Download or read book Natural Resources Code written by Texas and published by . This book was released on 1978 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to the Oil Pipeline Industry written by Nora Sheppard and published by Petroleum Extension Service. This book was released on 1984 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explains how pipelines daily move millions of barrels of crude oil and refined products in the United States. Reviews the history, development, and construction of petroleum pipelines and discusses gathering oil from the fields, operating pump stations, controlling oil movement, maintaining pipelines, and pipelining products. Also includes environmental considerations, special rules and regulations, and a glossary. Sponsored by the American Petroleum Institute, Transportation Department.
Download or read book Oil in the Sea III written by National Research Council and published by National Academies Press. This book was released on 2003-03-14 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the early 1970s, experts have recognized that petroleum pollutants were being discharged in marine waters worldwide, from oil spills, vessel operations, and land-based sources. Public attention to oil spills has forced improvements. Still, a considerable amount of oil is discharged yearly into sensitive coastal environments. Oil in the Sea provides the best available estimate of oil pollutant discharge into marine waters, including an evaluation of the methods for assessing petroleum load and a discussion about the concerns these loads represent. Featuring close-up looks at the Exxon Valdez spill and other notable events, the book identifies important research questions and makes recommendations for better analysis ofâ€"and more effective measures againstâ€"pollutant discharge. The book discusses: Inputâ€"where the discharges come from, including the role of two-stroke engines used on recreational craft. Behavior or fateâ€"how oil is affected by processes such as evaporation as it moves through the marine environment. Effectsâ€"what we know about the effects of petroleum hydrocarbons on marine organisms and ecosystems. Providing a needed update on a problem of international importance, this book will be of interest to energy policy makers, industry officials and managers, engineers and researchers, and advocates for the marine environment.
Download or read book Pipeline written by Dominique Morisseau and published by Concord Theatricals. This book was released on 2019 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nya, an inner-city public high school teacher, is committed to her students but desperate to give her only son Omari opportunities they’ll never have. When a controversial incident at his upstate private school threatens to get him expelled, Nya must confront his rage and her own choices as a parent. But will she be able to reach him before a world beyond her control pulls him away? With profound compassion and lyricism, Pipeline brings an urgent conversation powerfully to the fore. Morisseau pens a deeply moving story of a mother’s fight to give her son a future — without turning her back on the community that made him who he is.
Download or read book Hidden Costs of Energy written by National Research Council and published by National Academies Press. This book was released on 2010-05-26 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite the many benefits of energy, most of which are reflected in energy market prices, the production, distribution, and use of energy causes negative effects. Many of these negative effects are not reflected in energy market prices. When market failures like this occur, there may be a case for government interventions in the form of regulations, taxes, fees, tradable permits, or other instruments that will motivate recognition of these external or hidden costs. The Hidden Costs of Energy defines and evaluates key external costs and benefits that are associated with the production, distribution, and use of energy, but are not reflected in market prices. The damage estimates presented are substantial and reflect damages from air pollution associated with electricity generation, motor vehicle transportation, and heat generation. The book also considers other effects not quantified in dollar amounts, such as damages from climate change, effects of some air pollutants such as mercury, and risks to national security. While not a comprehensive guide to policy, this analysis indicates that major initiatives to further reduce other emissions, improve energy efficiency, or shift to a cleaner electricity generating mix could substantially reduce the damages of external effects. A first step in minimizing the adverse consequences of new energy technologies is to better understand these external effects and damages. The Hidden Costs of Energy will therefore be a vital informational tool for government policy makers, scientists, and economists in even the earliest stages of research and development on energy technologies.
Download or read book Pipeline Planning and Construction Field Manual written by E. Shashi Menon and published by Gulf Professional Publishing. This book was released on 1978-06-26 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pipeline Planning and Construction Field Manual aims to guide engineers and technicians in the processes of planning, designing, and construction of a pipeline system, as well as to provide the necessary tools for cost estimations, specifications, and field maintenance. The text includes understandable pipeline schematics, tables, and DIY checklists. This source is a collaborative work of a team of experts with over 180 years of combined experience throughout the United States and other countries in pipeline planning and construction. Comprised of 21 chapters, the book walks readers through the steps of pipeline construction and management. The comprehensive guide that this source provides enables engineers and technicians to manage routine auditing of technical work output relative to technical input and established expectations and standards, and to assess and estimate the work, including design integrity and product requirements, from its research to completion. Design, piping, civil, mechanical, petroleum, chemical, project production and project reservoir engineers, including novices and students, will find this book invaluable for their engineering practices. - Back-of-the envelope calculations - Checklists for maintenance operations - Checklists for environmental compliance - Simulations, modeling tools and equipment design - Guide for pump and pumping station placement
Download or read book Oil and Gas Production Handbook An Introduction to Oil and Gas Production written by Havard Devold and published by Lulu.com. This book was released on 2013 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Pipeline Risk Management Manual written by W. Kent Muhlbauer and published by Gulf Professional Publishing. This book was released on 2004 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here's the ideal tool if you're looking for a flexible, straightforward analysis system for your everyday design and operations decisions. This new third edition includes sections on stations, geographical information systems, "absolute" versus "relative" risks, and the latest regulatory developments. From design to day-to-day operations and maintenance, this unique volume covers every facet of pipeline risk management, arguably the most important, definitely the most hotly debated, aspect of pipelining today. Now expanded and updated, this widely accepted standard reference guides you in managing the risks involved in pipeline operations. You'll also find ways to create a resource allocation model by linking risk with cost and customize the risk assessment technique to your specific requirements. The clear step-by-step instructions and more than 50 examples make it easy. This edition has been expanded to include offshore pipelines and distribution system pipelines as well as cross-country liquid and gas transmission pipelines. The only comprehensive manual for pipeline risk management Updated material on stations, geographical information systems, "absolute" versus "relative" risks, and the latest regulatory developments Set the standards for global pipeline risk management
Download or read book Oil and Gas Pipelines in Nontechnical Language 2nd Edition written by Thomas O. Miesner and published by Pennwell Books. This book was released on 2020-07 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: A totally understandable view of pipeline inception, planning, construction, start-up, and operation.
Download or read book Corrosion Control in the Oil and Gas Industry written by Sankara Papavinasam and published by Gulf Professional Publishing. This book was released on 2018-11-13 with total page 1020 pages. Available in PDF, EPUB and Kindle. Book excerpt: The effect of corrosion in the oil industry leads to the failure of parts. This failure results in shutting down the plant to clean the facility. The annual cost of corrosion to the oil and gas industry in the United States alone is estimated at $27 billion (According to NACE International)-leading some to estimate the global annual cost to the oil and gas industry as exceeding $60 billion. In addition, corrosion commonly causes serious environmental problems, such as spills and releases. An essential resource for all those who are involved in the corrosion management of oil and gas infrastructure, Corrosion Control in the Oil and Gas Industry provides engineers and designers with the tools and methods to design and implement comprehensive corrosion-management programs for oil and gas infrastructures. The book addresses all segments of the industry, including production, transmission, storage, refining and distribution. Selects cost-effective methods to control corrosion Quantitatively measures and estimates corrosion rates Treats oil and gas infrastructures as systems in order to avoid the impacts that changes to one segment if a corrosion management program may have on others Provides a gateway to more than 1,000 industry best practices and international standards
Download or read book Corrosion Inhibitors in the Oil and Gas Industry written by Viswanathan S. Saji and published by John Wiley & Sons. This book was released on 2020-06-02 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides comprehensive coverage of corrosion inhibitors in the oil and gas industries Considering the high importance of corrosion inhibitor development for the oil and gas sectors, this book provides a thorough overview of the most recent advancements in this field. It systematically addresses corrosion inhibitors for various applications in the oil and gas value chain, as well as the fundamentals of corrosion inhibition and interference of inhibitors with co-additives. Corrosion Inhibitors in the Oil and Gas Industries is presented in three parts. The first part on Fundamentals and Approaches focuses on principles and processes in the oil and gas industry, the types of corrosion encountered and their control methods, environmental factors affecting inhibition, material selection strategies, and economic aspects of corrosion. The second part on Choice of Inhibitors examines corrosion inhibitors for acidizing processes, inhibitors for sweet and sour corrosion, inhibitors in refinery operations, high-temperature corrosion inhibitors, inhibitors for challenging corrosive environments, inhibitors for microbiologically influenced corrosion, polymeric inhibitors, vapor phase inhibitors, and smart controlled release inhibitor systems. The last part on Interaction with Co-additives looks at industrial co-additives and their interference with corrosion inhibitors such as antiscalants, hydrate inhibitors, and sulfide scavengers. -Presents a well-structured and systematic overview of the fundamentals and factors affecting corrosion -Acts as a handy reference tool for scientists and engineers working with corrosion inhibitors for the oil and gas industries -Collectively presents all the information available on the development and application of corrosion inhibitors for the oil and gas industries -Offers a unique and specific focus on the oil and gas industries Corrosion Inhibitors in the Oil and Gas Industries is an excellent resource for scientists in industry as well as in academia working in the field of corrosion protection for the oil and gas sectors, and will appeal to materials scientists, electrochemists, chemists, and chemical engineers.
Download or read book Processing of Heavy Crude Oils written by Ramasamy Marappa Gounder and published by . This book was released on 2019-12-18 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Practical Advances in Petroleum Processing written by Chang Samuel Hsu and published by Springer Science & Business Media. This book was released on 2007-01-10 with total page 894 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes topics not found together in books on petroleum processing: economics, automation, process modeling, online optimization, safety, environmental protection Combines overviews of petroleum composition, refinery processes, process automation, and environmental protection with comprehensive chapters on recent advances in hydroprocessing, FCC, lubricants, hydrogen management Gives diverse perspectives, both geographic and topical, because contributors include experts from eight different countries in North America, Europe and Asia, representing oil companies, universities, catalyst vendors, process licensors, consultants and engineering contractors
Download or read book Transportation Energy Data Book written by and published by . This book was released on 2005 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Analytical Techniques in the Oil and Gas Industry for Environmental Monitoring written by Melissa N. Dunkle and published by John Wiley & Sons. This book was released on 2020-09-01 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: A thorough introduction to environmental monitoring in the oil and gas industry Analytical Techniques in the Oil and Gas Industry for Environmental Monitoring examines the analytical side of the oil and gas industry as it also provides an overall introduction to the industry. You’ll discover how oil and natural gas are sourced, refined, and processed. You can learn about what’s produced from oil and natural gas, and why evaluating these sourced resources is important. The book discusses the conventional analyses for oil and natural gas feeds, along with their limitations. It offers detailed descriptions of advanced analytical techniques that are commercially available, plus explanations of gas and oil industry equipment and instrumentation. You’ll find technique descriptions supplemented with a list of references as well as with real-life application examples. With this book as a reference, you can prepare to apply specific analytical methods in your organization’s lab environment. Analytical Techniques can also serve as your comprehensive resource on key techniques in the characterization of oil and gas samples, within both refinery and environmental contexts. Understand of the scope of oil and gas industry techniques available Consider the benefits and limitations of each available process Prepare for applying analytical techniques in your lab See real examples and a list of references for each technique Read descriptions of off-line analytics, as well as on-line and process applications As a chemist, engineer, instructor, or student, this book will also expand your awareness of the role these techniques have in environmental monitoring and environmental impact assessments.
Download or read book Oil Spill Dispersants written by Committee on Understanding Oil Spill Dispersants: Efficacy and Effects and published by . This book was released on 2005 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Approximately 3 million gallons of oil or refined petroleum products are spilled into U.S. waters every year. Oil dispersants (chemical agents such as surfactants, solvents, and other compounds) are used to reduce the effect of oil spills by changing the chemical and physical properties of the oil. By enhancing the amount of oil that physically mixes into the water, dispersants can reduce the potential that a surface slick will contaminate shoreline habitats. Although called for in the Oil Pollution Act of 1990 as a tool for minimizing the impact of oil spills, the use of chemical dispersants has long been controversial. This book reviews the adequacy of existing information and ongoing research regarding the effectiveness of dispersants as an oil spill response technique, as well as the effect of dispersed oil on marine and coastal ecosystems. Oil Spill Dispersants also includes recommended steps for policy makers faced with making hard choices regarding the use of dispersants as part of spill contingency planning efforts or during actual spills.
Download or read book Corrosion in Systems for Storage and Transportation of Petroleum Products and Biofuels written by Alec Groysman and published by Springer Science & Business Media. This book was released on 2014-02-17 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book treats corrosion as it occurs and affects processes in real-world situations, and thus points the way to practical solutions. Topics described include the conditions in which petroleum products are corrosive to metals; corrosion mechanisms of petroleum products; which parts of storage tanks containing crude oils and petroleum products undergo corrosion; dependence of corrosion in tanks on type of petroleum products; aggressiveness of petroleum products to polymeric material; how microorganisms take part in corrosion of tanks and pipes containing petroleum products; which corrosion monitoring methods are used in systems for storage and transportation of petroleum products; what corrosion control measures should be chosen; how to choose coatings for inner and outer surfaces of tanks containing petroleum products; and how different additives (oxygenates, aromatic solvents) to petroleum products and biofuels influence metallic and polymeric materials. The book is of interest to corrosion engineers, materials engineers, oil and gas engineers, petroleum engineers, chemists, chemical engineers, mechanical engineers, failure analysts, scientists, and students, designers of tanks, pipelines and other systems for storage and transportation fuels, technicians. The book is of interest to corrosion engineers, materials engineers, oil and gas engineers, petroleum engineers, chemists, chemical engineers, mechanical engineers, failure analysts, scientists, and students, designers of tanks, pipelines and other systems for storage and transportation fuels, technicians. The book is of interest to corrosion engineers, materials engineers, oil and gas engineers, petroleum engineers, chemists, chemical engineers, mechanical engineers, failure analysts, scientists, and students, designers of tanks, pipelines and other systems for storage and transportation fuels, technicians.
