Download or read book The Planning and Scheduling of Production Systems written by Abdelhakim Artiba and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: If one accepts the premise that there is no wealth without production, whether at the individual or national level, one is immediately led to the conclusion that the study of productive systems lies at the forefront of subjects that should be intensively, as well as rationally and extensively, studied to achieve the desired 'sustainable growth' of society, where the latter is defined as growth in the quality of life that does not waste the available resources in the long run. Since the end of World War II there has been a remarkable evolution in thinking about production, abetted to a large measure by the nascent field of informatics: the computer technology and the edifices that have been built around it, such as information gathering and dissemination worldwide through communication networks, software products, peripheral interfaces, etc. Additionally, the very thought processes that guide and motivate studies in production have undergone fundamental changes which verge on being revolutionary, thanks to developments in operations research and cybernetics.

Download or read book Production Planning and Control written by D.R. Kiran and published by Butterworth-Heinemann. This book was released on 2019-06-18 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: Production Planning and Control draws on practitioner experiences on the shop floor, covering everything a manufacturing or industrial engineer needs to know on the topic. It provides basic knowledge on production functions that are essential for the effective use of PP&C techniques and tools. It is written in an approachable style, thus making it ideal for readers with limited knowledge of production planning. Comprehensive coverage includes quality management, lean management, factory planning, and how they relate to PP&C. End of chapter questions help readers ensure they have grasped the most important concepts. With its focus on actionable knowledge and broad coverage of essential reference material, this is the ideal PP&C resource to accompany work, research or study. - Uses practical examples from the industry to clearly illustrate the concepts presented - Provides a basic overview of statistics to accompany the introduction to forecasting - Covers the relevance of PP&C to key emerging themes in manufacturing technology, including the Industrial Internet of Things and Industry 4

Download or read book Production Systems written by James L. Riggs and published by John Wiley & Sons. This book was released on 1981 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the decade that has passed since the initial publication of Production Systems, many time-tested techniques for planning, analysis and control remain unchanged; however, most have benefited from new technology and recent developments. This updated version presents the newest concepts and explores the current problems facing production analysts, including inflation, limited resources, preservation, computer-aided design and manufacturing, and productivity improvement.

Download or read book Production Planning and Control written by Hemant Sharma and published by BookRix. This book was released on 2019-06-04 with total page 89 pages. Available in PDF, EPUB and Kindle. Book excerpt: Production Planning and Control draws on practitioner experiences on the shop floor, covering everything a manufacturing or industrial engineer needs to know on the topic. It provides basic knowledge on production functions that are essential for the effective use of PP&C techniques and tools. It is written in an approachable style, thus making it ideal for readers with limited knowledge of production planning. Comprehensive coverage includes quality management, lean management, factory planning, and how they relate to PP&C. End of chapter questions help readers ensure they have grasped the most important concepts. With its focus on actionable knowledge and broad coverage of essential reference material, this is the ideal PP&C resource to accompany work, research or study.

Download or read book Planning and Control of Productive Systems written by Abdelhakim Artiba and published by . This book was released on 2003 with total page 121 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Production and Operations Management Systems written by Sushil Gupta and published by CRC Press. This book was released on 2014-02-07 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the beginning of mankind on Earth, if the "busyness" process was successful, then some form of benefit sustained it. The fundamentals are obvious: get the right inputs (materials, labor, money, and ideas); transform them into highly demanded, quality outputs; and make it available in time to the end consumer. Illustrating how operations relate to the rest of the organization, Production and Operations Management Systems provides an understanding of the production and operations management (P/OM) functions as well as the processes of goods and service producers. The modular character of the text permits many different journeys through the materials. If you like to start with supply chain management (Chapter 9) and then move on to inventory management (Chapter 5) and then quality management (Chapter 8), you can do so in that order. However, if your focus is product line stability and quick response time to competition, you may prefer to begin with project management (Chapter 7) to reflect the continuous project mode required for fast redesign rapid response. Slides, lectures, Excel worksheets, and solutions to short and extended problem sets are available on the Downloads / Updates tabs. The project management component of P/OM is no longer an auxiliary aspect of the field. The entire system has to be viewed and understood. The book helps students develop a sense of managerial competence in making decisions in the design, planning, operation, and control of manufacturing, production, and operations systems through examples and case studies. The text uses analytical techniques when necessary to develop critical thinking and to sharpen decision-making skills. It makes production and operations management (P/OM) interesting, even exciting, to those who are embarking on a career that involves business of any kind.

Download or read book Computer Aided Production Management written by Asbjorn Rolstadas and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to discuss the state of the art and future trends in the field of computerized production management systems. It is composed of a number of independent papers, each presented in a chapter. Some of the widely recognized experts in the field around the world have been asked to contribute. lowe each of them my sincere gratitude for their kind cooperation. I am also grateful to Peter Falster and Jim Browne for their kind support in helping me to review topics to be covered and to select the authors. This book is a result of the professional work done in the International Federation of Information Processing Technical Committee IFIP TC5 "Com puter Applications in Technology" and especially in the Working Group WG5. 7 "Computer-Aided Production Management". This group was established in 1978 with the aim of promoting and encouraging the advancement of the field of computer systems for the production management of manufacturing, off shore, construction, electronic and similar and related industries. The scope of the work includes, but is not limited to, the following topics: 1) design and implementation of new production planning and control systems taking into account new technology and management philosophy; 2) CAPM in a CIM environment including interfaces to CAD and CAM; 3) project management and cost engineering; 4) knowledge engineering in CAPM; 5) CAPM for Flexible Manufacturing Systems (FMS) and Flexible Assembly Systems (F AS); 6) methods and concepts in CAPM; 7) economic and social implications of CAPM.

Download or read book Operations Research in Production Planning and Control written by Günter Fandel and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume contains selected and refereed contributions that were presented at the conference on "Recent Developments and New Perspectives of Operations Research in the Area of Production Planning and Control" in Hagen/Germany, 25. - 26. June 1992. This conference was organized with the cooperation of the FernuniversiHit Hagen and was jointly hosted by the "Deutsche Gesellschaft fur Operations Research (DGOR)" and the "Manufacturing Special Interest Group of the Operations Research Society of America (ORSA-SIGMA)". For the organization of the conference we received generous financial support from the sponsors listed at the end of this volume. We wish to express our appreciation to all supporters for their contributions. This conference was the successor of the JOInt ORSA/DGOR-conference in Gaithersburg/Maryland, USA, on the 30. and 31. July 1991. Both OR-societies committed themselves in 1989 to host joint conferences on special topics of interest from the field of operations research. This goal has been successfully realized in the area of production management; and it should be an incentive to conduct similar joint conferences on other topics of operations research in the years to come. The 36 contributions in this proceedings volume deal with general and special problems in production planning as well as approaches and algorithms for their solution. They cover a wide range of operations research within product management and will therefore address a wide circle of interested readers among OR-scientists and professionals alike.

Download or read book Capacity and Inventory Planning for Make to Order Production Systems written by Klaus Altendorfer and published by Springer Science & Business Media. This book was released on 2013-07-31 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: ​The book presents different models for the simultaneous optimization problem of capacity investment and work release rule parameterization. The overall costs are minimized either including backorder costs or considering a service level constraint. The available literature is extended with the integration of a distributed customer required lead time in addition to the actual demand distribution. Furthermore, an endogenous production lead time is introduced. Different models for make-to-order production systems with one or multiple serial processing stages are developed. Capacity investment is linked to the processing rates of the machines or to the number of the machines. Results are equations for service level, tardiness, and FGI lead time in such a production system. For special cases with M/M/1 and M/M/s queues explicit solutions of the optimization problems or optimality conditions concerning capacity investment and work release rule parameterization are provided.

Download or read book Production and Operations Management written by Richard B. Chase and published by Irwin Professional Publishing. This book was released on 1981 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Production Systems Management Planning Scheduling Control Measurement and Improvement written by Andrea Sianesi and published by . This book was released on 2021 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Production Management Systems written by Jan Olhager and published by Springer. This book was released on 2007-12-24 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together some of the latest thinking by leading experts from around the world on integrating systems and strategies in production management and related issues that are relevant for making production into a competitive resource for the firm. This book is composed of five parts, each focused on a specific theme: Linking systems and strategies; Strategic operations management; IS/IT applications in the value chain; Modelling and simulation; Improving operations.

Download or read book The Planning and Control of Production Systems in the Process Industries written by J. H. Champion and published by . This book was released on 1973 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Production And Operations Management written by S. Anil Kumar and published by New Age International. This book was released on 2006 with total page 19 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Book Presents Lucid Treatment Of A Wide Range Of Issues Involved In Production And Operations Management. It Focuses On The Latest Techniques In Production Planning And Control Considered To Be Pivotal For Organizations, Which Aim At Maximizing Their Productivity And Profitability.The Book Further Discusses In Detail The Production System Concept, Facility Location, Plant Layout Design, Production Scheduling, Mass Production Techniques Such As Assembly Line Balancing Maintenance Planning And Control, Scheduling, Quality Control; And Modern Production Management Tools That Include Cim, Tqm And Iso 9000 Series.Primarily Designed As A Textbook For Various Courses Like Bbm, Bba, B.Com., Mba And Also Useful For Students Pursuing Courses, Production And Operations Management, Mechanical, Industrial And Production Engineering Of Bangalore And Other Indian Universities.Salient Features: * Book Is Written In Simple And Lucid Style * Contents Are Presented In A Most Meticulous Manner * Charts Are Provided For Easy Understanding Of The Concepts * Exercises Are Designed For Self-Evaluation And Include Objective Type, Analytical Type And Application Type Questions * Contains Examination Question Bank * Contains Exhaustive Glossary Of Terminologies * Focuses On Materials Management Concepts And Techniques * Focuses On Plant Location And Layout Concepts * Focuses On Statistical Quality Control Concepts And Technique * Focuses On Industrial Engineering Concepts Such As Time Motion Study, Maintenance Management, Waste Management & Automation

Download or read book Analysis and Control of Production Systems written by Elsayed A. Elsayed and published by . This book was released on 1994 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: For courses in inventory planning and control. An exploration of the analysis and control of production systems.

Download or read book Production and Operation Management written by Dr. M.K. Rastogi and published by Laxmi Publications, Ltd.. This book was released on 2010-02 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Manufacturing Planning and Control for Supply Chain Management written by F. Robert Jacobs and published by McGraw Hill Professional. This book was released on 2011-05-06 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive guide to manufacturing planning and control--FULLY REVISED AND UPDATED FOR THE CPIM EXAM Improve supply chain effectiveness, productivity, customer satisfaction, and profitability with help from this authoritative resource. Completely up-to-date, Manufacturing Planning and Control for Supply Chain Management: APICS/CPIM Certification Edition offers comprehensive preparation for the challenging CPIM exam with hundreds of practice exam questions and detailed case studies. In-depth coverage of manufacturing planning and control (MPC) best practices and the latest research gives you the competitive advantage in today's global manufacturing environment, and helps you to obtain the coveted CPIM designation. Covers the state of the art in manufacturing, including: Manufacturing planning and control Enterprise resource planning Demand management Forecasting Sales and operations planning Master production scheduling Material requirements planning Capacity planning and management Production activity control Advanced scheduling Just-in-time Distribution requirements planning Management of supply chain logistics Order point inventory control methods Strategy and MPC system design