Download or read book Physical Properties of Polymer Support Fluids in Use and Their Measurement Techniques written by Carlos Lam and published by . This book was released on 2015 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper was concerned with the physical properties of polymeric excavation-support fluids during use and reuse in the field and the techniques for their measurement. Synthetic polymer fluids were used as replacements for conventional bentonite clay slurries for the construction of bored piles (drilled shafts) and diaphragm walls since the early 1990s. They are used, in part, because of their rheological properties, especially their shear-thinning behavior, but to date research has focused on clean fluids and little also has been reported on the effects of reuse under field conditions and on the suitability of viscosity measurement devices. To fill this knowledge gap, the properties of polymer fluids were measured on a construction site in London, UK, over the entire construction period of 52 days. It was found that the density of the fluid and hence other properties were highly dependent on the decisions made by the contractor and that a well-designed tank system could offer considerable benefits in terms of fluid maintenance. Regarding the monitoring of fluid viscosity, the Marsh funnel was, unsurprisingly, found to be unsuitable for detailed analyses; although it did provide some useful information about the overall fluid condition. However, with a direct-indicating viscometer, it was possible to characterize the shear-thinning properties of the fluids over a range of shear rates and stages of fluid use. From the test results, it was concluded that the effect of reuse was to increase in the overall fluid viscosity but at the same time to enhance the shear-thinning behavior.
Download or read book Determination of Residual Concentration of Active Polymer in a Polymeric Support Fluid written by Carlos Lam and published by . This book was released on 2014 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper is concerned with the properties of synthetic polymer fluids used for the temporary support of excavations, such as pile bores and diaphragm wall panels. These fluids can be used as alternatives to bentonite slurries and may influence the performance of the foundation elements formed under them. During the excavation process, polymers tend to be sorbed onto the soil and they may be degraded by the shearing in pumps, etc. It follows that a controlling parameter for these fluids is the residual concentration of active polymer in the fluid, and this paper considers test methods that may be used for its determination. Three different measuring principles, namely, total organic carbon, UV light absorption, and viscosity, were investigated for their suitability for site use. Their performance was compared in a series of polymer-clay sorption experiments--the clay sorbing the polymer, therefore reducing the residual concentration in solution. A method based on the measurement of viscosity of centrifuge supernates was found to have the best overall performance. A comparison with current assessment criteria based on Marsh funnel viscosity and density measurements confirmed the superiority of the proposed method for detecting polymer loss by sorption. Further evaluations showed that the proposed method is not limited to any specific combinations of polymers and soils. The proposed method will allow site engineers to have greater control over the properties of the fluids on site.
Download or read book Experimental Methods of Polymer Physics written by Aleksandr I︠A︡kovlevich Malkin and published by Prentice Hall. This book was released on 1983 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NBS Special Publication written by and published by . This book was released on 1968 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Publications written by United States. National Bureau of Standards and published by . This book was released on 1978 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Publications of the National Institute of Standards and Technology Catalog written by National Institute of Standards and Technology (U.S.) and published by . This book was released on 1986 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Publications of the National Bureau of Standards Catalog written by United States. National Bureau of Standards and published by . This book was released on 1986 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dynamics of Polymeric Liquids Volume 1 written by R. Byron Bird and published by Wiley-Interscience. This book was released on 1987-05-27 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: This revision of an introductory text examines Newtonian liquids and polymer fluid mechanics. It begins with a review of the main ideas of fluid dynamics as well as key points of Newtonian fluids.
Download or read book Principles of Polymer Processing written by Zehev Tadmor and published by John Wiley & Sons. This book was released on 2013-12-02 with total page 1004 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thoroughly revised edition of the classic text on polymer processing The Second Edition brings the classic text on polymer processing thoroughly up to date with the latest fundamental developments in polymer processing, while retaining the critically acclaimed approach of the First Edition. Readers are provided with the complete panorama of polymer processing, starting with fundamental concepts through the latest current industry practices and future directions. All the chapters have been revised and updated, and four new chapters have been added to introduce the latest developments. Readers familiar with the First Edition will discover a host of new material, including: * Blend and alloy microstructuring * Twin screw-based melting and chaotic mixing mechanisms * Reactive processing * Devolatilization--theory, mechanisms, and industrial practice * Compounding--theory and industrial practice * The increasingly important role of computational fluid mechanics * A systematic approach to machine configuration design The Second Edition expands on the unique approach that distinguishes it from comparative texts. Rather than focus on specific processing methods, the authors assert that polymers have a similar experience in any processing machine and that these experiences can be described by a set of elementary processing steps that prepare the polymer for any of the shaping methods. On the other hand, the authors do emphasize the unique features of particular polymer processing methods and machines, including the particular elementary step and shaping mechanisms and geometrical solutions. Replete with problem sets and a solutions manual for instructors, this textbook is recommended for undergraduate and graduate students in chemical engineering and polymer and materials engineering and science. It will also prove invaluable for industry professionals as a fundamental polymer processing analysis and synthesis reference.
Download or read book Rheology Essentials of Cosmetic and Food Emulsions written by Rüdiger Brummer and published by Springer Science & Business Media. This book was released on 2006-05-27 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cosmetic emulsions exist today in many forms for a wide variety of applications, including face and hand creams for normal, dry or oily skin, body milks and lotions, as well as sun-block products. Keeping track of them and their properties is not always easy despite informative product names or partial names (e.g. hand or face cream) that clearly indicate their use and properties. This practical manual provides a detailed overview that describes the key properties and explains how to measure them using modern techniques. Written by an expert in flows and flow properties, it focuses on the application of rheological (flow) measurements to cosmetic and food emulsions and the correlation of these results with findings from other tests. Beginning with a brief history of rheology and some fundamental principles, the manual describes in detail the use of modern viscometers and rheometers, including concise explanations of the different available instruments. But the focus remains on practical everyday lab procedures: how to characterize cosmetic and food emulsions with different rheological tests such as temperature, time, stress and strain, both static and dynamic. Also the critical topic of how the results correlate with other important product characteristics, for instance, skin sensation, pumping performance, stability etc. is carefully explored. Many pictures, illustrations, graphs and tables help readers new to the measurement of cosmetic emulsions in their daily work as well as to the more experienced who seek additional special tips and tricks.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book OAR written by and published by . This book was released on 1967 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Extensional Flow Properties of Polymer Melts Using Converging Flow Methods written by National Physical Laboratory (Great Britain). Centre for Materials Measurement and Technology and published by . This book was released on 1999 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Rubber Product Failure written by Roger P. Brown and published by iSmithers Rapra Publishing. This book was released on 2002 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rubber components are used in many demanding applications, from tyres and seals to gloves and medical devices, and failure can be catastrophic. This review of Rubber Product Failure outlines and illustrates the common causes of failure, while addressing ways of avoiding it. There has been increasing pressure to improve performance so that rubbers can be used at higher temperatures and in harsher environments. For example, the under-the-bonnet temperature has increased in some vehicles and new medical devices require longer lifetimes in potentially degrading biological fluids. The expectations of tyre performance in particular are increasing, and retreads have been in the spotlight for failures. The definition of failure depends on the application. For example, a racing car engine seal that lasts for one race may be acceptable, but in a normal car a life span of 10 years is more reasonable. If appearance is critical as in surface coatings and paints, then discolouration is failure, whilst in seals leakage is not acceptable. Each rubber product must be fit for the use specified by the consumer. Failure analysis is critical to product improvement. the cause of the problem can be much harder to find. It can range from a design fault to poor material selection, to processing problems, to manufacturing errors such as poor dimensional tolerances, to poor installation, product abuse and unexpected service conditions. The rubber technologist must become a detective, gathering evidence, understanding the material type and using deductive reasoning. Testing and analysis of failed materials and components add to the information available for failure analysis. For example, stored aged tyres appeared superficially to be alright for use, but on drum testing small cracks grew more quickly than in new tyres leading to rapid failure in service. Quality control procedures such as product inspection, testing and material quality checks can help to reach 100 percent reliability. In critical applications such as electricians' gloves for high voltage working, gloves are inspected before each use, while engine seals may be routinely replaced before the expected lifetime to avoid problems. in the literature is not high. However, several reviews have been written on specific products and references can be found at the end of this review. Around 400 abstracts from papers in the Polymer Library are included with an index. Subjects covered include tyre wear and failure, seals, engine components, rubber bonding failure, rubber failure due to chloramine in water, tank treads, gloves and condoms, medical devices and EPDM roofing membranes.
Download or read book American Laboratory written by and published by . This book was released on 2003 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book TID written by and published by . This book was released on 1959 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Research Abstracts written by and published by . This book was released on 1989 with total page 992 pages. Available in PDF, EPUB and Kindle. Book excerpt:
