Download or read book Plasma Science and Technology for Emerging Economies written by Rajdeep Singh Rawat and published by Springer. This book was released on 2017-10-07 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights plasma science and technology-related research and development work at institutes and universities networked through Asian African Association for Plasma Training (AAAPT) which was established in 1988. The AAAPT, with 52 member institutes in 24 countries, promotes the initiation and intensification of plasma research and development through cooperation and technology sharing. With 13 chapters on fusion-relevant, laboratory and industrial plasmas for wide range of applications and basic research and a chapter on AAAPT network, it demonstrates how, with collaborations, high-quality, industrially relevant academic and scientific research on fusion, industrial and laboratory plasmas and plasma diagnostics can be successfully pursued in small research labs. These plasma sciences and technologies include pioneering breakthroughs and applications in (i) fusion relevant research in the quest for long-term, clean energy source development using high-temperature, high- density plasmas and (ii) multibillion-dollar, low-temperature, non-equilibrium and thermal industrial plasmas used in processing, synthesis and electronics.

Download or read book Plasma Technology for Biomedical Applications written by Emilio Martines and published by MDPI. This book was released on 2020-05-29 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is growing interest in the use of physical plasmas (ionized gases) for biomedical applications, especially in the framework of so-called “plasma medicine”, which exploits the action of low-power, atmospheric pressure plasmas for therapeutic purposes. Such plasmas are “cold plasmas”, in the sense that only electrons have a high temperature, whereas ions and the neutral gas particles are at or near room temperature. As a consequence, the “plasma flame” can be directly applied to living matter without appreciable thermal load. Reactive chemical species, charged particles, visible and UV radiation, and electric fields are interaction channels of the plasma with pathogens, cells, and tissues, which can trigger a variety of different responses. Possible applications include disinfection, wound healing, cancer treatment, non-thermal blood coagulation, just to mention some. The understanding of the mechanisms of plasma action on living matter requires a strongly interdisciplinary approach, with competencies ranging from plasma physics and technology to chemistry, to biology and finally to medicine. This book is a collection of work that explores recent advances in this field.

Download or read book Non Thermal Plasma Technology for Polymeric Materials written by Sabu Thomas and published by Elsevier. This book was released on 2018-10-08 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Non-Thermal Plasma Technology for Polymeric Materials: Applications in Composites, Nanostructured Materials and Biomedical Fields provides both an introduction and practical guide to plasma synthesis, modification and processing of polymers, their composites, nancomposites, blends, IPNs and gels. It examines the current state-of-the-art and new challenges in the field, including the use of plasma treatment to enhance adhesion, characterization techniques, and the environmental aspects of the process. Particular attention is paid to the effects on the final properties of composites and the characterization of fiber/polymer surface interactions. This book helps demystify the process of plasma polymerization, providing a thorough grounding in the fundamentals of plasma technology as they relate to polymers. It is ideal for materials scientists, polymer chemists, and engineers, acting as a guide to further research into new applications of this technology in the real world. - Enables materials scientists and engineers to deploy plasma technology for surface treatment, characterization and analysis of polymeric materials - Reviews the state-of-the-art in plasma technology for polymer synthesis and processing - Presents detailed coverage of the most advanced applications for plasma polymerization, particularly in medicine and biomedical engineering, areas such as implants, biosensors and tissue engineering

Download or read book Plasma Electronics written by Toshiaki Makabe and published by CRC Press. This book was released on 2006-03-27 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: Without plasma processing techniques, recent advances in microelectronics fabrication would not have been possible. But beyond simply enabling new capabilities, plasma-based techniques hold the potential to enhance and improve many processes and applications. They are viable over a wide range of size and time scales, and can be used for deposition,

Download or read book The Plasma Boundary of Magnetic Fusion Devices written by P.C Stangeby and published by CRC Press. This book was released on 2000-01-01 with total page 738 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Plasma Boundary of Magnetic Fusion Devices introduces the physics of the plasma boundary region, including plasma-surface interactions, with an emphasis on those occurring in magnetically confined fusion plasmas. The book covers plasma-surface interaction, Debye sheaths, sputtering, scrape-off layers, plasma impurities, recycling and control, 1D and 2D fluid and kinetic modeling of particle transport, plasma properties at the edge, diverter and limiter physics, and control of the plasma boundary. Divided into three parts, the book begins with Part 1, an introduction to the plasma boundary. The derivations are heuristic and worked problems help crystallize physical intuition, which is emphasized throughout. Part 2 provides an introduction to methods of modeling the plasma edge region and for interpreting computer code results. Part 3 presents a collection of essays on currently active research hot topics. With an extensive bibliography and index, this book is an invaluable first port-of-call for researchers interested in plasma-surface interactions.

Download or read book Encyclopedia of Plasma Technology Two Volume Set written by J. Leon Shohet and published by CRC Press. This book was released on 2016-12-12 with total page 1654 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technical plasmas have a wide range of industrial applications. The Encyclopedia of Plasma Technology covers all aspects of plasma technology from the fundamentals to a range of applications across a large number of industries and disciplines. Topics covered include nanotechnology, solar cell technology, biomedical and clinical applications, electronic materials, sustainability, and clean technologies. The book bridges materials science, industrial chemistry, physics, and engineering, making it a must have for researchers in industry and academia, as well as those working on application-oriented plasma technologies. Also Available Online This Taylor & Francis encyclopedia is also available through online subscription, offering a variety of extra benefits for researchers, students, and librarians, including: Citation tracking and alerts Active reference linking Saved searches and marked lists HTML and PDF format options Contact Taylor and Francis for more information or to inquire about subscription options and print/online combination packages. US: (Tel) 1.888.318.2367; (E-mail) [email protected] International: (Tel) +44 (0) 20 7017 6062; (E-mail) [email protected]

Download or read book Plasma Science and Technology written by Aamir Shahzad and published by BoD – Books on Demand. This book was released on 2022-02-23 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma science and technology (PST) is a discipline investigating fundamental transport behaviors, interaction physics, and reaction chemistry of plasma and its applications in different technologies and fields. Plasma has uses in refrigeration, biotechnology, health care, microelectronics and semiconductors, nanotechnology, space and environmental sciences, and so on. This book provides a comprehensive overview of PST, including information on different types of plasma, basic interactions of plasma with organic materials, plasma-based energy devices, low-temperature plasma for complex systems, and much more.

Download or read book Low Temperature Plasma Technology written by Paul K. Chu and published by CRC Press. This book was released on 2013-07-15 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by a team of pioneering scientists from around the world, Low Temperature Plasma Technology: Methods and Applications brings together recent technological advances and research in the rapidly growing field of low temperature plasmas. The book provides a comprehensive overview of related phenomena such as plasma bullets, plasma penetration into biofilms, discharge-mode transition of atmospheric pressure plasmas, and self-organization of microdischarges. It describes relevant technology and diagnostics, including nanosecond pulsed discharge, cavity ringdown spectroscopy, and laser-induced fluorescence measurement, and explores the increasing research on atmospheric pressure nonequilibrium plasma jets. The authors also discuss how low temperature plasmas are used in the synthesis of nanomaterials, environmental applications, the treatment of biomaterials, and plasma medicine. This book provides a balanced and thorough treatment of the core principles, novel technology and diagnostics, and state-of-the-art applications of low temperature plasmas. It is accessible to scientists and graduate students in low-pressure plasma physics, nanotechnology, plasma medicine, and materials science. The book is also suitable as an advanced reference for senior undergraduate students.

Download or read book Plasma Science and Technology written by Haikel Jelassi and published by BoD – Books on Demand. This book was released on 2019-02-27 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Usually called the "fourth state of matter," plasmas make up more than 99% of known material. In usual terminology, this term generally refers to partially or totally ionized gas and covers a large number of topics with very different characteristics and behaviors. Over the last few decades, the physics and engineering of plasmas was experiencing a renewed interest, essentially born of a series of important applications such as thin-layer deposition, surface treatment, isotopic separation, integrated circuit etchings, medicine, etc. Plasma Science

Download or read book Plasma Science written by National Academies of Sciences Engineering and Medicine and published by . This book was released on 2021-02-28 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma Science and Engineering transforms fundamental scientific research into powerful societal applications, from materials processing and healthcare to forecasting space weather. Plasma Science: Enabling Technology, Sustainability, Security and Exploration discusses the importance of plasma research, identifies important grand challenges for the next decade, and makes recommendations on funding and workforce. This publication will help federal agencies, policymakers, and academic leadership understand the importance of plasma research and make informed decisions about plasma science funding, workforce, and research directions.

Download or read book Cold Plasma Cancer Therapy written by Michael Keidar and published by Morgan & Claypool Publishers. This book was released on 2019-04-01 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cold atmospheric plasma (CAP) emerges as a possible new modality for cancer treatment. This book provides a comprehensive introduction into fundamentals of the CAP and plasma devices used in plasma medicine. An analysis of the mechanisms of plasma interaction with cancer and normal cells including description of possible mechanisms of plasma selectivity is included. Recent advances in the field, the primary challenges and future directions are presented.

Download or read book Comprehensive Clinical Plasma Medicine written by Hans-Robert Metelmann and published by Springer. This book was released on 2018-05-04 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the state of the art in clinical plasma medicine and outlines translational research strategies. Written by an international group of authors, it is divided into four parts. Part I is a detailed introduction and includes basic and recent research information on plasma sciences, plasma devices and mechanisms of biological plasma effects. Parts II and III provide valuable clinical insights f.e. into the treatment of superficial contaminations, ulcerations, wounds, treatment of cells in cancer, special indications like in heart surgery, dentistry, palliative treatment in head and neck cancer or the use of plasma in hygiene. Part IV offers information on how and where to qualify in plasma medicine and which companies produce and supply medical devices and is thus of particular interest to medical practitioners. This comprehensive book offers a sciences based practical to the clinical use of plasma and includes an extended selection of scientific medical data and translational literature.

Download or read book Non Thermal Plasma Techniques for Pollution Control written by Bernie M. Penetrante and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Acid rain, global warming, ozone depletion, and smog are preeminent environmental problems facing the world today. Non-thermal plasma techniques offer an innovative approach to the solution of some of these problems. There are many types of non-thermal plasma devices that have been developed for environmental applications. The potential of these devices for the destruction of pollutants or toxic molecules has already been demonstrated in many contexts, such as nitrogen oxides (NOX) and sulfur dioxide (SO2) in flue gases, heavy metals and volatile organic compounds (VOCs) in industrial effluents, and chemical agents such as nerve gases. This book contains a comprehensive account of the latest developments in non-thermal plasma devices and their applications to the disposal of a wide variety of gaseous pollutants.

Download or read book Nonequilibrium Atmospheric Pressure Plasma Jets written by XinPei Lu and published by CRC Press. This book was released on 2019-04-23 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonequilibrium atmospheric pressure plasma jets (N-APPJs) generate plasma in open space rather than in a confined chamber and can be utilized for applications in medicine. This book provides a complete introduction to this fast-emerging field, from the fundamental physics, to experimental approaches, to plasma and reactive species diagnostics. It provides an overview of the development of a wide range of plasma jet devices and their fundamental mechanisms. The book concludes with a discussion of the exciting application of plasmas for cancer treatment. The book provides details on experimental methods including expert tips and caveats. covers novel devices driven by various power sources and the impact of operating conditions on concentrations and fluxes of the reactive species. discusses the latest advances including theory, modeling, and simulation approaches. gives an introduction, overview and details on state of the art diagnostics of small scale high gradient atmospheric pressure plasmas. covers the use of N-APPJs for cancer applications, including discussion of destruction of cancer cells, mechanisms of action, and selectivity studies. XinPei Lu is a Chair Professor in the School of Electrical and Electronic Engineering at Huazhong University of Science and Technology. Stephan Reuter is currently Visiting Professor at Université Paris-Saclay. In a recent Alexander von Humboldt research fellowship at Princeton University, he performed ultrafast laser spectroscopy on cold plasmas. Mounir Laroussi is Professor of Electrical and Computer Engineering and director of the Plasma Engineering and Medicine Institute at Old Dominion University. He is a Fellow of IEEE and recipient of an IEEE Merit Award. DaWei Liu is Professor in the School of Electrical and Electronic Engineering at Huazhong University of Science and Technology.

Download or read book Textbook of Good Clinical Practice in Cold Plasma Therapy written by Hans-Robert Metelmann and published by Springer Nature. This book was released on 2022-02-25 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook addresses the growing international need for a practical manual that teaches physicians how to apply cold atmospheric pressure plasma (CAP) in the day‐to‐day provision of patient healthcare. The book introduces readers to the concept of CAP, how it works, and how safe it is, before describing several diseases and other medical indications for its application. The book subsequently provides guidelines for daily clinical practice, e.g. for treating chronic wounds, decontaminating infected skin lesions, and rendering multi-resistant bacteria inert, as well as a detailed overview of plasma devices. In closing, it addresses organizational aspects, which are essential to cultivating and maintaining quality standards in the application of cold medical plasma. This textbook offers a unique educational resource and provides relevant information on plasma medicine as an emerging multidisciplinary discipline. Practitioners will appreciate this integrated, comprehensive guide, which is also suitable for advanced students of medicine and dentistry, and for nurses serving on plasma-assisted medical teams.

Download or read book Plasma and Fusion Science written by B. Raneesh and published by CRC Press. This book was released on 2018-01-03 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this new book, an interdisciplinary and international team of experts provides an exploration of the emerging plasma science that is poised to make the plasma technology a reality in the manufacturing sector. The research presented here will stimulate new ideas, methods, and applications in the field of plasma science and nanotechnology. Plasma technology applications are being developed that could impact the global market for power, electronics, mineral, and other fuel commodities. Currently, plasma science is described as a revolutionary discipline in terms of its possible impact on industrial applications. It offers potential solutions to many problems using emerging techniques. In this book the authors provide a broad overview of recent trends in field plasma science and nanotechnology. Divided into several parts, Plasma and Fusion Science: From Fundamental Research to Technological Applications explores some basic plasma applications and research, space and atmospheric plasma, nuclear fusion, and laser plasma and industrial applications of plasma. A wide variety of cutting-edge topics are covered, including: • basic plasma physics • computer modeling for plasma • exotic plasma (including dusty plasma) • industrial plasma applications • laser plasma • nuclear fusion technology • plasma diagnostics • plasma processing • pulsed power • space astrophysical plasma • plasma and nanotechnology Pointing to current and possible future developments in plasma science and technology, the diverse research presented here will be valuable for researchers, scientists, industry professionals, and others involved in the revolutionary field of plasma and fusion science.

Download or read book P Z written by Library of Congress. Office for Subject Cataloging Policy and published by . This book was released on 1990 with total page 1644 pages. Available in PDF, EPUB and Kindle. Book excerpt: