Download or read book Valves Piping and Pipelines Handbook written by T. Christopher Dickenson and published by Elsevier. This book was released on 1999 with total page 976 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hardbound. Over recent years, a number of significant developments in the application of valves have taken place: the increasing use of actuator devices, the introduction of more valve designs capable of reliable operation in difficult fluid handling situations; low noise technology and most importantly, the increasing attention being paid to product safety and reliability. Digital technology is making an impact on this market with manufacturers developing intelligent (smart) control valves incorporating control functions and interfaces. New metallic materials and coatings available make it possible to improve application ranges and reliability. New and improved polymers, plastic composite materials and ceramics are all playing their part. Fibre-reinforced plastic pipe systems, glass-reinforced epoxy pipe systems and the traditional low-cost polyester pipe systems have all undergone sophisticated design and manufacturing technology changes. The pote
Download or read book A Practical Guide to Piping and Valves for the Oil and Gas Industry written by Karan Sotoodeh and published by Gulf Professional Publishing. This book was released on 2021-01-30 with total page 984 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Practical Guide to Piping and Valves for the Oil and Gas Industry covers how to select, test and maintain the right oil and gas valve. Each chapter focuses on a specific type of valve with a built-in structured table on valve selection. Covering both onshore and offshore projects, the book also gives an introduction to the most common types of corrosion in the oil and gas industry, including CO2, H2S, pitting, crevice, and more. A model to evaluate CO2 corrosion rate on carbon steel piping is introduced, along with discussions on bulk piping components, including fittings, gaskets, piping and flanges. Rounding out with chapters devoted to valve preservation to protect against harmful environments and factory acceptance testing, this book gives engineers and managers a much-needed tool to better understand today's valve technology. Presents oil and gas examples and challenges relating to valves, including many illustrations from valves in different stages of projects Helps readers understand valve materials, testing, actuation, packing and preservation, also including a new model to evaluate CO2 corrosion rates on carbon steel piping Presents structured valve selection tables in each chapter to help readers pick the right valve for the right project
Download or read book Types of Valves in Piping written by Gustavo Cinca and published by Gustavo.m.Cinca. This book was released on 2018-12-07 with total page 65 pages. Available in PDF, EPUB and Kindle. Book excerpt: Types of Valves in Piping Types of Valves - Tables to Estimate Man-hours of Assembly Recommended for those who are new to the subject. This publication describes the traditional valves used in piping systems. The book includes, as a supplement, tables with records of man-hours required for the assembly of threaded, flange, butt welded and wafer valves. Valves are expensive mechanical devices that control the flow and pressure within a system or process and are essential components in any piping system that carries fluids In this manuscript are given the fundamental characteristics of the most used valves and the man-hours necessary for their assembly.
Download or read book Types of Valves in Piping written by Gustavo Cinca and published by Gustavo.m.Cinca. This book was released on 2020-05-21 with total page 65 pages. Available in PDF, EPUB and Kindle. Book excerpt: Types of Valves in Piping Types of Valves - Tables to estimate man-hours of assembly. This publication describes the types of traditional valves used in piping systems. The book includes, as a supplement, tables with records of man-hours required for the assembly of threaded, flange, butt welded and wafer valves. Valves are expensive mechanical devices that control the flow and pressure within a system or process and are essential components in any piping system that carries fluids. In this manuscript the main characteristics of the most used valves and the man-hours required for their assembly are indicated. Author Sites: https://calculatemanhours.com/ https://horashombre.com/
Download or read book Piping and Valves written by Frank R. Spellman and published by CRC Press. This book was released on 2001-08-31 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume in the Fundamentals for the Water and Wastewater Main Operator series covers the basics of piping and valves in water and wastewater plants, including details on fittings, strainers, filters, traps and control systems. The book explains how pipes and valves are used to feed materials (e.g., chemicals) into influents and effluents and also siphon off unwanted liquid and gaseous byproduct. Also covered is how pipes are developed into systems and subsystems and coordinated into a plant-wide functioning unit.
Download or read book A Practical Guide to Piping and Valves for the Oil and Gas Industry written by Karan Sotoodeh and published by Gulf Professional Publishing. This book was released on 2021-01-12 with total page 986 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Practical Guide to Piping and Valves for the Oil and Gas Industry covers how to select, test and maintain the right oil and gas valve. Each chapter focuses on a specific type of valve with a built-in structured table on valve selection. Covering both onshore and offshore projects, the book also gives an introduction to the most common types of corrosion in the oil and gas industry, including CO2, H2S, pitting, crevice, and more. A model to evaluate CO2 corrosion rate on carbon steel piping is introduced, along with discussions on bulk piping components, including fittings, gaskets, piping and flanges. Rounding out with chapters devoted to valve preservation to protect against harmful environments and factory acceptance testing, this book gives engineers and managers a much-needed tool to better understand today's valve technology. - Presents oil and gas examples and challenges relating to valves, including many illustrations from valves in different stages of projects - Helps readers understand valve materials, testing, actuation, packing and preservation, also including a new model to evaluate CO2 corrosion rates on carbon steel piping - Presents structured valve selection tables in each chapter to help readers pick the right valve for the right project
Download or read book Handbook of Valves Piping and Pipelines written by Ronald Horace Warring and published by Gulf Professional Publishing. This book was released on 1982 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Valves Piping Pipelines Handbook written by and published by . This book was released on 1986 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Military Standard written by United States. Navy Department and published by . This book was released on 1969 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Piping Materials Guide written by Peter Smith and published by Elsevier. This book was released on 2005-01-20 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: The only book of its kind on the market, this book is the companion to our Valve Selection Handbook, by the same author. Together, these two books form the most comprehensive work on piping and valves ever written for the process industries. This book covers the entire piping process, including the selection of piping materials according to the job, the application of the materials and fitting, trouble-shooting techniques for corrosion control, inspections for OSHA regulations, and even the warehousing, distributing, and ordering of materials. There are books on materials, fitting, OSHA regulations, and so on, but this is the only "one stop shopping" source for the piping engineer on piping materials.- Provides a "one stop shopping" source for the piping engineer on piping materials- Covers the entire piping process. - Designed as an easy-to-access guide
Download or read book Hydraulics of Pipelines written by J. Paul Tullis and published by John Wiley & Sons. This book was released on 1989-03-07 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive text/reference addresses all hydraulic aspects of pipeline design. Incorporates many real-life examples from the author's experience in the design and operation of pipelines. Topics covered include basic equations necessary to pipeline design, how to conduct a feasibility study and perform economic analysis, design considerations for pumps and valves, how to suppress cavitation, hydraulic transients, trapped air, and methods of numerical solution of governing equations (including applications to complex piping systems). Includes twenty-five tables for easy reference. Extensively illustrated.
Download or read book Pipe Fitting and Piping Handbook written by Louis Gary Lamit and published by Prentice Hall. This book was released on 1984 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Pipes and Piping written by and published by . This book was released on 1908 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Coating Application for Piping Valves and Actuators in Offshore Oil and Gas Industry written by Karan Sotoodeh and published by CRC Press. This book was released on 2022-09-14 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book looks at the applications of coating in piping, valves and actuators in the offshore oil and gas industry. Providing a key guide for professionals and students alike, it highlights specific coating standards within the industry, including ISO, NORSOK, SSPC and NACE. In the corrosive environment of a seawater setting, coatings to protect pipes, valves and actuators are essential. This book provides both the theory behind these coatings and practical applications, including case studies from multinational companies. It covers different offshore zones and their corrosivity level alongside the different types of external corrosion, such as stress cracking and hydrogen-induced stress cracking. The key coatings discussed are zinc-rich coatings, thermal spray zinc or aluminum, phenolic epoxy and passive fire protection, with a review of their defects and potential failures. The book also details the role of coating inspectors and explains how to diagnose faults. Case studies from companies such as Aker Solutions, Baker Hughes, Equinor and British Petroleum illustrate the wide range of industrial applications of coating technologies. This book is of interest to engineers and students in materials, coating, mechanical, piping or petroleum engineering.
Download or read book Community Well Test Program Phase I written by Bechtel Environmental, Inc and published by . This book was released on 1991 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Valves and Actuators written by Brian Nesbitt and published by Elsevier. This book was released on 2011-04-19 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industries that use pumps, seals and pipes will also use valves and actuators in their systems. This key reference provides anyone who designs, uses, specifies or maintains valves and valve systems with all of the critical design, specification, performance and operational information they need for the job in hand. Brian Nesbitt is a well-known consultant with a considerable publishing record. A lifetime of experience backs up the huge amount of practical detail in this volume.* Valves and actuators are widely used across industry and this dedicated reference provides all the information plant designers, specifiers or those involved with maintenance require* Practical approach backed up with technical detail and engineering know-how makes this the ideal single volume reference* Compares and contracts valve and actuator types to ensure the right equipment is chosen for the right application and properly maintained
Download or read book The Valve World written by and published by . This book was released on 1926 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt:
