Download or read book Freight Pipelines written by Henry Liu and published by CRC Press. This book was released on 1990 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Among the topics covered at the symposium were: slurry pipelines, pneumatic pipelines and capsule pipelines. There were also a number of papers presented on the subject of pipelines in general.
Download or read book Advances in Slurry Technology written by Trevor Frank Jones and published by BoD – Books on Demand. This book was released on 2023-11-02 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by experts from around the world, this book presents a comprehensive overview of slurry technology. The editor is grounded in the science of dilute concentrations of coarse particles in horizontal ducts, including settling distributions, critical deposition, swirling flow, and the two-layer model. This volume includes ten chapters that address such topics as process modelling, measurement (including non-Newtonian rheology), high-concentration conveying, vertical transport of fine-particle slurries, rheometry of sludges, pipe wear, and wastewater applications. There is also a chapter on an application at the fringe of our subject: fluidisation.
Download or read book Rheology of Paste in Metal Mines written by Aixiang Wu and published by Springer Nature. This book was released on 2022-04-01 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book investigates the rheology of paste in metal mines, which is beneficial for cemented paste backfill (CPB) technology. This book establishes a theory frame of paste rheology, including measurement of the rheological properties of paste, rheological behavior of full tailings in deep thickening, rheological behavior of paste in the mixing process, rheological behavior of paste in pipeline transportation, and rheological behavior of filling body. It aims to promote the development of paste theory, the innovation of CPB technology, and the research and development of CPB equipment to accelerate the construction of green mines based on CPB. This book is intended for researchers, designers, and engineering technicians. This book can also be a textbook for postgraduate students on mining engineering and other related subjects.
Download or read book Non Newtonian Flow and Applied Rheology written by R. P. Chhabra and published by Butterworth-Heinemann. This book was released on 2011-04-08 with total page 535 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book bridges the gap between the theoretical work of the rheologist, and the practical needs of those who have to design and operate the systems in which these materials are handled or processed. It is an established and important reference for senior level mechanical engineers, chemical and process engineers, as well as any engineer or scientist who needs to study or work with these fluids, including pharmaceutical engineers, mineral processing engineers, medical researchers, water and civil engineers. This new edition covers a considerably broader range of topics than its predecessor, including computational fluid dynamics modelling techniques, liquid/solid flows and applications to areas such as food processing, among others. - Written by two of the world's leading experts, this is the only dedicated non-Newtonian flow reference in print. - Since first publication significant advances have been made in almost all areas covered in this book, which are incorporated in the new edition, including developments in CFD and computational techniques, velocity profiles in pipes, liquid/solid flows and applications to food processing, and new heat/mass transfer methods and models. - Covers both basic rheology and the fluid mechanics of NN fluids - a truly self-contained reference for anyone studying or working with the processing and handling of fluids
Download or read book Bubbles Drops and Particles in Non Newtonian Fluids written by Raj P. Chhabra and published by CRC Press. This book was released on 2023-08-31 with total page 733 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides thorough coverage of the scientific foundations and the latest advances in particle motion in non-Newtonian media. Proveds a new detailed section on the effect of confinement on heat transfer from bluff-bodies Demonstrates how dynamic behavior of single particles can yield useful information for modeling transport processes in complex multiphase flows. Addresses heat transfer in viscoplastic fluids throughout the entire book. Highlights qualitative differences between the response of a Newtonian and non-Newtonian fluids in the complex flows encountered in processing applications
Download or read book Design of Slurry Transport Systems written by B.E.A. Jacobs and published by CRC Press. This book was released on 2003-09-02 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book benefits users, manufacturers and engineers by drawing together an overall view of the technology. It attempts to give the reader an appreciation of the extent to which slurry transport is presently employed, the theoretical basis for pipeline design, the practicalities of design and new developments.
Download or read book Non Newtonian Flow in the Process Industries written by R. P. Chhabra and published by Butterworth-Heinemann. This book was released on 1999 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: Non-Newtonian fluid behaviour; Rheometry for non-Newtonian fluids; Flow in pipes and conduits of non-circular cross-sections; Flow of multi-phase mixtures in pipes; Particulate systems; Heat transfer characteristics of non-Newtonian fluids in pipes; Momentum, heat and mass transfer in boundary layers; Liquid mixing.
Download or read book Bubbles Drops and Particles in Non Newtonian Fluids written by R.P. Chhabra and published by CRC Press. This book was released on 2006-07-25 with total page 801 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bubbles, Drops, and Particles in Non-Newtonian Fluids, Second Edition continues to provide thorough coverage of the scientific foundations and the latest advances in particle motion in non-Newtonian media. The book demonstrates how dynamic behavior of single particles can yield useful information for modeling transport processes in complex multipha
Download or read book Non Newtonian Flow written by R. P. Chhabra and published by Elsevier. This book was released on 1999-08-19 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: Non-Newtonian materials are encountered in virtually all of the chemical and process industries and a full understanding of their nature and flow characteristics is an essential requirement for engineers and scientists involved in their formulation and handling. This book will bridge the gap between much of the highly theoretical and mathematically complex work of the rheologist and the practical needs of those who have to design and operate plants in which these materials are handled and processed. At the same time, numerous references are included for the benefit of those who need to delve more deeply into the subject.The starting point for any work on non-newtonian fluids is their characterisation over the range of conditions to which they are likely to be subjected during manufacture or utilisation, and this topic is treated early on in the book in a chapter commissioned from an expert in the field of rheological measurements. Coverage of topics is extensive and this book offers a unique and rich selection of material including the flow of single phase and multiphase mixtures in pipes, in packed and fluidised bed systems, heat and mass transfer in boundary layers and in simple duct flows, and mixing etc.An important and novel feature of the book is the inclusion of a wide selection of worked examples to illustrate the methods of calculation. It also incorporates a large selection of problems for the reader to tackle himself.
Download or read book CJChE written by and published by . This book was released on 2002-02 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Essential Readings in Light Metals Alumina and Bauxite written by Don Donaldson and published by John Wiley & Sons. This book was released on 2013-04-05 with total page 1195 pages. Available in PDF, EPUB and Kindle. Book excerpt: ONE OF A FOUR-BOOK COLLECTION SPOTLIGHTING CLASSIC ARTICLES Five decades of landmark original research findings andreviews Highlighting some of the most important findings reported overthe past five decades, this volume features some of the besttechnical papers published on alumina and bauxite from 1963 to2011. Papers have been divided into thirteen subject sections forease of access. Each section has a brief introduction and a list ofrecommended articles for researchers interested in exploring eachsubject in greater depth. Only about fifteen percent of the alumina and bauxite papersever published in Light Metals were chosen for this volume.Selection was based on a rigorous review process. Among the papers,readers will find landmark original research findings and expertreviews summarizing current thinking on key topics at the time ofpublication. From basic research to advanced applications, the articlespublished in this volume collectively represent our body ofknowledge in alumina and bauxite. Students, scientists, andengineers should turn to this volume to discover the historicaldevelopment of alumina and bauxite research as well as the currentstate of the science and the technology. Moreover, the paperspublished in this volume will serve as a springboard for futureresearch and discoveries.
Download or read book Slurry Flow written by C A Shook and published by Elsevier. This book was released on 2013-10-22 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Slurry Flow: Principles and Practice describes the basic concepts and methods for understanding and designing slurry flow systems, in-plan installations, and long-distance transportation systems. The goal of this book is to enable the design or plant engineer to derive the maximum benefit from a limited amount of test data and to generalize operating experience to new situations. Design procedures are described in detail and are accompanied by illustrative examples needed by engineers with little or no previous experience in slurry transport. The technical literature in this field is extensive: this book facilitates its use by surveying current research results and providing explanations of mechanistic flow models. This discussion of background scientific principles helps the practitioner to better interpret test data, select pumps, specify materials of construction, and choose measuring devises for slurry transport systems. The extensive range of topics covered in Slurry Flow: Principles and practice includes slurry rheology, homogeneous and heterogeneous slurry flow principles, wear mechanisms, pumping equipment, instrumentation, and operating aspects.
Download or read book Slurry Handling written by N.P. Brown and published by Springer Science & Business Media. This book was released on 1991-12-31 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Clays in the Mineral Processing Value Chain written by Markus Gräfe and published by Cambridge University Press. This book was released on 2017-08-31 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: A review of the issues surrounding clays in the mineral processing value chain, from mining to processing and waste disposal.
Download or read book Underground Mining Methods written by W. A. Hustrulid and published by SME. This book was released on 2001 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt: Underground Mining Methods presents the latest principles and techniques in use today. Reflecting the international and diverse nature of the industry, a series of mining case studies is presented covering the commodity range from iron ore to diamonds extracted by operations located in all corners of the world. Industry experts have contributed 77 chapters. This book is certain to become a standard for every practicing mining engineer and student alike. Sections include: General Mine Design Considerations, Room-and-Pillar Mining of Hard Rock/Soft Rock, Longwall Mining of Hard Rock, Shrinkage Stoping, Sublevel Stoping, Cut-and-Fill Mining, Sublevel Caving, Panel Caving, Foundations for Design, and Underground Mining Looks to the Future.
Download or read book Tailings and Mine Waste 08 written by The Organizing Committee of the 12th International Conference on Tailings and Mine Waste and published by CRC Press. This book was released on 2008-11-17 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tailings and Mine Waste08 contains papers from the twelfth annual Tailings and Mine Waste Conference, held by Colorado State University of Fort Collins, Colorado. The purpose of this series of conferences is to provide a forum for discussion and establishment of dialogue among all people in the mining industry and environmental community regardin
Download or read book Multiphase Flow Handbook Second Edition written by Efstathios Michaelides and published by CRC Press. This book was released on 2016-10-26 with total page 1559 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Multiphase Flow Handbook, Second Edition is a thoroughly updated and reorganized revision of the late Clayton Crowe’s work, and provides a detailed look at the basic concepts and the wide range of applications in this important area of thermal/fluids engineering. Revised by the new editors, Efstathios E. (Stathis) Michaelides and John D. Schwarzkopf, the new Second Edition begins with two chapters covering fundamental concepts and methods that pertain to all the types and applications of multiphase flow. The remaining chapters cover the applications and engineering systems that are relevant to all the types of multiphase flow and heat transfer. The twenty-one chapters and several sections of the book include the basic science as well as the contemporary engineering and technological applications of multiphase flow in a comprehensive way that is easy to follow and be understood. The editors created a common set of nomenclature that is used throughout the book, allowing readers to easily compare fundamental theory with currently developing concepts and applications. With contributed chapters from sixty-two leading experts around the world, the Multiphase Flow Handbook, Second Edition is an essential reference for all researchers, academics and engineers working with complex thermal and fluid systems.
