Download or read book Physical Methods in Chemistry and Nano Science Volume 8 written by Andrew Barron and published by Midas Green Innovation, Limited. This book was released on 2020-05-31 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Series intended as a survey of research techniques used in modern chemistry, materials science, and nanoscience. The topics are grouped into volumes, not be method per se, but with regard to the type of information that can be obtained. Thus, the Volumes are ordered as follows: 1) Elemental composition; 2) Physical and thermal analysis; 3) Chromatography; 4) Chemical speciation; 5) Molecular and solid state structure; 6) Surface morphology and structure at the nanoscale; 7) Device performance; 8) Applications of analytical methods.
Download or read book Introduction to Nanoscience written by Stuart Lindsay and published by OUP Oxford. This book was released on 2009-10-22 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoscience is not physics, chemistry, engineering or biology. It is all of them, and it is time for a text that integrates the disciplines. This is such a text, aimed at advanced undergraduates and beginning graduate students in the sciences. The consequences of smallness and quantum behaviour are well known and described Richard Feynman's visionary essay 'There's Plenty of Room at the Bottom' (which is reproduced in this book). Another, critical, but thus far neglected, aspect of nanoscience is the complexity of nanostructures. Hundreds, thousands or hundreds of thousands of atoms make up systems that are complex enough to show what is fashionably called 'emergent behaviour'. Quite new phenomena arise from rare configurations of the system. Examples are the Kramer's theory of reactions (Chapter 3), the Marcus theory of electron transfer (Chapter 8), and enzyme catalysis, molecular motors, and fluctuations in gene expression and splicing, all covered in the final Chapter on Nanobiology. The book is divided into three parts. Part I (The Basics) is a self-contained introduction to quantum mechanics, statistical mechanics and chemical kinetics, calling on no more than basic college calculus. A conceptual approach and an array of examples and conceptual problems will allow even those without the mathematical tools to grasp much of what is important. Part II (The Tools) covers microscopy, single molecule manipulation and measurement, nanofabrication and self-assembly. Part III (Applications) covers electrons in nanostructures, molecular electronics, nano-materials and nanobiology. Each chapter starts with a survey of the required basics, but ends by making contact with current research literature.
Download or read book Many Body Methods in Chemistry and Physics written by Isaiah Shavitt and published by Cambridge University Press. This book was released on 2009-08-06 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the mathematical and diagrammatic techniques employed in the popular many-body methods to determine molecular structure, properties and interactions.
Download or read book Physical Methods in Chemistry and Nano Science Volume 1 written by Andrew Barron and published by Midas Green Innovations, Limited. This book was released on 2020-05-30 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Series intended as a survey of research techniques used in modern chemistry, materials science, and nanoscience. The topics are grouped into volumes, not be method per se, but with regard to the type of information that can be obtained. Thus, the Volumes are ordered as follows: 1) Elemental composition; 2) Physical and thermal analysis; 3) Chromatography; 4) Chemical speciation; 5) Molecular and solid state structure; 6) Surface morphology and structure at the nanoscale; 7) Device performance; 8) Applications of analytical methods.
Download or read book Introduction to Nanoscience and Nanotechnology written by Gabor L. Hornyak and published by CRC Press. This book was released on 2008-12-22 with total page 1791 pages. Available in PDF, EPUB and Kindle. Book excerpt: The maturation of nanotechnology has revealed it to be a unique and distinct discipline rather than a specialization within a larger field. Its textbook cannot afford to be a chemistry, physics, or engineering text focused on nano. It must be an integrated, multidisciplinary, and specifically nano textbook. The archetype of the modern nano textbook
Download or read book Introduction to Nanoscience written by Gabor L. Hornyak and published by CRC Press. This book was released on 2008-05-15 with total page 852 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tomorrow's nanoscientist will have a truly interdisciplinary and nano-centric education, rather than, for example, a degree in chemistry with a specialization in nanoscience. For this to happen, the field needs a truly focused and dedicated textbook. This full-color masterwork is such a textbook. It introduces the nanoscale along with the societal
Download or read book Electrochemistry written by The Open The Open Courses Library and published by . This book was released on 2019-12-02 with total page 41 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrochemistry Physical Methods in Chemistry and Nano Science A chemical reaction that involves a change in the charge of a chemical species is called an electrochemical reaction. As the name suggests, these reactions involve electron transfer between chemicals. Many of these reactions occur spontaneously when the various chemicals come in contact with one another. In order to force a nonspontaneous electrochemical reaction to occur, a driving force needs to be provided. This is because every chemical species has a relative reduction potential. These values provide information on the ability of the chemical to take extra electrons. Chapter Outline: Cyclic Voltammetry Measurements The Application of Cyclic Voltammetry in Proton Exchange Membrane Fuel Cells Chronocoulometry: A Technique for Electroplating The Open Courses Library introduces you to the best Open Source Courses.
Download or read book Chemical Nanoscience and Nanotechnology written by Francisco Torrens and published by CRC Press. This book was released on 2019-08-05 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new volume presents a wealth of practical experience and research on new methodologies and important applications in chemical nanotechnology. It also includes small-scale nanotechnology-related projects that have potential applications in several disciplines of chemistry and nanotechnology. In this book, contributions range from new methods to novel applications of existing methods to gain understanding of the material and/or structural behavior of new and advanced systems. Topics cover computational methods in chemical engineering and chemoinformatics, studies of some of physico-chemical properties of several important nanoalloy clusters, the use of 3D reconstruction of nanofibrous membranes, nanotechnology research for green engineering and sustainability, nanofiltration and carbon nanotubes applications in water treatment, and much more.
Download or read book Nanoscience written by Neerish Revaprasadu and published by Royal Society of Chemistry. This book was released on 2018-11-04 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of nanoscience continues to grow at an impressive rate and, with such a vast landscape of material, careful distillation of the most important discoveries will help researchers find the key information they require. Nanoscience Volume 5 provides a critical and comprehensive assessment of the most recent research and opinion from across the globe. Coverage includes diverse topics such as controlling chemistry of gold nanoparticles to dictate their cellular interactions, uptake and toxicity, use of metal complexes to prepare 2-D materials and nanoscale porphyrin superstructures. Anyone practising in any nano-allied field, or wishing to enter the nano-world will benefit from this resource, presenting the current thought and applications of nanoscience.
Download or read book Nanoscience Volume 1 written by Paul O'Brien and published by Royal Society of Chemistry. This book was released on 2012 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of nanoscience continues to grow at an impressive rate, with over 10,000 new articles a year contributing to a literature of more than half a million citations. Such a vast landscape of material requires careful searching to discover the most important discoveries. The newest edition to the Specialist Periodical Reports, presents a digest of the last twelve months of literature across the field. The volume editor, Professor Paul O'Brien (University of Manchester, UK) has drawn on some of the most active researchers to present critical and comprehensive reviews of the hottest topics in the field. Chapters include "Nanomaterials for solar energy", "Magnetic hyperthermia" and "Graphene and graphene-based nanocomposites". There is also a special chapter on "Nanoscience in India". Anyone practicing in any nano-allied field, or wishing to enter the nano-world will benefit from the comprehensive resource, which will be published annually.
Download or read book Handbook of Nanomaterials Volume 1 written by Muhammad Imran Malik and published by Elsevier. This book was released on 2024-01-18 with total page 802 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Nanomaterials: Electronics, Information Technology, Energy, Transportation, and Consumer Products offers a comprehensive resource that introduces the role of nanotechnology and nanomaterials in a broad range of areas, covering fundamentals, methods, and applications.In this volume, the initial chapters introduce the core concepts of nanotechnology, and synthesis methods and characterization techniques for nanomaterials. This is followed by dedicated sections focusing on key application areas across electronics, information technology, energy, transportation, and consumer products. In each chapter, detailed but concise information is provided on a specific application, covering methods and latest advances.This book is of interest to researchers and advanced students approaching nanotechnology from a range of disciplines, including materials science and engineering, chemistry, chemical engineering, electronics, energy, biomedicine, environmental science, food science, and agriculture, as well as scientists, engineers, and R&D professionals with an interest in the use of nanomaterials across a range of industries. - Introduces the reader to key applications of nanomaterials - Provides broad, systematic, concise coverage, supporting readers from a range of disciplines - Covers applications across electronics, information technology, energy, transportation, and consumer products
Download or read book Comprehensive Nanoscience and Technology written by and published by Academic Press. This book was released on 2010-10-29 with total page 2785 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the Introduction: Nanotechnology and its underpinning sciences are progressing with unprecedented rapidity. With technical advances in a variety of nanoscale fabrication and manipulation technologies, the whole topical area is maturing into a vibrant field that is generating new scientific research and a burgeoning range of commercial applications, with an annual market already at the trillion dollar threshold. The means of fabricating and controlling matter on the nanoscale afford striking and unprecedented opportunities to exploit a variety of exotic phenomena such as quantum, nanophotonic and nanoelectromechanical effects. Moreover, researchers are elucidating new perspectives on the electronic and optical properties of matter because of the way that nanoscale materials bridge the disparate theories describing molecules and bulk matter. Surface phenomena also gain a greatly increased significance; even the well-known link between chemical reactivity and surface-to-volume ratio becomes a major determinant of physical properties, when it operates over nanoscale dimensions. Against this background, this comprehensive work is designed to address the need for a dynamic, authoritative and readily accessible source of information, capturing the full breadth of the subject. Its six volumes, covering a broad spectrum of disciplines including material sciences, chemistry, physics and life sciences, have been written and edited by an outstanding team of international experts. Addressing an extensive, cross-disciplinary audience, each chapter aims to cover key developments in a scholarly, readable and critical style, providing an indispensible first point of entry to the literature for scientists and technologists from interdisciplinary fields. The work focuses on the major classes of nanomaterials in terms of their synthesis, structure and applications, reviewing nanomaterials and their respective technologies in well-structured and comprehensive articles with extensive cross-references. It has been a constant surprise and delight to have found, amongst the rapidly escalating number who work in nanoscience and technology, so many highly esteemed authors willing to contribute. Sharing our anticipation of a major addition to the literature, they have also captured the excitement of the field itself in each carefully crafted chapter. Along with our painstaking and meticulous volume editors, full credit for the success of this enterprise must go to these individuals, together with our thanks for (largely) adhering to the given deadlines. Lastly, we record our sincere thanks and appreciation for the skills and professionalism of the numerous Elsevier staff who have been involved in this project, notably Fiona Geraghty, Megan Palmer and Greg Harris, and especially Donna De Weerd-Wilson who has steered it through from its inception. We have greatly enjoyed working with them all, as we have with each other.
Download or read book Computational Nanoscience written by Kálmán Varga and published by Cambridge University Press. This book was released on 2011-04-14 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer simulation is an indispensable research tool in modeling, understanding and predicting nanoscale phenomena. However, the advanced computer codes used by researchers are too complicated for graduate students wanting to understand computer simulations of physical systems. This book gives students the tools to develop their own codes. Describing advanced algorithms, the book is ideal for students in computational physics, quantum mechanics, atomic and molecular physics, and condensed matter theory. It contains a wide variety of practical examples of varying complexity to help readers at all levels of experience. An algorithm library in Fortran 90, available online at www.cambridge.org/9781107001701, implements the advanced computational approaches described in the text to solve physical problems.
Download or read book Nano Science and Technology written by Ping Sheng and published by CRC Press. This book was released on 2003-03-06 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoscience and technology is a rapidly developing area of research in physics, chemistry, and materials. This volume comsists of papers presented at the Advanced Study Institute in Hong Kong that explore developments in novel structures in phenomena of nanostructured materials. The topics include: two-dimensional nanoclusters on met
Download or read book Textbook of Nanoscience and Nanotechnology written by B.S. Murty and published by Springer Science & Business Media. This book was released on 2013-12-06 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is meant to serve as a textbook for beginners in the field of nanoscience and nanotechnology. It can also be used as additional reading in this multifaceted area. It covers the entire spectrum of nanoscience and technology: introduction, terminology, historical perspectives of this domain of science, unique and widely differing properties, advances in the various synthesis, consolidation and characterization techniques, applications of nanoscience and technology and emerging materials and technologies.
Download or read book Nanoscience And Nanotechnology In Engineering written by Vijay K Varadan and published by World Scientific Publishing Company. This book was released on 2010-08-06 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: The usage of nanoscience and nanotechnology in engineering directly links academic research in nanoscience and nanotechnology to industries and daily life. As a result, numerous nanomaterials, nanodevices and nanosystems for various engineering purposes have been developed and used for human betterment. This book, which consists of eight self-contained chapters, provides the essential theoretical knowledge and important experimental techniques required for the research and development on nanoscience and nanotechnology in engineering, and deals with the five key topics in this area — Nanoscience and Nanotechnology in Engineering is based on the many lectures and courses presented around the world by its authors.
Download or read book Comprehensive Nanoscience and Nanotechnology written by and published by Academic Press. This book was released on 2019-01-02 with total page 1881 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Nanoscience and Technology, Second Edition, Five Volume Set allows researchers to navigate a very diverse, interdisciplinary and rapidly-changing field with up-to-date, comprehensive and authoritative coverage of every aspect of modern nanoscience and nanotechnology. Presents new chapters on the latest developments in the field Covers topics not discussed to this degree of detail in other works, such as biological devices and applications of nanotechnology Compiled and written by top international authorities in the field
