Download or read book Piling in Chalk written by N. B. Hobbs and published by . This book was released on 1979 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Piling in Chalk written by N. B. Hobbs and published by . This book was released on 1979 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Shaft Friction of CFA Piles in Chalk written by J. A. Lord and published by . This book was released on 2003 with total page 62 pages. Available in PDF, EPUB and Kindle. Book excerpt: CIRIA and member firms of the Federation of Piling Specialists (FPS) collaborated in instituting this research, in order to: - obtain and analyse new CFA pile test results in chalk, - re-examine the pile test data available at the time PR11 was written, - review whether the published value of b is conservative, - explore the factors that affect it, - refine design recommendations. This book makes recommendations for the design of shaft resistance of CFA piles in low- and medium- density chalk. It is not appropriate to the design of piles constructed by any other method. The report contains the graphical plots and analyses of pile test data and reviews some design aspects of continuous flight augered piles in chalk. Contents: 1 Introduction, 2 Analysis of results, 3 Identification of chalk with a low unit shaft resistance, 4 Pile testing and factors of safety, 5 Conclusions and recommendations, References, Appendix 1 Examination of exposed shaft of CFA piles, Appendix 2 Site investigation methods appropriate for CFA piling in chalk, Appendix 3 CFA piles in chalk pile load test information check list.
Download or read book Piling Engineering Third Edition written by Ken Fleming and published by CRC Press. This book was released on 2008-09-25 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: Piling is a fast moving field and recent years have seen major advances in theory, methods, testing procedures and equipment. Some of these changes have been driven by the need for economies and efficiency, reduced spoil production and new methods of pile bore support. Advances in theoretical analyses allow pile design to be refined so that piles and pile groups perform to better advantage. This third edition of the well established book has been comprehensively updated. It provides an accessible and well-illustrated account of design techniques, methods of testing and analysis of piles, with a marked emphasis on practice but with design methods that incorporate the most recent advances in piling theory. Piling Engineering is written for geotechnical engineers, consultants and foundation contractors. It is also a useful reference for academics and advanced students on courses in piling, practical site investigation and foundation design and construction.
Download or read book Application of Stress wave Theory to Piles written by Frans B. J. Barends and published by Taylor & Francis. This book was released on 2022-06-03 with total page 737 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprising 97 papers on Geotechnical & environmental aspects (Pile-soil modelling, vibrations); Dynamic testing (Equipment & data acquisition systems); Performance during installation (Driving equipment, hammer-pile-soil system); Reliability of predictions (Theory versus experiment and simulation). Each part starts with a lecture by invited keynote speakers; followed by a general report on the papers. New themes considered are environmental aspects related to vibration and noise & the reliability of predictions emphasizing the validation of theoretical methods & practical experience.
Download or read book Piling European Practice and Worldwide Trends written by Institution of Civil Engineers (Great Britain) and published by Thomas Telford. This book was released on 1992 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: Authors from throughout Europe have contributed to this book, which covers the design advances in piling practice, performance testing and innovations in piling systems, piling systems employed in different European countries, trends and technologies and research and developments, taking into account geographical and soil conditions as they determine the state of the art.
Download or read book Pile Design and Construction Practice written by Willis H. Thomas and published by CRC Press. This book was released on 2007-12-06 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: This international handbook is essential for geotechnical engineers and engineering geologists responsible for designing and constructing piled foundations. It explains general principles and practice and details current types of pile, piling equipment and methods. It includes calculations of the resistance of piles to compressive loads, pile group
Download or read book Design of Axially Loaded Piles European Practice written by F. De Cock and published by CRC Press. This book was released on 2020-12-18 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is unique on the subject because it is not so much a collection of individual work, but basically comprising national reports from most European countries on the present-day design methods, as prescribed in more or less strict national codes or recommendations and so daily used in practice by consulting engineers and contractors. As far as already implemented, the application of these methods within the framework of Eurocode 7 is described as well. In order to improve the understanding of the design methods, the national papers also consider aspects such as the local piling practice, limitations of the design methods, some practical examples and particular national experiences. The proceedings also include the contributions of two invited speakers as well as those of the three session discussion leaders, focusing on some particular aspects with regards to pile design. The book is of particular interest for those who are involved with pile design in practice, consulting engineers, piling contractors, control organisms as well as those dealing with geotechnical normalisation and research work.
Download or read book Underpinning and Retention written by S. THORBURN AND G. S. LITTLEJOHN and published by Springer. This book was released on 2013-12-17 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Underpinning and Retention written by S. Thorburn and published by CRC Press. This book was released on 1992-11-12 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Various underpinning methods exist, and choosing a particular method or selection of methods is the job of the engineer. Consistent with the underpinning procedure is the need to retain the affected structure plus the surrounding ground and/or buildings. This book will offer advice on how to chose the correct procedure.
Download or read book Penetration Testing volume 1 written by A. Verruijt and published by Routledge. This book was released on 2021-02-25 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: Conference Proceedings of the second European symposium on penetration testing, Amsterdam, 24-27 May 1982. This volume includes soil penetration tests- congresses.
Download or read book Piling and Deep Foundations written by J. B. Burland and published by CRC Press. This book was released on 1989 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Piling Engineering written by W. G. K. Fleming and published by John Wiley & Sons. This book was released on 1985-04-05 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive reference guide to current principles and practices in piling. Offers engineers the best current thinking on a range of issues, methods, and techniques, including ground conditions and site preparation; pile types and systems; analysis and design methods; pile testing, quality assurance, and performance; and cost-related issues.
Download or read book Engineering in Chalk written by J. A. Lord and published by . This book was released on 2002 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides guidance on engineering in chalk. It describes the chalk's geological setting, its origins, occurrence, its stratigraphy, weathering and geomorphological situations, the material and mechanical properties. The descriptions are supported by a comprehensive set of photographs. It explains recommended schemes for the engineering description and classification of chalk, building on the work presented in CIRIA PR11, 'Foundations in Chalk'. The publication looks at the mechanical and material properties of intact, in-situ and compacted chalk and considers their implications for the design and construction of earthworks, cuttings, retaining walls and anchorages. Major sections deal with the selection and design of shallow and piled foundations. Based on analysis of the results of pile testing, the book makes recommendations for the design and choice of bored, CFA, driven cast-in-place and pre-formed piles in chalk and for estimating shaft and base resistances. Contents:1 Introduction, 2 The engineering geology of chalk, 3 Description and classification of chalk, 4 Mechanical properties of the chalk, 5 Chalk in embankments and fills, 6 Cuttings, retaining structures and anchorages in chalk, 7 Shallow foundations, 8 Piled foundations, 9 Site investigations in chalk, 10 Concluding remarks, References.
Download or read book Deep Excavations written by Malcolm Puller and published by Thomas Telford. This book was released on 2003 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: &Quot;This book assembles the practical rules and details for the efficient and economical execution of deep excavations. It draws together a wealth of experience of both design and construction from published work and the lifetime practice of the author. This second edition is extensively revised to include changes in design emphasis including those due to Eurocode 7 and descriptions of the latest equipment, construction techniques and geotechnical processes. Additional details include those of the latest piling and diaphragm wall equipment and innovations in top-down construction applied to basements and cut-and-cover works. The section on caissons has been expanded to include design methods."--BOOK JACKET.
Download or read book Pile Design and Construction Practice written by Michael Tomlinson and published by CRC Press. This book was released on 2014-10-08 with total page 597 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written to Eurocode 7 and the UK National AnnexUpdated to reflect the current usage of Eurocode 7, along with relevant parts of the British Standards, Pile Design and Construction Practice, Sixth Edition maintains the empirical correlations of the original-combining practical know how with scientific knowledge-and emphasizing relevant principles an
Download or read book Transactions written by and published by . This book was released on 1901 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rules and List of members included in some volumes.
