Download or read book Plasma Chemistry written by Alexander Fridman and published by Cambridge University Press. This book was released on 2008-05-05 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a fundamental introduction to all aspects of modern plasma chemistry, this book describes mechanisms and kinetics of chemical processes in plasma, plasma statistics, thermodynamics, fluid mechanics and electrodynamics, as well as all major electric discharges applied in plasma chemistry. Fridman considers most of the major applications of plasma chemistry, from electronics to thermal coatings, from treatment of polymers to fuel conversion and hydrogen production and from plasma metallurgy to plasma medicine. It is helpful to engineers, scientists and students interested in plasma physics, plasma chemistry, plasma engineering and combustion, as well as chemical physics, lasers, energy systems and environmental control. The book contains an extensive database on plasma kinetics and thermodynamics and numerical formulas for practical calculations related to specific plasma-chemical processes and applications. Problems and concept questions are provided, helpful in courses related to plasma, lasers, combustion, chemical kinetics, statistics and thermodynamics, and high-temperature and high-energy fluid mechanics.
Download or read book Plasma Chemistry 2 Plasma Chemistry and Transport Phenomena in Thermal Plasmas written by A. T. Bell and published by Elsevier. This book was released on 2017-08-31 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma Chemistry - 2: Plasma Chemistry and Transport Phenomena in Thermal Plasmas presents the proceeding of the Second International Symposium on Plasma Chemistry, held in Rome, Italy, on September 18–23, 1975. This book discusses the thermodynamic state of chemically reacting plasmas, which are generally described by Pauli or Boltzmann kinetic equations. Organized into eight chapters, this compilation of papers begins with an overview of the influence of the plasma state by a superimposed laser radiation field. This text then examines the mechanisms of chemical transformations in electric discharges. Other chapters consider the successful exploitation of thermal plasmas in the field of high temperature chemistry. This book discusses as well the status of plasma processes involving mass transfer and heat, with reference to the processes of condensation, vaporization, and chemical reaction. The final chapter deals with plasma heating and spraying of various materials. This book is a valuable resource for chemists, metallurgists, and scientists.
Download or read book Plasma Chemistry II written by S. Veprek and published by . This book was released on 2014-01-15 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nonthermal Plasma Chemistry and Physics written by Jurgen Meichsner and published by CRC Press. This book was released on 2012-11-13 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: In addition to introducing the basics of plasma physics, Nonthermal Plasma Chemistry and Physics is a comprehensive presentation of recent developments in the rapidly growing field of nonthermal plasma chemistry. The book offers a detailed discussion of the fundamentals of plasma chemical reactions and modeling, nonthermal plasma sources, relevant
Download or read book Plasma Chemistry and Catalysis in Gases and Liquids written by Vasile I. Parvulescu and published by John Wiley & Sons. This book was released on 2012-07-10 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: Filling the gap for a book that covers not only plasma in gases but also in liquids, this is all set to become the standard reference for this topic. It provides a broad-based overview of plasma-chemical and plasmacatalytic processes generated by electrical discharges in gases, liquids and gas/liquid environments in both fundamental and applied aspects by focusing on their environmental and green applications and also taking into account their practical and economic viability. With the topics addressed by an international group of major experts, this is a must-have for scientists, engineers, students and postdoctoral researchers specializing in this field.
Download or read book The Plasma Chemistry of Polymer Surfaces written by Jörg Friedrich and published by John Wiley & Sons. This book was released on 2012-05-29 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: More than 99% of all visible matter in the universe occurs as highly ionized gas plasma with high energy content. Electrical low- and atmospheric-pressure plasmas are characterized by continuous source of moderate quantities of energy or enthalpy transferred predominantly as kinetic energy of electrons. Therefore, such energetically unbalanced plasmas have low gas temperature but produce sufficient energy for inelastic collisions with atoms and molecules in the gas phase, thus producing reactive species and photons, which are able to initiate all types of polymerizations or activate any surface of low reactive polymers. However, the broadly distributed energies in the plasma exceed partially the binding energies in polymers, thus initiating very often unselective reactions and polymer degradation. The intention of this book is to present new plasma processes and new plasma reactions of high selectivity and high yield. This book aims to bridge classical and plasma chemistry, particularly focusing on polymer chemistry in the bulk and on the surface under plasma exposure. The stability of surface functionalization and the qualitative and quantitative measurement of functional groups at polymer surface are featured prominently, and chemical pathways for suppressing the undesirable side effects of plasma exposure are proposed and illustrated with numerous examples. Special attention is paid to the smooth transition from inanimate polymer surfaces to modified bioactive polymer surfaces. A wide range of techniques, plasma types and applications are demonstrated.
Download or read book Plasma Chemistry 2 written by A.T. Bell and published by . This book was released on 1976 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamental Aspects of Plasma Chemical Physics written by Mario Capitelli and published by Springer Science & Business Media. This book was released on 2015-11-26 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describing non-equilibrium "cold" plasmas through a chemical physics approach, this book uses the state-to-state plasma kinetics, which considers each internal state as a new species with its own cross sections. Extended atomic and molecular master equations are coupled with Boltzmann and Monte Carlo methods to solve the electron energy distribution function. Selected examples in different applied fields, such as microelectronics, fusion, and aerospace, are presented and discussed including the self-consistent kinetics in RF parallel plate reactors, the optimization of negative ion sources and the expansion of high enthalpy flows through nozzles of different geometries. The book will cover the main aspects of the state-to-state kinetic approach for the description of nonequilibrium cold plasmas, illustrating the more recent achievements in the development of kinetic models including the self-consistent coupling of master equations and Boltzmann equation for electron dynamics. To give a complete portrayal, the book will assess fundamental concepts and theoretical formulations, based on a unified methodological approach, and explore the insight in related scientific problems still opened for the research community.
Download or read book Plasma Chemistry and Gas Conversion written by Nikolay Britun and published by BoD – Books on Demand. This book was released on 2018-12-19 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: Low-temperature non-equilibrium gaseous discharges represent nearly ideal media for boosting plasma-based chemical reactions. In these discharges the energy of plasma electrons, after being received from the electromagnetic field, is transferred to the other degrees of freedom differently, ideally with only a small part going to the translational motion of heavy gas particles. This unique property enables the important application of non-equilibrium plasmas for greenhouse gas conversion. While the degree of discharge non-equilibrium often defines the energetic efficiency of conversion, other factors are also of a great importance, such as type of discharge, presence of plasma catalysis, etc. This book is focused on the recent achievements in optimization and understanding of non-equilibrium plasma for gas conversion via plasma modeling and experimental work.
Download or read book Plasma chemistry written by and published by . This book was released on 1980 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plasma Catalysis written by Annemie Bogaerts and published by MDPI. This book was released on 2019-04-02 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma catalysis is gaining increasing interest for various gas conversion applications, such as CO2 conversion into value-added chemicals and fuels, N2 fixation for the synthesis of NH3 or NOx, methane conversion into higher hydrocarbons or oxygenates. It is also widely used for air pollution control (e.g., VOC remediation). Plasma catalysis allows thermodynamically difficult reactions to proceed at ambient pressure and temperature, due to activation of the gas molecules by energetic electrons created in the plasma. However, plasma is very reactive but not selective, and thus a catalyst is needed to improve the selectivity. In spite of the growing interest in plasma catalysis, the underlying mechanisms of the (possible) synergy between plasma and catalyst are not yet fully understood. Indeed, plasma catalysis is quite complicated, as the plasma will affect the catalyst and vice versa. Moreover, due to the reactive plasma environment, the most suitable catalysts will probably be different from thermal catalysts. More research is needed to better understand the plasma–catalyst interactions, in order to further improve the applications.
Download or read book Proceedings of the Symposium on Plasma Processing written by and published by . This book was released on 1992 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plasma Processing of Materials written by National Research Council and published by National Academies Press. This book was released on 1991-02-01 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma processing of materials is a critical technology to several of the largest manufacturing industries in the worldâ€"electronics, aerospace, automotive, steel, biomedical, and toxic waste management. This book describes the relationship between plasma processes and the many industrial applications, examines in detail plasma processing in the electronics industry, highlights the scientific foundation underlying this technology, and discusses education issues in this multidisciplinary field. The committee recommends a coordinated, focused, and well-funded research program in this area that involves the university, federal laboratory, and industrial sectors of the community. It also points out that because plasma processing is an integral part of the infrastructure of so many American industries, it is important for both the economy and the national security that America maintain a strong leadership role in this technology.
Download or read book Reviews of Plasma Chemistry written by B.M. Smirnov and published by Springer. This book was released on 1994 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: The current volume includes articles on the elementary processes in nonsymmetric collisions of inert gas atoms, the parameters of gaseous dimers, and the physical properties of strongly coupled plasmas.
Download or read book Lecture Notes on Principles of Plasma Processing written by Francis F. Chen and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma processing of semiconductors is an interdisciplinary field requiring knowledge of both plasma physics and chemical engineering. The two authors are experts in each of these fields, and their collaboration results in the merging of these fields with a common terminology. Basic plasma concepts are introduced painlessly to those who have studied undergraduate electromagnetics but have had no previous exposure to plasmas. Unnecessarily detailed derivations are omitted; yet the reader is led to understand in some depth those concepts, such as the structure of sheaths, that are important in the design and operation of plasma processing reactors. Physicists not accustomed to low-temperature plasmas are introduced to chemical kinetics, surface science, and molecular spectroscopy. The material has been condensed to suit a nine-week graduate course, but it is sufficient to bring the reader up to date on current problems such as copper interconnects, low-k and high-k dielectrics, and oxide damage. Students will appreciate the web-style layout with ample color illustrations opposite the text, with ample room for notes. This short book is ideal for new workers in the semiconductor industry who want to be brought up to speed with minimum effort. It is also suitable for Chemical Engineering students studying plasma processing of materials; Engineers, physicists, and technicians entering the semiconductor industry who want a quick overview of the use of plasmas in the industry.
Download or read book Plasma Chemistry 2 Plasma Chemistry and Transport Phenomena in Thermal Plasma written by and published by . This book was released on 1975 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plasma Physics and Engineering written by Alexander Fridman and published by CRC Press. This book was released on 2004-04-15 with total page 888 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma engineering is a rapidly expanding area of science and technology with increasing numbers of engineers using plasma processes over a wide range of applications. An essential tool for understanding this dynamic field, Plasma Physics and Engineering provides a clear, fundamental introduction to virtually all aspects of modern plasma science and technology, including plasma chemistry and engineering, combustion, chemical physics, lasers, electronics, methods of material treatment, fuel conversion, and environmental control. The book contains an extensive database on plasma kinetics and thermodynamics, many helpful numerical formulas for practical calculations, and an array of problems and concept questions.
