Download or read book Physics of Three dimensional Normal Shock Wave turbulent Boundary Layer Interactions in Rectangular Channels written by Kashmir Sami and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Shock Wave Boundary Layer Interactions written by Holger Babinsky and published by Cambridge University Press. This book was released on 2011-09-12 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shock wave-boundary-layer interaction (SBLI) is a fundamental phenomenon in gas dynamics that is observed in many practical situations, ranging from transonic aircraft wings to hypersonic vehicles and engines. SBLIs have the potential to pose serious problems in a flowfield; hence they often prove to be a critical - or even design limiting - issue for many aerospace applications. This is the first book devoted solely to a comprehensive, state-of-the-art explanation of this phenomenon. It includes a description of the basic fluid mechanics of SBLIs plus contributions from leading international experts who share their insight into their physics and the impact they have in practical flow situations. This book is for practitioners and graduate students in aerodynamics who wish to familiarize themselves with all aspects of SBLI flows. It is a valuable resource for specialists because it compiles experimental, computational and theoretical knowledge in one place.

Download or read book Shock Wave turbulent Boundary Layer Interaction in a Three dimensional Flow written by D. Barberis and published by . This book was released on 1995 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Navier Stokes Simulation of a Shock Wave turbulent Boundary Layer Interaction in a Three dimensional Channel written by L. Cambier and published by . This book was released on 1989 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Modeling of a Three dimensional Shock Wave Turbulent Boundary Layer Interaction written by S. Bogdonoff and published by . This book was released on 1990 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Three dimensional Shock Wave turbulent Boundary Layer Interactions at Mach 6 written by C. Herbert Law and published by . This book was released on 1975 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Investigation of Three Dimensional Shock Wave Turbulent Boundary Layer Interactions written by Morgan Lee Funderburk and published by . This book was released on 2019 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Three dimensional Shock Wave turbulent Boundary Layer Interaction for a 20 Degrees Sharp Fin at Mach 3 written by B. Shapey and published by . This book was released on 1987 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Study of Shock Wave and Turbulent Boundary Layer Interactions written by Seymour M. Bogdonoff and published by . This book was released on 1986 with total page 43 pages. Available in PDF, EPUB and Kindle. Book excerpt: The three dimensional shock wave turbulent boundary layer interaction generated by several shock generators defined solely by angles has been carried out at a Mach number of 3. Interactions with thin boundary layers were used to obtain overall characteristics, while interactions with thick boundary layers permitted detailed high resolution surveys. Investigations of the interactions were carried out by mean and high frequency surface pressure distribution measurements, surface flow visualization, and mean total head, yaw, and static pressure distributions through the flowfield. Major new data sets were obtained for the interaction of the shock wave generated by a 20 deg fin, and by a 24 deg wedge swept at 60 deg to the incoming flow. A series of tests were carried out to examine new concepts of three-dimensional interactions and extensive 'non-steady' results were obtained from the high frequency surface pressure distributions. Close coordination of the experiments with major computational efforts, support new concepts of flow structure and physics for these complex interactions. Keywords: Three-dimensional shock wave interactions; Conical similarity; Scaling laws; Conical/cylindrical boundary; Unsteady flow; Non-steady characteristics; flow physics and modeling; Supersonic characteristics.

Download or read book Theoretical Investigation of Three Dimensional Shock Wave Turbulent Boundary Layer Interactions written by Doyle D. Knight and published by . This book was released on 1982 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt: The focus of the research effort is the understanding of three-dimensional shock wave-turbulent boundary layer interactions. The approach uses the full mean compressible Navier-Stokes equations with turbulence incorporated through the algebraic turbulent eddy viscosity model of Baldwin and Lomax. During the present year of the research effort, the three-dimensional shock boundary layer interaction generated by a 10 deg sharp fin has been computed at Mach 3 for a Reynolds number 280000. These results, together with previous computations of the same configuration at Reynolds number = 930000, are compared with experimental data for pitot pressure and yaw angle. The agreement with the experimental data is good, and the theory accurately predicts the recovery of the boundary layer downstream of the interaction of Reynolds number = 280000. The computed flowfield is employed to analyze the structure of the 3-D interaction through contour plots of flow variables. Also, during the present year, the investigation of the 2-D turbulent supersonic compression corner at Mach 3 was completed. The relaxation modification to the Baldwin-Lomax model was found to yield reasonably accurate predictions of the upstream propagation of the surface for the Reynolds number range investigated. An additional computation at Mach 2 was performed, and the results were in general in agreement with the previous conclusions. (Author).

Download or read book Theoretical Investigation of Three Dimensional Shock Wave Turbulent Boundary Layer Interactions Part 4 written by and published by . This book was released on 1986 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt: A theoretical model consists of the Reynolds-averaged 3-D compressible Navier-Stokes equations, with turbulence incorporated using the algebraic turbulent eddy viscosity model of Baldwin and Lomax, This year research efforts focused on both 2-D and 3-D turbulent interactions. A theoretical model was examined for a series of separated 2-D compression corner flows at Mach 2 and 3. Calculations were performed for four separate compression corners using 2-D compressible Navier-Stodes conde with MacCormack's hybrid algorithm. Results were compared to earlier computations using the Beam-Warming algorithm, and recent experiment data for turbulent Reynolds stresses. Calculated Reynolds stresses were observed to differ significantly from experimental measurements due to the inability of the turbulence model to incorporate the multiple scale effects of the turbulence structure downstream of reattachment. Computed results using the MacCormack hybrid algorithm were observed to be insensitive to the Courant number. The 3-D turbulence interactions research concentrated on the 3-D sharp fin and on the 3-D swept compression corner. In the former case, the computed flowfield for the 20 deg sharp fin at Mach 3 and a Reynolds number of 930,000 was compared with the calculated results of Horstman (who used the Jones-Launder turbulence model) and experimental data of the Princeton Gas Dynamics Lab. Overall comparison with experiment was very good.

Download or read book An Exploratory Study of a Three Dimensional Shock Wave Boundary Layer Interaction at Mach 3 written by B. Oskam and published by . This book was released on 1975 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt: An exploratory experimental investigation has been carried out on the three dimensional flow fields caused by the interaction of oblique shock waves and a planar turbulent boundary layer. The study was performed at a free stream Mach number of 2.95, a Reynolds number per inch of 1.6 million and near adiabatic wall conditions. The interaction was studied on two experimental configurations having different initial boundary layer thicknesses (delta = approx. 0.13 and 0.55 inches). Both surface measurements as well as complete flow field surveys were performed. The main contributions of the present investigation are two experimentally derived flow field models for shock generator angles of 4 deg and 10 deg. Based upon both static pressure and surface flow patterns, as well as heat transfer data, the interaction region can be characterized as quasi-two-dimensional along the shock direction in the region studied. A critical examination of the occurrence of 'ordinary' flow separation and its character, as applied to the present problem, was carried out. It was concluded that McCabe's criterion, as used by the previous investigators, is not a sufficient condition to determine the onset of flow separation.

Download or read book Oblique Shock Wave Turbulent Boundary Layer Interactions in Three Dimensions at Mach 3 written by B. Oskam and published by . This book was released on 1976 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: An experimental study, thoroughly documenting the flow field and surface data resulting from the three-dimensional interaction of a shock wave, a shock generator and a high Reynolds number turbulent boundary layer, is described. Detailed surface static pressure data and heat transfer measurements are presented for 7 shock generator deflection angles ranging from 2 to 14 deg. in 2 deg. increments. The test conditions consist of a free stream Reynolds number per inch of 1.6 million, a near adiabatic wall temperature and ambient stagnation temperature. In addition to the surface data detailed flow field surveys have been conducted of time-averaged variables including flow angularity, pitot pressure, static pressure and total temperature at 2 shock generator deflection angles of 4 and 10 degrees. Detailed discussions of the experimental techniques are given which include a complete set of error estimates of the various types of data. Finally the data are presented in graphical form which may be used to analyse the problem under consideration. (Author).

Download or read book Fluctuations and Massive Separation in Three Dimensional Shock Wave Boundary Layer Interactions written by National Aeronautics and Space Adm Nasa and published by Independently Published. This book was released on 2018-12-29 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shock-wave unsteadiness was observed in rapidly compressed supersonic turbulent boundary layer flows with significant separation. A Mach 2.85 shock-wave/turbulent boundary layer flow was set up over a series of cylinder-flare bodies in the High Reynolds Number Channel 1. The transition from fully attached to fully separated flow was studied using axisymmetric flares with increasing compression angles. In the second phase, the 30 deg flare was inclined relative to the cylinder axis, so that the effect on a separated flow of increasing 3 dimensionality could be observed. Two 3-D separated cases are examined. A simple conditional sampling technique is applied to the data to group them according to an associated shock position. Mean velocities and turbulent kinetic energies, computed from the conditionally samples data, are compared to those from the unsorted data and to computed values. Three basic questions were addressed: can conditional sampling be used to provide snapshots of the flow; are averaged turbulence quantities dominated by the bimodal nature of the interaction; and is the shock unsteadiness really important to computational accuracy. Kussoy, M. I. and Brown, J. D. and Brown, J. L. and Lockman, W. K. and Horstman, C. C. Ames Research Center NASA-TM-89224, NAS 1.15:89224 NCC2-452...

Download or read book The Structure and Control of Three Dimensional Shock Wave Turbulent Boundary Layer Interactions written by and published by . This book was released on 1992 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt: The three year period covered in the subject report was a considerable shift from the previous years of work on shock wave turbulent boundary layer interactions. The earlier work concentrated on simple building block experiments and a search for fundamental understanding of the flow phenomena. In the subject research, most of the work on fundamentals for the simple configurations was stopped. The main emphasis for the first two years of the current program was on complex configurations and the final year was a close-out program on a new approach. The work on complex configurations was limited to two geometries which used the much studied single sharp fin interaction, Fig. 1, as the initial conditions. This shift in emphasis had two main purposes: (1) block experiments in more complex interactions required for applications and (2) to provide a more critical test of computation which, although giving the general characteristics for the building block experiments, did not give highly quantitative results. The primary activities for the first two years will be discussed in three major groupings: (1) and (2) Discussions of the two complex configurations, and (3) a description of the boundary layer conditions which are critical to the definition of the experiment and the check by computational fluid dynamics.

Download or read book Three Dimensional Shock Wave Turbulent Boundary Layer Interactions A Preliminary Analysis of Blunted Fin Induced Flows written by David S. Dolling and published by . This book was released on 1977 with total page 62 pages. Available in PDF, EPUB and Kindle. Book excerpt: An extensive experimental investigation has been made of three-dimensional blunted fin-induced shock wave turbulent boundary layer interactions. Surface pressures, heat transfer rate distributions and oil streak patterns were obtained over a range of fin bluntnesses and incidences for two different incoming boundary layers. These incoming boundary layers had mean thicknesses in the ratio of approximately 4:1. Preliminary analysis of these data indicates that, over a large region of the interaction, the property distributions collapse using purely geometric parameters. In contrast to its two-dimensional counterpart, which is a highly Reynolds number dependent viscous phenomenon, the present results seem to indicate that the three-dimensional case is primarily inviscid.

Download or read book Experimental Study of Shock wave Boundary layer Interaction in a Three dimensional Channel Flow written by R. Benay and published by . This book was released on 1985 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: