Download or read book Pipeline Geo environmental Design and Geohazard Management written by Moness Rizkalla and published by American Society of Mechanical Engineers. This book was released on 2008 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will serve as a valuable reference to widely applicable and critically important geoenvironmental topics for pipeline engineers worldwide. The topics covered are: route selection, open cut and elevated driver crossings, horizontal directional drilling, buoyancy control and geohazard management. Authored by a team of recognized specialists in their respective fields and with practical examples from experiences around the world, this book will provide generalists with working knowledge in the topics addressed to better define design, construction and integrity management issues and to identify practical solutions.
Download or read book Pipeline Geohazards written by Moness Rizkalla and published by American Society of Mechanical Engineers. This book was released on 2018-09 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book is the retitled second edition of the ASME book "Pipeline Geo-Environmental Design and Geo-hazard Management" (Rizkalla, 2008)."--Introduction.
Download or read book Oil and Gas Pipelines written by R. Winston Revie and published by John Wiley & Sons. This book was released on 2015-04-01 with total page 855 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive and detailed reference guide on the integrity and safety of oil and gas pipelines, both onshore and offshore Covers a wide variety of topics, including design, pipe manufacture, pipeline welding, human factors, residual stresses, mechanical damage, fracture and corrosion, protection, inspection and monitoring, pipeline cleaning, direct assessment, repair, risk management, and abandonment Links modern and vintage practices to help integrity engineers better understand their system and apply up-to-date technology to older infrastructure Includes case histories with examples of solutions to complex problems related to pipeline integrity Includes chapters on stress-based and strain-based design, the latter being a novel type of design that has only recently been investigated by designer firms and regulators Provides information to help those who are responsible to establish procedures for ensuring pipeline integrity and safety
Download or read book Pipeline Integrity Management Under Geohazard Conditions written by Mamdouh M. Salama and published by . This book was released on 2020-01-10 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book on Pipeline Integrity Management Under Geohazard Conditions (PIMG), includes 42 peer-refereed papers prepared by key industry subject matter experts. The papers compile the results of extensive research as well as assemble pipeline operators' experiences in tackling geohazard challenges for both new and vintage pipelines. In addition to the experts' papers, the editors of the book prepared an introduction to each section that includes summary review of the different papers in the section. The papers are presented in 10 sections addressing all aspects of geohazard integrity management. The fi rst section highlights the geohazard impact on pipeline integrity. The next four sections focused on the geohazard demand and its management by addressing geohazard characterization, monitoring, management and mitigation. The following four sections focused on the strain capacity by addressing strain capacity predictions, management and monitoring. The last chapter tied both strain demand and capacity through structural reliability and risk assessment protocols. The information in this book is not only intended for use by pipeline designers and operators but it is expected to also be used by regulators and standards writing organizations. It is therefore, the intention of ASME to update this book on a regular basis as new data, case studies and advancement of the state of practice become available.
Download or read book Risk and Reliability Analysis Theory and Applications written by Paolo Gardoni and published by Springer. This book was released on 2017-02-24 with total page 559 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a unique collection of contributions from some of the foremost scholars in the field of risk and reliability analysis. Combining the most advanced analysis techniques with practical applications, it is one of the most comprehensive and up-to-date books available on risk-based engineering. All the fundamental concepts needed to conduct risk and reliability assessments are covered in detail, providing readers with a sound understanding of the field and making the book a powerful tool for students and researchers alike. This book was prepared in honor of Professor Armen Der Kiureghian, one of the fathers of modern risk and reliability analysis.
Download or read book Risk Management Handbook written by Federal Aviation Administration and published by Simon and Schuster. This book was released on 2012-07-03 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: Every day in the United States, over two million men, women, and children step onto an aircraft and place their lives in the hands of strangers. As anyone who has ever flown knows, modern flight offers unparalleled advantages in travel and freedom, but it also comes with grave responsibility and risk. For the first time in its history, the Federal Aviation Administration has put together a set of easy-to-understand guidelines and principles that will help pilots of any skill level minimize risk and maximize safety while in the air. The Risk Management Handbook offers full-color diagrams and illustrations to help students and pilots visualize the science of flight, while providing straightforward information on decision-making and the risk-management process.
Download or read book Geohazard Integrity Management Program for Operating Pipelines written by Mark Leir and published by . This book was released on 2008* with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Terrain and Geohazard Challenges Facing Onshore Oil and Gas Pipelines written by Mike Sweeney and published by . This book was released on 2005 with total page 758 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objectives of the conference and this volume are: to share new thinking, to promote an engagement between pipeline designers, builders and operators, geoengineering and environmental specialists and client organisations; and to provide a library of exemplars of good practice.
Download or read book Design in Nature written by Adrian Bejan and published by Anchor. This book was released on 2013-01-08 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this groundbreaking book, Adrian Bejan takes the recurring patterns in nature—trees, tributaries, air passages, neural networks, and lightning bolts—and reveals how a single principle of physics, the constructal law, accounts for the evolution of these and many other designs in our world. Everything—from biological life to inanimate systems—generates shape and structure and evolves in a sequence of ever-improving designs in order to facilitate flow. River basins, cardiovascular systems, and bolts of lightning are very efficient flow systems to move a current—of water, blood, or electricity. Likewise, the more complex architecture of animals evolve to cover greater distance per unit of useful energy, or increase their flow across the land. Such designs also appear in human organizations, like the hierarchical “flowcharts” or reporting structures in corporations and political bodies. All are governed by the same principle, known as the constructal law, and configure and reconfigure themselves over time to flow more efficiently. Written in an easy style that achieves clarity without sacrificing complexity, Design in Nature is a paradigm-shifting book that will fundamentally transform our understanding of the world around us.
Download or read book Petroleum and Natural Gas Industries written by International Organization for Standardization and published by . This book was released on 2019 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This document specifies requirements and gives recommendations on the management of geohazard risks during the pipeline design, construction and operational periods. This document is applicable to all operators and pipelines (existing and proposed/under construction). This document applies to onshore gathering and transmission pipelines used in the petroleum and natural gas industries."--Page 1.
Download or read book Underground Sensing written by Sibel Pamukcu and published by Academic Press. This book was released on 2017-11-01 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: Underground Sensing: Monitoring and Hazard Detection for Environment and Infrastructure brings the target audience the technical and practical knowledge of existing technologies of subsurface sensing and monitoring based on a classification of their functionality. In addition, the book introduces emerging technologies and applications of sensing for environmental and geo-hazards in subsurface – focusing on sensing platforms that can enable fully distributed global measurements. Finally, users will find a comprehensive exploration of the future of underground sensing that can meet demands for preemptive and sustainable response to underground hazards. New concepts and paradigms based on passively powered and/or on-demand activated, embeddable sensor platforms are presented to bridge the gap between real-time monitoring and global measurements. Presents a one-stop-shop reference for underground sensing and monitoring needs that saves valuable research time Provides application cases for all technologies that are covered and described in detail Includes full, four color images of equipment and applications Designed to cover a wide variety of underground sensors, from agriculture to geohazards
Download or read book Metal Failures written by A. J. McEvily and published by John Wiley & Sons. This book was released on 2002 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: comprehensive coverage of both the "how" and "why" of metal failures Metal Failures gives engineers the intellectual tools and practical understanding needed to analyze failures from a structural point of view. Its proven methods of examination and analysis enable investigators to: * Reach correct, fact-based conclusions on the causes of metal failures * Present and defend these conclusions before highly critical bodies * Suggest design improvements that may prevent future failures Analytical methods presented include stress analysis, fracture mechanics, fatigue analysis, corrosion science, and nondestructive testing. Numerous case studies illustrate the application of basic principles of metallurgy and failure analysis to a wide variety of real-world situations. Readers learn how to investigate and analyze failures that involve: * Alloys and coatings * Brittle and ductile fractures * Thermal and residual stresses * Creep and fatigue * Corrosion, hydrogen embrittlement, and stress-corrosion cracking This useful professional reference is also an excellent learning tool for senior-level students in mechanical, materials, and civil engineering.
Download or read book Pipeline Risk Assessment written by W. Kent Muhlbauer and published by . This book was released on 2015-02-01 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: The optimum management of risks emerges from the best understanding of risks. Risk understanding is now available to all, via efficient and intuitive risk assessment. This book presents the definitive approach to assessing risks from pipelines?an approach that overcomes the limitations of previous methodologies.As the definitive approach, the methodology must:*Provide clarity?generating immediately useful information to decision-makers*Be comprehensive and complete*Capture and integrate real world processes*Dispel myths arising from risk assessment past practice*Remove unnecessary complexity that interferes with understanding risk*Be cost-effective to create, apply, and manage.As with the author?s previous works, the recommended methodology detailed here is a practical, easy-to-apply approach to measuring risks associated with operating any type of pipeline in any environment. Risk assessment need not be a complex academic exercise. It should be a straightforward practice, used by ? and useful to ? any and all stakeholders in a pipeline?s operation.Some specific features of the definitive approach include:*The three critical determinants of failure probability?exposure, mitigation, resistance.*Using inspection information directly, intuitively, and efficiently in a risk assessment.*Measuring damage potential separately from failure potential.*Automatic and intuitive incorporation of interacting threats?weaknesses overlapping failure mechanisms.*The role of time-to-failure estimation in modeling corrosion and cracking.*Using hazard zones to understand potential consequence scenarios.*Representing all possible consequence scenarios with a manageable set.*The best use?not the most common use?of historical incident statistics*The essential role of the risk profile?proper risk management cannot occur without it.*Conservatism?both P50 and P90+ risk assessments are needed.*Making the risk assessment readily expandable?it should ?get smarter? as new knowledge becomes available.Herein lies essential guidance for keeping pipelines safe: Improving risk knowledge, leading to superior risk management, leading to safer pipelines.
Download or read book Earth Science for Civil and Environmental Engineers written by Richard E. Jackson and published by Cambridge University Press. This book was released on 2019-01-24 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduces the fundamental principles of applied Earth science needed for engineering practice, with case studies, exercises, and online solutions.
Download or read book Geotechnical Instrumentation written by National Research Council (U.S.). Transportation Research Board and published by Transportation Research Board National Research. This book was released on 1988 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Foundation Design Principles and Practices written by Donald P. Coduto and published by Pearson Higher Ed. This book was released on 2013-10-03 with total page 889 pages. Available in PDF, EPUB and Kindle. Book excerpt: For undergraduate/graduate-level foundation engineering courses. Covers the subject matter thoroughly and systematically, while being easy to read. Emphasizes a thorough understanding of concepts and terms before proceeding with analysis and design, and carefully integrates the principles of foundation engineering with their application to practical design problems.
Download or read book Engineering for Sustainable Development written by International Centre for Engineering Education and published by UNESCO Publishing. This book was released on 2021-03-02 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: The report highlights the crucial role of engineering in achieving each of the 17 SDGs. It shows how equal opportunities for all is key to ensuring an inclusive and gender balanced profession that can better respond to the shortage of engineers for implementing the SDGs. It provides a snapshot of the engineering innovations that are shaping our world, especially emerging technologies such as big data and AI, which are crucial for addressing the pressing challenges facing humankind and the planet. It analyses the transformation of engineering education and capacity-building at the dawn of the Fourth Industrial Revolution that will enable engineers to tackle the challenges ahead. It highlights the global effort needed to address the specific regional disparities, while summarizing the trends of engineering across the different regions of the world.
