Download or read book Barry s Introduction to Construction of Buildings written by Stephen Emmitt and published by John Wiley & Sons. This book was released on 2013-02-05 with total page 769 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition of Barry’s Introduction to Construction of Buildings adds considerable new material but remains based on the original concept of explaining construction technology through key functional/performance requirements for the main elements common to all buildings. Of particular note in this new edition are a fully integrated approach to environmental issues and construction sustainability. The rest of the material has been updated as required, with particular attention paid to the illustrations. With over 150 new photographs and many revised figures, plus a supporting website at www.wiley.com/go/barrysintroduction, students learning the fundamentals of building and construction on undergraduate and other NQF level 5 - 6 courses will find this the ideal introduction to the subject.
Download or read book Building Construction written by B.C. Punmia; Ashok Kumar Jain; Arun Kumar Jain and published by Firewall Media. This book was released on 2005-12 with total page 862 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Wood Frame House Construction written by L. O. Anderson and published by The Minerva Group, Inc.. This book was released on 2002 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual is the basic reference for anyone building or remodeling wood-frame houses. It has the practical information on modern building materials and methods that every builder needs to do professional-quality work.From the layout, excavation, and formwork, through finish carpentry, sheet metal and painting, every step of construction is covered in detail, with clear illustrations and step-by-step instructions. here you'll find everything you need to know about framing, roofing, siding, insulation and vapor barriers, interior finishing, floor coverings, millwork and cabinets, stairs, chimneys, driveways, walks ... complete how-to information on everything that goes into building a wood-frame house.A special section on estimating, with the building process laid out as a flow chart, will help you plan all the steps in residential construction, and to estimate each one quickly and accurately.
Download or read book Roof Construction Manual written by Eberhard Schunck and published by Birkhaüser. This book was released on 2003 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book is a vital reference work on the construction of pitched roofs. It offers extensive and fundamental information on all common types of roofing, and provides practical details for their construction".--BOOKJACKET.
Download or read book Barry s Introduction to Construction of Buildings written by Stephen Emmitt and published by John Wiley & Sons. This book was released on 2009-02-05 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: The five volume series, Barry's Construction of Buildings,has been established as a standard text on building technology formany years. However, a substantial update has long been required,and while doing this the opportunity has been taken to reduce fivevolumes to two in a more user-friendly format. The introductory volume covers domestic construction and bringstogether material from volumes 1, 2 and part of 5. The extensiverevision includes modern concepts on site assembly, environmentalissues and safety, and features further reading.
Download or read book Carpentry and Joinery written by Peter Brett and published by Nelson Thornes. This book was released on 2004 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by best-selling author Peter Breet, this new full-colour edition has been updated to match the revised carpentry and joinery qualifications.
Download or read book Constructing Architecture written by Andrea Deplazes and published by Springer Science & Business Media. This book was released on 2005-07-25 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in its second edition: the trailblazing introduction and textbook on construction includes a new section on translucent materials and an article on the use of glass.
Download or read book Fundamentals of Fire Fighter Skills written by David Schottke and published by Jones & Bartlett Publishers. This book was released on 2014 with total page 1229 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Fire Fighter Skills written by Iafc and published by Jones & Bartlett Publishers. This book was released on 2012-12-27 with total page 1229 pages. Available in PDF, EPUB and Kindle. Book excerpt: The National Fire Protection Association (NFPA) and the International Association of Fire Chiefs (IAFC) are pleased to bring you the third edition of Fundamentals of Fire Fighter Skills, the next step in the evolution of Fire Fighter I and Fire Fighter II training. The third edition covers the entire spectrum of the 2013 Edition of NFPA 1001: Standard for Fire Fighter Professional Qualifications, as well as the requirements for Operations level responders in the 2013 Edition of NFPA 472: Standard for Competence of Responders to Hazardous Materials/Weapons of Mass Destruction Incidents. From fire suppression to hazardous materials to emergency medical care, this one volume covers all of Fire Fighter I and Fire Fighter II training requirements. Important Notice: The digital edition of this book is missing some of the images or content found in the physical edition.
Download or read book Construction Technology written by Eric Fleming and published by John Wiley & Sons. This book was released on 2009-02-12 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new textbook provides a comprehensive introduction to everyaspect of the technology of low-rise construction. It includessub-structure (site work, setting out and foundations) andsuperstructure (flooring, roofs, finishes, fittings and fixtures).The material here covers the first year course requirement of allcourses on which construction technology is taught - no matter whatthe ultimate qualification. It offers tried and tested solutions to a range of constructionproblems and is organised following the sequence of construction.It will show what has been done in the past, demonstrating goodpractice - what works and what doesn't - and common faults. Thereare summaries of the more important BSI documents and reference tothe latest building regulations. Lengthy explanations are avoided by relying heavily on hundreds ofillustrations, pairing detail drawings with clear photographs toshow real life construction situations. The supporting spreadsheet referred to in the book can be found atthis linkhttp://www.blackwellpublishing.com/pdf/fleming/Fleming_spreadsheet.xls
Download or read book Wood frame House Construction written by LeRoy Oscar Anderson and published by . This book was released on 1970 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Agriculture Handbook written by and published by . This book was released on 1955 with total page 1480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Set includes revised editions of some nos.
Download or read book Cost Modelling written by M. Skitmore and published by Routledge. This book was released on 2005-11-04 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cost models underlie all the techniques used in construction cost and price forecasting, yet until relatively recently industry has been unfamiliar with their characteristics and properties. An understanding of the various types of cost model is vital to enable effective cost control and the development of future forecasting techniques. This volume brings together more than 20 seminal contributions to building cost modelling and introduces the major landmarks in progress and thinking in this field: * strategies and directions * explorations in cost modelling * cost-product/process modelling * dealing with uncertainty The strong techniques bias of this book will appeal to construction professionals involved in estimating, as well as researchers and students of building economics.
Download or read book Cost Modelling written by Martin Skitmore and published by Taylor & Francis. This book was released on 1999 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cost models underlie all the techniques used in construction cost and price forecasting. An understanding of the various types of models is vital to the success of forecasting, implications of design decisions and to effective cost control.
Download or read book NRM1 Cost Management Handbook written by David P Benge and published by Routledge. This book was released on 2014-06-13 with total page 651 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive guide to measurement and estimating using NRM1, written by the author of NRM1 The 'RICS New rules of measurement: Order of cost estimating and cost planning of capital building works' (referred to as NRM1) is the cornerstone of good cost management of capital building works projects - enabling more effective and accurate cost advice to be given to clients and other project team members, while facilitating better cost control. The NRM1 Cost Management Handbook is the essential guide to how to successfully interpret and apply these rules, including explanations of how to: quantify building works and prepare order of cost estimates and cost plans use the rules as a toolkit for risk management and procurement analyse actual costs for the purpose of collecting benchmark data and preparing cost analyses capture historical cost data for future order of cost estimates and elemental cost plans employ the rules to aid communication manage the complete 'cost management cycle' use the elemental breakdown and cost structures, together with the coding system developed for NRM1, to effectively integrate cost management with Building Information Modelling (BIM). In the NRM1 Cost Management Handbook, David Benge explains in clear terms how NRM1 is meant to be used in familiar quantity surveying tasks, as well as a range of activities of crucial importance for professionals in years to come. Worked examples, flow charts, diagrams, templates and check lists ensure readers of all levels will become confident and competent in the use of NRM1. This book is essential reading for anyone working with NRM1, and is the most authoritative guide to practice available for those preparing to join the industry.
Download or read book Inspections and Reports on Dwellings Inspecting written by Ian A. Melville and published by Taylor & Francis. This book was released on 2014-07-21 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the introduction of Home Information Packs and Home Condition Reports house buying is being revolutionised! This second book in the series of four, following Inspections and Reports on Dwellings: Assessing Age, covers the entire field of inspecting dwellings, from ascertaining the clients’ requirements, setting the instructions by way of agreeing the Conditions of Engagement for any one of the five types of report envisaged as being covered by the series, to the physical inspection itself. Desirable attributes in the surveyor are discussed – qualifications, necessary insurance cover, both in respect of liability for his work and his own person, together with his fees. Court cases determining the scope and level of inspection are given full consideration and there is a concentration on ascertaining, particularly in regard to age, the materials and forms of construction that make up each part of a dwelling, the structure, finishes, services and surroundings and its condition, all by means of sight, sound, feel and smell.
Download or read book Systems in Timber Engineering written by Josef Kolb and published by Springer Science & Business Media. This book was released on 2008-04-23 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: An indispensable standard work for everyone involved in building with wood. This work uses plans, schematic drawings, and pictures to show the current and forward-looking state of the technology as applied in Switzerland, a leading country in the field of timber construction.
