Download or read book Pipeline Structural Health Monitoring Using Macro fiber Composite Active Sensors written by Andrew B. Thien and published by . This book was released on 2006 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: The United States economy is heavily dependent upon a vast network of pipeline systems to transport and distribute the nation's energy resources. As this network of pipelines continues to age, monitoring and maintaining its structural integrity remains essential to the nation's energy interests. Numerous pipeline accidents over the past several years have resulted in hundreds of fatalities and billions of dollars in property damages. These accidents show that the current monitoring methods are not sufficient and leave a considerable margin for improvement. To avoid such catastrophes, more thorough methods are needed. As a solution, the research of this thesis proposes a structural health monitoring (SHM) system for pipeline networks. By implementing a SHM system with pipelines, their structural integrity can be continuously monitored, reducing the overall risks and costs associated with current methods. The proposed SHM system relies upon the deployment of macro fiber composite (MFC) patches for the sensor array. Because MFC patches are flexible and resilient, they can be permanently mounted to the curved surface of a pipeline's main body. From this location, the MFC patches are used to monitor the structural integrity of the entire pipeline. Two damage detection techniques, guided wave and impedance methods, were implemented as part of the proposed SHM system. However, both techniques utilize the same MFC patches. This dual use of the MFC patches enables the proposed SHM system to require only a single sensor array. The presented Lamb wave methods demonstrated the ability to correctly identify and locate the presence of damage in the main body of the pipeline system, including simulated cracks and actual corrosion damage. The presented impedance methods demonstrated the ability to correctly identify and locate the presence of damage in the flanged joints of the pipeline system, including the loosening of bolts on the flanges. In addition to damage to the actual pipeline itself, the proposed methods were used to demonstrate the capability of detecting deposits inside of pipelines. Monitoring these deposits can prevent clogging and other hazardous situations. Finally, suggestions are made regarding future research issues which are needed to advance this research. Because the research of this thesis has only demonstrated the feasibility of the techniques for such a SHM system, these issues require attention before any commercial applications can be realized.
Download or read book Pipeline Structural Health Monitoring Using Macro fiber Composite Active Sensors written by and published by . This book was released on 2006 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: The United States economy is heavily dependent upon a vast network of pipeline systems to transport and distribute the nation's energy resources. As this network of pipelines continues to age, monitoring and maintaining its structural integrity remains essential to the nation's energy interests. Numerous pipeline accidents over the past several years have resulted in hundreds of fatalities and billions of dollars in property damages. These accidents show that the current monitoring methods are not sufficient and leave a considerable margin for improvement. To avoid such catastrophes, more thorough methods are needed. As a solution, the research of this thesis proposes a structural health monitoring (SHM) system for pipeline networks. By implementing a SHM system with pipelines, their structural integrity can be continuously monitored, reducing the overall risks and costs associated with current methods. The proposed SHM system relies upon the deployment of macro fiber composite (MFC) patches for the sensor array. Because MFC patches are flexible and resilient, they can be permanently mounted to the curved surface of a pipeline's main body. From this location, the MFC patches are used to monitor the structural integrity of the entire pipeline. Two damage detection techniques, guided wave and impedance methods, were implemented as part of the proposed SHM system. However, both techniques utilize the same MFC patches. This dual use of the MFC patches enables the proposed SHM system to require only a single sensor array. The presented Lamb wave methods demonstrated the ability to correctly identify and locate the presence of damage in the main body of the pipeline system, including simulated cracks and actual corrosion damage. The presented impedance methods demonstrated the ability to correctly identify and locate the presence of damage in the flanged joints of the pipeline system, including the loosening of bolts on the flanges. In addition to damage to the actual pipeline itself, the proposed methods were used to demonstrate the capability of detecting deposits inside of pipelines. Monitoring these deposits can prevent clogging and other hazardous situations. Finally, suggestions are made regarding future research issues which are needed to advance this research. Because the research of this thesis has only demonstrated the feasibility of the techniques for such a SHM system, these issues require attention before any commercial applications can be realized.
Download or read book Pipeline Structural Health Monitoring Using Macro fiber Composite Active Sensors written by and published by . This book was released on 2006 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: The United States economy is heavily dependent upon a vast network of pipeline systems to transport and distribute the nation's energy resources. As this network of pipelines continues to age, monitoring and maintaining its structural integrity remains essential to the nation's energy interests. Numerous pipeline accidents over the past several years have resulted in hundreds of fatalities and billions of dollars in property damages. These accidents show that the current monitoring methods are not sufficient and leave a considerable margin for improvement. To avoid such catastrophes, more thorough methods are needed. As a solution, the research of this thesis proposes a structural health monitoring (SHM) system for pipeline networks. By implementing a SHM system with pipelines, their structural integrity can be continuously monitored, reducing the overall risks and costs associated with current methods. The proposed SHM system relies upon the deployment of macro-fiber composite (MFC) patches for the sensor array. Because MFC patches are flexible and resilient, they can be permanently mounted to the curved surface of a pipeline's main body. From this location, the MFC patches are used to monitor the structural integrity of the entire pipeline. Two damage detection techniques, guided wave and impedance methods, were implemented as part of the proposed SHM system. However, both techniques utilize the same MFC patches. This dual use of the MFC patches enables the proposed SHM system to require only a single sensor array. The presented Lamb wave methods demonstrated the ability to correctly identify and locate the presence of damage in the main body of the pipeline system, including simulated cracks and actual corrosion damage. The presented impedance methods demonstrated the ability to correctly identify and locate the presence of damage in the flanged joints of the pipeline system, including the loosening of bolts on the flanges. In addition to damage to the actual pipeline itself, the proposed methods were used to demonstrate the capability of detecting deposits inside of pipelines. Monitoring these deposits can prevent clogging and other hazardous situations. Finally, suggestions are made regarding future research issues which are needed to advance this research. Because the research of this thesis has only demonstrated the feasibility of the techniques for such a SHM system, these issues require attention before any commercial applications can be realized.
Download or read book Structural Health Monitoring with Piezoelectric Wafer Active Sensors written by Victor Giurgiutiu and published by Academic Press. This book was released on 2014-06-20 with total page 1025 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural Health Monitoring with Piezoelectric Wafer Active Sensors, Second Edition provides an authoritative theoretical and experimental guide to this fast-paced, interdisciplinary area with exciting applications across a range of industries. The book begins with a detailed yet digestible consolidation of the fundamental theory relating to structural health monitoring (SHM). Coverage of fracture and failure basics, relevant piezoelectric material properties, vibration modes in different structures, and different wave types provide all the background needed to understand SHM and apply it to real-world structural challenges. Moving from theory to experimental practice, the book then provides the most comprehensive coverage available on using piezoelectric wafer active sensors (PWAS) to detect and quantify damage in structures. Updates to this edition include circular and straight-crested Lamb waves from first principle, and the interaction between PWAS and Lamb waves in 1-D and 2-D geometries. Effective shear stress is described, and tuning expressions between PWAS and Lamb waves has been extended to cover axisymmetric geometries with a complete Hankel-transform-based derivation. New chapters have been added including hands-on SHM case studies of PWAS stress, strain, vibration, and wave sensing applications, along with new sections covering essential aspects of vibration and wave propagation in axisymmetric geometries. Comprehensive coverage of underlying theory such as piezoelectricity, vibration, and wave propagation alongside experimental techniques Includes step-by-step guidance on the use of piezoelectric wafer active sensors (PWAS) to detect and quantify damage in structures, including clear information on how to interpret sensor signal patterns Updates to this edition include a new chapter on composites and new sections on advances in vibration and wave theory, bringing this established reference in line with the cutting edge in this emerging area
Download or read book Sensors Algorithms and Applications for Structural Health Monitoring written by Bastien Chapuis and published by Springer. This book was released on 2017-11-15 with total page 105 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides insights into sensor development for structural health monitoring. Current technological advances mean that the field is changing rapidly, making standardization an ongoing challenge. As such, the book gathers several essential contributions in the area of sensor development, including macro-fiber composite sensors for crack detection and optical fiber Bragg gratings for flaw detection. It also discusses the use of the welds in the structure as sensors, and probability estimation of detection for various sensor configurations. In addition, it presents methods based on vibration signal variations to detect small defects in composite components or to monitor large structures. Last but not least, the book includes special structural health monitoring applications in industrial components such as a nuclear boiler support spines and industrial presses as well as in corrosion monitoring of pipes.
Download or read book New Trends in Structural Health Monitoring written by Wieslaw Ostachowicz and published by Springer Science & Business Media. This book was released on 2013-01-18 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: A motivation for structural health monitoring. Structural health monitoring of aircraft structures. Vibration-based damage diagnosis and monitoring of external loads.Statistical time series methods for vibration based structural health monitoring. Fiber optic sensors. Damage localisation using elastic waves propagation methods experimental techniques. Application for wind turbine blades. Experts actively working in structural health monitoring and control techniques present the current research, areas of application and tendencies for the future of this technology, including various design issues involved. Examples using some of the latest hardware and software tools, experimental data from small scale laboratory demonstrators and measurements made on real structures illustrate the book. It will be a reference for professionals and students in the areas of engineering, applied natural sciences and engineering management.
Download or read book Structural Health Monitoring written by N. Rajic and published by Materials Research Forum LLC. This book was released on 2021-04-15 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents recent advances regarding the inspection and monitoring of engineering structures; including bridges, buildings, aircraft and space structures, nuclear reactors and defense platforms. Among the techniques covered are UAV photogrammetry, strain monitoring, infrared detection, acoustic emission testing, residual stress measurements, fiber optical sensing, thermographic inspection, vibration analysis, piezoelectric sensing and ultrasonic testing. Keywords: Bridges, Buildings, Aircraft Structures, Space Structures, Nuclear Reactors, Defense Platforms, UAV Photogrammetry, Strain Monitoring, Infrared Detection, Acoustic Emission Testing, Residual Stress Measurements, Fiber Optical Sensing, Thermographic Inspection, Vibration Analysis, Piezoelectric Sensing, Ultrasonic Testing, Impact Damage, Anaerobic Reactor Performance, Geomembranes, Ossointegrated Implants, Fatigue Crack Growth, Accelerometer, Nonlinear Cable Bracing, Timber Utility Poles, Steel Pipes, Loosened Bolts on Pipes, IMU-based Motion Capture, CFRP Composites, Maglev Guideway Girder, Cable-Pylon Anchorage, Deep Learning Techniques.
Download or read book Structural Health Monitoring For Advanced Composite Structures written by M H Ferri Aliabadi and published by World Scientific. This book was released on 2017-12-18 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural health monitoring (SHM) is a relatively new and alternative way of non-destructive inspection (NDI). It is the process of implementing a damage detection and characterization strategy for composite structures. The basis of SHM is the application of permanent fixed sensors on a structure, combined with minimum manual intervention to monitor its structural integrity. These sensors detect changes to the material and/or geometric properties of a structural system, including changes to the boundary conditions and system connectivity, which adversely affect the system's performance.This book's primary focus is on the diagnostics element of SHM, namely damage detection in composite structures. The techniques covered include the use of Piezoelectric transducers for active and passive Ultrasonics guided waves and electromechanical impedance measurements, and fiber optic sensors for strain sensing. It also includes numerical modeling of wave propagation in composite structures. Contributed chapters written by leading researchers in the field describe each of these techniques, making it a key text for researchers and NDI practitioners as well as postgraduate students in a number of specialties including materials, aerospace, mechanical and computational engineering.
Download or read book Structural Health Monitoring of Composite Structures Using Fiber Optic Methods written by Ginu Rajan and published by CRC Press. This book was released on 2016-10-03 with total page 519 pages. Available in PDF, EPUB and Kindle. Book excerpt: This highly comprehensive, introductory book explains the basics of structural health monitoring aspects of composite structures. This book serve as an all-in-one reference book in which the reader can receive a basic understanding of composite materials, manufacturing methods, the latest types of optical fiber sensors used for structural health monitoring of composite structures, and demonstrated applications of the use of fiber sensors in a variety of composite material structures. The content draws upon the authors’ and distinguished contributors’ extensive research/teaching and industrial experience to fully cover the structural health monitoring of composite materials using fiber optic sensing methods.
Download or read book Experimental Vibration Analysis for Civil Structures written by Joel P. Conte and published by Springer. This book was released on 2017-10-11 with total page 926 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited volume presents selected contributions from the International Conference on Experimental Vibration Analysis of Civil Engineering Structures held in San Diego, California in 2017 (EVACES2017). The event brought together engineers, scientists, researchers, and practitioners, providing a forum for discussing and disseminating the latest developments and achievements in all major aspects of dynamic testing for civil engineering structures, including instrumentation, sources of excitation, data analysis, system identification, monitoring and condition assessment, in-situ and laboratory experiments, codes and standards, and vibration mitigation.
Download or read book Pipe Inspection Robots for Structural Health and Condition Monitoring written by Harutoshi Ogai and published by Springer. This book was released on 2017-11-02 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the state-of-the-art with regard to inline pipe investigation and structural health monitoring of pipes. The book begins with applications of pipe inspection robots, and goes on to discuss. robots that are developed for a mobile platform, various sensors employed to sense defects, and different data storage/communication systems employed for damage prognosis. The book also introduces smart materials and smart sensors for use in pipe inspection robots. The contents of this book will be useful to researchers and professionals alike. The structure of the book enables its use as a text in professional training and development coursework.
Download or read book Structural Health Monitoring 2006 written by Alfredo Güemes and published by DEStech Publications, Inc. This book was released on 2006 with total page 1458 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings of the Third European Workshop on Structural Health Monitoring held at the Conference Centre in Granada, Spain, in July of 2006 includes four keynote presentations and 170 technical papers written by an international group of contributors. Papers discuss technology and activities related to damage detection and evaluation in engin
Download or read book Sensor Technologies for Civil Infrastructures Volume 1 written by Jerome P. Lynch and published by Elsevier. This book was released on 2014-04-26 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sensors are used for civil infrastructure performance assessment and health monitoring, and have evolved significantly through developments in materials and methodologies. Sensor Technologies for Civil Infrastructure Volume I provides an overview of sensor hardware and its use in data collection. The first chapters provide an introduction to sensing for structural performance assessment and health monitoring, and an overview of commonly used sensors and their data acquisition systems. Further chapters address different types of sensor including piezoelectric transducers, fiber optic sensors, acoustic emission sensors, and electromagnetic sensors, and the use of these sensors for assessing and monitoring civil infrastructures. Developments in technologies applied to civil infrastructure performance assessment are also discussed, including radar technology, micro-electro-mechanical systems (MEMS) and nanotechnology. Sensor Technologies for Civil Infrastructure provides a standard reference for structural and civil engineers, electronics engineers, and academics with an interest in the field. Describes sensing hardware and data collection, covering a variety of sensors Examines fiber optic systems, acoustic emission, piezoelectric sensors, electromagnetic sensors, ultrasonic methods, and radar and millimeter wave technology Covers strain gauges, micro-electro-mechanical systems (MEMS), multifunctional materials and nanotechnology for sensing, and vision-based sensing and lasers
Download or read book Structural Health Monitoring Technologies and Next Generation Smart Composite Structures written by Jayantha Ananda Epaarachchi and published by CRC Press. This book was released on 2016-09-15 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to the increased use of composite materials in aerospace, energy, automobile, and civil infrastructure applications, concern over composite material failures has grown, creating a need for smart composite structures that are able to self-diagnose and self-heal. Structural Health Monitoring Technologies and Next-Generation Smart Composite Structures provides valuable insight into cutting-edge advances in SHM, smart materials, and smart structures. Comprised of chapters authored by leading researchers in their respective fields, this edited book showcases exciting developments in general embedded sensor technologies, general sensor technologies, sensor response interrogation and data communication, damage matrix formulation, damage mechanics and analysis, smart materials and structures, and SHM in aerospace applications. Each chapter makes a significant contribution to the prevention of structural failures by describing methods that increase safety and reduce maintenance costs in a variety of SHM applications.
Download or read book Fibre Optic Methods for Structural Health Monitoring written by Branko Glisic and published by John Wiley & Sons. This book was released on 2008-03-11 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of fibre optic sensors in structural health monitoring has rapidly accelerated in recent years. By embedding fibre optic sensors in structures (e.g. buildings, bridges and pipelines) it is possible to obtain real time data on structural changes such as stress or strain. Engineers use monitoring data to detect deviations from a structure’s original design performance in order to optimise the operation, repair and maintenance of a structure over time. Fibre Optic Methods for Structural Health Monitoring is organised as a step-by-step guide to implementing a monitoring system and includes examples of common structures and their most-frequently monitored parameters. This book: presents a universal method for static structural health monitoring, using a technique with proven effectiveness in hundreds of applications worldwide; discusses a variety of different structures including buildings, bridges, dams, tunnels and pipelines; features case studies which describe common problems and offer solutions to those problems; provides advice on establishing mechanical parameters to monitor (including deformations, rotations and displacements) and on placing sensors to achieve monitoring objectives; identifies methods for interpreting data according to construction material and shows how to apply numerical concepts and formulae to data in order to inform decision making. Fibre Optic Methods for Structural Health Monitoring is an invaluable reference for practising engineers in the fields of civil, structural and geotechnical engineering. It will also be of interest to academics and undergraduate/graduate students studying civil and structural engineering.
Download or read book Structural Health Monitoring System for Synthetic Hybrid and Natural Fiber Composites written by Mohammad Jawaid and published by Springer Nature. This book was released on 2020-12-05 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the basic principle and challenges of structural health monitoring system for natural fibre and the hybrid composites structural materials in industrial applications, such as building, automotive, aerospace and wind turbine. Structural health monitoring (SHM) has become crucial in evaluating the performance of structural application in recent trends, especially since it is in line with the high-tech strategy of Industry 4.0. It is a system that is operated in real time or in an online situation. Hence, it also has advantages for damage detection, damage localisation, damage assessment and life prediction compared to the non-destructive test (NDT) which is conducted offline. The book covers the monitoring of the composite materials in terms of structural properties and damage evaluation through modelling and prediction of failure in composite. It includes recent examples and real-world engineering application to illustrate the understanding of the current technology application. The book benefits lecturers, students, researchers, engineers and industrialist who are working in the civil, aerospace and wind turbine industries.
Download or read book Structural Health Monitoring written by Alessandro Pegoretti and published by SAE International. This book was released on 2018-11-20 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural Health Management (SHM) is a key part of the Integrated Vehicle Health Management (IVHM) approach, whose main aim is to develop an integrated end-to-end system to monitor the overall health of a vehicle. Structural Health Monitoring: Current State and Future Trends, edited by Professor Alessandro Pegoretti, a scholar from the University of Trento in Italy, introduces the reader to recent developments involved in health monitoring of aerospace structures. The chapters, represented by seminal SAE International technical papers, offer an overview of the most recent advances in the sensing techniques for SHM, analysis of SHM data and its applications in aerospace. SHM can allow a continuous in-service inspection of the vehicle, thus reducing the cost associated with manual inspection at predetermined time intervals. The availability of reliable information on the loading conditions and health state of structural components by the implementation of SHM can be beneficial for several reasons, such as: • To prevent catastrophic failure • To reduce the number and the cost of unnecessary inspections • To improve the design of structural parts, with a reduction of the weight and the costs of overdesigned components Structural Health Monitoring: Current State and Future Trends offers a unique perspective on this field.
