Download or read book Physical Security Reliability Standard Us Federal Energy Regulatory Commission Regulation Ferc 2018 Edition written by The Law The Law Library and published by Createspace Independent Publishing Platform. This book was released on 2018-10-14 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physical Security Reliability Standard (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition) The Law Library presents the complete text of the Physical Security Reliability Standard (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition). Updated as of May 29, 2018 The Federal Energy Regulatory Commission (Commission) approves Reliability Standard CIP-014-1 (Physical Security). The North American Electric Reliability Corporation, the Commission-certified Electric Reliability Organization, submitted Reliability Standard CIP-014-1 for Commission approval in response to a Commission order issued on March 7, 2014. The purpose of Reliability Standard CIP-014-1 is to enhance physical security measures for the most critical Bulk-Power System facilities and thereby lessen the overall vulnerability of the Bulk-Power System against physical attacks. In addition, the Commission directs NERC to develop one modification to Reliability Standard CIP-014-1 and submit an informational filing. This book contains: - The complete text of the Physical Security Reliability Standard (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition) - A table of contents with the page number of each section
Download or read book Critical Infrastructure Protection Reliability Standards Us Federal Energy Regulatory Commission Regulation Ferc 2018 Edition written by The Law The Law Library and published by Createspace Independent Publishing Platform. This book was released on 2018-10-06 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt: Critical Infrastructure Protection Reliability Standards (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition) The Law Library presents the complete text of the Critical Infrastructure Protection Reliability Standards (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition). Updated as of May 29, 2018 The Federal Energy Regulatory Commission (Commission) approves seven critical infrastructure protection (CIP) Reliability Standards: CIP-003-6 (Security Management Controls), CIP-004-6 (Personnel and Training), CIP-006-6 (Physical Security of BES Cyber Systems), CIP-007-6 (Systems Security Management), CIP-009-6 (Recovery Plans for BES Cyber Systems), CIP-010-2 (Configuration Change Management and Vulnerability Assessments), and CIP-011-2 (Information Protection). The proposed Reliability Standards address the cyber security of the bulk electric system and improve upon the current Commission-approved CIP Reliability Standards. In addition, the Commission directs NERC to develop certain modifications to improve the CIP Reliability Standards. This book contains: - The complete text of the Critical Infrastructure Protection Reliability Standards (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition) - A table of contents with the page number of each section
Download or read book Version 5 Critical Infrastructure Protection Reliability Standards Us Federal Energy Regulatory Commission Regulation Ferc 2018 Edition written by The Law The Law Library and published by Createspace Independent Publishing Platform. This book was released on 2018-10-16 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt: Version 5 Critical Infrastructure Protection Reliability Standards (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition) The Law Library presents the complete text of the Version 5 Critical Infrastructure Protection Reliability Standards (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition). Updated as of May 29, 2018 Pursuant to section 215 of the Federal Power Act, the Commission approves the Version 5 Critical Infrastructure Protection Reliability Standards, CIP-002-5 through CIP-011-1, submitted by the North American Electric Reliability Corporation (NERC), the Commission-certified Electric Reliability Organization. The CIP version 5 Standards address the cyber security of the bulk electric system and are an improvement over the current Commission-approved CIP Reliability Standards. The CIP version 5 Standards adopt new cyber security controls and extend the scope of the systems that are protected by the CIP Reliability Standards. The Commission also approves nineteen new or revised definitions associated with the CIP version 5 Standards for inclusion in the Glossary of Terms Used in NERC Reliability Standards. In addition, the Commission directs NERC to develop modifications to the CIP version 5 Standards and submit informational filings. This book contains: - The complete text of the Version 5 Critical Infrastructure Protection Reliability Standards (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition) - A table of contents with the page number of each section
Download or read book Revised Critical Infrastructure Protection Reliability Standards US Federal Energy Regulatory Commission Regulation FERC 2018 Edition written by The Law The Law Library and published by Createspace Independent Publishing Platform. This book was released on 2018-10-15 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt: Revised Critical Infrastructure Protection Reliability Standards (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition) The Law Library presents the complete text of the Revised Critical Infrastructure Protection Reliability Standards (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition). Updated as of May 29, 2018 The Federal Energy Regulatory Commission (Commission) directs the North American Electric Reliability Corporation to develop a new or modified Reliability Standard that addresses supply chain risk management for industrial control system hardware, software, and computing and networking services associated with bulk electric system operations. The new or modified Reliability Standard is intended to mitigate the risk of a cybersecurity incident affecting the reliable operation of the Bulk-Power System. This book contains: - The complete text of the Revised Critical Infrastructure Protection Reliability Standards (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition) - A table of contents with the page number of each section
Download or read book Protection System Maintenance Reliability Standard Us Federal Energy Regulatory Commission Regulation Ferc 2018 Edition written by The Law The Law Library and published by Createspace Independent Publishing Platform. This book was released on 2018-10-14 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt: Protection System Maintenance Reliability Standard (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition) The Law Library presents the complete text of the Protection System Maintenance Reliability Standard (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition). Updated as of May 29, 2018 Under section 215 of the Federal Power Act (FPA), the Federal Energy Regulatory Commission (Commission) approves a revised Reliability Standard, PRC-005-2-Protection System Maintenance, to supersede four existing Reliability Standards, PRC-005-1.1b (Transmission and Generation Protection System Maintenance and Testing), PRC-008-0 (Underfrequency Load Shedding Equipment Maintenance), PRC-011-0 (Undervoltage Load Shedding Equipment Maintenance) and PRC-017-0 (Special Protection System Maintenance and Testing). This book contains: - The complete text of the Protection System Maintenance Reliability Standard (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition) - A table of contents with the page number of each section
Download or read book Version 4 Critical Infrastructure Protection Reliability Standards Us Federal Energy Regulatory Commission Regulation Ferc 2018 Edition written by The Law The Law Library and published by Createspace Independent Publishing Platform. This book was released on 2018-10-16 with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt: Version 4 Critical Infrastructure Protection Reliability Standards (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition) The Law Library presents the complete text of the Version 4 Critical Infrastructure Protection Reliability Standards (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition). Updated as of May 29, 2018 Under section 215 of the Federal Power Act, the Federal Energy Regulatory Commission (Commission) approves eight modified Critical Infrastructure Protection (CIP) Reliability Standards, CIP-002-4 through CIP-009-4, developed and submitted to the Commission for approval by the North American Electric Reliability Corporation (NERC), the Electric Reliability Organization certified by the Commission. The CIP Reliability Standards provide a cybersecurity framework for the identification and protection of "Critical Cyber Assets" to support the reliable operation of the Bulk-Power System. Reliability Standard CIP-002-4 requires the identification and documentation of Critical Cyber Assets associated with "Critical Assets" that support the reliable operation of the Bulk-Power System and introduces "bright line" criteria for the identification of Critical Assets. The Commission approves the related Violation Risk Factors, Violation Severity Levels with modifications, implementation plan, and effective date proposed by NERC. This book contains: - The complete text of the Version 4 Critical Infrastructure Protection Reliability Standards (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition) - A table of contents with the page number of each section
Download or read book Mandatory Reliability Standards for Critical Infrastructure Protection Us Federal Energy Regulatory Commission Regulation Ferc 2018 Edition written by The Law The Law Library and published by Createspace Independent Publishing Platform. This book was released on 2018-10-08 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mandatory Reliability Standards for Critical Infrastructure Protection (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition) The Law Library presents the complete text of the Mandatory Reliability Standards for Critical Infrastructure Protection (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition). Updated as of May 29, 2018 The Commission clarifies that the facilities within a nuclear generation plant in the United States that are not regulated by the U.S. Nuclear Regulatory Commission are subject to compliance with the eight mandatory "CIP" Reliability Standards approved in Commission Order No. 706. This book contains: - The complete text of the Mandatory Reliability Standards for Critical Infrastructure Protection (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition) - A table of contents with the page number of each section
Download or read book Retirement of Requirements in Reliability Standards Us Federal Energy Regulatory Commission Regulation Ferc 2018 Edition written by The Law The Law Library and published by Createspace Independent Publishing Platform. This book was released on 2018-10-15 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: Retirement of Requirements in Reliability Standards (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition) The Law Library presents the complete text of the Retirement of Requirements in Reliability Standards (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition). Updated as of May 29, 2018 Pursuant to section 215 of the Federal Power Act, the Commission approves the retirement of 34 requirements within 19 Reliability Standards identified by the North American Electric Reliability Corporation (NERC), the Commission-certified Electric Reliability Organization. The requirements approved for retirement either: Provide little protection for Bulk-Power System reliability; or are redundant with other aspects of the Reliability Standards. In addition, the Commission withdraws 41 Commission directives that NERC develop modifications to Reliability Standards. This rule is part of the Commission's ongoing effort to review its requirements and reduce unnecessary burdens by eliminating requirements that are not necessary to the performance of the Commission's regulatory responsibilities. This book contains: - The complete text of the Retirement of Requirements in Reliability Standards (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition) - A table of contents with the page number of each section
Download or read book Revised Critical Infrastructure Protection Reliability Standard CIP 003 7 Cyber Security Security Management Controls US Federal Energy Regulatory Commission Regulation FERC 2018 Edition written by The Law The Law Library and published by Createspace Independent Publishing Platform. This book was released on 2018-10-15 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt: Revised Critical Infrastructure Protection Reliability Standard CIP-003-7-Cyber Security-Security Management Controls (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition) The Law Library presents the complete text of the Revised Critical Infrastructure Protection Reliability Standard CIP-003-7-Cyber Security-Security Management Controls (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition). Updated as of May 29, 2018 The Federal Energy Regulatory Commission (Commission) approves Critical Infrastructure Protection (CIP) Reliability Standard CIP-003-7 (Cyber Security-Security Management Controls), submitted by the North American Electric Reliability Corporation (NERC). Reliability Standard CIP-003-7 clarifies the obligations pertaining to electronic access control for low impact BES Cyber Systems; requires mandatory security controls for transient electronic devices (e.g., thumb drives, laptop computers, and other portable devices frequently connected to and disconnected from systems) used at low impact BES Cyber Systems; and requires responsible entities to have a policy for declaring and responding to CIP Exceptional Circumstances related to low impact BES Cyber Systems. In addition, the Commission directs NERC to develop modifications to the CIP Reliability Standards to mitigate the risk of malicious code that could result from third-party transient electronic devices. This book contains: - The complete text of the Revised Critical Infrastructure Protection Reliability Standard CIP-003-7-Cyber Security-Security Management Controls (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition) - A table of contents with the page number of each section
Download or read book Mandatory Reliability Standards for the Bulk Power System Us Federal Energy Regulatory Commission Regulation Ferc 2018 Edition written by The Law The Law Library and published by Createspace Independent Publishing Platform. This book was released on 2018-10-14 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mandatory Reliability Standards for the Bulk-Power System (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition) The Law Library presents the complete text of the Mandatory Reliability Standards for the Bulk-Power System (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition). Updated as of May 29, 2018 Pursuant to section 215 of the Federal Power Act (FPA), the Commission approves 83 of 107 proposed Reliability Standards, six of the eight proposed regional differences, and the Glossary of Terms Used in Reliability Standards developed by the North American Electric Reliability Corporation (NERC), which the Commission has certified as the Electric Reliability Organization (ERO) responsible for developing and enforcing mandatory Reliability Standards. Those Reliability Standards meet the requirements of section 215 of the FPA and Part 39 of the Commission's regulations. However, although we believe it is in the public interest to make these Reliability Standards mandatory and enforceable, we also find that much work remains to be done. Specifically, we believe that many of these Reliability Standards require significant improvement to address, among other things, the recommendations of the Blackout Report. Therefore, pursuant to section 215(d)(5), we require the ERO to submit significant improvements to 56 of the 83 Reliability Standards that are being approved as mandatory and enforceable. The remaining 24 Reliability Standards will remain pending at the Commission until further information is provided. This book contains: - The complete text of the Mandatory Reliability Standards for the Bulk-Power System (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition) - A table of contents with the page number of each section
Download or read book Version One Regional Reliability Standards Facilities Design Connections and Maintenance Protection and Control and Voltage Us Federal Energy Regulatory Commission Regulation Ferc 2018 Edition written by The Law The Law Library and published by Createspace Independent Publishing Platform. This book was released on 2018-10-16 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt: Version One Regional Reliability Standards - Facilities Design, Connections, and Maintenance - Protection and Control and Voltage (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition) The Law Library presents the complete text of the Version One Regional Reliability Standards - Facilities Design, Connections, and Maintenance - Protection and Control and Voltage (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition). Updated as of May 29, 2018 Under section 215 of the Federal Power Act, the Commission hereby approves four revised regional Reliability Standards developed by the Western Electricity Coordinating Council and approved by the North American Electric Reliability Corporation, which the Commission has certified as the Electric Reliability Organization responsible for developing and enforcing mandatory Reliability Standards. These regional Reliability Standards have been designated by the Western Electricity Coordinating Council as FAC-501-WECC-1-Transmission Maintenance, PRC-004-WECC-1-Protection System and Remedial Action Scheme Misoperation, VAR-002-WECC-1-Automatic Voltage Regulators, and VAR-501-WECC-1-Power System Stabilizer. Reliability Standard FAC-501-WECC-1 addresses transmission maintenance for specified transmission paths in the Western Interconnection. Reliability Standard PRC-004-WECC-1 addresses the analysis of misoperations that occur on transmission and generation protection systems and remedial action schemes in the Western Interconnection. Reliability Standard VAR-002-WECC-1 is meant to ensure that automatic voltage regulators remain in service on synchronous generators and condensers in the Western Interconnection. Reliability Standard VAR-501-WECC-1 is meant to ensure that power system stabilizers remain in service on synchronous generators in the Western Interconnection. In addition, the Commission approves five new regional definitions applicable within the Western Interconnection. This book contains: - The complete text of the Version One Regional Reliability Standards - Facilities Design, Connections, and Maintenance - Protection and Control and Voltage (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition) - A table of contents with the page number of each section
Download or read book Version One Regional Reliability Standard for Resource and Demand Balancing Us Federal Energy Regulatory Commission Regulation Ferc 2018 Edition written by The Law The Law Library and published by Createspace Independent Publishing Platform. This book was released on 2018-10-16 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: Version One Regional Reliability Standard for Resource and Demand Balancing (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition) The Law Library presents the complete text of the Version One Regional Reliability Standard for Resource and Demand Balancing (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition). Updated as of May 29, 2018 Under section 215 of the Federal Power Act, the Commission hereby remands a revised regional Reliability Standard developed by the Western Electricity Coordinating Council and approved by the North American Electric Reliability Corporation, which the Commission has certified as the Electric Reliability Organization responsible for developing and enforcing mandatory Reliability Standards. The revised regional Reliability Standard, designated by WECC as BAL-002-WECC-1, would set revised Contingency Reserve requirements meant to maintain scheduled frequency and avoid loss of firm load following transmission or generation contingencies. This book contains: - The complete text of the Version One Regional Reliability Standard for Resource and Demand Balancing (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition) - A table of contents with the page number of each section
Download or read book Mandatory Reliability Standards for Interconnection Reliability Operating Limits Us Federal Energy Regulatory Commission Regulation Ferc 2018 Edition written by The Law The Law Library and published by Createspace Independent Publishing Platform. This book was released on 2018-10-08 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mandatory Reliability Standards for Interconnection Reliability Operating Limits (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition) The Law Library presents the complete text of the Mandatory Reliability Standards for Interconnection Reliability Operating Limits (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition). Updated as of May 29, 2018 Under section 215 of the Federal Power Act, the Federal Energy Regulatory Commission (Commission) approves three new Interconnection Reliability Operations and Coordination Reliability Standards and seven revised Reliability Standards related to Emergency Preparedness and Operations, Interconnection Reliability Operations and Coordination, and Transmission Operations. These Reliability Standards were submitted to the Commission for approval by the North American Electric Reliability Corporation (NERC), which the Commission has certified as the Electric Reliability Organization responsible for developing and enforcing mandatory Reliability Standards. The Reliability Standards were designed to prevent instability, uncontrolled separation, or cascading outages that adversely impact the reliability of the interconnection by ensuring that the reliability coordinator has the data necessary to assess its reliability coordinator area during the operations horizon and that it takes prompt action to prevent or mitigate instances of exceeding Interconnection Reliability. This book contains: - The complete text of the Mandatory Reliability Standards for Interconnection Reliability Operating Limits (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition) - A table of contents with the page number of each section
Download or read book Rules Concerning Certification of the Electric Reliability Organization And Procedures for the Establishment Approval and Enforcement Us Federal Energy Regulatory Commission Regulation Ferc 2018 Edition written by The Law The Law Library and published by Createspace Independent Publishing Platform. This book was released on 2018-10-15 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rules Concerning Certification of the Electric Reliability Organization - and Procedures for the Establishment, Approval, and Enforcement (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition) The Law Library presents the complete text of the Rules Concerning Certification of the Electric Reliability Organization - and Procedures for the Establishment, Approval, and Enforcement (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition). Updated as of May 29, 2018 Pursuant to Subtitle A (Reliability Standards) of the Electricity Modernization Act of 2005, which is Title XII of the Energy Policy Act of 2005 (EPAct) and which added a new section 215 to the Federal Power Act (FPA), the Commission is amending its regulations to incorporate: Criteria that an entity must satisfy to qualify to be the Electric Reliability Organization (ERO) which the Commission will certify as the organization that will propose and enforce Reliability Standards for the Bulk-Power System in the United States, subject to Commission approval; procedures under which the ERO may propose new or modified Reliability Standards for Commission review; a process for timely resolution of any conflict between a Reliability Standard and a Commission-approved tariff or order; a process for resolution of an inconsistency between a state action and a Reliability Standard; regulations pertaining to the funding of the ERO; procedures governing an enforcement action by the ERO, a Regional Entity or the Commission; criteria under which the ERO may enter into an agreement to delegate authority to a Regional Entity for the purpose of proposing Reliability Standards to the ERO and enforcing Reliability Standards; regulations governing the issuance of periodic reliability reports by the ERO that assess the reliability and adequacy of the Bulk-Power System in North America; and procedures for the establishment of Regional Advisory Bodies that may provide advice to the Commission, the ERO or a Regional Entity on matters of governance, applicable Reliability Standards, the reasonableness of proposed fees within a region, and any other responsibilities requested by the Commission. This book contains: - The complete text of the Rules Concerning Certification of the Electric Reliability Organization - and Procedures for the Establishment, Approval, and Enforcement (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition) - A table of contents with the page number of each section
Download or read book Generator Verification Reliability Standards Us Federal Energy Regulatory Commission Regulation Ferc 2018 Edition written by The Law The Law Library and published by Createspace Independent Publishing Platform. This book was released on 2018-10-08 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt: Generator Verification Reliability Standards (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition) The Law Library presents the complete text of the Generator Verification Reliability Standards (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition). Updated as of May 29, 2018 Pursuant to section 215 of the Federal Power Act, the Federal Energy Regulatory Commission (Commission) approves the following Reliability Standards that were submitted to the Commission for approval by the North American Electric Reliability Corporation, the Commission-certified Electric Reliability Organization: MOD-025-2 (Verification and Data Reporting of Generator Real and Reactive Power Capability and Synchronous Condenser Reactive Power Capability), MOD-026-1 (Verification of Models and Data for Generator Excitation Control System or Plant Volt/Var Control Functions), MOD-027-1(Verification of Models and Data for Turbine/Governor and Load Control or Active Power/Frequency Control Functions), PRC-019-1 (Coordination of Generating Unit or Plant Capabilities, Voltage Regulating Controls, and Protection), and PRC-024-1 (Generator Frequency and Voltage Protective Relay Settings). The generator verification Reliability Standards help ensure that verified data is available for power system planning and operational studies by requiring the verification of generator equipment and capability needed to support Bulk-Power System reliability and promoting the coordination of important protection system settings. This book contains: - The complete text of the Generator Verification Reliability Standards (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition) - A table of contents with the page number of each section
Download or read book Mandatory Reliability Standard for Nuclear Plant Interface Coordination Us Federal Energy Regulatory Commission Regulation Ferc 2018 Edition written by The Law The Law Library and published by Createspace Independent Publishing Platform. This book was released on 2018-10-08 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mandatory Reliability Standard for Nuclear Plant Interface Coordination (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition) The Law Library presents the complete text of the Mandatory Reliability Standard for Nuclear Plant Interface Coordination (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition). Updated as of May 29, 2018 Pursuant to section 215 of the Federal Power Act (FPA), the Commission approves the Nuclear Plant Interface Coordination Reliability Standard developed by the North American Electric Reliability Corporation (NERC). In addition, pursuant to section 215(d)(5) of the FPA, the Commission directs NERC to develop a modification to the Reliability Standard to address a specific concern. The Reliability Standard requires a nuclear plant generator operator and its suppliers of back-up power and related transmission and/or distribution services to coordinate concerning nuclear licensing requirements for safe nuclear plant operation and shutdown and system operating limits. The Commission also approves four related definitions for addition to the NERC Glossary of Terms, and directs various changes to proposed violation risk factors, which measure the potential impact of violations of the Reliability Standard on the reliability of the Bulk-Power System. This book contains: - The complete text of the Mandatory Reliability Standard for Nuclear Plant Interface Coordination (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition) - A table of contents with the page number of each section
Download or read book Balancing Authority Control Inadvertent Interchange and Facility Interconnection Reliability Standards Us Federal Energy Regulatory Commission Regulation Ferc 2018 Edition written by The Law The Law Library and published by Createspace Independent Publishing Platform. This book was released on 2018-10-06 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt: Balancing Authority Control, Inadvertent Interchange, and Facility Interconnection Reliability Standards (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition) The Law Library presents the complete text of the Balancing Authority Control, Inadvertent Interchange, and Facility Interconnection Reliability Standards (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition). Updated as of May 29, 2018 The Federal Energy Regulatory Commission (Commission) approves Reliability Standards BAL-005-1 (Balancing Authority Control) and FAC-001-3 (Facility Interconnection Requirements), submitted by the North American Electric Reliability Corporation, as well as the retirement of Reliability Standards BAL-005-0.2b (Automatic Generation Control), FAC-001-2 (Facility Interconnection Requirements), and BAL-006-2 (Inadvertent Interchange). This book contains: - The complete text of the Balancing Authority Control, Inadvertent Interchange, and Facility Interconnection Reliability Standards (US Federal Energy Regulatory Commission Regulation) (FERC) (2018 Edition) - A table of contents with the page number of each section
