polymer formation in plasma, competitive aspects of polymer formation and ablation, mechanism of polymer deposition, operational factors of plasma polymerization, and electrical properties of plasma polymers. This book is comprised of 11 chapters and begins with a brief overview of plasma polymerization and its growing importance for the formation of entirely new kinds of materials. The discussion then shifts to a comparison between plasma-state polymerization and plasma-induced polymerization, between plasma polymerization and graft polymerization, and between plasma polymerization and radiation polymerization. The reader is also introduced to fundamental aspects of gas-phase reactions, paying particular attention to the classical kinetic theory of gas, as well as the mechanisms of formation of polymeric materials in plasma, competitive ablation and polymer formation in plasma, and polymer deposition in plasma polymerization. The operational parameters of plasma polymerization are described and a chapter devoted to the electrical properties of plasma-polymerized thin organic films concludes the book. This book will be of interest to students and researchers of material science.
Download or read book Plasma Surface Modification and Plasma Polymerization written by Norihiro Inagaki and published by CRC Press. This book was released on 2014-07-22 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: In current materials R&D, high priority is given to surface modification techniques to achieve improved surface properties for specific applications requirements. Plasma treatment and polymerization are important technologies for this purpose. This book provides a basic and thorough presentation of this subject. This is probably the first book to cover plasma treatment and polymerization for the purpose of surface modification. Chemistry, processes and applications are detailed. More than 150 figures include numerous schematics which illustrate the chemistry and processes. More than 100 tables and graphics provide useful reference data in convenient form.
Download or read book Plasma Polymer Films written by Hynek Biederman and published by World Scientific. This book was released on 2004 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma Polymer Films examines the current status of the deposition and characterization of fluorocarbon-, hydrocarbon- and silicon-containing plasma polymer films and nanocomposites, with plasma polymer matrix. It introduces plasma polymerization process diagnostics such as optical emission spectroscopy (OES, AOES), and describes special deposition techniques such as atmospheric pressure glow discharge. Important issues for applications such as degradation and stability are treated in detail, and structural characterization, basic electrical and optical properties and biomedical applications are discussed.
Download or read book Atmospheric Pressure Plasma Treatment of Polymers written by Michael Thomas and published by John Wiley & Sons. This book was released on 2013-06-19 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: An indispensable volume detailing the current and potential applications of atmospheric pressure plasma treatment by experts practicing in fields around the world Polymers are used in a wide variety of industries to fabricate legions of products because of their many desirable traits. However, polymers in general (and polyolefins, in particular) are innately not very adhesionable because of the absence of polar or reactive groups on their surfaces and concomitant low surface energy. Surface treatment of polymers, however, is essential to impart reactive chemical groups on their surfaces to enhance their adhesion characteristic. Proper surface treatment can endow polymers with improved adhesion without affecting the bulk properties. A plethora of techniques (ranging from wet to dry, simple to sophisticated, vacuum to non-vacuum) for polymer surface modification have been documented in the literature but the Atmospheric Pressure Plasma (APP) treatment has attracted much attention because it offers many advantages vis-a-vis other techniques, namely uniform treatment, continuous operation, no need for vacuum, simplicity, low cost, no environmental or disposal concern, and applicability to large area samples. Although the emphasis in this book is on the utility of APP treatment for enhancement of polymer adhesion, APP is also applicable and effective to modulate many other surface properties of polymers: superhydrophilicity, superhydrophobicity, anti-fouling, anti-fogging, anti-icing, cell adhesion, biocompatibility, tribological behavior, etc. The key features of Atmospheric Pressure Plasma Treatment of Polymers: Address design and functions of various types of reactors Bring out current and potential applications of APP treatment Represent the cumulative wisdom of many key academic and industry researchers actively engaged in this key and enabling technology
Download or read book Plasma Deposition Treatment and Etching of Polymers written by Riccardo d'Agostino and published by Elsevier. This book was released on 2012-12-02 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma Deposition, Treatment, and Etching of Polymers takes a broad look at the basic principles, the chemical processes, and the diagnostic procedures in the interaction of plasmas with polymer surfaces. This recent technology has yielded a large class of new materials offering many applications, including their use as coatings for chemical fibers and films. Additional applications include uses for the passivation of metals, the surface hardening of tools, increased biocompatibility of biomedical materials, chemical and physical sensors, and a variety of micro- and optoelectronic devices. Appeals to a broad range of industries from microelectronics to space technology Discusses a wide array of new uses for plasma polymers Provides a tutorial introduction to the field Surveys various classes of plasma polymers, their chemical and morphological properties, effects of plasma process parameters on the growth and structure of these synthetic materials, and techniques for characterization Interests scientists, engineers, and students alike
Download or read book The Plasma Chemistry of Polymer Surfaces written by Jörg Friedrich and published by John Wiley & Sons. This book was released on 2012-05-29 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: More than 99% of all visible matter in the universe occurs as highly ionized gas plasma with high energy content. Electrical low- and atmospheric-pressure plasmas are characterized by continuous source of moderate quantities of energy or enthalpy transferred predominantly as kinetic energy of electrons. Therefore, such energetically unbalanced plasmas have low gas temperature but produce sufficient energy for inelastic collisions with atoms and molecules in the gas phase, thus producing reactive species and photons, which are able to initiate all types of polymerizations or activate any surface of low reactive polymers. However, the broadly distributed energies in the plasma exceed partially the binding energies in polymers, thus initiating very often unselective reactions and polymer degradation. The intention of this book is to present new plasma processes and new plasma reactions of high selectivity and high yield. This book aims to bridge classical and plasma chemistry, particularly focusing on polymer chemistry in the bulk and on the surface under plasma exposure. The stability of surface functionalization and the qualitative and quantitative measurement of functional groups at polymer surface are featured prominently, and chemical pathways for suppressing the undesirable side effects of plasma exposure are proposed and illustrated with numerous examples. Special attention is paid to the smooth transition from inanimate polymer surfaces to modified bioactive polymer surfaces. A wide range of techniques, plasma types and applications are demonstrated.
Download or read book Plasma Surface Modification of Polymers Relevance to Adhesion written by Kash L. Mittal and published by CRC Press. This book was released on 2014-04-29 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of invited papers (previously published in special issues of the Journal of Adhesion Science and Technology) written by internationally recognized researchers actively working in the field of plasma surface modification. It provides a current, comprehensive overview of the plasma treatment of polymers. In contrast to plasm
Download or read book Surface Modification of Polymers written by Jean Pinson and published by John Wiley & Sons. This book was released on 2020-02-18 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: A guide to modifying and functionalizing the surfaces of polymers Surface Modification of Polymers is an essential guide to the myriad methods that can be employed to modify and functionalize the surfaces of polymers. The functionalization of polymer surfaces is often required for applications in sensors, membranes, medicinal devices, and others. The contributors?noted experts on the topic?describe the polymer surface in detail and discuss the internal and external factors that influence surface properties. This comprehensive guide to the most important methods for the introduction of new functionalities is an authoritative resource for everyone working in the field. This book explores many applications, including the plasma polymerization technique, organic surface functionalization by initiated chemical vapor deposition, photoinduced functionalization on polymer surfaces, functionalization of polymers by hydrolysis, aminolysis, reduction, oxidation, surface modification of nanoparticles, and many more. Inside, readers will find information on various applications in the biomedical field, food science, and membrane science. This important book: -Offers a range of polymer functionalization methods for biomedical applications, water filtration membranes, and food science -Contains discussions of the key surface modification methods, including plasma and chemical techniques, as well as applications for nanotechnology, environmental filtration, food science, and biomedicine -Includes contributions from a team of international renowned experts Written for polymer chemists, materials scientists, plasma physicists, analytical chemists, surface physicists, and surface chemists, Surface Modification of Polymers offers a comprehensive and application-oriented review of the important functionalization methods with a special focus on biomedical applications, membrane science, and food science.
Download or read book Plasma Polymer Films written by Hynek Biederman and published by World Scientific. This book was released on 2004-08-10 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma Polymer Films examines the current status of the deposition and characterization of fluorocarbon-, hydrocarbon- and silicon-containing plasma polymer films and nanocomposites, with plasma polymer matrix. It introduces plasma polymerization process diagnostics such as optical emission spectroscopy (OES, AOES), and describes special deposition techniques such as atmospheric pressure glow discharge. Important issues for applications such as degradation and stability are treated in detail, and structural characterization, basic electrical and optical properties and biomedical applications are discussed. Contents: Plasma Deposition of Fluoropolymer Films in Different Glow Discharge Regimes (P Favia)Deposition of Silicon Containing Films and FTIR Diagnostics (Y Segui & P Raynaud)Corpuscular Diagnostics of Plasma Polymerization Process (M Zeuner)Electrical and Optical Properties of Plasma Polymers (J Tyczkowski)Pulsed Plasma Polymerizations (R B Timmons & A J Griggs)Degradation and Stability of Plasma Polymers (A Holländer & J Thome)Application of Atmospheric Pressure Discharge for Plasma Polymer Processes (M Kogoma)Hard Plasma Polymers, Composites and Plasma Polymer Films Prepared by RF Sputtering of Conventional Polymers (H Biederman et al.)Biomedical Applications of Plasma-Deposited Thin Films (K J Kitching et al.) Readership: Graduate students and researchers in plasma, polymer and surface chemistry. Keywords:Plasma Polymerization;Fluoropolymers;Biomedical Applications;Process Diagnostics
Download or read book Plasma Science and Technology for Emerging Economies written by Rajdeep Singh Rawat and published by Springer. This book was released on 2017-10-07 with total page 805 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights plasma science and technology-related research and development work at institutes and universities networked through Asian African Association for Plasma Training (AAAPT) which was established in 1988. The AAAPT, with 52 member institutes in 24 countries, promotes the initiation and intensification of plasma research and development through cooperation and technology sharing. With 13 chapters on fusion-relevant, laboratory and industrial plasmas for wide range of applications and basic research and a chapter on AAAPT network, it demonstrates how, with collaborations, high-quality, industrially relevant academic and scientific research on fusion, industrial and laboratory plasmas and plasma diagnostics can be successfully pursued in small research labs. These plasma sciences and technologies include pioneering breakthroughs and applications in (i) fusion relevant research in the quest for long-term, clean energy source development using high-temperature, high- density plasmas and (ii) multibillion-dollar, low-temperature, non-equilibrium and thermal industrial plasmas used in processing, synthesis and electronics.
Download or read book Plasma Polymerization Processes written by Hynek Biederman and published by Elsevier Science & Technology. This book was released on 1992 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to show how to make useful plasma polymerization processes resulting in polymeric (organic) materials - usually thin films of the desirable properties. The main emphasis is on the detailed discussion of the deposition apparatus, deposition parameters and properties of the obtained films. The historical background and the processes related to plasma polymerization are discussed. Fundamentals of plasma physics and plasma chemistry are concisely reviewed and used as a base for the explanation of plasma polymerization principles and its models. Special attention is devoted to the real plasma polymerization reactors and various polymer film deposition arrangements. Many technical details are examined including the influence of process parameters on the properties of the resulting plasma polymers. New systems based on a microwave discharge are also described. The properties of the most important plasma polymers - plasma polymerized organosilicons, halocarbons and composite metal/plasma polymers are reviewed. Finally, the applications of plasma polymers are presented, e.g. for passivation and protective coatings, lithography and optical beam recording, electrophotography, microelectronics, modifications of conventional polymer surfaces - biomedical uses, membranes, etc. Future prospects and developments in plasma polymerization e.g. for molecular electronics and other areas are also outlined.
Download or read book Materials Surface Processing by Directed Energy Techniques written by Yves Pauleau and published by Elsevier. This book was released on 2006-04-25 with total page 745 pages. Available in PDF, EPUB and Kindle. Book excerpt: The current status of the science and technology related to coatings, thin films and surface modifications produced by directed energy techniques is assessed in Materials Surface Processing by Directed Energy Techniques. The subject matter is divided into 20 chapters - each presented at a tutorial level – rich with fundamental science and experimental results. New trends and new results are also evoked to give an overview of future developments and applications. Provides a broad overview on modern coating and thin film deposition techniques, and their applications Presents and discusses various problems of physics and chemistry involved in the production, characterization and applications of coatings and thin films Each chapter includes experimental results illustrating various models, mechanisms or theories
Download or read book Polymer Membranes in Biotechnology written by Seeram Ramakrishna and published by World Scientific. This book was released on 2011 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Following an introduction to the general concept of membrane separation in Chapter 1, preparation of polymeric membranes is discussed in Chapter 2. The book then describes in Chapter 3 membrane surface activation, which is a key step in ligand immobilizations. Chapter 4 focuses on ligand immobilization techniques and the organic chemistries behind them. Chapter 5 introduces the application of affinity membrane chromatography Finally, in Chapter 6, membranes used in biosensors and gas sensors, enzymatic membranes used as biosensor, and membrane biosensor for waste water treatment will be discussed. --
Download or read book Polymer Films with Embedded Metal Nanoparticles written by Andreas Heilmann and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an overview of nanostructure determination and ways to find relationships to the electronic and optical properties. The methods described can be applied to a large number of other granular metal-insulator systems and used as a guideline for characterisation and modelling. In addition, the book describes the manufacture of artificially structured nanomaterials using laser or electron-beam irradiation.
Download or read book Functional Polymer Films 2 Volume Set written by Wolfgang Knoll and published by John Wiley & Sons. This book was released on 2013-02-12 with total page 1107 pages. Available in PDF, EPUB and Kindle. Book excerpt: Very thin film materials have emerged as a highly interesting and useful quasi 2D-state functionality. They have given rise to numerous applications ranging from protective and smart coatings to electronics, sensors and display technology as well as serving biological, analytical and medical purposes. The tailoring of polymer film properties and functions has become a major research field. As opposed to the traditional treatise on polymer and resin-based coatings, this one-stop reference is the first to give readers a comprehensive view of the latest macromolecular and supramolecular film-based nanotechnology. Bringing together all the important facets and state-of-the-art research, the two well-structured volumes cover film assembly and depostion, functionality and patterning, and analysis and characterization. The result is an in-depth understanding of the phenomena, ordering, scale effects, fabrication, and analysis of polymer ultrathin films. This book will be a valuable addition for Materials Scientists, Polymer Chemists, Surface Scientists, Bioengineers, Coatings Specialists, Chemical Engineers, and Scientists working in this important research field and industry.
Download or read book Metal Polymer Systems written by Jörg Florian Friedrich and published by John Wiley & Sons. This book was released on 2017-12-04 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: The result of decades of research by a pioneer in the field, this is the first book to deal exclusively with achieving high-performance metal-polymer composites by chemical bonding. Covering both the academic and practical aspects, the author focuses on the chemistry of interfaces between metals and polymers with a particular emphasis on the chemical bonding between the different materials. He elucidates the various approaches to obtaining a stable interface, including, but not limited to, thermodynamically driven redox reactions, bond protection to prevent hydrolysis, the introduction of barrier layers, and stabilization by spacer molecules. Throughout, chemical bonding is promoted as a simple and economically viable alternative to adhesion based on reversible weak physical interaction. Consequently, the text equips readers with the practical tools necessary for designing high-strength metal-polymer composites with such desired properties as resilience, flexibility, rigidity or degradation resistance.
Download or read book CVD Polymers written by Karen K. Gleason and published by John Wiley & Sons. This book was released on 2015-04-01 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: The method of CVD (chemical vapor deposition) is a versatile technique to fabricate high-quality thin films and structured surfaces in the nanometer regime from the vapor phase. Already widely used for the deposition of inorganic materials in the semiconductor industry, CVD has become the method of choice in many applications to process polymers as well. This highly scalable technique allows for synthesizing high-purity, defect-free films and for systematically tuning their chemical, mechanical and physical properties. In addition, vapor phase processing is critical for the deposition of insoluble materials including fluoropolymers, electrically conductive polymers, and highly crosslinked organic networks. Furthermore, CVD enables the coating of substrates which would otherwise dissolve or swell upon exposure to solvents. The scope of the book encompasses CVD polymerization processes which directly translate the chemical mechanisms of traditional polymer synthesis and organic synthesis in homogeneous liquids into heterogeneous processes for the modification of solid surfaces. The book is structured into four parts, complemented by an introductory overview of the diverse process strategies for CVD of polymeric materials. The first part on the fundamentals of CVD polymers is followed by a detailed coverage of the materials chemistry of CVD polymers, including the main synthesis mechanisms and the resultant classes of materials. The third part focuses on the applications of these materials such as membrane modification and device fabrication. The final part discusses the potential for scale-up and commercialization of CVD polymers.
