Download or read book Pile Design and Construction Rules of Thumb written by Ruwan Abey Rajapakse and published by Butterworth-Heinemann. This book was released on 2016-02-20 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pile Design and Construction Rules of Thumb presents Geotechnical and Civil Engineers a comprehensive coverage of Pile Foundation related theory and practice. Based on the author’s experience as a PE, the book brings concise theory and extensive calculations, examples and case studies that can be easily applied by professional in their day-to-day challenges. In its first part, the book covers the fundamentals of Pile Selection: Soil investigation, condition, pile types and how to choose them. In the second part it addresses the Design of Pile Foundations, including different types of soils, pile groups, pile settlement and pile design in rock. Next, the most extensive part covers Design Strategies and contains chapters on loading analysis, load distribution, negative skin friction, design for expansive soils, wave equation analysis, batter piles, seismic analysis and the use of softwares for design aid. The fourth part covers Construction Methods including hammers, Inspection, cost estimation, load tests, offshore piling, beams and caps. In this new and updated edition the author has incorporated new pile designs such as helical, composite, wind turbine monopiles, and spiral coil energy piles. All calculations have been updated to most current materials characteristics and designs available in the market. Also, new chapters on negative skin friction, pile driving, and pile load testing have been added. Practicing Geotechnical, and Civil Engineers will find in this book an excellent handbook for frequent consult, benefiting from the clear and direct calculations, examples, and cases. Civil Engineering preparing for PE exams may benefit from the extensive coverage of the subject. Convenient for day-to-day consults Numerous design examples for sandy soils, clay soils, and seismic loadings Now including helical, composite, wind turbine monopiles, and spiral coil energy piles Methodologies and case studies for different pile types Serves as PE exam preparation material

Download or read book Pile Foundations in Engineering Practice written by Shamsher Prakash and published by John Wiley & Sons. This book was released on 1991-01-16 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a concise, systematic and complete treatment of the design and construction of pile foundations. Discusses pile behavior under various loadings and types of piles and their installation, including consideration of soil parameters. It provides step-by-step design procedures for piles subject to vertical loading and pullout, lateral, inclined and eccentric loads, or dynamic loads, and for piles in permafrost. Also describes load test procedures and their interpretation and buckling of long, slender piles with and without supported length. The closing chapter presents case histories of prediction and performance of piles and pile groups. Includes numerous solved problems.

Download or read book Pile Design and Construction Practice written by Willis H. Thomas and published by CRC Press. This book was released on 2007-12-06 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: This international handbook is essential for geotechnical engineers and engineering geologists responsible for designing and constructing piled foundations. It explains general principles and practice and details current types of pile, piling equipment and methods. It includes calculations of the resistance of piles to compressive loads, pile group

Download or read book Pile Foundations for Buildings and Structures in Collapsible Soils written by A.A. Grigorian and published by Taylor & Francis. This book was released on 2022-04-18 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: A translation of a Russian study on pile foundation in collapsible soils, revised and updated for the 1995 English edition. The contents cover such topics as collapsible soils as basis for structures, and designing pile foundations for buildings and structures with collapsible soils.

Download or read book Design of Pile Foundations written by Aleksandar Sedmak Vesić and published by Transportation Research Board. This book was released on 1977-01-01 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Theory and Practice of Pile Foundations written by Wei Dong Guo and published by CRC Press. This book was released on 2012-11-14 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pile Foundations are an essential basis for many structures. It is vital that they be designed with the utmost reliability, because the cost of failure is potentially huge. Covering a whole range of design issues relating to pile design, this book presents economical and efficient design solutions and demonstrates them using real world examples. Co

Download or read book The Design of Piled Foundations written by Thomas Whitaker and published by Elsevier. This book was released on 2013-10-22 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Design of Piled Foundations, Second Edition focuses on the theories which have been advanced to predict the loads which piles will carry, both singly and when used in groups to form a piled foundation. Organized into 12 chapters, this book begins with an explanation of the utilization of piles. Subsequent chapters discuss the types of piles and their construction; pile driving by vibration; the calculation of the ultimate bearing capacity of a pile from soil properties; the settlement of single piles and the choice of a factor of safety; and piles in soft soils. Other chapters describe pile testing; piles in groups with vertical loading; horizontal forces on piles and pile group; and the durability of piles.

Download or read book Analysis of Pile Foundations Subject to Static and Dynamic Loading written by Amir M. Kaynia and published by CRC Press. This book was released on 2021-08-30 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents computational tools and design principles for piles used in a wide range of applications and for different loading conditions. The chapters provide a mixture of basic engineering solutions and latest research findings in a balanced manner. The chapters are written by world-renowned experts in the field. The materials are presented in a unified manner based on both simplified and rigorous numerical methods. The first four chapters present the basic elements and steps in analysis of piles under static and cyclic loading together with clear references to the appropriate design regulations in Eurocode 7 when relevant. The analysis techniques cover conventional code-based methods, solutions based on pile-soil interaction springs, and advanced 3D finite element methods. The applications range from conventional piles to large circular steel piles used as anchors or monopiles in offshore applications. Chapters 5 to 10 are devoted to dynamic and earthquake analyses and design. These chapters cover a range of solutions from dynamic pile-soil springs to elasto-dynamic solutions of large pile groups. Both linear and nonlinear soil behaviours are considered along with response due to dynamic loads and earthquake shaking including possible liquefaction. The book is unique in its unified treatment of the solutions used for static and dynamic analysis of piles with practical examples of application. The book is considered a valuable tool for practicing engineers, graduate students and researchers.

Download or read book Standard Guidelines for the Design and Installation of Pile Foundations written by American Society of Civil Engineers and published by Amer Society of Civil Engineers. This book was released on 1997-01-01 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard provides a guideline for an engineering approach to the design and subsequent installation of pile foundations. The purpose is to furnish a rational basis for this process, taking into account published model building codes and general standards of practice. It covers such topics as: administrative requirements; pile shaft strength requirements; soil-pile interface strength requirements and capacity; design loads; design stresses; construction and layout guidelines for pile design; and installation guidelines for pile construction. In addition, the Standard includes information on applicable standards from ASTM, AWPA, and ACI. It concludes with an Appendix on partial factors of safety.

Download or read book Geotechnical Engineering written by Ruwan Rajapakse and published by . This book was released on 2004 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The main objective of this book is to provide a comprehensive pile design and construction guide to practising geotechnical engineers. The book does not require any special technical knowledge other than basic mathematical skills. The first portion deals with construction aspects of piling. In this section, pile types, pile hammers, piling techniques, problems associated with piling work and cost considerations are discussed. Second portion of the book is devoted to pile design. Pile design in different soil conditions, pile groups, pile settlement, Bitumen coated pile design and lateral loading analysis were some of the subjects discussed. Almost all the chapters in the design section contain design examples. Design examples are provided to complement the theory and the designer should not follow the examples blindly during the design process"--Bookjacket

Download or read book Pile Design and Construction Practice Fourth Edition written by Michael Tomlinson and published by CRC Press. This book was released on 1993-11-11 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fourth edition of this well-known book is fully revised and up-dated. It deals comprehensively with every aspect of design and construction of all types of piled foundation. A key feature of this book is the large number of worked examples, many of which are based on actual problems encountered in practice.

Download or read book Design and Installation of Pile Foundations and Cellular Structures written by Hsai-Yang Fang and published by . This book was released on 1970 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design of Pile Foundations written by US Army Corps of Engineers and published by . This book was released on 2005-01-01 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual provides information, foundation exploration and testing procedures, load test methods, analysis techniques, allowable criteria, design procedures, and construction consideration for the selection, design, and installation of pile foundations. The guidance is based on the present state of the technology for pile-soil-structure-foundation interaction behavior. This manual provides design guidance intended specifically for the geotechnical and structural engineer but also provides essential information for others interested in pile foundations such as the construction engineer in understanding construction techniques related to pile behavior during installation. Since the understanding of the physical causes of pile foundation behavior is actively expanding by better definition through ongoing research, prototype, model pile, and pile group testing and development of more refined analytical models, this manual is intended to provide examples and procedures of what has been proven successful. This is not the last nor final word on the state of the art for this technology. We expect, as further practical design and installation procedures are developed from the expansion of this technology, that these updates will be issued as changes to this manual.

Download or read book Recommendations on Piling EA Pf hle written by Geotechnik and published by John Wiley & Sons. This book was released on 2013-12-09 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides a complete and detailed overview of piling systems and their application. The design and construction of piled foundations is based on Eurocode 7 and DIN 1054 edition 2010 as well as the European construction codes DIN EN 1536 (Bored piles), DIN EN 12699 (Displacement piles) and DIN EN 14199 (Micropiles). These recommendations also deal with - categorisation of piling systems, - actions on piles from structural loading, negative skin friction and side pressure, - pile resistances from static and dynamic pile test loading as well as extensive tables with the pile load-bearing capacity of nearly all piling systems based on values from practical experience, - pile groups, - performance of static and dynamic test loading and integrity tests, - load-bearing behaviour and verifications for piles under cyclical, dynamic and impact actions - quality assurance for construction. An appendix with numerous calculation examples completes the work. As part of the approval procedure for offshore wind energy structures, the Federal Office for Shipping and Hydrography (BSH) demands verifications according to the new Chapter 13 ("Load-bearing behaviour and verifications for piles under cyclical, dynamical and impact actions") of the EA Pfähle (the recommendations of the Piling working group - 2nd edition), which deals with external pile resistance for the foundations of offshore wind energy structures and the types of verifications to be provided under cyclical actions. The publication of the EA-Pfähle recommendations by the Piling working group of the German Society for Geotechnics (DGGT), which works with the same members as the piling standards committee NA 00-05-07, is intended to provide assistance for engineers active in the design, calculation and construction of piled foundations. The recommendations can thus be considered as rules of the technology and as a supplement to the available codes and standards.

Download or read book Pile Design and Construction Practice Sixth Edition written by Michael Tomlinson and published by CRC Press. This book was released on 2014-10-08 with total page 611 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written to Eurocode 7 and the UK National Annex Updated to reflect the current usage of Eurocode 7, along with relevant parts of the British Standards, Pile Design and Construction Practice, Sixth Edition maintains the empirical correlations of the original—combining practical know how with scientific knowledge —and emphasizing relevant principles and applications of soil mechanics and design. Contractors, geotechnical engineers and engineering geologists responsible for designing and constructing piled foundations can find the most current types of pile, piling equipment, and relevant methods in this latest work. The book summarizes recent changes, including new codified design procedures addressing design parameters and partial safety factors. It also presents several examples, many based on actual problems. Broad and Comprehensive In Its Coverage Contains material applicable to modern computational practice Provides new sections on the construction of micropiles and CFA piles, pile-soil interaction, verification of pile materials, piling for integral bridge abutments, use of polymer stabilising fluids, and more Includes calculations of the resistance of piles to compressive loads, pile groups under compressive loading, piled foundations for resisting uplift and lateral loading, and the structural design of piles and pile groups Covers marine structures, durability of piled foundations, ground investigations, and pile testing Addresses miscellaneous problems such as machinery foundations, underpinning, mining subsidence areas, geothermal piles, and unexploded ordnance Pile Design and Construction Practice, Sixth Edition serves as a comprehensive guide for practicing geotechnical engineers and engineering geologists. This text also works as a resource for piling contractors and graduate students studying geotechnical engineering.

Download or read book Design of Pile Foundations written by American Society of Civil Engineers and published by . This book was released on 1993 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Pile Foundations and Pile Structures written by American Society of Civil Engineers and published by . This book was released on 1960 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt: