Download or read book Plasma Diagnostics for the DIII D Divertor Upgrade written by and published by . This book was released on 1990 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt: The DIII-D tokamak is being upgraded to allow for divertor biasing, baffling, and pumping experiments. This paper gives an overview of the new diagnostics added to DIII-D as part of this Advanced Divertor Program. They include tile current monitors, fast reciprocating Langmuir probes, a fixed probe array in the divertor, fast neutral pressure gauges, and H{sub {alpha}} measurements with TV cameras and fiber optics coupled to a high resolution spectrometer. 9 refs.
Download or read book DIII D Data for Modeling the Scrape off layer Plasma written by and published by . This book was released on 1989 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt: We are in the process of assembling a database of edge and divertor plasma parameters suitable for use in benchmarking tious 2D models of the scrape-off- layer (SOL) plasma. Also, we are using the Braams B2 code to derive transport coefficients for the edge plssma. In parallel, work is starting on an upgrade to the B2 code that includes padlel current flow and EXB drifts. These efforts are directed at increasing the confidence level of models of the tokamak edge plasma so that we can predict the effect of planned upgrades to DIII-D (e.g., the Advanced Divertor Program) and the performance of next generation machines such as CIT or ITER, where initial design studies show that plasma conditions at the divertor targets can have a large impact on the lifetime and cost of the machine. This report summarizes our recent progress in characterizing the DIII-D SOL plasma and in modeling these data with the the B2 code. Section I contains a brief description of the diagnostics available for characterizing the SOL plasma. In Section II we present our measurements of the SOL parameters for H-mode plasmas. This includes data showing how the divertor plasma parameters (n{sub e}(r), T{sub e}(r), and Q(r)) vary from ohmic to L-mode to H-mode, and power balance for quasi-stationary H-mode plasmas. Section III covers divertor-target heat-flux asymmetries for double and single null operation with forward and reversed toroidal field. In Section IV we show the scaling of L-mode parameters with neutral beam power, and Section V concludes with a summary of the results obtained from the Braams B2 SOL simulation code.
Download or read book Diagnostics for Experimental Thermonuclear Fusion Reactors written by Giuseppe Gorini and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 631 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book of proceedings collects the papers presented at the Workshop on Diagnostics for ITER, held at Villa Monastero, Varenna (Italy), from August 28 to September 1, 1995. The Workshop was organised by the International School of Plasma Physics "Piero Caldirola. " Established in 1971, the ISPP has organised over fifty advanced courses and workshops on topics mainly related to plasma physics. In particular, courses and workshops on plasma diagnostics (previously held in 1975, 1978, 1982, 1986, and 1991) can be considered milestones in the history of this institution. Looking back at the proceedings of the previous meetings in Varenna, one can appreciate the rapid progress in the field of plasma diagnostics over the past 20 years. The 1995 workshop was co-organised by the Istituto di Fisica del Plasma of the National Research Council (CNR). In contrast to previous Varenna meetings on diagnostics, which have covered diagnostics in present-day tokamaks and which have had a substantial tutorial component, the 1995 workshop concentrated specifically on the problems and challenges of ITER diagnostics. ITER (the International Thennonuclear Experimental Reactor, a joint venture of Europe, Japan, Russia, and the United States, presently under design) will need to measure a wide range of plasma parameters in order to reach and sustain high levels of fusion power. A list of the measurement requirements together with the parameter ranges, target measurement resolutions, and accuracies provides the starting point for selecting a list of candidate diagnostic systems.
Download or read book Diagnostics for Experimental Thermonuclear Fusion Reactors 2 written by Peter E. Stott and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 615 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book of proceedings collects the papers presented at the workshop on "Diagnostics for Experimental Fusion Reactors" held at Villa Monastero, Varenna (Italy) September 4-12, 1997. This workshop was the seventh organized by the International School of Plasma Physics "Piero Caldirola" on the topic of plasma diagnostics and the second devoted to the diagnostic studies for the International Thermonuclear Experimental Reactor (ITER). The proceedings of the first workshop on ITER diagnostics were published by Plenum Press in 1996 with the title "Diagnostics for Experimental Thermonuclear Fusion Reactors". While many of the ideas and studies reported in the first workshop remain valid, there has been sub stantial progress in the design and specification of many diagnostics for ITER. This moti vated a second workshop on this topic and the publication of a new book of proceedings. ITER is a joint venture between Europe, Japan, Russia and USA in the field of con trolled thermonuclear fusion research. The present aim of ITER is to design an experimental fusion reactor that can demonstrate ignition and sustained burn in a magnetically confined plasma. To achieve this goal, a wide range of plasma parameters will have to be measured reliably. It is also anticipated that diagnostics will be used much more extensively as input to control systems on ITER than on present fusion devices and this will require increased relia bility and long-term stability.
Download or read book Reconstruction of Detached Divertor Plasma Conditions in DIII D Using Spectroscopic and Probe Data written by P. Stangeby and published by . This book was released on 2004 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: For some divertor aspects, such as detached plasmas or the private flux zone, it is not clear that the controlling physics has been fully identified. This is a particular concern when the details of the plasma are likely to be important in modeling the problem--for example, modeling co-deposition in detached inner divertors. An empirical method of ''reconstructing'' the plasma based on direct experimental measurements may be useful in such situations. It is shown that a detached plasma in the outer divertor leg of DIII-D can be reconstructed reasonably well using spectroscopic and probe data as input to a simple onion-skin model and the Monte Carlo hydrogenic code, EIRENE. The calculated 2D distributions of n{sub e} and T{sub e} in the detached divertor were compared with direct measurements from the divertor Thomson scattering system, a diagnostic capability unique to DIII-D.
Download or read book Advanced Diagnostics for Magnetic and Inertial Fusion written by Peter E. Stott and published by Springer Science & Business Media. This book was released on 2011-06-28 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the International Conference on Advanced Diagnostics for Magnetic and Inertial Fusion, held September 3-7, 2001 at Villa Monastero, Varenna, Italy. This volume focuses on future diagnostic requirements for fusion energy research emphasizing advanced diagnostics, new techniques and areas where further progress is required.
Download or read book Results of DIII D Operation with New Enabling Technologies written by and published by . This book was released on 1997 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent experiments on DIII-D have been carried out to understand and explore optimized tokamak operating modes by exploiting control of the plasma current and pressure profiles using new RF current drive and divertor technology. DIII-D emphasizes plasma shape and divertor experiments using a digital plasma control system and extensive diagnostics to develop improved understanding and control of transport barriers in high performance plasmas. The emphasis of the program is to extend the duration of high performance operating modes beyond the plasma current relaxation time by using ICRF and ECH current drive. Engineering features of the new RF systems being developed for these experiments as well as new divertor results are described. DIII-D employs multi-element ICRF antennas for fast-wave electron heating and on-axis current drive and is beginning 110 GHz ECH experiments with MW-level gyrotrons for off-axis current drive. DIII-D employs active cryogenic divertor neutral particle pumping for plasma density and plasma pressure profile control. A divertor modification is now being implemented on DIII-D to pump higher triangularity plasmas and to better baffle neutral backflow from the recycling divertor region.
Download or read book Valojuova written by and published by . This book was released on 1945 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Research Abstracts written by and published by . This book was released on 1995 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Developing Models for the DIII D Boundary Plasma written by and published by . This book was released on 2005 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt: Development of the comprehensive codes used to study the boundary region of the DIII-D tokamak has been done in parallel with improvement of the diagnostics of this important region of the plasma. These codes have been used to interpret the diagnostic data and assist in design of improved divertor configurations. The development of codes used for analysis on DIII-D is described briefly. Model validation by comparing with the extensive DIII-D boundary region diagnostic data is also discussed.
Download or read book Diagnostics for the DIII D Radiative Divertor written by and published by . This book was released on 1995 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper reviews the design of new diagnostics and the modifications to existing diagnostics needed to carry out radiative divertor experiments in DIII-D following installation in late 1996 of a set of baffle structures that will restrict the backflow to the core plasma of neutral deuterium atoms and impurity gases. The divertor slots formed by the new baffle structures will inhibit the easy view of the divertor legs and target plates that the open divertor geometry in DIII-D currently affords. We review a basic set of diagnostics that are needed to demonstrate the reduction of divertor heat loading and radiative dissipation of energy within the divertor. This will include IR cameras, bolometry, foil bolometers, and Langmuir probes. Within the limits of available funding, we will implement a supplemental set of instruments which provide a more detailed understanding of the underlying physical processes. Many existing diagnostics require only re-aiming to provide proper coverage of the initial 23 cm long divertor plasma configuration (X- point to floor distance). Other diagnostics need extensive reconfiguration using in-vessel fiber-optic bundles or high power laser mirrors. The new divertor baffle panels provide a protective shelf for diagnostic hardware mounted underneath them, but the water cooling channels in the panels limit the permissible size of through holes and, thereby, restrict the available views of under-the- baffle diagnostics. The successful resolution of the design and implementation of these diagnostic modifications is dependent on a strong coordination between GA and its many diagnostic collaborators.
Download or read book Collaboration on DIII D Five Year Plan written by and published by . This book was released on 2003 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document summarizes Lawrence Livermore National Laboratory's (LLNL) plan for fusion research on the DIII-D Tokamak, located at General Atomics (GA) in San Diego, California, in the time period FY04-FY08. This document is a companion document to the DIII-D Five-Year Program Plan; which hereafter will be referred to as the ''D3DPP''. The LLNL Collaboration on DIII-D is a task-driven program in which we bring to bear the full range of expertise needed to complete specific goals of plasma science research on the DIII-D facility. This document specifies our plasma performance and physics understanding goals and gives detailed plans to achieve those goals in terms of experimental leadership, code development and analysis, and diagnostic development. Our program is designed to be consistent with the long-term mission of the DIII-D program as documented in the D3DPP. The overall DIII-D Program mission is ''to establish the scientific basis for the optimization of the tokamak approach to fusion energy production''. LLNL Magnetic Fusion Energy (MFE) supports this mission, and we contribute to two areas of the DIII-D program: divertor physics and advanced tokamak (AT) physics. We lead or contribute to the whole cycle of research: experimental planning, diagnostic development, execution of experiments, and detailed analysis. We plan to continue this style in the next five years. DIII-D has identified three major research themes: AT physics, confinement physics, and mass transport. The LLNL program is part of the AT theme: measurement of the plasma current profile, and the mass transport theme: measurement and modeling of plasma flow. In the AT area, we have focused on the measurement and modeling of the current profile in Advanced Tokamak plasmas. The current profile, and it's effect on MHD stability of the high-[beta] ''AT'' plasma are at the heart of the DIII-D program. LLNL has played a key role in the development of the Motional Stark Effect (MSE) diagnostic. Starting with a single channel, the system has grown to 40 channels with three separate systems. We have continually developed new calibration techniques, with a goal of accuracy in the magnetic field pitch angle measurements of ≈0.1 degree. Measurements of the radial electric field E{sub r} have also been achieved. In the next five year period, GA plans on rotating one of the neutral beams so that it injects opposite to the sense of the plasma current (counter-injection). This enables two orthogonal MSE views of the neutral beam so that J(r) and E{sub r} can be obtained directly. In addition, the new views can be optimized so that increased spatial resolution will be obtained. Our plan is to install these new systems when the neutral beam is reoriented, and continue to provide high-resolution, ''state of the art'' current profile measurements for the DIII-D AT program. In the divertor physics area, our goal is the development of a model of the scrapeoff layer (SOL) and divertor plasmas which is benchmarked with data. We have identified the need for measurements of SOL flow and ion temperature. Working with GA, we are proposing a new edge Charge Exchange Recombination (CER) diagnostic. The understanding of SOL flow is important for understanding the tritium inventory problem in ITER. In addition, using plasma flow to ''entrain'' impurities in the divertor region (enabling a low density radiative divertor) is the current AT divertor heat flux control scenario. We are also augmenting our edge modeling capabilities with a coupled UEDGE (fluid code) with the BOUT (edge turbulence) code. Further work, funded through LLNL theory, is planned to develop a kinetic treatment of the edge. All of these efforts contribute to the understanding of the edge pedestal in the tokamak, an important AT and ITER topic. A secondary goal is the understanding of Edge Localized Modes (ELMs), which are also important in the ITER design, as the repetitive bursts of heat flux can cause increased erosion and damage to the divertor plates. The modeling effort, particularly the kinetic treatment of the pedestal region described above, is aimed at an understanding of the pedestal plasma. We plan to add fast data acquisition to several of the DIII-D edge and SOL diagnostics, e.g. the filterscopes, and imaging spectroscopic cameras, so that we can study the fast time evolution of ELMs.
Download or read book A Comprehensive 2 D Divertor Data Set from DIII D for Edge Theory Validation written by and published by . This book was released on 1996 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive set of experiments has been carried out on the DIII-D tokamak to measure the 2-D (R, Z) structure of the divertor plasma in a systematic way using new diagnostics. Measurements cover the divertor radially from inside the X-point to the outer target plate and vertically from the target plate to above the X-point. Identical, repeatable shots were made, each having radial sweeps of the X-point and divertor strike points, to allow complete plasma and radiation profile measurements. Data have been obtained in ohmic, L-mode, ELMing H-mode, and reversed B{sub T} operation ((nabla)B drift away from the X-point). In addition, complete measurements were made of radiative divertor plasmas with a Partially Detached Divertor (PDD) induced by D2 injection and with a Radiating Mantle induced by Impurity injection (RMI) using neon and nitrogen. The data set includes first observations of the radial and poloidal profiles of the X-point, inner and outer leg plasmas in PDD and RMI radiative divertor operation. Preliminary data analysis shows that intrinsic impurities play a critical role in determining the SOL and divertor conditions.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fusion Technology 1996 written by C. Varandas and published by Elsevier. This book was released on 2012-12-02 with total page 1057 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of these proceedings was to provide a platform for the exchange of information on the design, construction and operation of fusion experiments. The technology which is being developed for the next step devices and fusion reactors was also covered.
Download or read book An Overview of the DIII D Program written by and published by . This book was released on 1996 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: The DIII-D program focuses on developing fusion physics in an integrated program of tokamak concept improvement. The intent is both to support the present ITER physics R and D and to develop more efficient concepts for the later phases of ITER and eventual power plants. Progress in this effort can be best summarized by recent results for a diverted deuterium discharge with negative central shear which reached a performance level of Q{sub DT} = 0.32. The ongoing development of the tools needed to carry out this program of understanding and optimization continues to be crucial to its success. Control of the plasma cross-sectional shape and the internal distributions of plasma current, density, and rotation has been essential to optimizing plasma performance. Advanced divertor concepts provide edge power and particle control for future devices such as ITER and provide techniques to help manage the edge power and particle flows for advanced tokamak concepts. New divertor diagnostics and improved modeling are developing excellent divertor understanding. Many of the plasma physics issues being posed by ITER are being addressed. Scrapeoff layer power flow is being characterized to provide an accurate basis for the design of reactor devices. Ongoing studies of the density limit focus on identifying ways in which ITER can achieve the required densities in excess of the Greenwald limit. Better understanding of disruptions is crucial to the design of future reactors.
Download or read book Frances Wildt written by and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
