Download or read book Physics and Mechanics of New Materials and Their Applications written by Ivan A. Parinov and published by Springer Nature. This book was released on 2021-08-10 with total page 601 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected peer-reviewed contributions from the 2020 International Conference on “Physics and Mechanics of New Materials and Their Applications”, PHENMA 2020 (26–29 March 2021, Kitakyushu, Japan), focusing on processing techniques, physics, mechanics, and applications of advanced materials. The book describes a broad spectrum of promising nanostructures, crystal structures, materials, and composites with unique properties. It presents nanotechnological design approaches, environmental-friendly processing techniques, and physicochemical as well as mechanical studies of advanced materials. The selected contributions describe recent progress in computational materials science methods and algorithms (in particular, finite-element and finite-difference modelling) applied to various technological, mechanical, and physical problems. The presented results are important for ongoing efforts concerning the theory, modelling, and testing of advanced materials. Other results are devoted to promising devices with higher accuracy, increased longevity, and greater potential to work effectively under critical temperatures, high pressure, and in aggressive environments.

Download or read book Advanced Materials written by Ivan A. Parinov and published by Springer Nature. This book was released on 2020-06-16 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected peer-reviewed contributions from the 2019 International Conference on “Physics and Mechanics of New Materials and Their Applications”, PHENMA 2019 (Hanoi, Vietnam, 7–10 November, 2019), divided into four scientific themes: processing techniques, physics, mechanics, and applications of advanced materials. The book describes a broad spectrum of promising nanostructures, crystals, materials and composites with special properties. It presents nanotechnology approaches, modern environmentally friendly techniques and physical-chemical and mechanical studies of the structural-sensitive and physical–mechanical properties of materials. The obtained results are based on new achievements in material sciences and computational approaches, methods and algorithms (in particular, finite-element and finite-difference modeling) applied to the solution of different technological, mechanical and physical problems. The obtained results have a significant interest for theory, modeling and test of advanced materials. Other results are devoted to promising devices demonstrating high accuracy, longevity and new opportunities to work effectively under critical temperatures and high pressures, in aggressive media, etc. These devices demonstrate improved comparative characteristics, caused by developed materials and composites, allowing investigation of physio-mechanical processes and phenomena based on scientific and technological progress.

Download or read book Physics and Mechanics of New Materials and Their Applications written by Ivan A. Parinov and published by Springer Nature. This book was released on 2023-01-28 with total page 615 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents 50 selected peer-reviewed contributions from the 10th Anniversary International Conference on “Physics and Mechanics of New Materials and Their Applications”, PHENMA 2021-2022 (23-27 May, 2022, Divnomorsk, Russia), focusing on processing techniques, physics, mechanics, and applications of advanced materials. The book describes a broad spectrum of promising nanostructures, crystal structures, materials, and composites with unique properties. It presents nanotechnological design approaches, environmental-friendly processing techniques, and physicochemical as well as mechanical studies of advanced materials. The selected contributions describe recent progress in computational materials science methods and algorithms (in particular, finite-element and finite-difference modelling) applied to various technological, mechanical, and physical problems. The presented results are important for ongoing efforts concerning the theory, modelling, and testing of advanced materials. Other results are devoted to promising devices with higher accuracy, increased longevity, and greater potential to work effectively under critical temperatures, high pressure, and in aggressive environments.

Download or read book Advanced Materials written by Ivan A. Parinov and published by Springer. This book was released on 2019-07-03 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes selected, peer-reviewed contributions from the 2018 International Conference on “Physics and Mechanics of New Materials and Their Applications”, PHENMA 2018, held in Busan, South Korea, 9–11 August 2018. Focusing on manufacturing techniques, physics, mechanics, and applications of modern materials with special properties, it covers a broad spectrum of nanomaterials and structures, ferroelectrics and ferromagnetics, and other advanced materials and composites. The authors discuss approaches and methods in nanotechnology; newly developed, environmentally friendly piezoelectric techniques; and physical and mechanical studies of the microstructural and other properties of materials. Further, the book presents a range of original theoretical, experimental and computational methods and their application in the solution of various technological, mechanical and physical problems. Moreover, it highlights modern devices demonstrating high accuracy, longevity and the ability to operate over wide temperature and pressure ranges or in aggressive media. The developed devices show improved characteristics due to the use of advanced materials and composites, opening new horizons in the investigation of a variety of physical and mechanical processes and phenomena.

Download or read book Physics and Engineering of New Materials written by Do Tran Cat and published by Springer Science & Business Media. This book was released on 2009-01-01 with total page 387 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the majority of the contributions to the Tenth German-Vietnamese Seminar on Physics and Engineering (GVS10) that took place in the Gustav- Stresemann-Institut (GSI) in Bonn from June 6 to June 9, 2007. In the focus of these studies are the preparation and basic properties of new material systems, related investigation methods, and practical applications. Accordingly the sections in this book are entitled electrons: transport and confinement, low-dimensional systems, magnetism, oxidic materials, organic films, new materials, and methods. The series of German-Vietnamese seminars was initiated and sponsored by the Gottlieb Daimler- and Karl Benz -Foundation since 1998 and took place alt- nately in both countries. These bilateral meetings brought together top-notch senior and junior Vietnamese scientists with German Scientists and stimulated many contacts and co-operations. Under the general title “Physics and Engine- ing” the programs covered, in the form of keynote-lectures, oral presentations and posters, experimental and theoretical cutting-edge material-physics oriented topics. The majority of the contributions was dealing with modern topics of material science, particularly nanoscience, which is a research field of high importance also in Vietnam. Modern material science allows a quick transfer of research results to technical applications, which is very useful for fast developing countries like Vietnam. On the other hand, the seminars took profit from the strong cro- fertilization of the different disciplines of physics. This book is dedicated to the tenth anniversary of the seminars and nicely shows the scientific progress in Vietnam and the competitive level reached.

Download or read book Physics and Mechanics of New Materials and Their Applications written by Ivan A. Parinov and published by Springer Nature. This book was released on with total page 667 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Materials written by Ivan A. Parinov and published by Springer. This book was released on 2018-05-12 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected peer-reviewed contributions from the 2017 International Conference on “Physics and Mechanics of New Materials and Their Applications”, PHENMA 2017 (Jabalpur, India, 14–16 October, 2017), which is devoted to processing techniques, physics, mechanics, and applications of advanced materials. The book focuses on a wide spectrum of nanostructures, ferroelectric crystals, materials and composites as well as promising materials with special properties. It presents nanotechnology approaches, modern environmentally friendly piezoelectric and ferromagnetic techniques and physical and mechanical studies of the structural and physical–mechanical properties of materials. Various original mathematical and numerical methods are applied to the solution of different technological, mechanical and physical problems that are interesting from theoretical, modeling and experimental points of view. Further, the book highlights novel devices with high accuracy, longevity and extended capabilities to operate under wide temperature and pressure ranges and aggressive media, which show improved characteristics, thanks to the developed materials and composites, opening new possibilities for different physico-mechanical processes and phenomena.

Download or read book Advanced Materials written by Shun-Hsyung Chang and published by Springer Science & Business Media. This book was released on 2014-03-25 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced materials are the basis of modern science and technology. This proceedings volume presents a broad spectrum of studies of novel materials covering their processing techniques, physics, mechanics, and applications. The book is concentrated on nanostructures, ferroelectric crystals, materials and composites, materials for solar cells and also polymeric composites. Nanotechnology approaches, modern piezoelectric techniques and also latest achievements in materials science, condensed matter physics, mechanics of deformable solids and numerical methods are presented. Great attention is devoted to novel devices with high accuracy, longevity and extended possibilities to work in wide temperature and pressure ranges, aggressive media etc. The characteristics of materials and composites with improved properties opening new possibilities of various physical processes, in particular transmission and receipt of signals under water, are described.

Download or read book Advanced Materials written by Ivan A. Parinov and published by Springer. This book was released on 2021-06-17 with total page 621 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected peer-reviewed contributions from the 2019 International Conference on “Physics and Mechanics of New Materials and Their Applications”, PHENMA 2019 (Hanoi, Vietnam, 7–10 November, 2019), divided into four scientific themes: processing techniques, physics, mechanics, and applications of advanced materials. The book describes a broad spectrum of promising nanostructures, crystals, materials and composites with special properties. It presents nanotechnology approaches, modern environmentally friendly techniques and physical-chemical and mechanical studies of the structural-sensitive and physical–mechanical properties of materials. The obtained results are based on new achievements in material sciences and computational approaches, methods and algorithms (in particular, finite-element and finite-difference modeling) applied to the solution of different technological, mechanical and physical problems. The obtained results have a significant interest for theory, modeling and test of advanced materials. Other results are devoted to promising devices demonstrating high accuracy, longevity and new opportunities to work effectively under critical temperatures and high pressures, in aggressive media, etc. These devices demonstrate improved comparative characteristics, caused by developed materials and composites, allowing investigation of physio-mechanical processes and phenomena based on scientific and technological progress.

Download or read book Physics and Mechanics of New Materials and Their Applications written by Ivan A. Parinov and published by Nova Publishers. This book was released on 2014-05-14 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: The advanced materials and composites based on nanotechnology approaches, modern piezoelectric techniques, and also using the latest achievements of Materials Science, Condensed Matter Physics and Mechanics of Deformable Solids have found broad applications in modern science techniques and technologies. Tremendous interest is connected with fast development of theoretical, experimental and numerical methods which ensure obtaining new knowledge and are capable to control and give forecast on the development of critical phenomena and very fine processes. This edited book presents 30 selected reports of the Russian-Taiwanese Symposium "Physics and Mechanics of New Materials and Their Applications." These papers are divided into four scientific directions: (i) processing techniques of new materials, (ii) physics of new materials, (iii) mechanics of new materials, and (iv) applications of new materials. The book is addressed to students, post-graduate students, scientists and engineers taking part in R&D of nano-materials, ferro-piezoelectrics and related materials, and also different devices based on broad applications in different areas of modern science and technique.

Download or read book Physics of Materials written by Y. Quere and published by CRC Press. This book was released on 1998-06-23 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Few areas of science are as interdisciplinary as materials science. Chemistry, physics, mechanical engineering, and mathematics each play a part within it. The role of physics is to describe the objects, effects and phenomena at different scales (micro-, meso-, and macroscopic) as precisely as possible. Physics of Materials addresses this description at the elementary level. Based on an undergraduate level course taught at the Ecole Polytechnique, France, the main emphasis is on the conduction related phenomena (electronic properties) and the plastic behavior (ionic properties) of materials, such as metals and alloys, semiconductors, and ceramics. It assumes a basic grounding in statistical physics, quantum mechanics and elasticity but does not require prior knowledge of solid-state physics, to which it will serve as a useful introduction. The presentation of the course is followed by several examination problems, with solutions, which cover various specific applications of the general concepts and which will enable readers to test their understanding of these concepts.

Download or read book Strength of Materials written by J. P. Den Hartog and published by Courier Corporation. This book was released on 2012-06-28 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: In addition to coverage of customary elementary subjects (tension, torsion, bending, etc.), this introductory text features advanced material on engineering methods and applications, plus 350 problems and answers. 1949 edition.

Download or read book Advanced Materials written by Ivan A. Parinov and published by Springer. This book was released on 2015-12-14 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume presents selected and peer reviewed 50 reports of the 2015 International Conference on “Physics and Mechanics of New Materials and Their Applications” (Azov, Russia, 19-22 May, 2015), devoted to 100th Anniversary of the Southern Federal University, Russia. The book presents processing techniques, physics, mechanics, and applications of advanced materials. The book is concentrated on some nanostructures, ferroelectric crystals, materials and composites and other materials with specific properties. In this book are presented nanotechnology approaches, modern piezoelectric techniques, physical and mechanical studies of the structure-sensitive properties of the materials. A wide spectrum of mathematical and numerical methods is applied to the solution of different technological, mechanical and physical problems for applications. Great attention is devoted to novel devices with high accuracy, longevity and extended possibilities to work in a large scale of temperatures and pressure ranges, aggressive media, etc. The characteristics of materials and composites with improved properties is shown, and new possibilities in studying of various physico-mechanical processes and phenomena are demonstrated.

Download or read book Introduction to the Physics and Chemistry of Materials written by Robert J. Naumann and published by CRC Press. This book was released on 2008-12-22 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discusses the Structure and Properties of Materials and How These Materials Are Used in Diverse ApplicationsBuilding on undergraduate students' backgrounds in mathematics, science, and engineering, Introduction to the Physics and Chemistry of Materials provides the foundation needed for more advanced work in materials science. Ideal for a two-semes

Download or read book Advanced Quantum Mechanics written by Rainer Dick and published by Springer Science & Business Media. This book was released on 2012-01-11 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Quantum Mechanics: Materials and Photons is a textbook which emphasizes the importance of advanced quantum mechanics for materials science and all experimental techniques which employ photon absorption, emission, or scattering. Important aspects of introductory quantum mechanics are covered in the first seven chapters to make the subject self-contained and accessible for a wide audience. The textbook can therefore be used for advanced undergraduate courses and introductory graduate courses which are targeted towards students with diverse academic backgrounds from the Natural Sciences or Engineering. To enhance this inclusive aspect of making the subject as accessible as possible, Appendices A and B also provide introductions to Lagrangian mechanics and the covariant formulation of electrodynamics. Other special features include an introduction to Lagrangian field theory and an integrated discussion of transition amplitudes with discrete or continuous initial or final states. Once students have acquired an understanding of basic quantum mechanics and classical field theory, canonical field quantization is easy. Furthermore, the integrated discussion of transition amplitudes naturally leads to the notions of transition probabilities, decay rates, absorption cross sections and scattering cross sections, which are important for all experimental techniques that use photon probes. Quantization is first discussed for the Schrödinger field before the relativistic Maxwell, Klein-Gordon and Dirac fields are quantized. Quantized Schrödinger field theory is not only important for condensed matter physics and materials science, but also provides the easiest avenue to general field quantization and is therefore also useful for students with an interest in nuclear and particle physics. The quantization of the Maxwell field is performed in Coulomb gauge. This is the appropriate and practically most useful quantization procedure in condensed matter physics, chemistry, and materials science because it naturally separates the effects of Coulomb interactions, exchange interactions, and photon scattering. The appendices contain additional material that is usually not found in standard quantum mechanics textbooks, including a completeness proof of eigenfunctions of one-dimensional Sturm-Liouville problems, logarithms of matrices, and Green's functions in different dimensions.

Download or read book Physics and Mechanics of New Materials written by Ana Cristina Faria Ribeiro and published by Apple Academic Press. This book was released on 2024-11-29 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Details advances in materials science and engineering technology. Covers their usefulness in design, fabrication, testing, and industrial application of advanced materials and structures. Discusses impact of technological change upon the application of selected materials and energy resources and their uses along with case studies.

Download or read book Proceedings of the 2017 International Conference on Physics Mechanics of New Materials and Their Applications written by Ivan A. Parinov and published by Nova Science Publishers. This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced materials and composites play a very important role in prospective directions of modern science and technology, defining the quick development of technique and industry. Intense chemical, physical, and mechanical R&D of modern numerical approaches and methods of mathematical modeling are necessary for development and improvement of material properties. These PHENMA 2017 Proceedings are devoted to the development and solution seeking of different actual problems into a framework of the pointed research directions. The book presents new results of internationally recognized scientific teams in the fields of materials science, physics, mechanics, manufacturing techniques and technologies of advanced materials, operating in diapasons from the nanometer level to the macroscopic level. The proposed theoretical and experimental methods are devoted to new approaches and methods for fabrication of nanomaterials, (environmentally-friendly) piezoelectrics, magnetic and other advanced materials and composites. In particular, this book presents new results of theoretical and experimental analysis of advanced materials and devices with previously given and improved characteristics, developed on the basis of methods of electric elasticity and physics of condensed matter. Our results cover numerical approaches (in particular, finite-element, finite-difference and boundary-element modeling) developed on the basis of original computer software, demonstrating new fascinating results for advanced materials and devices. The developed materials with special properties and novel devices demonstrate higher and improved properties in comparison with corresponding characteristics of the competitive publications. In the result, it gives a new knowledge, which is necessary for numerous applications. The developed theoretical, computational and test methods, manufactured experimental devices and setups possess significant possibilities and demonstrate improvements in the study of various structure-sensitive properties of solids and media. This collection presents selected reports of the 2017 International Conference on Physics, Mechanics of New Materials and Their Applications (PHENMA 2017, October 14-16, 2017, Jabalpur, India), http://phenma2017.math.sfedu.ru; http://phenma2017.iiitdmj.ac.in. This book is addressed to students, post-graduate students, scientists and engineers that are studying and developing a new generation of nanomaterials and nanostructures, piezoelectrics and magnetic materials, other promising materials, and also various devices, manufactured on their base and intended for numerous applications in various regions of science, technique and technology. This book presents new investigations and scientific results in condensed matter physics, materials science, physical and mechanical experiments, processing techniques and engineering of nanomaterials, piezoelectrics, ferromagnetics and other advanced materials and composites, numerical methods, and various promising applications (including industrial) and developed devices.