Download or read book Pipeline Integrity Management Under Geohazard Conditions written by Mamdouh M. Salama and published by . This book was released on 2020-01-10 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book on Pipeline Integrity Management Under Geohazard Conditions (PIMG), includes 42 peer-refereed papers prepared by key industry subject matter experts. The papers compile the results of extensive research as well as assemble pipeline operators' experiences in tackling geohazard challenges for both new and vintage pipelines. In addition to the experts' papers, the editors of the book prepared an introduction to each section that includes summary review of the different papers in the section. The papers are presented in 10 sections addressing all aspects of geohazard integrity management. The fi rst section highlights the geohazard impact on pipeline integrity. The next four sections focused on the geohazard demand and its management by addressing geohazard characterization, monitoring, management and mitigation. The following four sections focused on the strain capacity by addressing strain capacity predictions, management and monitoring. The last chapter tied both strain demand and capacity through structural reliability and risk assessment protocols. The information in this book is not only intended for use by pipeline designers and operators but it is expected to also be used by regulators and standards writing organizations. It is therefore, the intention of ASME to update this book on a regular basis as new data, case studies and advancement of the state of practice become available.
Download or read book Pipeline Geo environmental Design and Geohazard Management written by Moness Rizkalla and published by American Society of Mechanical Engineers. This book was released on 2008 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will serve as a valuable reference to widely applicable and critically important geoenvironmental topics for pipeline engineers worldwide. The topics covered are: route selection, open cut and elevated driver crossings, horizontal directional drilling, buoyancy control and geohazard management. Authored by a team of recognized specialists in their respective fields and with practical examples from experiences around the world, this book will provide generalists with working knowledge in the topics addressed to better define design, construction and integrity management issues and to identify practical solutions.
Download or read book Pipeline Safety written by and published by . This book was released on 2001 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Pipeline Design Construction written by Mo Mohitpour and published by American Society of Mechanical Engineers. This book was released on 2007 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: This third edition of this highly successful volume is fully updated and includes new information on buoyancy control, Trenchless Crossing methods, as well as on Compressor Fuel Calculations and Optimization, Hydrotesting and LPG Pipelining. This book offers straightforward, practical techniques for pipeline design and construction, making it an ideal professional reference, training tool, or comprehensive text. The authors present the various elements that make up a single-phase liquid and gas pipeline system, including how to design, construct, commission, and assess pipelines and related facilities. They discuss gas and liquid transmission, compression, pumps, protection and integrity, procurement services, and the management of pipeline projects. More complex specialty fluids are also covered, including CO2, H2, slurry and multi-products. (Publisher).
Download or read book Pipeline Integrity written by Ramesh Singh and published by Gulf Professional Publishing. This book was released on 2017-04-25 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pipeline engineers, operators, and plant managers are responsible for the safety of pipelines, facilities, and staying on top of regulatory compliance and maintenance. However, they frequently need reference materials to support their decision, and many new pipeline engineers and plant managers are responsible for major repairs and decisions yet do not have the proper reference to set a holistic integrity plan in place. Pipeline Integrity, Second Edition delivers necessary pipeline inspection methods, identification of hazard mechanisms, risk and consequence evaluations, and repair strategies. Covering relevant standards and processes for risk, assessment, and integrity management, this go-to reference provides the principles that guide these concepts enhanced with more critical regulatory information and easier organization betwen liquid and gas pipelines. More detailed information is provided on asset reliability, including risk-based inspection and other inspection prioritizing tools such as value-driven maintenance and evidence-based asset management. Pipeline Integrity, Second Edition continues to provide engineers and plants managers a vital resource for keeping their pipelines and facilities safe and efficient.
Download or read book Natural Gas Pipeline Safety written by Government Accountability Office and published by Createspace Independent Publishing Platform. This book was released on 2017-09-13 with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Pipeline Safety Improvement Act of 2002 established a risk-based program for gas transmission pipelines-the integrity management program. The program requires operators of natural and other gas transmission pipelines to identify "high consequence areas" where pipeline incidents would most severely affect public safety, such as those occurring in highly populated or frequented areas. Operators must assess pipelines in these areas for safety risks and repair or replace any defective segments. Operators must also submit data on performance measures to the Pipeline and Hazardous Materials Safety Administration (PHMSA). The 2002 act also directed GAO to assess this program's effects on public safety. Accordingly, we examined (1) the effect on public safety of the integrity management program and (2) PHMSA and state pipeline agencies' plans to oversee operators' implementation of program requirements. To fulfill these objectives, GAO interviewed 51 gas pipeline operators and surveyed all state pipeline agencies.
Download or read book The Theory of Materials Failure written by Richard M. Christensen and published by Oxford University Press. This book was released on 2013-03-14 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of the failure of materials - everything from metals to brittle ceramics.
Download or read book Pipeline Geohazards written by Moness Rizkalla and published by American Society of Mechanical Engineers. This book was released on 2018-09 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book is the retitled second edition of the ASME book "Pipeline Geo-Environmental Design and Geo-hazard Management" (Rizkalla, 2008)."--Introduction.
Download or read book Mitigation of Gas Pipeline Integrity Problems written by Mavis Sika Okyere and published by CRC Press. This book was released on 2020-10-04 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mitigation of Gas Pipeline Integrity Problems presents the methodology to enable engineers, experienced or not, to alleviate pipeline integrity problems during operation. It explains the principal considerations and establishes a common approach in tackling technical challenges that may arise during gas production. Covers third-party damage, corrosion, geotechnical hazards, stress corrosion cracking, off-spec sales gas, improper design or material selection, as-built flaws, improper operations, and leak and break detection Details various hazard mitigation options Offers tested concepts of pipeline integrity blended with recent research results, documented in a scholarly fashion to make it simple to the average reader This practical work serves the needs of advanced students, researchers, and professionals working in pipeline engineering and petrochemical industries.
Download or read book Metal Failures written by A. J. McEvily and published by John Wiley & Sons. This book was released on 2002 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: comprehensive coverage of both the "how" and "why" of metal failures Metal Failures gives engineers the intellectual tools and practical understanding needed to analyze failures from a structural point of view. Its proven methods of examination and analysis enable investigators to: * Reach correct, fact-based conclusions on the causes of metal failures * Present and defend these conclusions before highly critical bodies * Suggest design improvements that may prevent future failures Analytical methods presented include stress analysis, fracture mechanics, fatigue analysis, corrosion science, and nondestructive testing. Numerous case studies illustrate the application of basic principles of metallurgy and failure analysis to a wide variety of real-world situations. Readers learn how to investigate and analyze failures that involve: * Alloys and coatings * Brittle and ductile fractures * Thermal and residual stresses * Creep and fatigue * Corrosion, hydrogen embrittlement, and stress-corrosion cracking This useful professional reference is also an excellent learning tool for senior-level students in mechanical, materials, and civil engineering.
Download or read book Oil and Gas Pipelines written by R. Winston Revie and published by John Wiley & Sons. This book was released on 2015-04-01 with total page 856 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive and detailed reference guide on the integrity and safety of oil and gas pipelines, both onshore and offshore Covers a wide variety of topics, including design, pipe manufacture, pipeline welding, human factors, residual stresses, mechanical damage, fracture and corrosion, protection, inspection and monitoring, pipeline cleaning, direct assessment, repair, risk management, and abandonment Links modern and vintage practices to help integrity engineers better understand their system and apply up-to-date technology to older infrastructure Includes case histories with examples of solutions to complex problems related to pipeline integrity Includes chapters on stress-based and strain-based design, the latter being a novel type of design that has only recently been investigated by designer firms and regulators Provides information to help those who are responsible to establish procedures for ensuring pipeline integrity and safety
Download or read book Pipeline Geo environmental Design and Geohazard Management written by Moness Rizkalla and published by . This book was released on 2008 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will serve as a valuable reference to widely applicable and critically important geoenvironmental topics for pipeline engineers worldwide. The topics covered are: route selection, open cut and elevated driver crossings, horizontal directional drilling, buoyancy control and geohazard management.
Download or read book Abstract proceedings the 6th International symposium on natural hazard triggered technological accidents global perspectives for natech risk management written by NATIONAL UNIT FOR DISASTER RISK MANAGEMENT and published by Ana María Cruz, Shin-ichi Aoki, María Camila Suárez Paba, Jesús Sergei Durán Abella, Mauricio Romero Torres. This book was released on 2022-12-01 with total page 61 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Natech symposium has been taking place since 2015, as an initiative of professors Naomi Kato, Shin-ichi Aoki and Ana María Cruz, from Osaka University and Kyoto University respectively. The primary objective of these symposiums has been the promotion of scientific and interdisciplinary exchange of experiences, risk assessment methods and innovative risk reduction measures that address Natech events (industrial accidents caused by large-scale natural events). In its different versions it has had researchers and participants from different countries, allowing the integration of initiatives and efforts that have been developed in this regard. The first symposium was held in March 2015 at Osaka University, and was entitled: International Symposium on Natural Disaster Impacts to Large Industrial Parks, it was funded by the Graduate School of Osaka University, the Airport and Port Research Institute (SIP), the Disaster Prevention Research Institute, and Kyoto University, in cooperation with the Calamity Science Institute.The second version of the event entitled: Activities of Research Initiatives for Natural Disaster Prevention of Oil and Gas Spill in Industrial Parks was held again at Osaka University in 2016. In March 2017, symposium number three was organized by the Disaster Prevention Research Institute (DPRI) and took place at Kyoto University. On this occasion, it was approached from the perspective of a workshop on Natech risk management tools, with the aim of making a practical demonstration of some tools available for Natech risk assessment, risk mitigation and emergency operations’ planning for various types of natural hazards. The workshop was attended by participants from 12 countries, including experts, students and stakeholders involved in Natech disaster risk reduction and similar topics. During 2018, the event moved to Ispra, Italy, where the Joint Research Center (JRC) of the European Commission and the University of Bologna were the hosts. On this occasion, the fourth event was named Natech Risk Reduction at Large Industrial Parks. The fifth version of the Natech symposium was held in 2021, again organized by Osaka University and Kyoto University. On this occasion, given the restrictions derived from the COVID-19 pandemic, the event was held virtually. Currently, the publication of two volumes in the IDRIM Springer Nature Book Series is being issued, which will be released by the end of 2022. This year (2022) Colombia was the host country of the sixth version of the Natech symposium, which was developed in a hybrid way (face-to-face and virtual), being the first time that this event is held in the American continent. On this occasion, the organizers of the event were the National Unit for Disaster Risk Management (UNGRD), Osaka University, Kyoto University and the Disaster Prevention Research Institute (DPRI). This event focused on the exchange of research experiences and lessons learned related to risk management of technological accidents triggered by natural events (Natech), for their understanding and approach in the Colombian territory.
Download or read book Pipeline Transportation of Carbon Dioxide Containing Impurities written by Mo Mohitpour and published by American Society of Mechanical Engineers. This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pipeline systems are expected to play an increasingly important role in transporting carbon dioxide (CO2) captured from flue stacks to distant fields for sequestration purposes or for Enhanced Oil Recovery (EOR). The phase diagram for a CO2 stream is very sensitive to the level of impurities, and this in turn affects pipeline design and the boundaries within which CO2 pipelines can be operated, without affecting the facilities design as well as delivery conditions. This book brings together the entire spectrum of design and operating needs for a pipeline and network of facilities that would transport CO2 containing impurities safely, without adverse impact on people and the environment. Other pipeline books published by ASME Press include: Pipeline Design and Construction: A Practical Approach, Third Edition, by Mohitpour, Golshan & Murray (2007) Pipeline Operation and Maintenance: A Practical Approach, Second Edition, by Mohitpour, van Hardeveld, Peterson & Szabo (2010) Energy Supply and Pipeline Transportation: Challenges and Opportunities, by Mohitpour (2008) Pipeline Pumping and Compression Systems: A Practical Approach, by Mohitpour, Botros, & Van Hardeveld (2008) Pipeline Integrity Assurance: A Practical Approach, by Mohitpour, Murray, McManus & Colquhoun (2010) In addition to several volumes in the ASME Pipeline Engineering Monograph Series. Book jacket.
Download or read book Pipeline Risk Assessment written by W. Kent Muhlbauer and published by . This book was released on 2015-02-01 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: The optimum management of risks emerges from the best understanding of risks. Risk understanding is now available to all, via efficient and intuitive risk assessment. This book presents the definitive approach to assessing risks from pipelines?an approach that overcomes the limitations of previous methodologies.As the definitive approach, the methodology must:*Provide clarity?generating immediately useful information to decision-makers*Be comprehensive and complete*Capture and integrate real world processes*Dispel myths arising from risk assessment past practice*Remove unnecessary complexity that interferes with understanding risk*Be cost-effective to create, apply, and manage.As with the author?s previous works, the recommended methodology detailed here is a practical, easy-to-apply approach to measuring risks associated with operating any type of pipeline in any environment. Risk assessment need not be a complex academic exercise. It should be a straightforward practice, used by ? and useful to ? any and all stakeholders in a pipeline?s operation.Some specific features of the definitive approach include:*The three critical determinants of failure probability?exposure, mitigation, resistance.*Using inspection information directly, intuitively, and efficiently in a risk assessment.*Measuring damage potential separately from failure potential.*Automatic and intuitive incorporation of interacting threats?weaknesses overlapping failure mechanisms.*The role of time-to-failure estimation in modeling corrosion and cracking.*Using hazard zones to understand potential consequence scenarios.*Representing all possible consequence scenarios with a manageable set.*The best use?not the most common use?of historical incident statistics*The essential role of the risk profile?proper risk management cannot occur without it.*Conservatism?both P50 and P90+ risk assessments are needed.*Making the risk assessment readily expandable?it should ?get smarter? as new knowledge becomes available.Herein lies essential guidance for keeping pipelines safe: Improving risk knowledge, leading to superior risk management, leading to safer pipelines.
Download or read book Encyclopedic Dictionary of Pipeline Integrity written by John Tiratsoo and published by Clarion Technical Conferences LLC. This book was released on 2012-02-01 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a reference guide to the broad range of topics that fall under the umbrella of "pipeline integrity." It is a compilation of the common terms, concepts, technologies and methods that one is likely to encounter in study, research or practice in this specialized field. The definitions and explanations have been written in language accessible to the non-specialist, involving simplification of often complex concepts, so that the user may get a quick overview of a topic or term and understand perhaps "what questions next to ask." The relationships among and between many technical concepts are drawn clearly with hundreds of cross-references throughout the book. Profusely illustrated with almost 200 drawings, diagrams, charts and tables, more than 150 literature citations, and including more than 1,000 entries, Encyclopedic Dictionary of Pipeline Integrity will be a practical and oft-used companion to anyone involved in the pipeline industry.
Download or read book ICPTT 2009 written by Mohammad Najafi and published by . This book was released on 2009 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
