Download or read book Physics of Failure Based Handbook of Microelectronic Systems written by Shahrzad Salemi and published by RIAC. This book was released on 2008 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reliability Prediction for Microelectronics written by Joseph B. Bernstein and published by John Wiley & Sons. This book was released on 2024-02-20 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: RELIABILITY PREDICTION FOR MICROELECTRONICS Wiley Series in Quality & Reliability Engineering REVOLUTIONIZE YOUR APPROACH TO RELIABILITY ASSESSMENT WITH THIS GROUNDBREAKING BOOK Reliability evaluation is a critical aspect of engineering, without which safe performance within desired parameters over the lifespan of machines cannot be guaranteed. With microelectronics in particular, the challenges to evaluating reliability are considerable, and statistical methods for creating microelectronic reliability standards are complex. With nano-scale microelectronic devices increasingly prominent in modern life, it has never been more important to understand the tools available to evaluate reliability. Reliability Prediction for Microelectronics meets this need with a cluster of tools built around principles of reliability physics and the concept of remaining useful life (RUL). It takes as its core subject the ‘physics of failure’, combining a thorough understanding of conventional approaches to reliability evaluation with a keen knowledge of their blind spots. It equips engineers and researchers with the capacity to overcome decades of errant reliability physics and place their work on a sound engineering footing. Reliability Prediction for Microelectronics readers will also find: Focus on the tools required to perform reliability assessments in real operating conditions Detailed discussion of topics including failure foundation, reliability testing, acceleration factor calculation, and more New multi-physics of failure on DSM technologies, including TDDB, EM, HCI, and BTI Reliability Prediction for Microelectronics is ideal for reliability and quality engineers, design engineers, and advanced engineering students looking to understand this crucial area of product design and testing.
Download or read book Applied Reliability Engineering and Risk Analysis written by Ilia B. Frenkel and published by John Wiley & Sons. This book was released on 2013-08-22 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: This complete resource on the theory and applications of reliability engineering, probabilistic models and risk analysis consolidates all the latest research, presenting the most up-to-date developments in this field. With comprehensive coverage of the theoretical and practical issues of both classic and modern topics, it also provides a unique commemoration to the centennial of the birth of Boris Gnedenko, one of the most prominent reliability scientists of the twentieth century. Key features include: expert treatment of probabilistic models and statistical inference from leading scientists, researchers and practitioners in their respective reliability fields detailed coverage of multi-state system reliability, maintenance models, statistical inference in reliability, systemability, physics of failures and reliability demonstration many examples and engineering case studies to illustrate the theoretical results and their practical applications in industry Applied Reliability Engineering and Risk Analysis is one of the first works to treat the important areas of degradation analysis, multi-state system reliability, networks and large-scale systems in one comprehensive volume. It is an essential reference for engineers and scientists involved in reliability analysis, applied probability and statistics, reliability engineering and maintenance, logistics, and quality control. It is also a useful resource for graduate students specialising in reliability analysis and applied probability and statistics. Dedicated to the Centennial of the birth of Boris Gnedenko, renowned Russian mathematician and reliability theorist
Download or read book Reliability Growth written by Panel on Reliability Growth Methods for Defense Systems and published by National Academy Press. This book was released on 2015-03-01 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: A high percentage of defense systems fail to meet their reliability requirements. This is a serious problem for the U.S. Department of Defense (DOD), as well as the nation. Those systems are not only less likely to successfully carry out their intended missions, but they also could endanger the lives of the operators. Furthermore, reliability failures discovered after deployment can result in costly and strategic delays and the need for expensive redesign, which often limits the tactical situations in which the system can be used. Finally, systems that fail to meet their reliability requirements are much more likely to need additional scheduled and unscheduled maintenance and to need more spare parts and possibly replacement systems, all of which can substantially increase the life-cycle costs of a system. Beginning in 2008, DOD undertook a concerted effort to raise the priority of reliability through greater use of design for reliability techniques, reliability growth testing, and formal reliability growth modeling, by both the contractors and DOD units. To this end, handbooks, guidances, and formal memoranda were revised or newly issued to reduce the frequency of reliability deficiencies for defense systems in operational testing and the effects of those deficiencies. "Reliability Growth" evaluates these recent changes and, more generally, assesses how current DOD principles and practices could be modified to increase the likelihood that defense systems will satisfy their reliability requirements. This report examines changes to the reliability requirements for proposed systems; defines modern design and testing for reliability; discusses the contractor's role in reliability testing; and summarizes the current state of formal reliability growth modeling. The recommendations of "Reliability Growth" will improve the reliability of defense systems and protect the health of the valuable personnel who operate them.
Download or read book Handbook of Systems Engineering and Management written by Andrew P. Sage and published by John Wiley & Sons. This book was released on 2014-12-31 with total page 1502 pages. Available in PDF, EPUB and Kindle. Book excerpt: The trusted handbook—now in a new edition This newly revised handbook presents a multifaceted view of systems engineering from process and systems management perspectives. It begins with a comprehensive introduction to the subject and provides a brief overview of the thirty-four chapters that follow. This introductory chapter is intended to serve as a "field guide" that indicates why, when, and how to use the material that follows in the handbook. Topical coverage includes: systems engineering life cycles and management; risk management; discovering system requirements; configuration management; cost management; total quality management; reliability, maintainability, and availability; concurrent engineering; standards in systems engineering; system architectures; systems design; systems integration; systematic measurements; human supervisory control; managing organizational and individual decision-making; systems reengineering; project planning; human systems integration; information technology and knowledge management; and more. The handbook is written and edited for systems engineers in industry and government, and to serve as a university reference handbook in systems engineering and management courses. By focusing on systems engineering processes and systems management, the editors have produced a long-lasting handbook that will make a difference in the design of systems of all types that are large in scale and/or scope.
Download or read book Reliability of Organic Compounds in Microelectronics and Optoelectronics written by Willem Dirk van Driel and published by Springer Nature. This book was released on 2022-01-31 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to provide a comprehensive reference into the critical subject of failure and degradation in organic materials, used in optoelectronics and microelectronics systems and devices. Readers in different industrial sectors, including microelectronics, automotive, lighting, oil/gas, and petrochemical will benefit from this book. Several case studies and examples are discussed, which readers will find useful to assess and mitigate similar failure cases. More importantly, this book presents methodologies and useful approaches in analyzing a failure and in relating a failure to the reliability of materials and systems.
Download or read book Reliability Assessments written by Franklin Richard Nash, Ph.D. and published by CRC Press. This book was released on 2017-07-12 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides engineers and scientists with a single source introduction to the concepts, models, and case studies for making credible reliability assessments. It satisfies the need for thorough discussions of several fundamental subjects. Section I contains a comprehensive overview of assessing and assuring reliability that is followed by discussions of: • Concept of randomness and its relationship to chaos • Uses and limitations of the binomial and Poisson distributions • Relationship of the chi-square method and Poisson curves • Derivations and applications of the exponential, Weibull, and lognormal models • Examination of the human mortality bathtub curve as a template for components Section II introduces the case study modeling of failure data and is followed by analyses of: • 5 sets of ideal Weibull, lognormal, and normal failure data • 83 sets of actual (real) failure data The intent of the modeling was to find the best descriptions of the failures using statistical life models, principally the Weibull, lognormal, and normal models, for characterizing the failure probability distributions of the times-, cycles-, and miles-to-failure during laboratory or field testing. The statistical model providing the preferred characterization was determined empirically by choosing the two-parameter model that gave the best straight-line fit in the failure probability plots using a combination of visual inspection and three statistical goodness-of-fit (GoF) tests. This book offers practical insight in dealing with single item reliability and illustrates the use of reliability methods to solve industry problems.
Download or read book Mechanics of Microelectronics written by G.Q. Zhang and published by Springer Science & Business Media. This book was released on 2006-08-25 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is written by leading experts with both profound knowledge and rich practical experience in advanced mechanics and the microelectronics industry essential for current and future development. It aims to provide the cutting edge knowledge and solutions for various mechanical related problems, in a systematic way. It contains important and detailed information about the state-of-the-art theories, methodologies, the way of working and real case studies.
Download or read book Handbook of Performability Engineering written by Krishna B. Misra and published by Springer Science & Business Media. This book was released on 2008-08-24 with total page 1331 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dependability and cost effectiveness are primarily seen as instruments for conducting international trade in the free market environment. These factors cannot be considered in isolation of each other. This handbook considers all aspects of performability engineering. The book provides a holistic view of the entire life cycle of activities of the product, along with the associated cost of environmental preservation at each stage, while maximizing the performance.
Download or read book Influence of Temperature on Microelectronics and System Reliability written by Pradeep Lall and published by CRC Press. This book was released on 2020-07-09 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book raises the level of understanding of thermal design criteria. It provides the design team with sufficient knowledge to help them evaluate device architecture trade-offs and the effects of operating temperatures. The author provides readers a sound scientific basis for system operation at realistic steady state temperatures without reliability penalties. Higher temperature performance than is commonly recommended is shown to be cost effective in production for life cycle costs. The microelectronic package considered in the book is assumed to consist of a semiconductor device with first-level interconnects that may be wirebonds, flip-chip, or tape automated bonds; die attach; substrate; substrate attach; case; lid; lid seal; and lead seal. The temperature effects on electrical parameters of both bipolar and MOSFET devices are discussed, and models quantifying the temperature effects on package elements are identified. Temperature-related models have been used to derive derating criteria for determining the maximum and minimum allowable temperature stresses for a given microelectronic package architecture. The first chapter outlines problems with some of the current modeling strategies. The next two chapters present microelectronic device failure mechanisms in terms of their dependence on steady state temperature, temperature cycle, temperature gradient, and rate of change of temperature at the chip and package level. Physics-of-failure based models used to characterize these failure mechanisms are identified and the variabilities in temperature dependence of each of the failure mechanisms are characterized. Chapters 4 and 5 describe the effects of temperature on the performance characteristics of MOS and bipolar devices. Chapter 6 discusses using high-temperature stress screens, including burn-in, for high-reliability applications. The burn-in conditions used by some manufacturers are examined and a physics-of-failure approach is described. The
Download or read book Reliability Prediction from Burn In Data Fit to Reliability Models written by Joseph Bernstein and published by Academic Press. This book was released on 2014-03-06 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work will educate chip and system designers on a method for accurately predicting circuit and system reliability in order to estimate failures that will occur in the field as a function of operating conditions at the chip level. This book will combine the knowledge taught in many reliability publications and illustrate how to use the knowledge presented by the semiconductor manufacturing companies in combination with the HTOL end-of-life testing that is currently performed by the chip suppliers as part of their standard qualification procedure and make accurate reliability predictions. This book will allow chip designers to predict FIT and DPPM values as a function of operating conditions and chip temperature so that users ultimately will have control of reliability in their design so the reliability and performance will be considered concurrently with their design. - The ability to include reliability calculations and test results in their product design - The ability to use reliability data provided to them by their suppliers to make meaningful reliability predictions - Have accurate failure rate calculations for calculating warrantee period replacement costs
Download or read book Failure Analysis written by Marius Bazu and published by John Wiley & Sons. This book was released on 2011-03-08 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Failure analysis is the preferred method to investigate product or process reliability and to ensure optimum performance of electrical components and systems. The physics-of-failure approach is the only internationally accepted solution for continuously improving the reliability of materials, devices and processes. The models have been developed from the physical and chemical phenomena that are responsible for degradation or failure of electronic components and materials and now replace popular distribution models for failure mechanisms such as Weibull or lognormal. Reliability engineers need practical orientation around the complex procedures involved in failure analysis. This guide acts as a tool for all advanced techniques, their benefits and vital aspects of their use in a reliability programme. Using twelve complex case studies, the authors explain why failure analysis should be used with electronic components, when implementation is appropriate and methods for its successful use. Inside you will find detailed coverage on: a synergistic approach to failure modes and mechanisms, along with reliability physics and the failure analysis of materials, emphasizing the vital importance of cooperation between a product development team involved the reasons why failure analysis is an important tool for improving yield and reliability by corrective actions the design stage, highlighting the ‘concurrent engineering' approach and DfR (Design for Reliability) failure analysis during fabrication, covering reliability monitoring, process monitors and package reliability reliability resting after fabrication, including reliability assessment at this stage and corrective actions a large variety of methods, such as electrical methods, thermal methods, optical methods, electron microscopy, mechanical methods, X-Ray methods, spectroscopic, acoustical, and laser methods new challenges in reliability testing, such as its use in microsystems and nanostructures This practical yet comprehensive reference is useful for manufacturers and engineers involved in the design, fabrication and testing of electronic components, devices, ICs and electronic systems, as well as for users of components in complex systems wanting to discover the roots of the reliability flaws for their products.
Download or read book Engineering Asset Management and Infrastructure Sustainability written by Joseph Mathew and published by Springer Science & Business Media. This book was released on 2012-05-11 with total page 1131 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Asset Management 2010 represents state-of-the art trends and developments in the emerging field of engineering asset management as presented at the Fifth World Congress on Engineering Asset Management (WCEAM). The proceedings of the WCEAM 2010 is an excellent reference for practitioners, researchers and students in the multidisciplinary field of asset management, covering topics such as: Asset condition monitoring and intelligent maintenance Asset data warehousing, data mining and fusion Asset performance and level-of-service models Design and life-cycle integrity of physical assets Education and training in asset management Engineering standards in asset management Fault diagnosis and prognostics Financial analysis methods for physical assets Human dimensions in integrated asset management Information quality management Information systems and knowledge management Intelligent sensors and devices Maintenance strategies in asset management Optimisation decisions in asset management Risk management in asset management Strategic asset management Sustainability in asset management
Download or read book Reliability and Risk Analysis written by Mohammad Modarres and published by CRC Press. This book was released on 2023-04-26 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emphasises an introduction and explanation of the practical methods used in reliability, and risk studies with a discussion of their uses and limitations Offers basic and advanced methods in reliability analysis that are commonly used in daily practice Provides methods that address unique topics such as dependent failure analysis, importance analysis, and analysis of repairable systems Presents a comprehensive overview of modern probabilistic life assessment methods such as Bayesian estimation, system reliability analysis, and human reliability Includes many ends of chapter problems, a tools website with computational codes, along with a solutions manual to support course adoptions
Download or read book Use Operation and Maintenance of Renewable Energy Systems written by Miguel A. Sanz-Bobi and published by Springer. This book was released on 2014-05-09 with total page 387 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the use, operation and maintenance of new renewable energy systems, taking into account their integration in the current electrical markets and in the new emergent uses of energy. The book is based on practical experiences which present different perspectives about what occurs once an energy production plant based on sources of renewable energy is in production. Questions to be addressed include: how the energy produced is integrated into the current system of energy production, what is its consideration in the electrical market, what the impact is on society, how differential the strategies of operation and maintenance are with respect to conventional systems of energy production, etc.
Download or read book Handbook of Silicon Based MEMS Materials and Technologies written by Markku Tilli and published by Elsevier. This book was released on 2009-12-08 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive guide to MEMS materials, technologies and manufacturing, examining the state of the art with a particular emphasis on current and future applications. Key topics covered include: - Silicon as MEMS material - Material properties and measurement techniques - Analytical methods used in materials characterization - Modeling in MEMS - Measuring MEMS - Micromachining technologies in MEMS - Encapsulation of MEMS components - Emerging process technologies, including ALD and porous silicon Written by 73 world class MEMS contributors from around the globe, this volume covers materials selection as well as the most important process steps in bulk micromachining, fulfilling the needs of device design engineers and process or development engineers working in manufacturing processes. It also provides a comprehensive reference for the industrial R&D and academic communities. - Veikko Lindroos is Professor of Physical Metallurgy and Materials Science at Helsinki University of Technology, Finland. - Markku Tilli is Senior Vice President of Research at Okmetic, Vantaa, Finland. - Ari Lehto is Professor of Silicon Technology at Helsinki University of Technology, Finland. - Teruaki Motooka is Professor at the Department of Materials Science and Engineering, Kyushu University, Japan. - Provides vital packaging technologies and process knowledge for silicon direct bonding, anodic bonding, glass frit bonding, and related techniques - Shows how to protect devices from the environment and decrease package size for dramatic reduction of packaging costs - Discusses properties, preparation, and growth of silicon crystals and wafers - Explains the many properties (mechanical, electrostatic, optical, etc), manufacturing, processing, measuring (incl. focused beam techniques), and multiscale modeling methods of MEMS structures
Download or read book Digital Avionics Handbook written by Cary Spitzer and published by CRC Press. This book was released on 2017-11-22 with total page 848 pages. Available in PDF, EPUB and Kindle. Book excerpt: A perennial bestseller, the Digital Avionics Handbook offers a comprehensive view of avionics. Complete with case studies of avionics architectures as well as examples of modern systems flying on current military and civil aircraft, this Third Edition includes: Ten brand-new chapters covering new topics and emerging trends Significant restructuring to deliver a more coherent and cohesive story Updates to all existing chapters to reflect the latest software and technologies Featuring discussions of new data bus and display concepts involving retina scanning, speech interaction, and synthetic vision, the Digital Avionics Handbook, Third Edition provides practicing and aspiring electrical, aerospace, avionics, and control systems engineers with a pragmatic look at the present state of the art of avionics.
