Download or read book Plant Engineer s Handbook written by R. Keith Mobley and published by Elsevier. This book was released on 2001-05-14 with total page 1203 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plant engineers are responsible for a wide range of industrial activities, and may work in any industry. This means that breadth of knowledge required by such professionals is so wide that previous books addressing plant engineering have either been limited to only certain subjects or cursory in their treatment of topics. The Plant Engineering Handbook offers comprehensive coverage of an enormous range of subjects which are of vital interest to the plant engineer and anyone connected with industrial operations or maintenance. This handbook is packed with indispensable information, from defining just what a Plant Engineer actually does, through selection of a suitable site for a factory and provision of basic facilities (including boilers, electrical systems, water, HVAC systems, pumping systems and floors and finishes) to issues such as lubrication, corrosion, energy conservation, maintenance and materials handling as well as environmental considerations, insurance matters and financial concerns. One of the major features of this volume is its comprehensive treatment of the maintenance management function; in addition to chapters which outline the operation of the various plant equipment there is specialist advice on how to get the most out of that equipment and its operators. This will enable the reader to reap the rewards of more efficient operations, more effective employee contributions and in turn more profitable performance from the plant and the business to which it contributes. The Editor, Keith Mobley and the team of expert contributors, have practiced at the highest levels in leading corporations across the USA, Europe and the rest of the world. Produced in association with Plant Engineering magazine, this book will be a source of information for plant engineers in any industry worldwide. * A Flagship reference work for the Plant Engineering series * Provides comprehensive coverage on an enormous range of subjects vital to plant and industrial engineer * Includes an international perspective including dual units and regulations

Download or read book Plant Engineer s Reference Book written by DENNIS A SNOW and published by Elsevier. This book was released on 2013-10-22 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt: * Useful to engineers in any industry * Extensive references provided throughout * Comprehensive range of topics covered * Written with practical situations in mind A plant engineer is responsible for a wide range of industrial activities, and may work in any industry. The breadth of knowledge required by such professionals is so wide that previous books addressing plant engineering have either been limited to certain subjects or cursory in their treatment of topics. The Plant Engineer's Reference Book is the first volume to offer complete coverage of subjects of interest to the plant engineer. This reference work provides a primary source of information for the plant engineer. Subjects include selection of a suitable site for a factory and provision of basic facilities (including boilers, electrical systems, water, HVAC systems, pumping systems and floors and finishes). Detailed chapters deal with basic issues such as lubrication, corrosion, energy conservation, maintenance and materials handling as well as environmental considerations, insurance matters and financial concerns. The authors chosen to contribute to the book are experts in their various fields. The Editor has experience of a wide range of operations in the UK, other European countries, the USA, and elsewhere in the world. Produced with the backing of the Institution of Plant Engineers, this work is the primary source of information for plant engineers in any industry worldwide.

Download or read book Handbook for Process Plant Project Engineers written by Peter Watermeyer and published by John Wiley & Sons. This book was released on 2002-09-27 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: This excellent book systematically identifies the issues surrounding the effective linking of project management techniques and engineering applications. It is not a technical manual, nor is it procedure-led. Instead, it encourages creative learning of project engineering methodology that can be applied and modified in different situations. In short, it offers a distillation of practical ‘on-the job’ experience to help project engineers perform more effectively. While this book specifically addresses process plants, the principles are applicable to other types of engineering project where multidisciplinary engineering skills are required, such as power plant and general factory construction. It focuses on the technical aspects, which typically influence the configuration of the plant as a whole, on the interface between the various disciplines involved, and the way in which work is done – the issues central to the co-ordination of the overall engineering effort. It develops an awareness of relationships with other parties – clients, suppliers, package contractors, and construction managers – and of how the structure and management of these relationships impact directly on the performance of the project engineer. Readers will welcome the author’s straightforward approach in tackling sensitive issues head on. COMPLETE CONTENTS Introduction A process plant A project and its management A brief overview The engineering work and its management The project’s industrial environment The commercial environment The contracting environment The economic environment Studies and proposals Plant layout and modelling Value engineering and plant optimization Hazards, loss, and safety Specification, selection and purchase Fluid transport Bulk solids transport Slurries and two-phase transport Hydraulic design and plant drainage Observations on multidiscipline engineering Detail design and drafting The organization of work Construction Construction contracts Commissioning Communication Change and chaos Fast-track projects Advanced information management Project strategy development Key issues summary

Download or read book Plant Equipment Maintenance Engineering Handbook written by Duncan Richardson and published by McGraw Hill Professional. This book was released on 2013-07-22 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Best On-the-Job Guide to Industrial Plant Equipment and Systems This practical, one-of-a-kind field manual explains how equipment in industrial facilities operates and covers all aspects of commissioning relevant to engineers and project managers. Plant Equipment and Maintenance Engineering Handbook contains a data log of all major industrial and power plant components, describes how they function, and includes rules of thumb for operation. Hundreds of handy reference materials, such as calculations and tables, plus a comprehensive listing of electrical parts with common supplier nomenclature are also included in this time-saving resource. FEATURES DETAILED COVERAGE OF: Compressors * Air conditioning * Ash handling * Bearings and lubrication * Boilers * Chemical cleaning and Flushing * Condensers and circulating water systems * Controls * Conveyor systems * Cooling towers * Corrosion Deaerators * Diesel and gas turbines * Electrical * Fans * Fire protection * Fuels and combustion * Piping * Pumps Turbines * Vibration * Water treatment

Download or read book Practical Power Plant Engineering written by Zark Bedalov and published by John Wiley & Sons. This book was released on 2020-01-24 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical Power Plant Engineering offers engineers, new to the profession, a guide to the methods of practical design, equipment selection and operation of power and heavy industrial plants as practiced by experienced engineers. The author—a noted expert on the topic—draws on decades of practical experience working in a number of industries with ever-changing technologies. This comprehensive book, written in 26 chapters, covers the electrical activities from plant design, development to commissioning. It is filled with descriptive examples, brief equipment data sheets, relay protection, engineering calculations, illustrations, and common-sense engineering approaches. The book explores the most relevant topics and reviews the industry standards and established engineering practices. For example, the author leads the reader through the application of MV switchgear, MV controllers, MCCs and distribution lines in building plant power distribution systems, including calculations of interrupting duty for breakers and contactors. The text also contains useful information on the various types of concentrated and photovoltaic solar plants as well as wind farms with DFIG turbines. This important book: • Explains why and how to select the proper ratings for electrical equipment for specific applications • Includes information on the critical requirements for designing power systems to meet the performance requirements • Presents tests of the electrical equipment that prove it is built to the required standards and will meet plant-specific operating requirements Written for both professional engineers early in their career and experienced engineers, Practical Power Plant Engineering is a must-have resource that offers the information needed to apply the concepts of power plant engineering in the real world.

Download or read book Standard Handbook of Powerplant Engineering written by Thomas C. Elliott and published by McGraw Hill Professional. This book was released on 2012-09-17 with total page 1246 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extensively revised and updated, this new edition of a classic resource provides powerplant engineers with a full range of information from basic operations to leading-edge technologies, including steam generation, turbines and diesels, fuels and fuel handling, pollution control, plant electrical systems, and instrumentation and control. New material covers various energy resources for power generation, nuclear plant systems, hydroelectric power stations, alternative and cogeneration energy plants, and environmental controls. With over 600 drawings, diagrams, and photographs, it offers engineers and technicians the information needed to keep powerplants operating smoothly into the 21st century.

Download or read book Standard Handbook for Electrical Engineers written by and published by . This book was released on 1908 with total page 1326 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Maintenance Engineering Handbook written by Keith Mobley and published by McGraw Hill Professional. This book was released on 2008-04-20 with total page 1250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stay Up to Date on the Latest Issues in Maintenance Engineering The most comprehensive resource of its kind, Maintenance Engineering Handbook has long been a staple for engineers, managers, and technicians seeking current advice on everything from tools and techniques to planning and scheduling. This brand-new edition brings you up to date on the most pertinent aspects of identifying and repairing faulty equipment; such dated subjects as sanitation and housekeeping have been removed. Maintenance Engineering Handbook has been advising plant and facility professionals for more than 50 years. Whether you're new to the profession or a practiced veteran, this updated edition is an absolute necessity. New and updated sections include: Belt Drives, provided by the Gates Corporation Repair and Maintenance Cost Estimation Ventilation Fans and Exhaust Systems 10 New Chapters on Maintenance of Mechanical Equipment Inside: • Organization and Management of the Maintenance Function • Maintenance Practices • Engineering and Analysis Tools • Maintenance of Facilities and Equipment • Maintenance of Mechanical Equipment • Maintenance of Electrical Equipment • Instrumentation and Reliability Tools • Lubrication • Maintenance Welding • Chemical Corrosion Control and Cleaning

Download or read book Standard Handbook for Mechanical Engineers written by and published by . This book was released on 1923 with total page 1874 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mechanical Engineers Handbook Volume 3 written by Myer Kutz and published by John Wiley & Sons. This book was released on 2015-02-02 with total page 880 pages. Available in PDF, EPUB and Kindle. Book excerpt: Full coverage of manufacturing and management in mechanical engineering Mechanical Engineers' Handbook, Fourth Edition provides a quick guide to specialized areas that engineers may encounter in their work, providing access to the basics of each and pointing toward trusted resources for further reading, if needed. The book's accessible information offers discussions, examples, and analyses of the topics covered, rather than the straight data, formulas, and calculations found in other handbooks. No single engineer can be a specialist in all areas that they are called upon to work in. It's a discipline that covers a broad range of topics that are used as the building blocks for specialized areas, including aerospace, chemical, materials, nuclear, electrical, and general engineering. This third volume of Mechanical Engineers' Handbook covers Manufacturing & Management, and provides accessible and in-depth access to the topics encountered regularly in the discipline: environmentally benign manufacturing, production planning, production processes and equipment, manufacturing systems evaluation, coatings and surface engineering, physical vapor deposition, mechanical fasteners, seal technology, statistical quality control, nondestructive inspection, intelligent control of material handling systems, and much more. Presents the most comprehensive coverage of the entire discipline of Mechanical Engineering Focuses on the explanation and analysis of the concepts presented as opposed to a straight listing of formulas and data found in other handbooks Offers the option of being purchased as a four-book set or as single books Comes in a subscription format through the Wiley Online Library and in electronic and other custom formats Engineers at all levels of industry, government, or private consulting practice will find Mechanical Engineers' Handbook, Volume 3 an "off-the-shelf" reference they'll turn to again and again.

Download or read book Gas Turbine Engineering Handbook written by Meherwan P. Boyce and published by Elsevier. This book was released on 2017-09-01 with total page 956 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Gas Turbine Engineering Handbook has been the standard for engineers involved in the design, selection, and operation of gas turbines. This revision includes new case histories, the latest techniques, and new designs to comply with recently passed legislation. By keeping the book up to date with new, emerging topics, Boyce ensures that this book will remain the standard and most widely used book in this field. The new Third Edition of the Gas Turbine Engineering Hand Book updates the book to cover the new generation of Advanced gas Turbines. It examines the benefit and some of the major problems that have been encountered by these new turbines. The book keeps abreast of the environmental changes and the industries answer to these new regulations. A new chapter on case histories has been added to enable the engineer in the field to keep abreast of problems that are being encountered and the solutions that have resulted in solving them. Comprehensive treatment of Gas Turbines from Design to Operation and Maintenance. In depth treatment of Compressors with emphasis on surge, rotating stall, and choke; Combustors with emphasis on Dry Low NOx Combustors; and Turbines with emphasis on Metallurgy and new cooling schemes. An excellent introductory book for the student and field engineers A special maintenance section dealing with the advanced gas turbines, and special diagnostic charts have been provided that will enable the reader to troubleshoot problems he encounters in the field The third edition consists of many Case Histories of Gas Turbine problems. This should enable the field engineer to avoid some of these same generic problems

Download or read book Chemical and Process Plant Commissioning Handbook written by Martin Killcross and published by Elsevier. This book was released on 2011-09-27 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Chemical and Process Plant Commissioning Handbook, winner of the 2012 Basil Brennan Medal from the Institution of Chemical Engineers, is a guide to converting a newly constructed plant or equipment into a fully integrated and operational process unit. Good commissioning is based on a disciplined, systematic and proven methodology and approach that achieve results in the safest, most efficient, cost effective and timely manner. The book is supported by detailed, proven and effective commission templates, plus extensive commissioning scenarios that enable the reader to learn the context of good commissioning practice from an experienced commissioning manager. It focuses on the critical safety assessment and inspection regimes necessary to ensure that new plants are compliant with OSHA and environmental requirements. Martin Killcross has brought together the theory of textbooks and technical information obtained from sales literature, in order to provide engineers with what they need to know before initiating talks with vendors regarding equipment selection. Unique information from a respected, global commissioning manager: delivers the know-how to succeed for anyone commissioning new plant or equipment Comes with online commissioning process templates that make this title a working tool kit as well as a key reference Extensive examples of successful commissioning processes with step-by-step guidance enable readers to understand the function and performance of the wide range of tasks required in the commissioning process

Download or read book Power Plant Engineers Guide written by Frank Duncan Graham and published by . This book was released on 1966 with total page 964 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book An Applied Guide to Process and Plant Design written by Sean Moran and published by Elsevier. This book was released on 2019-06-12 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Applied Guide to Process and Plant Design, 2nd edition, is a guide to process plant design for both students and professional engineers. The book covers plant layout and the use of spreadsheet programs and key drawings produced by professional engineers as aids to design; subjects that are usually learned on the job rather than in education. You will learn how to produce smarter plant design through the use of computer tools, including Excel and AutoCAD, “What If Analysis, statistical tools, and Visual Basic for more complex problems. The book also includes a wealth of selection tables, covering the key aspects of professional plant design which engineering students and early-career engineers tend to find most challenging. Professor Moran draws on over 20 years’ experience in process design to create an essential foundational book ideal for those who are new to process design, compliant with both professional practice and the IChemE degree accreditation guidelines. Includes new and expanded content, including illustrative case studies and practical examples Explains how to deliver a process design that meets both business and safety criteria Covers plant layout and the use of spreadsheet programs and key drawings as aids to design Includes a comprehensive set of selection tables, covering aspects of professional plant design which early-career designers find most challenging

Download or read book Manufacturing Engineering Handbook written by Hwaiyu Geng and published by McGraw Hill Professional. This book was released on 2004-07-13 with total page 1193 pages. Available in PDF, EPUB and Kindle. Book excerpt: Let our teams of experts help you to stay competitive in a global marketplace. It is every company's goal to build the highest quality goods at the lowest price in the shortest time possible. With the Manufacturing Engineering Handbook you'll have access to information on conventional and modern manufacturing processes and operations management that you didn't have before. For example, if you are a manufacturing engineer responding to a request for proposal (RFP), you will find everything you need for estimating manufacturing cost, labor cost and overall production cost by turning to chapter 2, section 2.5, the manufacturing estimating section. The handbook will even outline the various manufacturing processes for you. If you are a plant engineer working in an automotive factory and find yourself in the hot working portion of the plant, you should look up section 6 on hot work and forging processing. You will find it very useful for learning the machines and processes to get the job done. Likewise, if you are a Design Engineer and need information regarding hydraulics, generators & transformers, turn to chapter 3, section 3.2.3, and you’ll find generators & transformers. Covering topics from engineering mathematics to warehouse management systems, Manufacturing Engineering Handbook is the most comprehensive single-source guide to Manufacturing Engineering ever published.

Download or read book Plant Engineers and Managers Guide to Energy Conservation written by Albert Thumann and published by CRC Press. This book was released on 2020-12-17 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: Completely revised and updated, this tenth edition of a bestseller covers both management and technical strategies for slashing energy costs by as much as 40 percent in industrial facilities. It discusses cogeneration, gas distributed generation technologies, steam system optimization, geothermal heat pumps, energy outsourcing, electricity purchasing strategies, and power quality case studies. It also provides guidelines for life cycle costing, electrical system optimization, lighting and HVAC system efficiency improvement, mechanical and process system performance, building energy loss reduction, financing energy projects, and more.

Download or read book Process Engineering and Plant Design written by Siddhartha Mukherjee and published by CRC Press. This book was released on 2021-12-28 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides the whole horizon of process engineering and plant design from concept phase through the execution to commissioning of the plant in the real practice. Providing a complete industrial perspective, the book: Covers the guidelines and standards followed in the industry and how engineering documents are generated using these standards Describes Hazardous Area Classification, Relief System Design, Revamp Engineering, Interaction with Other Disciplines, and Pre-commissioning and Commissioning Contains several illustrated practical examples, which clarify the fundamentals to a raw chemical engineer Includes description of a complete chemical project from concept to commissioning Treating the topic from the perspective of an industrial employee with extensive experience in process engineering and plant design, it aims to aid chemical and plant engineers to deal with decision making processes on strategic level, management tasks and leading functions beside the technical know-how.