Download or read book Physical Properties of Uranium Process Solutions written by Robert S. Ondrejcin and published by . This book was released on 1961 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integral diffusion coefficients, viscosities, densities, and surface tensions were measured for the aqueous uranyl nitrate - nitric acid - aluminum nitrate system. The variation of the uranium diffusion coefficient was determined as a function of uranium concentration, nitric acid concentration, and temperature.
Download or read book Uranium Processing and Properties written by Jonathan S. Morrell and published by Springer Science & Business Media. This book was released on 2013-07-22 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Uranium Processing and Properties describes developments in uranium science, engineering and processing and covers a broad spectrum of topics and applications in which these technologies are harnessed. This book offers the most up-to-date knowledge on emerging nuclear technologies and applications while also covering new and established practices for working with uranium supplies. The book also aims to provide insights into current research and processing technology developments in order to stimulate and motivate innovation among readers. Topics covered include casting technology, plate and sheet rolling, machining of uranium and uranium alloys, forming and fabrication techniques, corrosion kinetics, nondestructive evaluation and thermal modeling.
Download or read book PHYSICAL PROPERTIES OF URANIUM PROCESS SOLUTIONS written by and published by . This book was released on 1961 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Integral diffusion coefficients, viscosities, densities, and surface tensions were measured for the aqueous uranyl nitrate --nitric acid--aluminum nitrate system. The variation of the uranium diffusion coefficient was determined as as a function of uranium concentration, nitric acid concentration, and temperature. (auth).
Download or read book The Metallurgy of Nuclear Fuel written by V. S. Yemel'Yanov and published by Elsevier. This book was released on 2013-10-22 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Metallurgy of Nuclear Fuel: Properties and Principles of the Technology of Uranium, Thorium and Plutonium is a systematic analysis of the metallurgy of nuclear fuel, with emphasis on the physical, mechanical, and chemical properties as well as the technology of uranium, thorium, and plutonium, together with their alloys and compounds. The minerals and raw material sources of nuclear fuel are discussed, along with the principles of the technology of the raw material processing and the production of the principal compounds, and of the pure metals and alloys. Comprised of three parts, this volume begins with an introduction to the history of the discovery of uranium and its position in the periodic system; its use as a nuclear fuel; radioactivity and isotopic composition; alloys and compounds; and physical, mechanical, and chemical properties. The effect of mechanical and thermal treatment, thermal cycling and irradiation on the physicochemical properties of uranium is also examined. The next two sections are devoted to thorium and plutonium and includes chapters dealing with their uses, alloys and compounds, and methods of recovery and purification. This book is written for university students, but should also prove useful to young production engineers and scientific workers who are concerned with problems in the metallurgy of nuclear fuel.
Download or read book Analytical Techniques in Uranium Exploration and Ore Processing written by International Atomic Energy Agency and published by . This book was released on 1992 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Uranium Enrichment and Nuclear Weapon Proliferation written by Allan S. Krass and published by Routledge. This book was released on 2020-11-20 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: Originally published in 1983, this book presents both the technical and political information necessary to evaluate the emerging threat to world security posed by recent advances in uranium enrichment technology. Uranium enrichment has played a relatively quiet but important role in the history of efforts by a number of nations to acquire nuclear weapons and by a number of others to prevent the proliferation of nuclear weapons. For many years the uranium enrichment industry was dominated by a single method, gaseous diffusion, which was technically complex, extremely capital-intensive, and highly inefficient in its use of energy. As long as this remained true, only the richest and most technically advanced nations could afford to pursue the enrichment route to weapon acquisition. But during the 1970s this situation changed dramatically. Several new and far more accessible enrichment techniques were developed, stimulated largely by the anticipation of a rapidly growing demand for enrichment services by the world-wide nuclear power industry. This proliferation of new techniques, coupled with the subsequent contraction of the commercial market for enriched uranium, has created a situation in which uranium enrichment technology might well become the most important contributor to further nuclear weapon proliferation. Some of the issues addressed in this book are: A technical analysis of the most important enrichment techniques in a form that is relevant to analysis of proliferation risks; A detailed projection of the world demand for uranium enrichment services; A summary and critique of present institutional non-proliferation arrangements in the world enrichment industry, and An identification of the states most likely to pursue the enrichment route to acquisition of nuclear weapons.
Download or read book Medical Isotope Production Without Highly Enriched Uranium written by National Research Council and published by National Academies Press. This book was released on 2009-06-27 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the product of a congressionally mandated study to examine the feasibility of eliminating the use of highly enriched uranium (HEU2) in reactor fuel, reactor targets, and medical isotope production facilities. The book focuses primarily on the use of HEU for the production of the medical isotope molybdenum-99 (Mo-99), whose decay product, technetium-99m3 (Tc-99m), is used in the majority of medical diagnostic imaging procedures in the United States, and secondarily on the use of HEU for research and test reactor fuel. The supply of Mo-99 in the U.S. is likely to be unreliable until newer production sources come online. The reliability of the current supply system is an important medical isotope concern; this book concludes that achieving a cost difference of less than 10 percent in facilities that will need to convert from HEU- to LEU-based Mo-99 production is much less important than is reliability of supply.
Download or read book Chemical Thermodynamics of Uranium written by Ingmar Grenthe and published by Elsevier Science & Technology. This book was released on 1992 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides a comprehensive overview on the chemical thermodynamics of those elements that are of particular importance in the safety assessment of radioactive waste disposal systems. This is the first volume in a series of critical reviews to be published on this subject. The book provides an extensive compilation of chemical thermodynamic data for uranium. A description of procedures for activity corrections and uncertainty estimates is given. A critical discussion of data needed for nuclear waste management assessments, including areas where significant gaps of knowledge exist is presented. A detailed inventory of chemical thermodynamic data for inorganic compounds and complexes of uranium is listed. Data and their uncertainty limits are recommended for 74 aqueous complexes and 199 solid and 31 gaseous compounds containing uranium, and on 52 aqueous and 17 solid auxiliary species containing no uranium. The data are internally consistent and compatible with the CODATA Key Values. The book contains a detailed discussion of procedures used for activity factor corrections in aqueous solution, as well as including methods for making uncertainty estimates.
Download or read book Uranium Plutonium Transplutonic Elements written by Harold C. Hodge and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 1037 pages. Available in PDF, EPUB and Kindle. Book excerpt: More than a year ago the three editors sat down at a table and worked out a set of six chapter headings which they believed might serve, in turn, for each of the three sections of this handbook. (The reader will note a similarity in order of presentation and in emphasis.) However, as our editorial plans progressed it became apparent that for each element and for the element group, there were one or two special topics appropiate for that section alone. Accordingly, in the section on uranium the common pattern holds for Chaps. 1 through 6 which include: an introduction (Chap. 1), a discussion of the physical and chemical properties (Chap. 2), experimental data on animals (Chap. 3), ex perimental data on man (Chap. 4), the rationale and development of air con centration limits to control industrial worker exposure (Chap. 5), and the prac tical problems of applying such limits in the uranium industry (Chap. 6). Chap. 7 entitled "Uranium Mining Hazards" is the subject category which is special for uranium; the chapter brings up to date the account of an important occupational hazard which was first noted by GEORGIUS AGRICOLA (1490-1555).
Download or read book Production of Yellow Cake and Uranium Fluorides written by International Atomic Energy Agency and published by . This book was released on 1980 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nature s Building Blocks written by John Emsley and published by Oxford University Press, USA. This book was released on 2003 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: A readable, informative, fascinating entry on each one of the 100-odd chemical elements, arranged alphabetically from actinium to zirconium. Each entry comprises an explanation of where the element's name comes from, followed by Body element (the role it plays in living things), Element ofhistory (how and when it was discovered), Economic element (what it is used for), Environmental element (where it occurs, how much), Chemical element (facts, figures and narrative), and Element of surprise (an amazing, little-known fact about it). A wonderful 'dipping into' source for the familyreference shelf and for students.
Download or read book Metals from Ores written by Fathi Habashi and published by Sainte Foy, Québec : Métallurgie Extractive Québec. This book was released on 2003 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Uranium Extraction Technology written by International Atomic Energy Agency and published by . This book was released on 1993 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this publication is to update and expand the first edition, which was published in 1983, and to report on later advances in uranium ore processing. It includes background information about the principles of the unit operations used in uranium ore processing and summarizes the current state of the art. Extensive references provide sources for specific technological details.
Download or read book Molybdenum 99 for Medical Imaging written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2016-11-28 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: The decay product of the medical isotope molybdenum-99 (Mo-99), technetium-99m (Tc-99m), and associated medical isotopes iodine-131 (I-131) and xenon-133 (Xe-133) are used worldwide for medical diagnostic imaging or therapy. The United States consumes about half of the world's supply of Mo-99, but there has been no domestic (i.e., U.S.-based) production of this isotope since the late 1980s. The United States imports Mo-99 for domestic use from Australia, Canada, Europe, and South Africa. Mo-99 and Tc-99m cannot be stockpiled for use because of their short half-lives. Consequently, they must be routinely produced and delivered to medical imaging centers. Almost all Mo-99 for medical use is produced by irradiating highly enriched uranium (HEU) targets in research reactors, several of which are over 50 years old and are approaching the end of their operating lives. Unanticipated and extended shutdowns of some of these old reactors have resulted in severe Mo-99 supply shortages in the United States and other countries. Some of these shortages have disrupted the delivery of medical care. Molybdenum-99 for Medical Imaging examines the production and utilization of Mo-99 and associated medical isotopes, and provides recommendations for medical use.
Download or read book Improving the Scientific Basis for Managing DOE s Excess Nuclear Materials and Spent Nuclear Fuel written by National Research Council and published by National Academies Press. This book was released on 2003-06-09 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: The production of nuclear materials for the national defense was an intense, nationwide effort that began with the Manhattan Project and continued throughout the Cold War. Now many of these product materials, by-products, and precursors, such as irradiated nuclear fuels and targets, have been declared as excess by the Department of Energy (DOE). Most of this excess inventory has been, or will be, turned over to DOE's Office of Environmental Management (EM), which is responsible for cleaning up the former production sites. Recognizing the scientific and technical challenges facing EM, Congress in 1995 established the EM Science Program (EMSP) to develop and fund directed, long-term research that could substantially enhance the knowledge base available for new cleanup technologies and decision making. The EMSP has previously asked the National Academies' National Research Council for advice for developing research agendas in subsurface contamination, facility deactivation and decommissioning, high-level waste, and mixed and transuranic waste. For this study the committee was tasked to provide recommendations for a research agenda to improve the scientific basis for DOE's management of its high-cost, high-volume, or high-risk excess nuclear materials and spent nuclear fuels. To address its task, the committee focused its attention on DOE's excess plutonium-239, spent nuclear fuels, cesium-137 and strontium-90 capsules, depleted uranium, and higher actinide isotopes.
Download or read book Metal Oxides in Energy Technologies written by Yuping Wu and published by Elsevier. This book was released on 2018-10-05 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxides in Energy Technologies provides, for the first time, a look at the wide range of energy applications of metal oxides. Topics covered include metal oxides materials and their applications in batteries, supercapacitors, fuel cells, solar cells, supercapacitors, and much more. The book is written by an experienced author of over 240 papers in peer-reviewed journals who was also been recognized as one of Thomson Reuter’s “World’s Most Influential Scientific Minds in 2015. This book presents a unique work that is ideal for academic researchers and engineers. Presents an authoritative overview on metal oxides in energy technologies as written by an expert author who has published extensively in the area Offers up-to-date coverage of a large, rapidly growing and complex literature Focuses on applications, making it an ideal resource for those who want to apply this knowledge in industry
Download or read book Opportunities and Approaches for Supplying Molybdenum 99 and Associated Medical Isotopes to Global Markets written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2018-03-12 with total page 87 pages. Available in PDF, EPUB and Kindle. Book excerpt: Participants of the July 17-18, 2017, symposium titled Opportunities and Approaches for Supplying Molybdenum-99 and Associated Medical Isotopes to Global Markets examined current trends in molybdenum-99 production, prospects for new global supplies, and technical, economic, regulatory, and other considerations for supplying molybdenum-99 to global markets. This publication summarizes the presentations and discussions from the symposium.
