Download or read book Piezoelectric Accelerometers with Integral Electronics written by Felix Levinzon and published by Springer. This book was released on 2014-08-06 with total page 169 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an invaluable reference to Piezoelectric Accelerometers with Integral Electronics (IEPE). It describes the design and performance parameters of IEPE accelerometers and their key elements, PE transducers and FET-input amplifiers. Coverage includes recently designed, low-noise and high temperature IEPE accelerometers. Readers will benefit from the detailed noise analysis of the IEPE accelerometer, which enables estimation of its noise floor and noise limits. Other topics useful for designers of low-noise, high temperature silicon-based electronics include noise analysis of FET amplifiers, experimental investigation and comparison of low-frequency noise in different JFETs and MOSFETs, and ultra-low-noise JFETs (at level of 0.6 nV/√Hz). The discussion also includes ultra-low-noise (at level of 3 ng/√Hz) seismic IEPE accelerometers and high temperature (up to 175 ̊C) triaxial and single axis miniature IEPE accelerometers, along with key factors for their design. • Provides a comprehensive reference to the design and performance of IEPE accelerometers, including low-noise and high temperature IEPE sensors; • Includes noise analysis of the IEPE accelerometer, which enables estimation of the its noise floor and noise limits; • Describes recently design of ultra-low-noise (at level of 3 ng/√Hz) IEPE seismic accelerometers and high temperature (up to 175 ̊C) triaxial and single axis miniature IEPE accelerometers; • Compares low-frequency noise in different JFETs and MOSFETs including measurement results of ultra-low-noise (at level of 0.6 nV/√Hz) JFET; • Presents key factors for design of low-noise and high temperature IEPE accelerometer and their electronics.
Download or read book Smart Sensors and MEMS written by Sergey Y. Yurish and published by Springer Science & Business Media. This book was released on 2007-11-12 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book Smart Sensors and MEMS provides an unique collection of contributions on latest achievements in sensors area and technologies that have made by eleven internationally recognized leading experts from Czech Republic, Germany, Italy, Israel, Portugal, Switzerland, Ukraine and USA during the NATO Advanced Study Institute (ASI) in Povoa de Varzim, Portugal, from 8 to 19 September 2003. The aims of this volume are to disseminate wider and in-depth theoretical and practical knowledge about smart sensors and its applications, to create a clear consciousness about the effectiveness of MEMS technologies, advanced signal processing and conversion methods, to stimulate the theoretical and applied research in these areas, and promote the practical using of these techniques in the industry. With that in mind, a broad range of physical, chemical and biosensors design principles, technologies and applications were included in the book. It is a first attempt to describe in the same book different physical, chemical, biological sensors and MEMS technologies suitable for smart sensors creation. The book presents the state-of-the-art and gives an excellent opportunity to provide a systematic, in-depth treatment of the new and rapidly developing field of smart sensors and MEMS. The volume is an excellent guide for practicing engineers, researchers and students interested in this crucial aspect of actual smart sensor design.
Download or read book Earthquakes written by Taher Zouaghi and published by BoD – Books on Demand. This book was released on 2017-02-01 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is devoted to diverse aspects of earthquake researches, especially to new achievements in seismicity that involves geosciences, assessment, and mitigation. Chapters contain advanced materials of detailed engineering investigations, which can help more clearly appreciate, predict, and manage different earthquake processes. Different research themes for diverse areas in the world are developed here, highlighting new methods of studies that lead to new results and models, which could be helpful for the earthquake risk. The presented and developed themes mainly concern wave's characterization and decomposition, recent seismic activity, assessment-mitigation, and engineering techniques. The book provides the state of the art on recent progress in earthquake engineering and management. The obtained results show a scientific progress that has an international scope and, consequently, should open perspectives to other still unresolved interesting aspects.
Download or read book Piezoelectric Ceramic Resonators written by Jiří Erhart and published by Springer. This book was released on 2016-10-24 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book helps the reader to understand the specific properties of piezoelectric ceramic resonators. It provides their theoretical description by immitance and equivalent circuit method. The nummerical modelling described is accompanied by examples of properties measured experimentally. Piezoelectric ceramic transformers are also covered, followed by a series of solved and unsolved problems prepared specially for students.
Download or read book Advanced Topics Of Thin walled Structures written by Haim Abramovich and published by World Scientific. This book was released on 2021-06-10 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique compendium presents some new topics related to thin-walled structures, like beams, plates and shells used in aerospace structures. It highlights their dynamic behaviors and also the correlation between compressive loading and natural frequency to enable a correlation between the two, yielding a valuable non-destructive tool, to predict buckling for thin-walled structures.This useful reference text combines valuable data on metal materials and composite materials together with new adaptive and smart materials like piezoelectricity, shape memory alloys and optic fibers, which form the present state of the art in thin-walled structure domain.
Download or read book Considerations in Computing the Useful Frequency Range of Piezoelectric Accelerometers written by Nathan Newman and published by . This book was released on 1969 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: The paper analyzes two lumped-parameter models for computing the usable frequency range of piezoelectric accelerometers.The analyses indicate why application of an electrical excitation to the piezoelectric element of a mounted pickup does not, in general, give the same result as application of a mechanical acceleration to the structure on which the pickup is mounted.Tabular results of the computations for various sets of parameters indicate those cases for which the electrical drive will give resonant frequency values within 2% of those for the pickup mounted on a vibrating structure. For these parameter sets, the electrical drive can be used as a reliable substitute.(Author).
Download or read book Active Control Of Aircraft Cabin Noise written by Ignazio Dimino and published by World Scientific. This book was released on 2015-07-13 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: 'The text is well written and supported by clear and useful illustrations. This would be a useful textbook for postgraduate or advanced undergraduate studies and would also make a good introductory text for engineers moving into the field. The literature survey and bibliography provide a useful starting point for further study.'The Aeronautical JournalActive Control of Aircraft Cabin Noise provides a bridge to fill the gap between robust control theory and practical applications of active noise control systems in aircraft cabin. Both the possibilities and limitations of structural solutions to enhance aircraft cabin comfort by reducing interior noise are discussed supported by a wide range of topics in engineering, from finite element modeling to multichannel adaptive feed-forward control, usually dealt separately in the literature. In addition, experimental noise attenuation results with passengers' subjective perceptions predicting the effects of cabin noise on comfort assessments is examined. Theoretical and experimental research is detailed enough to capture the interest of the non-expert in engineering who wishes to have an overview of some of the active noise control applications in aircraft. This book may be used as an advanced textbook by graduate and undergraduate students in aeronautical engineering, and would be an authoritative resource book for research into the subject.
Download or read book Smart Civil Structures written by You-Lin Xu and published by CRC Press. This book was released on 2017-04-11 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: A smart civil structure integrates smart materials, sensors, actuators, signal processors, communication networks, power sources, diagonal strategies, control strategies, repair strategies, and life-cycle management strategies. It should function optimally and safely in its environment and maintain structural integrity during strong winds, severe earthquakes, and other extreme events. This book extends from the fundamentals to the state-of-the-art. It covers the elements of smart civil structures, their integration, and their functions. The elements consist of smart materials, sensors, control devices, signal processors, and communication networks. Integration refers to multi-scale modelling and model updating, multi-type sensor placement, control theory, and collective placement of control devices and sensors. And the functions include structural health monitoring, structural vibration control, structural self-repairing, and structural energy harvesting, with emphasis on their synthesis to form truly smart civil structures. It suits civil engineering students, professionals, and researchers with its blend of principles and practice.
Download or read book ICPMG2014 Physical Modelling in Geotechnics written by Christophe Gaudin and published by CRC Press. This book was released on 2019-01-08 with total page 1366 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 8th International Conference on Physical Modelling in Geotechnics (ICPMG2014) was organised by the Centre for Offshore Foundation Systems at the University of Western Australia under the auspices of the Technical Committee 104 for Physical Modelling in Geotechnics of the International Society of Soil Mechanics and Geotechnical Engineering. This quadrennial conference is the traditional focal point for the physical modelling community of academics, scientists and engineers to present and exchange the latest developments on a wide range of physical modelling aspects associated with geotechnical engineering. These proceedings, together with the seven previous proceedings dating from 1988, present an inestimable collection of the technical and scientific developments and breakthroughs established over the last 25 years. These proceedings include 10 keynote lectures from scientific leaders within the physical modelling community and 160 peer-reviewed papers from 26 countries. They are organised in 14 themes, presenting the latest developments in physical modelling technology, modelling techniques and sensors, through a wide range of soil-structure interaction problems, including shallow and deep foundations, offshore geotechnics, dams and embankments, excavations and retaining structures and slope stability. Fundamental aspects of earthquake engineering, geohazards, ground reinforcements and improvements, and soil properties and behaviour are also covered, demonstrating the increasing complexity of modelling arising from state-of-the-art technological developments and increased understanding of similitude principles. A special theme on education presents the latest developments in the use of physical modelling techniques for instructing undergraduate and postgraduate students in geotechnical engineering.
Download or read book Van Nostrand s Scientific Encyclopedia written by Douglas M. Considine and published by Springer Science & Business Media. This book was released on 2013-12-11 with total page 3529 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advancements in science and engineering have occurred at a surprisingly rapid pace since the release of the seventh edition of this encyclopedia. Large portions of the reference have required comprehensive rewriting and new illustrations. Scores of new topics have been included to create this thoroughly updated eighth edition. The appearance of this new edition in 1994 marks the continuation of a tradition commenced well over a half-century ago in 1938 Van Nostrand's Scientific Encyclopedia, First Edition, was published and welcomed by educators worldwide at a time when what we know today as modern science was just getting underway. The early encyclopedia was well received by students and educators alike during a critical time span when science became established as a major factor in shaping the progress and economy of individual nations and at the global level. A vital need existed for a permanent science reference that could be updated periodically and made conveniently available to audiences that numbered in the millions. The pioneering VNSE met these criteria and continues today as a reliable technical information source for making private and public decisions that present a backdrop of technical alternatives.
Download or read book AN INTRODUCTION TO LINEAR ALGEBRA written by ARUN K. GHOSH and published by PHI Learning Pvt. Ltd.. This book was released on 2014-09-16 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Primarily intended as a textbook for undergraduate courses in applied electronics and instrumentation engineering, instrumentation and control engineering, electrical and electronics engineering and electronics and telecommunication engineering, this student-friendly book provides an in-depth coverage of transducers. Organised in 12 chapters, the book • presents a comprehensive classification of transducers based on common properties such as mechanical, resistive, inductive, capacitive, piezoelectric, magnetic, fibre-optic, ultrasonic and electrochemical; • discusses the general principles of each group, presenting their applications in sensing physical quantities such as pressure, temperature and so on; • outlines the distinguishing features of transducers and elaborates on modern sensors based on optical fibres (intensity modulated, phase modulated and spectrally modulated sensors such as Bragg grating, Fabry–Pérot interferometer, Brillouin scattering sensor) and sensors based on surface acoustic wave; and • contains numerous solved examples and review questions that illustrate the application of theory to reinforce the concepts.
Download or read book Sensors and Signal Conditioning written by Ramón Pallás-Areny and published by John Wiley & Sons. This book was released on 2012-11-07 with total page 607 pages. Available in PDF, EPUB and Kindle. Book excerpt: Praise for the First Edition . . . "A unique piece of work, a book for electronics engineering, in general, but well suited and excellently applicable also to biomedical engineering . . . I recommend it with no reservation, congratulating the authors for the job performed." -IEEE Engineering in Medicine & Biology "Describes a broad range of sensors in practical use and some circuit designs; copious information about electronic components is supplied, a matter of great value to electronic engineers. A large number of applications are supplied for each type of sensor described . . . This volume is of considerable importance."-Robotica In this new edition of their successful book, renowned authorities Ramon Pallàs-Areny and John Webster bring you up to speed on the latest advances in sensor technology, addressing both the explosive growth in the use of microsensors and improvements made in classical macrosensors. They continue to offer the only combined treatment for both sensors and the signal-conditioning circuits associated with them, following the discussion of a given sensor and its applications with signal-conditioning methods for this type of sensor. New and expanded coverage includes: * New sections on sensor materials and microsensor technology * Basic measurement methods and primary sensors for common physical quantities * A wide range of new sensors, from magnetoresistive sensors and SQUIDs to biosensors * The widely used velocity sensors, fiber-optic sensors, and chemical sensors * Variable CMOS oscillators and other digital and intelligent sensors * 68 worked-out examples and 103 end-of-chapter problems with annotated solutions
Download or read book An Experimental Technique for the Evaluation of Thermal Transient Effects on Piezoelectric Accelerometers written by Carol F. Vezzetti and published by . This book was released on 1975 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Shock and Vibration Handbook written by Cyril M. Harris and published by McGraw-Hill Companies. This book was released on 1988 with total page 1396 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Human Vibration written by M. J. Griffin and published by Academic Press. This book was released on 2012-12-02 with total page 1005 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today the human body is exposed to vibration not only while traveling but also during leisure and domestic activities and in many occupations. This volume summarizes the current understanding of the many human responses to vibration. Divided into two parts, this book deals with whole-body vibrations and hand-transmitted vibration. In each part the experimental data and appropriate models are presented in detail so that readers can address practical problems. An extensive guide to national and international standards is provided, and a large multidisciplinary glossary of terms assists in understanding the relevant technical and medical jargon. This comprehensive reference volume is accessible to all those interested in human vibration: medical doctors, engineers, lawyers, scientists, and health and safety officials and administrators. LK uses the following bulleted list_ This new text features: An up-to-date statement of current knowledge on human responses to vibration A comprehensive glossary of terms in current use in the fields of vibration and human response An extensive bibliography and guide to national and international standards
Download or read book Proactive Condition Monitoring of Low Speed Machines written by Zhaklina Stamboliska and published by Springer. This book was released on 2014-11-15 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book broadens readers’ understanding of proactive condition monitoring of low- speed machines in heavy industries. It focuses on why low-speed machines are different than others and how maintenance of these machines should be implemented with particular attention. The authors explain the best available monitoring techniques for various equipment and the principle of how to get proactive information from each technique. They further put forward possible strategies for application of FEM for detection of faults and technical assessment of machinery. Implementation phases are described and industrial case studies of proactive condition monitoring are included. Proactive Condition Monitoring of Low-Speed Machines is an essential resource for engineers and technical managers across a range of industries as well as design engineers working in industrial product development.
Download or read book Harris Shock and Vibration Handbook written by Allan G. Piersol and published by McGraw Hill Professional. This book was released on 2009-10-01 with total page 1199 pages. Available in PDF, EPUB and Kindle. Book excerpt: The classic reference on shock and vibration, fully updated with the latest advances in the field Written by a team of internationally recognized experts, this comprehensive resource provides all the information you need to design, analyze, install, and maintain systems subject to mechanical shock and vibration. The book covers theory, instrumentation, measurement, testing, control methodologies, and practical applications. Harris' Shock and Vibration Handbook, Sixth Edition, has been extensively revised to include innovative techniques and technologies, such as the use of waveform replication, wavelets, and temporal moments. Learn how to successfully apply theory to solve frequently encountered problems. This definitive guide is essential for mechanical, aeronautical, acoustical, civil, electrical, and transportation engineers. EVERYTHING YOU NEED TO KNOW ABOUT MECHANICAL SHOCK AND VIBRATION, INCLUDING Fundamental theory Instrumentation and measurements Procedures for analyzing and testing systems subject to shock and vibration Ground-motion, fluid-flow, wind-. and sound-induced vibration Methods for controlling shock and vibration Equipment design The effects of shock and vibration on humans
