Download or read book Pile Capacity by Direct CPT and CPTu Methods Applied to 102 Case Histories written by and published by . This book was released on 1997 with total page 19 pages. Available in PDF, EPUB and Kindle. Book excerpt: Six methods to determine axial pile capacity directly from cone penetration test (CPT) data are presented, dicussed, and compared. Five of the methods are CPT methods that apply total stress and a filtered arithmetic average of cone resistance. One is a recently developed method, CPTu, that considers pore-water pressure and applies an unfiltered geometric average of cone resistance. To determine unit shaft resistance, the new method uses a new soil profiling chart based on CPTu data. The six methods are applied to 102 case histories combining CPTu data and capacities obtained in static loading tests in compression and tension. The pile capacities range from 80 to 8000 kN. The soil profiles range from soft to stiff clay, medium to dense sand, and mixtures of clay, silt, and sand. The pile embedment lengths range from 5 to 67 m and the pile diameter range from 200 to 900 mm. The new CPTu method for determining pile capacity demonstrates better agreement with the capacity determined in a static loading test and less scatter than by CPT methods.

Download or read book Piezocone and Cone Penetration Test CPTu and CPT Applications in Foundation Engineering written by Abolfazl Eslami and published by Butterworth-Heinemann. This book was released on 2019-11-23 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Piezocone and cone penetration tests (CPTu and CPT) applications in foundation engineering includes different approaches for determining the bearing capacity of shallow foundations, along with methods for determining pile bearing capacity and settlement concepts. The use of soft computing (GMDH) neural networks related to CPT records and Geotechnical parameters are also discussed. In addition, different cases regarding the behavior of foundation performance using case records, such as shallow foundation, deep soil improvement, soil behavior classification (SBC), and bearing capacity are also included. Provides the latest on CPT and CPTu performance in geotechnical engineering, i.e., bearing capacity, settlement, liquefaction, soil classification and shear strength prediction Introduces soft computing methods for processing soil properties and pile bearing capacity via CPT and CPTu Explains CPT and CPTu testing methods which allows for the continuous, or virtually continuous, record of ground conditions

Download or read book Bearing Capacity of Piles from Cone Penetration Test Data written by and published by . This book was released on 1997 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions written by Francesco Silvestri and published by CRC Press. This book was released on 2019-10-22 with total page 5946 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions contains invited, keynote and theme lectures and regular papers presented at the 7th International Conference on Earthquake Geotechnical Engineering (Rome, Italy, 17-20 June 2019. The contributions deal with recent developments and advancements as well as case histories, field monitoring, experimental characterization, physical and analytical modelling, and applications related to the variety of environmental phenomena induced by earthquakes in soils and their effects on engineered systems interacting with them. The book is divided in the sections below: Invited papers Keynote papers Theme lectures Special Session on Large Scale Testing Special Session on Liquefact Projects Special Session on Lessons learned from recent earthquakes Special Session on the Central Italy earthquake Regular papers Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions provides a significant up-to-date collection of recent experiences and developments, and aims at engineers, geologists and seismologists, consultants, public and private contractors, local national and international authorities, and to all those involved in research and practice related to Earthquake Geotechnical Engineering.

Download or read book Cone Penetration Testing 2022 written by Guido Gottardi and published by CRC Press. This book was released on 2022-11-11 with total page 2784 pages. Available in PDF, EPUB and Kindle. Book excerpt: This abstracts volume (including full keynote and invited papers) contains the proceedings of the 5th International Symposium on Cone Penetration Testing (CPT’22), held in Bologna, Italy, 8-10 June 2022. More than 500 authors - academics, researchers, practitioners and manufacturers – contributed to the peer-reviewed papers included in this book, which includes three keynote lectures, four invited lectures and 169 technical papers. The contributions provide a full picture of the current knowledge and major trends in CPT research and development, with respect to innovations in instrumentation, latest advances in data interpretation, and emerging fields of CPT application. The paper topics encompass three well-established topic categories typically addressed in CPT events: - Equipment and Procedures - Data Interpretation - Applications. Emphasis is placed on the use of statistical approaches and innovative numerical strategies for CPT data interpretation, liquefaction studies, application of CPT to offshore engineering, comparative studies between CPT and other in-situ tests. Cone Penetration Testing 2022 contains a wealth of information that could be useful for researchers, practitioners and all those working in the broad and dynamic field of cone penetration testing.

Download or read book Piles and Pile Foundations written by Carlo Viggiani and published by CRC Press. This book was released on 2014-11-06 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Piled foundations are generally designed using empirical methods, in particular the traditional capacity based approach on which the majority of codes of practice are based. However in recent years the analysis of pile groups and piled rafts has undergone substantial development in the light of new research and the mechanisms for the interactions b

Download or read book Electrical Measuring Instruments and Measurements written by S.C. Bhargava and published by CRC Press. This book was released on 2012-12-27 with total page 1888 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, written for the benefit of engineering students and practicing engineers alike, is the culmination of the author's four decades of experience related to the subject of electrical measurements, comprising nearly 30 years of experimental research and more than 15 years of teaching at several engineering institutions. The unique feature of this book, apart from covering the syllabi of various universities, is the style of presentation of all important aspects and features of electrical measurements, with neatly and clearly drawn figures, diagrams and colour and b/w photos that illustrate details of instruments among other things, making the text easy to follow and comprehend. Enhancing the chapters are interspersed explanatory comments and, where necessary, footnotes to help better understanding of the chapter contents. Also, each chapter begins with a "recall" to link the subject matter with the related science or phenomenon and fundamental background. The first few chapters of the book comprise "Units, Dimensions and Standards"; "Electricity, Magnetism and Electromagnetism" and "Network Analysis". These topics form the basics of electrical measurements and provide a better understanding of the main topics discussed in later chapters. The last two chapters represent valuable assets of the book, and relate to (a) "Magnetic Measurements", describing many unique features not easily available elsewhere, a good study of which is essential for the design and development of most electric equipment – from motors to transformers and alternators, and (b) "Measurement of Non-electrical Quantities", dealing extensively with the measuring techniques of a number of variables that constitute an important requirement of engineering measurement practices. The book is supplemented by ten appendices covering various aspects dealing with the art and science of electrical measurement and of relevance to some of the topics in main chapters. Other useful features of the book include an elaborate chapter-by-chapter list of symbols, worked examples, exercises and quiz questions at the end of each chapter, and extensive authors' and subject index. This book will be of interest to all students taking courses in electrical measurements as a part of a B.Tech. in electrical engineering. Professionals in the field of electrical engineering will also find the book of use.

Download or read book Geotechnical and Geophysical Site Characterization 4 written by Roberto Quental Coutinho and published by CRC Press. This book was released on 2012-09-06 with total page 1888 pages. Available in PDF, EPUB and Kindle. Book excerpt: Site characterization is a fundamental step towards the proper design, construction and long term performance of all types of geotechnical projects, ranging from foundation, excavation, earth dams, embankments, seismic hazards, environmental issues, tunnels, near and offshore structures. Geotechnical and Geophysical Site Characterization 4 provides practical applications of novel and innovative technologies in geotechnical and geophysical engineering, and is of interest to academics, engineers and professionals involved in Geotechnical Engineering.

Download or read book Analysis of Pile Foundations Subject to Static and Dynamic Loading written by Amir M. Kaynia and published by CRC Press. This book was released on 2021-08-30 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents computational tools and design principles for piles used in a wide range of applications and for different loading conditions. The chapters provide a mixture of basic engineering solutions and latest research findings in a balanced manner. The chapters are written by world-renowned experts in the field. The materials are presented in a unified manner based on both simplified and rigorous numerical methods. The first four chapters present the basic elements and steps in analysis of piles under static and cyclic loading together with clear references to the appropriate design regulations in Eurocode 7 when relevant. The analysis techniques cover conventional code-based methods, solutions based on pile-soil interaction springs, and advanced 3D finite element methods. The applications range from conventional piles to large circular steel piles used as anchors or monopiles in offshore applications. Chapters 5 to 10 are devoted to dynamic and earthquake analyses and design. These chapters cover a range of solutions from dynamic pile-soil springs to elasto-dynamic solutions of large pile groups. Both linear and nonlinear soil behaviours are considered along with response due to dynamic loads and earthquake shaking including possible liquefaction. The book is unique in its unified treatment of the solutions used for static and dynamic analysis of piles with practical examples of application. The book is considered a valuable tool for practicing engineers, graduate students and researchers.

Download or read book Handbook of Tropical Residual Soils Engineering written by Bujang B.K. Huat and published by CRC Press. This book was released on 2012-05-24 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt: Residual soils are found in many parts of the world. Like other soils, they are used extensively in construction, either to build upon, or as construction material. They are formed when the rate of rock weathering is more rapid than transportation of the weathered particles by e.g., water, gravity and wind, which results in a large share of the soi

Download or read book Foundation Engineering Analysis and Design written by An-Bin Huang and published by CRC Press. This book was released on 2017-12-06 with total page 601 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the core roles of a practising geotechnical engineer is to analyse and design foundations. This textbook for advanced undergraduates and graduate students covers the analysis, design and construction of shallow and deep foundations and retaining structures as well as the stability analysis and mitigation of slopes. It progressively introduces critical state soil mechanics and plasticity theories such as plastic limit analysis and cavity expansion theories before leading into the theories of foundation, lateral earth pressure and slope stability analysis. On the engineering side, the book introduces construction and testing methods used in current practice. Throughout it emphasizes the connection between theory and practice. It prepares readers for the more sophisticated non-linear elastic-plastic analysis in foundation engineering which is commonly used in engineering practice, and serves too as a reference book for practising engineers. A companion website provides a series of Excel spreadsheet programs to cover all examples included in the book, and PowerPoint lecture slides and a solutions manual for lecturers. Using Excel, the relationships between the input parameters and the design and analysis results can be seen. Numerical values of complex equations can be calculated quickly. non-linearity and optimization can be brought in more easily to employ functioned numerical methods. And sophisticated methods can be seen in practice, such as p-y curve for laterally loaded piles and flexible retaining structures, and methods of slices for slope stability analysis.

Download or read book Proceedings of China Europe Conference on Geotechnical Engineering written by Wei Wu and published by Springer. This book was released on 2018-08-02 with total page 904 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book compiles the second part of contributions to the China–Europe Conference on Geotechnical Engineering held 13.-16. August 2018 in Vienna, Austria. About 400 papers from 35 countries cover virtually all areas of geotechnical engineering and make this conference a truly international event. The contributions are grouped into thirteen special sessions and provide an overview of the geoengineering research and practice in China, Europe and the world: · Constitutive model · Micro-macro relationship · Numerical simulation · Laboratory testing · Geotechnical monitoring, instrumentation and field test · Foundation engineering · Underground construction · Environmental geotechnics · New geomaterials and ground improvement · Cold regions geotechnical engineering · Geohazards – risk assessment, mitigation and prevention · Unsaturated soils and energy geotechnics · Geotechnics in transportation, structural and hydraulic Engineering

Download or read book Proceedings of the 2nd Vietnam Symposium on Advances in Offshore Engineering written by Dat Vu Khoa Huynh and published by Springer Nature. This book was released on 2021-12-24 with total page 559 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers a selection of refereed papers presented at the 2nd Vietnam Symposium on Advances in Offshore Engineering (VSOE 2021), held in 2022 in Ho Chi Minh City, Vietnam. The book consists of articles written by researchers, practitioners, policymakers, and entrepreneurs addressing the important topic of technological and policy changes intended to promote renewable energies and to generate business opportunities in oil and gas and offshore renewable energy. With a special focus on sustainable energy and marine planning, the book brings together the latest lessons learned in offshore engineering, technological innovations, cost-effective and safer foundations and structural solutions, environmental protection, hazards, vulnerability, and risk management. Its content caters to graduate students, researchers, and industrial practitioners working in the fields of offshore engineering and renewable energies.

Download or read book Canadian Geotechnical Journal written by and published by . This book was released on 2010 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Engineering of Glacial Deposits written by Barry G. Clarke and published by CRC Press. This book was released on 2017-07-14 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: At some time 30% of the world’s land mass was covered by glaciers leaving substantial deposits of glacial soils under major conurbations in Europe, North and South America, New Zealand, Europe and Russia. For instance, 60% of the UK has been affected, leaving significant glacial deposits under major conurbations where two thirds of the population live. Glacial soils are composite soils with significant variations in composition and properties and are recognised as challenging soils to deal with. Understanding the environment in which they were formed and how this affects their behaviour are critical because they do not always conform to classic theories of soil mechanics. This book is aimed at designers and contractors working in the construction and extractive industries to help them mitigate construction hazards on, with or in glacial deposits. These soils increase risks to critical infrastructure which, in the UK includes the majority of the road and rail network, coastal defences such as the fastest eroding coastline in Europe and most of the water supply reservoirs. It brings together many years of experience of research into the behaviour of glacial deposits drawing upon published and unpublished case studies from industry. It draws on recent developments in understanding of the geological processes and the impact they have upon the engineering properties, construction processes and performance of geotechnical structures. Unlike other books on glaciation it brings together all the relevant disciplines in earth sciences and engineering to make it directly relevant to the construction industry.

Download or read book Advances in Deep Foundations written by Yoshiaki Kikuchi and published by Taylor & Francis. This book was released on 2007-06-21 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Civil Engineering has recently seen enormous progress in the core field of the construction of deep foundations. This book is the result of the International Workshop on Recent Advances in Deep Foundations (IWDPF07), which was held in Yokosuka, Japan from the 1st to the 2nd of February, 2007. Topics under discussion in this book include recent rese

Download or read book Cone Penetrometer Comparison Testing written by James A. Schneider and published by . This book was released on 2011 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: A total of 61 cone penetration tests were performed at 14 sites in the state of Wisconsin. Data reinforced conclusions from practice in Minnesota and previously performed test programs related to the Marquette Interchange and Mitchell interchange project that use of the CPT can be successful in glacial geologies. Within in this study CPTs were performed to depths in excess of 75 feet in alluvial deposits, outwash, and lacustrine soils. Difficulties were encountered in clay tills and fill placed for highway structures. However, previous experience in Milwaukee by commercial CPT operators had success in clayey tills of eastern Wisconsin.