Download or read book Planting Density Effects on Lint Yield and Quality of Three Stacked Gene Cotton Cultivars written by Shane William Halfmann and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The increased cost of planting transgenic or stacked gene cotton cultivars has stimulated interest in determining the optimal planting density for commercial production. If seeding rates can be reduced without adversely affecting lint yield and fiber quality, producers could regulate initial inputs by fluctuating seeding rates. However, manipulating plant density per unit area can affect the growth and development of the crop. This altered growth throughout the season could potentially affect fiber quality. Fiber properties, which dictate price discounts, are determined by maturity, diameter and length, as well as by physiological activity at the cellular level. These fiber properties are also affected by genetics and environmental conditions, which ultimately can impact lint production as well as the location of bolls set throughout theplant and the maturation period. The objective of this study was to examine the impact of plant density (including high, ideal and low densities) on growth and development of transgenic cotton cultivars. Field experiments were conducted in 2003 and 2004 at the Texas Agricultural Experiment Station in Burleson County, Texas to assess the effects of plant density on lint yield and fiber quality. Experimental design was a spit-plot design with four replications of three cultivars (SG 215 BG/RR, DP 555 BG/RR, ST 4892BG/RR) in densities ranging from 74 to 222 thousand plants hectare−1. Plant density had no significant effect on lint yield in 2003 or 2004. However, low plant density treatments contained significantly more bolls plant−1 as a result of the plant's compensatory ability to produce the same number of bolls in a given area. These low density treatments also produced more vegetative biomass plant−1. Due to lower boll numbers and lower ginout percentage, ST 4892 produced the lowest lint yield each year. Lint quality was not significantly affected by density or cultivar treatments either year. However, in 2003 micronaire values were within the discount ranges for ST 4892, and the two lowest density treatments.
Download or read book Effects of Planting Dates and Cultivars on Cotton Yield Lint Percentage and Fiber Quality written by Wilbur Aguillard and published by . This book was released on 1980 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Effect of Plant Density on the Growth Yield and Quality of Upland Cotton written by Hamid Osman Burhan and published by . This book was released on 1964 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Evaluation of the Genetic Gain in Upland Cotton During the Twentieth Century written by Brian Matthew Schwartz and published by . This book was released on 2007 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Genetic gain studies in the past have been used to evaluate the historical improvement of different traits and give insight into what magnitudes of gain might be possible in the future. Additionally, they have been carried out to defend the role of genetics during periods of stagnant or decreasing yield trends. This study was conducted over a 2-year period (2003 and 2004) and included nine current or obsolete cotton (Gossypium hirsutum L.) cultivars grown in 5 plant densities designed to evaluate varying levels of interplant competition. Plant densities were single plant culture with plants spaced 3m x 3m, 2m x 2m, 1m x 1m, 1m x 0.3m, and two commercial populations with plants spaced 1m x 0.1m. Results were analyzed for each trait to determine whether genetic gains are interrelated with tolerance to interplant competition or strictly under genetic control. The rates of genetic gain for lint yield were highest in the 1m x 0.1m, 1m x 0.3m, and 1m x 1m treatment with slopes of 8.7, 8.2, and 7.1 kg ha−1 yr−1 respectively. The slopes were each significantly smaller in the 2m x 2m and 3m x 3m spaced populations with gains of 3.6 and 1.5 kg ha−1 yr−1 respectively, implying that for lint yield, genetic gains have been made for tolerance to interplant competition. Similarly, modern maize hybrids only out perform obsolete hybrids at higher plant densities. Genetic gain for lint yield, fiber length, fiber strength, and fiber micronaire made in the context of tolerance to interplant competition is due in large part to the excellent performance of Deltapine 491 (2002) at higher plant populations.
Download or read book Genetically Engineered Crops written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2017-01-28 with total page 607 pages. Available in PDF, EPUB and Kindle. Book excerpt: Genetically engineered (GE) crops were first introduced commercially in the 1990s. After two decades of production, some groups and individuals remain critical of the technology based on their concerns about possible adverse effects on human health, the environment, and ethical considerations. At the same time, others are concerned that the technology is not reaching its potential to improve human health and the environment because of stringent regulations and reduced public funding to develop products offering more benefits to society. While the debate about these and other questions related to the genetic engineering techniques of the first 20 years goes on, emerging genetic-engineering technologies are adding new complexities to the conversation. Genetically Engineered Crops builds on previous related Academies reports published between 1987 and 2010 by undertaking a retrospective examination of the purported positive and adverse effects of GE crops and to anticipate what emerging genetic-engineering technologies hold for the future. This report indicates where there are uncertainties about the economic, agronomic, health, safety, or other impacts of GE crops and food, and makes recommendations to fill gaps in safety assessments, increase regulatory clarity, and improve innovations in and access to GE technology.
Download or read book Textile Technology Digest written by and published by . This book was released on 2001 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Master s Theses Directories written by and published by . This book was released on 2005 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Education, arts and social sciences, natural and technical sciences in the United States and Canada".
Download or read book Cotton Breeding and Biotechnology written by Zulqurnain Khan and published by CRC Press. This book was released on 2022-03-14 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cotton Breeding and Biotechnology presents information on one of the most economically important crops of the world, cotton. This book contains chapters on the history of cotton; breeding approaches; technologies for increasing germination, crop growth and yield; and fiber quality issues. It emphasizes sustainable development in the cotton industry analysing the progress of breeding technologies under environmental adversity. The book explores the national and global status of cotton crop, including cotton production, possible impacts of climate change, and the vulnerability of cotton to pest infestations and disease attacks. Features Focuses on cotton breeding and biotechnology Proposes ideas, data, and strategies to mount breeding programs for enhancing cotton production Details strategies for cotton quality improvement against abiotic and biotic stresses Emphasizes the revival of cotton in Pakistan and South Asian region This book is useful to researchers, cotton breeders and growers, farmers, and the agriculture industry.
Download or read book Sticky Cotton written by Eric F. Hequet and published by Texas Tech University Press. This book was released on 2006 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: An essential reference for anyone searching for ways to avoid or mitigate the problem of cotton stickiness.
Download or read book World Cotton Germplasm Resources written by Ibrokhim Y. Abdurakhmonov and published by BoD – Books on Demand. This book was released on 2014-07-02 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Preservation of plant germplasm resources is vitally important for mankind to supply food and product security in the globalization and technological advances of the 21st century. Mankind preserved a wealth of available genetic resources of many plant species worldwide. One of the such worldwide plant germplasm resources is available for cotton, a unique natural fiber producing cash crop for mankind. Worldwide cotton germplasm collections exist in Australia, Brazil, China, India, France, Pakistan, Turkey, Russia, United States of America, and Uzbekistan. The objective of World Cotton Germplasm Resources book is to present readers with updated information on existing cotton germplasm resources, highlighting detailed inventory, description, storage conditions, characterization and utilization as well as challenges and perspectives. This book should be a comprehensive encyclopedic reading source for plant research community and students to gather important information on worldwide cotton germplasm resources.
Download or read book Plant Breeding Abstracts written by and published by . This book was released on 1999 with total page 1664 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cotton Physiology written by Jack R. Mauney and published by . This book was released on 1986 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cotton Facts written by M. Rafiq Chaudhry and published by . This book was released on 2003 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Genetically Modified Pest Protected Plants written by National Research Council and published by National Academies Press. This book was released on 2000-08-23 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the risks and benefits of crops that are genetically modified for pest resistance, the urgency of establishing an appropriate regulatory framework for these products, and the importance of public understanding of the issues. The committee critically reviews federal policies toward transgenic products, the 1986 coordinated framework among the key federal agencies in the field, and rules proposed by the Environmental Protection Agency for regulation of plant pesticides. This book provides detailed analyses of: Mechanisms and results of genetic engineering compared to conventional breeding for pest resistance. Review of scientific issues associated with transgenic pest-protected plants, such as allergenicity, impact on nontarget plants, evolution of the pest species, and other concerns. Overview of regulatory framework and its use of scientific information with suggestions for improvements.
Download or read book Cotton Production Manual written by S. Johnson Hake and published by University of California, Agriculture and Natural Resources. This book was released on 1996 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Cotton Production Manual was written for growers everywhere who strive to improve cotton quality and productivity. Features a season-by season production calendar with pest and disease control, fertilization, and irrigation tips and a Diagnostic Guide to help you identify crop problems in the field with management options. 12 pages of color plates.
Download or read book Cotton Production written by Khawar Jabran and published by John Wiley & Sons. This book was released on 2019-08-05 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a comprehensive overview of the role of cotton in the economy and cotton production around the world This book offers a complete look at the world’s largest fiber crop: cotton. It examines its effect on the global economy—its uses and products, harvesting and processing, as well as the major challenges and their solutions, recent trends, and modern technologies involved in worldwide production of cotton. Cotton Production presents recent developments achieved by major cotton producing regions around the world, including China, India, USA, Pakistan, Turkey and Europe, South America, Central Asia, and Australia. In addition to origin and history, it discusses the recent advances in management practices, as well as the agronomic challenges and the solutions in the major cotton producing areas of the world. Keeping a focus on global context, the book provides sufficient details regarding the management of cotton crops. These details are not limited to the choice of cultivar, soil management, fertilizer and water management, pest control, cotton harvesting, and processing. The first book to cover all aspects of cotton production in a global context Details the role of cotton in the economy, the uses and products of cotton, and its harvesting and processing Discusses the current state of cotton management practices and issues within and around the world’s cotton producing areas Provides insight into the ways to improve cotton productivity in order to keep pace with the growing needs of an increasing population Cotton Production is an essential book for students taking courses in agronomy and cropping systems as well as a reference for agricultural advisors, extension specialists, and professionals throughout the industry.
Download or read book Environmental Effects of Transgenic Plants written by National Research Council and published by National Academies Press. This book was released on 2002-02-22 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transgenic crops offer the promise of increased agricultural productivity and better quality foods. But they also raise the specter of harmful environmental effects. In this new book, a panel of experts examines: • Similarities and differences between crops developed by conventional and transgenic methods • Potential for commercialized transgenic crops to change both agricultural and nonagricultural landscapes • How well the U.S. government is regulating transgenic crops to avoid any negative effects. Environmental Effects of Transgenic Plants provides a wealth of information about transgenic processes, previous experience with the introduction of novel crops, principles of risk assessment and management, the science behind current regulatory schemes, issues in monitoring transgenic products already on the market, and more. The book discusses public involvementâ€"and public confidenceâ€"in biotechnology regulation. And it looks to the future, exploring the potential of genetic engineering and the prospects for environmental effects.
