Download or read book Plasma Deposited Thin Films written by Mort and published by CRC Press. This book was released on 2018-05-04 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: In Summary, the objective of this book is to present in one volume a review of the plasma deposition process and the present understanding of the most important and widely used plasma deposited thin film materials, devices and their applications.
Download or read book Film Deposition by Plasma Techniques written by Mitsuharu Konuma and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Properties of thin films depend strongly upon the deposition technique and conditions chosen. In order to achieve the desired film, optimum deposition conditions have to be found by carrying out experiments in a trial-and error fashion with varying parameters. The data obtained on one growth apparatus are often not transferable to another. This is especially true for film deposition processes using a cold plasma because of our poor under standing of the mechanisms. Relatively precise studies have been carried out on the role that physical effects play in film formation such as sputter deposition. However, there are many open questions regarding processes that involve chemical reactions, for example, reactive sputter deposition or plasma enhanced chemical vapor deposition. Much further research is re quired in order to understand the fundamental deposition processes. A sys tematic collection of basic data, some of which may be readily available in other branches of science, for example, reaction cross sections for gases with energetic electrons, is also required. The need for pfasma deposition techniques is felt strongly in industrial applications because these techniques are superior to traditional thin-film deposition techniques in many ways. In fact, plasma deposition techniques have developed rapidly in the semiconductor and electronics industries. Fields of possible application are still expanding. A reliable plasma reactor with an adequate in situ system for monitoring the deposition conditions and film properties must be developed to improve reproducibility and pro ductivity at the industrial level.
Download or read book Plasma Polymer Films written by Hynek Biederman and published by World Scientific. This book was released on 2004 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma Polymer Films examines the current status of the deposition and characterization of fluorocarbon-, hydrocarbon- and silicon-containing plasma polymer films and nanocomposites, with plasma polymer matrix. It introduces plasma polymerization process diagnostics such as optical emission spectroscopy (OES, AOES), and describes special deposition techniques such as atmospheric pressure glow discharge. Important issues for applications such as degradation and stability are treated in detail, and structural characterization, basic electrical and optical properties and biomedical applications are discussed.
Download or read book Thin Films by Chemical Vapour Deposition written by C.E. Morosanu and published by Elsevier. This book was released on 2016-06-22 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: The explosive growth in the semiconductor industry has caused a rapid evolution of thin film materials that lend themselves to the fabrication of state-of-the-art semiconductor devices. Early in the 1960s an old research technique named chemical vapour phase deposition (CVD), which has several unique advantages, developed into the most widely used technique for thin film preparation in electronics technology. In the last 25 years, tremendous advances have been made in the science and technology of thin films prepared by means of CVD. This book presents in a single volume, an up-to-date overview of the important field of CVD processes which has never been completely reviewed previously. Contents: Part I. 1. Evolution of CVD Films. Introductory remarks. Short history of CVD thin films. II. Fundamentals. 2. Techniques of Preparing Thin Films. Electrolytic deposition techniques. Vacuum deposition techniques. Plasma deposition techniques. Liquid-phase deposition techniques. Solid-phase deposition techniques. Chemical vapour conversion of substrate. Chemical vapour deposition. Comparison between CVD and other thin film deposition techniques. 3. Chemical Processes Used in CVD. Introduction. Description of chemical reactions used in CVD. 4. Thermodynamics of CVD. Feasibility of a CVD process. Techniques for equilibrium calculations in CVD systems. Examples of thermodynamic studies of CVD systems. 5. Kinetics of CVD. Steps and control type of a CVD heterogeneous reaction. Influence of experimental parameters on thin film deposition rate. Continuous measurement of the deposition rate. Experimental methods for studying CVD kinetics. Role of homogeneous reactions in CVD. Mechanism of CVD processes. Kinetics and mechanism of dopant incorporation. Transport phenomena in CVD. Status of kinetic and mechanism investigations in CVD systems. 6. Measurement of Thin Film Thickness. Mechanical methods. Mechanical-optical methods. Optical methods. Electrical methods. Miscellaneous methods. 7. Nucleation and Growth of CVD Films. Stages in the nucleation and growth mechanism. Regimes of nucleation and growth. Nucleation theory. Dependence of nucleation on deposition parameters. Heterogeneous nucleation and CVD film structural forms. Homogeneous nucleation. Experimental techniques. Experimental results of CVD film nucleation. 8. Thin Film Structure. Techniques for studying thin film structure. Structural defects in CVD thin films. 9. Analysis of CVD Films. Analysis techniques of thin film bulk. Analysis techniques of thin film surfaces. Film composition measurement. Depth concentration profiling. 10. Properties of CVD Films. Mechanical properties. Thermal properties. Optical properties. Photoelectric properties. Electrical properties. Magnetic properties. Chemical properties. Part III. 11. Equipment and Substrates. Equipment for CVD. Safety in CVD. Substrates. 12. Preparation and Properties of Semiconducting Thin Films. Homoepitaxial semiconducting films. Heteroepitaxial semiconducting films. 13. Preparation and Properties of Amorphous Insulating Thin Films. Oxides. Nitrides and Oxynitrides. Polymeric thin films. 14. Preparation and Properties of Conductive Thin Films. Metals and metal alloys. Resistor materials. Transparent conducting films. Miscellaneous materials. 15. Preparation and Properties of Superconducting and Magnetic Thin Films. Superconducting materials. Magnetic materials. 16. Uses of CVD Thin Films. Applications in electronics and microelectronics. Applications in the field of microwaves and optoelectronics. Miscellaneous applications. Artificial heterostructures (Quantum wells, superlattices, monolayers, two-dimensional electron gases). Part V. 17. Present and Future Importance of CVD Films.
Download or read book Principles of Vapor Deposition of Thin Films written by Professor K.S. K.S Sree Harsha and published by Elsevier. This book was released on 2005-12-16 with total page 1173 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal of producing devices that are smaller, faster, more functional, reproducible, reliable and economical has given thin film processing a unique role in technology. Principles of Vapor Deposition of Thin Films brings in to one place a diverse amount of scientific background that is considered essential to become knowledgeable in thin film depostition techniques. Its ultimate goal as a reference is to provide the foundation upon which thin film science and technological innovation are possible. * Offers detailed derivation of important formulae. * Thoroughly covers the basic principles of materials science that are important to any thin film preparation. * Careful attention to terminologies, concepts and definitions, as well as abundance of illustrations offer clear support for the text.
Download or read book The Materials Science of Thin Films written by Milton Ohring and published by Academic Press. This book was released on 1992 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared as a textbook complete with problems after each chapter, specifically intended for classroom use in universities.
Download or read book A Study of Reactive Plasma Deposited Thin Films written by and published by . This book was released on 1986 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plasma Sources for Thin Film Deposition and Etching written by Maurice H. Francombe and published by Academic Press. This book was released on 2013-10-22 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: This latest volume of the well-known Physics of Thin Films Series includes four chapters that discuss high-density plasma sources for materials processing, electron cyclotron resonance and its uses, unbalancedmagnetron sputtering, and particle formation in thin film processing plasma. Chapter One develops a unified framework from which all "high-efficiency" sources may be viewed and compared; outlines key elements of source design affecting processing results; and highlights areas where additional research and development are needed Chapter Two reviews and analyzes the main types of electron cyclotron resonance (ECR) plasma sources suitable for ECR PACVD of thin films, mainly ECR sources using magnet coils Chapter Three examines the benefits and limitations of the new technique, unbalanced magnetron sputtering (UBM), along with the motivation for its development, the basic principles of its operation and commercial applications, and some speculations regarding the future of UBM technology Chapter Four describes general phenomena observed in connection with particle formation in thin film processing plasmas; discusses particles in PECVD plasmas, sputtering plasmas, and RIE plasmas; presents an overview of the theoretical modeling of various aspects of particles in processing plasmas; examines issues of equipment design affecting particle formation; and concludes with remarks about the implications of this work for the control of process-induced particle contamination
Download or read book Handbook of Deposition Technologies for Films and Coatings written by Peter M. Martin and published by William Andrew. This book was released on 2009-12-01 with total page 932 pages. Available in PDF, EPUB and Kindle. Book excerpt: This 3e, edited by Peter M. Martin, PNNL 2005 Inventor of the Year, is an extensive update of the many improvements in deposition technologies, mechanisms, and applications. This long-awaited revision includes updated and new chapters on atomic layer deposition, cathodic arc deposition, sculpted thin films, polymer thin films and emerging technologies. Extensive material was added throughout the book, especially in the areas concerned with plasma-assisted vapor deposition processes and metallurgical coating applications.
Download or read book Plasma Deposition Treatment and Etching of Polymers written by Riccardo d'Agostino and published by Elsevier. This book was released on 2012-12-02 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma Deposition, Treatment, and Etching of Polymers takes a broad look at the basic principles, the chemical processes, and the diagnostic procedures in the interaction of plasmas with polymer surfaces. This recent technology has yielded a large class of new materials offering many applications, including their use as coatings for chemical fibers and films. Additional applications include uses for the passivation of metals, the surface hardening of tools, increased biocompatibility of biomedical materials, chemical and physical sensors, and a variety of micro- and optoelectronic devices. Appeals to a broad range of industries from microelectronics to space technology Discusses a wide array of new uses for plasma polymers Provides a tutorial introduction to the field Surveys various classes of plasma polymers, their chemical and morphological properties, effects of plasma process parameters on the growth and structure of these synthetic materials, and techniques for characterization Interests scientists, engineers, and students alike
Download or read book Plasma Sources for Thin Film Deposition and Etching written by Maurice H. Francombe and published by Academic Press. This book was released on 1994-08-18 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This latest volume of the well-known Physics of Thin Films Series includes four chapters that discuss high-density plasma sources for materials processing, electron cyclotron resonance and its uses, unbalancedmagnetron sputtering, and particle formation in thin film processing plasma.
Download or read book Chemical Physics of Thin Film Deposition Processes for Micro and Nano Technologies written by Y. Pauleau and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: An up-to-date collection of tutorial papers on the latest advances in the deposition and growth of thin films for micro and nano technologies. The emphasis is on fundamental aspects, principles and applications of deposition techniques used for the fabrication of micro and nano devices. The deposition of thin films is described, emphasising the gas phase and surface chemistry and its effects on the growth rates and properties of films. Gas-phase phenomena, surface chemistry, growth mechanisms and the modelling of deposition processes are thoroughly described and discussed to provide a clear understanding of the growth of thin films and microstructures via thermally activated, laser induced, photon assisted, ion beam assisted, and plasma enhanced vapour deposition processes. A handbook for engineers and scientists and an introduction for students of microelectronics.
Download or read book Flat Panel Display Manufacturing written by Jun Souk and published by John Wiley & Sons. This book was released on 2018-07-23 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: An extensive introduction to the engineering and manufacture of current and next-generation flat panel displays This book provides a broad overview of the manufacturing of flat panel displays, with a particular emphasis on the display systems at the forefront of the current mobile device revolution. It is structured to cover a broad spectrum of topics within the unifying theme of display systems manufacturing. An important theme of this book is treating displays as systems, which expands the scope beyond the technologies and manufacturing of traditional display panels (LCD and OLED) to also include key components for mobile device applications, such as flexible OLED, thin LCD backlights, as well as the manufacturing of display module assemblies. Flat Panel Display Manufacturing fills an important gap in the current book literature describing the state of the art in display manufacturing for today's displays, and looks to create a reference the development of next generation displays. The editorial team brings a broad and deep perspective on flat panel display manufacturing, with a global view spanning decades of experience at leading institutions in Japan, Korea, Taiwan, and the USA, and including direct pioneering contributions to the development of displays. The book includes a total of 24 chapters contributed by experts at leading manufacturing institutions from the global FPD industry in Korea, Japan, Taiwan, Germany, Israel, and USA. Provides an overview of the evolution of display technologies and manufacturing Treats display products as systems with manifold applications, expanding the scope beyond traditional display panel manufacturing to key components for mobile devices and TV applications Provides a detailed overview of LCD manufacturing, including panel architectures, process flows, and module manufacturing Provides a detailed overview of OLED manufacturing for both mobile and TV applications, including a chapter dedicated to the young field of flexible OLED manufacturing Provides a detailed overview of the key unit processes and corresponding manufacturing equipment, including manufacturing test & repair of TFT array panels as well as display module inspection & repair Introduces key topics in display manufacturing science and engineering, including productivity & quality, factory architectures, and green manufacturing Flat Panel Display Manufacturing will appeal to professionals and engineers in R&D departments for display-related technology development, as well as to graduates and Ph.D. students specializing in LCD/OLED/other flat panel displays.
Download or read book Plasma Deposition of Polymeric Thin Films written by Michael J. Danilich and published by . This book was released on 1994 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plasma Deposited Inorganic Thin Films for Optical Applications written by JVR Heberlein and published by . This book was released on 1985 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma deposited thin films, widely used in semiconductor processing, have begun to be used in optical applications such as anti-reflective coatings and optical waveguides. Amorphous films of refractory materials such as SiO2, SiC, and Si3N4 have been applied with high optical perfection on substrates at 200--300°C with this process. Control of index of refraction has been achieved by selecting appropriate deposition parameters.
Download or read book Atmospheric Pressure Plasma written by Anton Nikiforov and published by BoD – Books on Demand. This book was released on 2019-04-24 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma as the fourth state of matter is an ionized gas consisting of both negative and positive ions, electrons, neutral atoms, radicals, and photons. In the last few decades, atmospheric-pressure plasmas have started to attract increasing attention from both scientists and industry due to a variety of potential applications. Because of increasing interest in the topic, the focus of this book is on providing engineers and scientists with a fundamental understanding of the physical and chemical properties of different atmospheric-pressure plasmas via plasma diagnostic techniques and their applications. The book has been organized into two parts. Part I focuses on the latest achievements in advanced diagnostics of different atmospheric-pressure plasmas. Part II deals with applications of different atmospheric-pressure plasmas.
Download or read book Fluoropolymers 1 written by Gareth G. Hougham and published by Springer Science & Business Media. This book was released on 2006-04-11 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fluorine atom, by virtue of its electronegativity, size, and bond strength with carbon, can be used to create compounds with remarkable properties. Small molecules containing fluorine have many positive impacts on everyday life of which blood substitutes, pharmaceuticals, and surface modifiers are only a few examples. Fluoropolymers, too, while traditionally associated with extreme hi- performance applications have found their way into our homes, our clothing, and even our language. A recent American president was often likened to the tribology of PTFE. Since the serendipitous discovery of Teflon at the Dupont Jackson Laboratory in 1938, fluoropolymers have grown steadily in technological and marketplace importance. New synthetic fluorine chemistry, new processes, and new apprec- tion of the mechanisms by which fluorine imparts exceptional properties all contribute to accelerating growth in fluoropolymers. There are many stories of harrowing close calls in the fluorine chemistry lab, especially from the early years, and synthetic challenges at times remain daunting. But, fortunately, modern techniques and facilities have enabled significant strides toward taming both the hazards and synthetic uncertainties. In contrast to past environmental problems associated with fluorocarbon refrigerants, the exceptional properties of fluorine in polymers have great environmental value. Some fluoropolymers are enabling green technologies such as hydrogen fuel cells for automobiles and oxygen-selective membranes for cleaner diesel combustion.
