Download or read book Plant Engineer s Handbook written by R. Keith Mobley and published by Elsevier. This book was released on 2001-05-14 with total page 1203 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plant engineers are responsible for a wide range of industrial activities, and may work in any industry. This means that breadth of knowledge required by such professionals is so wide that previous books addressing plant engineering have either been limited to only certain subjects or cursory in their treatment of topics. The Plant Engineering Handbook offers comprehensive coverage of an enormous range of subjects which are of vital interest to the plant engineer and anyone connected with industrial operations or maintenance.This handbook is packed with indispensable information, from defining just what a Plant Engineer actually does, through selection of a suitable site for a factory and provision of basic facilities (including boilers, electrical systems, water, HVAC systems, pumping systems and floors and finishes) to issues such as lubrication, corrosion, energy conservation, maintenance and materials handling as well as environmental considerations, insurance matters and financial concerns. One of the major features of this volume is its comprehensive treatment of the maintenance management function; in addition to chapters which outline the operation of the various plant equipment there is specialist advice on how to get the most out of that equipment and its operators. This will enable the reader to reap the rewards of more efficient operations, more effective employee contributions and in turn more profitable performance from the plant and the business to which it contributes.The Editor, Keith Mobley and the team of expert contributors, have practiced at the highest levels in leading corporations across the USA, Europe and the rest of the world. Produced in association with Plant Engineering magazine, this book will be a source of information for plant engineers in any industry worldwide.* A Flagship reference work for the Plant Engineering series* Provides comprehensive coverage on an enormous range of subjects vital to plant and industrial engineer* Includes an international perspective including dual units and regulations

Download or read book Availability Engineering and Management for Manufacturing Plant Performance written by Richard G. Lamb and published by Pearson Education. This book was released on 1995-03-08 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: In today's manufacturing environment, the integration of commercial, production, maintenance, and engineering functions is a common and crucial goal. In this timely volume, Richard G. Lamb presents a new standard within the enterprise and plant design management. Lamb shows readers how to advance the plant's role in enterprise business performance and leadership by most cost effectively achieving the mechanical availability necessary to perform in the face of current events, business cycles, and industry trends. Performance is from the designed and managed reliability and maintainability of its equipment.

Download or read book Plant Engineer s Reference Book written by DENNIS A SNOW and published by Elsevier. This book was released on 2013-10-22 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt: * Useful to engineers in any industry * Extensive references provided throughout * Comprehensive range of topics covered * Written with practical situations in mind A plant engineer is responsible for a wide range of industrial activities, and may workin any industry. The breadth of knowledge required by such professionals is so wide that previous books addressing plant engineering have either been limited to certain subjects or cursory in their treatment of topics. The Plant Engineer's Reference Bookis the first volume to offer complete coverage of subjects of interest to the plant engineer. This reference work provides a primary source of information for the plant engineer. Subjects include selection of a suitable site for a factory and provisionof basic facilities (including boilers, electrical systems, water, HVAC systems, pumping systems and floors and finishes). Detailed chapters deal with basic issues such as lubrication, corrosion, energy conservation, maintenance and materials handling aswell as environmental considerations, insurance matters and financial concerns. The authors chosen to contribute to the book are experts in their various fields. The Editor has experience of a wide range of operations in the UK, other Europeancountries, the USA, and elsewhere in the world. Produced with the backing of the Institution of Plant Engineers, this work is the primary source of information for plant engineers in any industry worldwide.

Download or read book Process Engineering and Plant Design written by Siddhartha Mukherjee and published by CRC Press. This book was released on 2021-12-28 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides the whole horizon of process engineering and plant design from concept phase through the execution to commissioning of the plant in the real practice. Providing a complete industrial perspective, the book: Covers the guidelines and standards followed in the industry and how engineering documents are generated using these standards Describes Hazardous Area Classification, Relief System Design, Revamp Engineering, Interaction with Other Disciplines, and Pre-commissioning and Commissioning Contains several illustrated practical examples, which clarify the fundamentals to a raw chemical engineer Includes description of a complete chemical project from concept to commissioning Treating the topic from the perspective of an industrial employee with extensive experience in process engineering and plant design, it aims to aid chemical and plant engineers to deal with decision making processes on strategic level, management tasks and leading functions beside the technical know-how.

Download or read book Plant Equipment Maintenance Engineering Handbook written by Duncan Richardson and published by McGraw Hill Professional. This book was released on 2013-07-22 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Best On-the-Job Guide to Industrial Plant Equipment and Systems This practical, one-of-a-kind field manual explains how equipment in industrial facilities operates and covers all aspects of commissioning relevant to engineers and project managers. Plant Equipment and Maintenance Engineering Handbook contains a data log of all major industrial and power plant components, describes how they function, and includes rules of thumb for operation. Hundreds of handy reference materials, such as calculations and tables, plus a comprehensive listing of electrical parts with common supplier nomenclature are also included in this time-saving resource. FEATURES DETAILED COVERAGE OF: Compressors * Air conditioning * Ash handling * Bearings and lubrication * Boilers * Chemical cleaning and Flushing * Condensers and circulating water systems * Controls * Conveyor systems * Cooling towers * Corrosion Deaerators * Diesel and gas turbines * Electrical * Fans * Fire protection * Fuels and combustion * Piping * Pumps Turbines * Vibration * Water treatment

Download or read book Handbook for Process Plant Project Engineers written by Peter Watermeyer and published by John Wiley & Sons. This book was released on 2002-09-27 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: This excellent book systematically identifies the issues surrounding the effective linking of project management techniques and engineering applications. It is not a technical manual, nor is it procedure-led. Instead, it encourages creative learning of project engineering methodology that can be applied and modified in different situations. In short, it offers a distillation of practical ‘on-the job’ experience to help project engineers perform more effectively. While this book specifically addresses process plants, the principles are applicable to other types of engineering project where multidisciplinary engineering skills are required, such as power plant and general factory construction. It focuses on the technical aspects, which typically influence the configuration of the plant as a whole, on the interface between the various disciplines involved, and the way in which work is done – the issues central to the co-ordination of the overall engineering effort. It develops an awareness of relationships with other parties – clients, suppliers, package contractors, and construction managers – and of how the structure and management of these relationships impact directly on the performance of the project engineer. Readers will welcome the author’s straightforward approach in tackling sensitive issues head on. COMPLETE CONTENTS Introduction A process plant A project and its management A brief overview The engineering work and its management The project’s industrial environment The commercial environment The contracting environment The economic environment Studies and proposals Plant layout and modelling Value engineering and plant optimization Hazards, loss, and safety Specification, selection and purchase Fluid transport Bulk solids transport Slurries and two-phase transport Hydraulic design and plant drainage Observations on multidiscipline engineering Detail design and drafting The organization of work Construction Construction contracts Commissioning Communication Change and chaos Fast-track projects Advanced information management Project strategy development Key issues summary

Download or read book Industrial Machinery Repair written by Ricky Smith and published by Elsevier. This book was released on 2003-08-18 with total page 561 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Machinery Repair provides a practical reference for practicing plant engineers, maintenance supervisors, physical plant supervisors and mechanical maintenance technicians. It focuses on the skills needed to select, install and maintain electro-mechanical equipment in a typical industrial plant or facility. The authors focuses on "Best Maintenance Repair Practices" necessary for maintenance personnel to keep equipment operating at peak reliability and companies functioning more profitably through reduced maintenance costs and increased productivity and capacity. A number of surveys conducted in industries throughout the United States have found that 70% of equipment failures are self-induced. If the principles and techniques in this book are followed, it will result in a serious reduction in "self induced failures". In the pocketbook format, this reference material can be directly used on the plant floor to aid in effectively performing day-to-day duties. Data is presented in a concise, easily understandable format to facilitate use in the adverse conditions associated with the plant floor. Each subject is reduced to it simplest terms so that it will be suitable for the broadest range of users. Since this book is not specific to any one type of industrial plant and is useful in any type of facility. - The new standard reference book for industrial and mechanical trades - Accessible pocketbook format facilitates on-the-job use - Suitable for all types of plant facilities

Download or read book Process Plant Design written by Frank Peter Helmus and published by John Wiley & Sons. This book was released on 2008-06-25 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the fascinating wealth of activities as they occur in the design, construction and commissioning of a chemical plant - a jigsaw puzzle of the work of chemical engineers, chemists, constructors, architects, electrical engineers, process automation engineers, economists and legal staff. The author first takes the reader through the conceptual phase, in which the economic relevance and environmental impact need to be considered and supplemented by accurate estimates of capital requirements and profitability. This phase ends with the choice of an appropriate engineering firm and the conclusion of the contract, after which the reader is guided through all aspects of the implementation phase from the engineering of the chemical plant to commissioning, equipment and material procurement, the erection phase and the successful test run, after which the new facility is handed over to its owner. The book also illustrates many potential sources of errors by means of examples from practice, and how, aside professional skills, teamwork and communication are also absolutely essential to keep such a complex project on track.

Download or read book Plant Design and Operations written by Ian Sutton and published by William Andrew. This book was released on 2014-10-06 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plant Design and Operations provides practical guidance on the design, operation, and maintenance of process facilities. The book is based on years of hands-on experience gathered during the design and operation of a wide range of facilities in many different types of industry including chemicals, refining, offshore oil and gas, and pipelines. The book helps managers, engineers, operators, and maintenance specialists with advice and guidance that can be used right away in working situations. Each chapter provides information and guidance that can be used immediately. For example, the chapter on Energy Control Procedures describes seven levels of positive isolation — ranging from a closed block valve all the way to double block and bleed with line break. The Safety in Design chapter describes topics such as area classification, fire protection, stairways and platforms, fixed ladders, emergency showers, lighting, and alarms. Other areas covered in detail by the book include security, equipment, and transportation. A logical, practical guide to maintenance task organization is provided, from conducting a Job Hazards Analysis to the issue of a work permit, and to the shutdown and isolation of equipment. Common hazards are covered in detail, including flow problems, high pressure, corrosion, power failure, and many more. - Provides information to managers, engineers, operators and maintenance personnel which is immediately applicable to their operations - Supported by useful, real-world examples and experience from a wide range of facilities and industries - Includes guidance on occupational health and safety, industrial hygiene and personal protective equipment

Download or read book An Introduction to Predictive Maintenance written by R. Keith Mobley and published by Elsevier. This book was released on 2002-10-24 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition of An Introduction to Predictive Maintenance helps plant, process, maintenance and reliability managers and engineers to develop and implement a comprehensive maintenance management program, providing proven strategies for regularly monitoring critical process equipment and systems, predicting machine failures, and scheduling maintenance accordingly. Since the publication of the first edition in 1990, there have been many changes in both technology and methodology, including financial implications, the role of a maintenance organization, predictive maintenance techniques, various analyses, and maintenance of the program itself. This revision includes a complete update of the applicable chapters from the first edition as well as six additional chapters outlining the most recent information available. Having already been implemented and maintained successfully in hundreds of manufacturing and process plants worldwide, the practices detailed in this second edition of An Introduction to Predictive Maintenance will save plants and corporations, as well as U.S. industry as a whole, billions of dollars by minimizing unexpected equipment failures and its resultant high maintenance cost while increasing productivity. - A comprehensive introduction to a system of monitoring critical industrial equipment - Optimize the availability of process machinery and greatly reduce the cost of maintenance - Provides the means to improve product quality, productivity and profitability of manufacturing and production plants

Download or read book Plant Management and Engineering written by and published by . This book was released on 1958 with total page 1058 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Engineer s Guide to Plant Layout and Piping Design for the Oil and Gas Industries written by Geoff B. Barker and published by Gulf Professional Publishing. This book was released on 2017-11-25 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Engineer's Guide to Plant Layout and Piping Design for the Oil and Gas Industries gives pipeline engineers and plant managers a critical real-world reference to design, manage, and implement safe and effective plants and piping systems for today's operations. This book fills a training void with complete and practical understanding of the requirements and procedures for producing a safe, economical, operable and maintainable process facility. Easy to understand for the novice, this guide includes critical standards, newer designs, practical checklists and rules of thumb. Due to a lack of structured training in academic and technical institutions, engineers and pipe designers today may understand various computer software programs but lack the fundamental understanding and implementation of how to lay out process plants and run piping correctly in the oil and gas industry. Starting with basic terms, codes and basis for selection, the book focuses on each piece of equipment, such as pumps, towers, underground piping, pipe sizes and supports, then goes on to cover piping stress analysis and the daily needed calculations to use on the job. - Delivers a practical guide to pipe supports, structures and hangers available in one go-to source - Includes information on stress analysis basics, quick checks, pipe sizing and pressure drop - Ensures compliance with the latest piping and plant layout codes and complies with worldwide risk management legislation and HSE - Focuses on each piece of equipment, such as pumps, towers, underground piping, pipe sizes and supports - Covers piping stress analysis and the daily needed calculations to use on the job

Download or read book CMMS written by Daryl Mather and published by CRC Press. This book was released on 2002-10-29 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: A prevalent system in large corporations for quite some time, Computerized Maintenance Management System (CMMS) is now penetrating moderate to small corporations on an international level. These corporations need an efficient method to implement this effective but complicated system. However, most of the texts currently available are written by the

Download or read book Maintenance Fundamentals written by R. Keith Mobley and published by Elsevier. This book was released on 2011-03-15 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: No matter which industry a company is a part of, its profitability, like its products, is driven by the reliability and performance of its plant(s). The fundamentals for maintenance found in this volume are applicable to a multitude of industries: power, process, materials, manufacturing, transportation, communication, and many others. This book shows the engineer how to select, install, maintain, and troubleshoot critical plant machinery, equipment, and systems. NEW to this edition: New material includes a chapter on inspections, providing practical guidelines for effective visual inspections, the key to effective preventive maintenance. Also included in the revision will be multiple chapters on equipment, such as pumps, compressors, and fans. - Provides practical knowledge about plant machinery, equipment, and systems for the new hire or the veteran engineer - Covers a wide array of topics, from shaft alignment and bearings to rotor balancing and flexible intermediate drives - Delivers must-have information to the engineer which he/she will use on a daily basis, in day-to-day activities, that will affect the reliability and profitability of the plant

Download or read book Piping Engineering Leadership for Process Plant Projects written by James Pennock and published by Elsevier. This book was released on 2001-07-02 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: James O. Pennock has compiled 45 years of personal experience into this how-to guide. Focusing on the position of "lead in charge," this book is an indispensable resource for anyone, new or seasoned veteran, whose job it is to lead the piping engineering and design of a project. The "lead" person is responsible for the successful execution of all piping engineering and design for a project, technical and non-technical aspects alike. The author defines the roles and responsibilities a lead will face and the differences found in various project types. - Incorporates four decades of personal experience in a How-To guide - Focuses on the position of "lead in charge" - Includes coverage of topics often ignored in other books yet essential for success: management, administrative, and control responsibilities

Download or read book Plant Engineers and Managers Guide to Energy Conservation written by Albert Thumann and published by CRC Press. This book was released on 2020-12-17 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: Completely revised and updated, this tenth edition of a bestseller covers both management and technical strategies for slashing energy costs by as much as 40 percent in industrial facilities. It discusses cogeneration, gas distributed generation technologies, steam system optimization, geothermal heat pumps, energy outsourcing, electricity purchasing strategies, and power quality case studies. It also provides guidelines for life cycle costing, electrical system optimization, lighting and HVAC system efficiency improvement, mechanical and process system performance, building energy loss reduction, financing energy projects, and more.

Download or read book Process Plant Lifecycle Information Management written by Robert Yang and published by iUniverse. This book was released on 2009-08-11 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process plants produce products and perform functions through some processes. There are many types of process plants covering a wide spectrum of industries from chemical, oil and gas, pharmaceutical, food, power generation, water and waste water treatment, nuclear, to specialized government plants. From engineering, procurement, construction to operations of process plants, the key elements of lifecycle operations are essentially generation, manipulation, and management of information. In addition to documents that are the traditional way of representing information, the trend now is to emphasis on usage of data, databases, and 3-D models. Efficient plant lifecycle information management has to satisfy three basic requirements of what, when, and how information to be managed. Information integrity that means accuracy and currency is another key element of management consideration. Use of information data warehouse is an effective approach to store and control just one single source of information to be used throughout the plant lifecycle. Plant lifecycle information management is to increase productivity at the project level to reduce capital cost and time to market. At the plant level, the goal is to minimize plant operational expense and to maximize time in market. With proper information and information management, the plant owner/operator now has the tool to optimize operating parameters so both quality and quantity of the plant products can be improved. This book shows the basic principles and approaches of process plant lifecycle information management and how they can be applied to generate substantial cost and time savings. Thus, the readers with their own knowledge and experience in plant design and operations can adapt and implement them into their specific plant lifecycle applications.