Download or read book Physical Methods for Materials Characterisation written by Peter E. J. Flewitt and published by CRC Press. This book was released on 2017-12-06 with total page 725 pages. Available in PDF, EPUB and Kindle. Book excerpt: This completely revised and expanded new edition covers the full range of techniques now available for the investigation of materials structure and accurate quantitative determination of microstructural features within materials. It continues to provide the best introductory resource for understanding the interrelationship between microstructure and physical, mechanical, and chemical properties, as well as selection and application of techniques for both basic and applied studies. In particular, changes have been made to reflect developments in analysis of nanoscale and biological materials.
Download or read book An Introduction to Beam Physics written by Martin Berz and published by CRC Press. This book was released on 2014-12-03 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of beam physics touches many areas of physics, engineering, and the sciences. In general terms, beams describe ensembles of particles with initial conditions similar enough to be treated together as a group so that the motion is a weakly nonlinear perturbation of a chosen reference particle. Particle beams are used in a variety of areas, ranging from electron microscopes, particle spectrometers, medical radiation facilities, powerful light sources, and astrophysics to large synchrotrons and storage rings such as the LHC at CERN. An Introduction to Beam Physics is based on lectures given at Michigan State University’s Department of Physics and Astronomy, the online VUBeam program, the U.S. Particle Accelerator School, the CERN Academic Training Programme, and various other venues. It is accessible to beginning graduate and upper-division undergraduate students in physics, mathematics, and engineering. The book begins with a historical overview of methods for generating and accelerating beams, highlighting important advances through the eyes of their developers using their original drawings. The book then presents concepts of linear beam optics, transfer matrices, the general equations of motion, and the main techniques used for single- and multi-pass systems. Some advanced nonlinear topics, including the computation of aberrations and a study of resonances, round out the presentation.
Download or read book Physical Methods for Materials Characterisation written by P. E. J. Flewitt and published by Inst of Physics Pub Incorporated. This book was released on 1994 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: This important textbook provides a comprehensive description of the large range of techniques used to characterize the microstructure of materials. The book carefully explains the interactions between various radiations with materials, and shows how these interactions form the basis of the specific evaluation and measurement methods. Sections of the text deal with basic science and technology, such as diffraction laws, vacuum techniques and radiation sources. The characterization techniques are divided on the basis of the interrogating radiation source, and cover optical and x-ray techniques, electron microscopy and spectroscopy, ion and particle microscopy and spectroscopy. Computer applications in instrument control, data acquisition and analysis are discussed, together with coverage of simulation techniques.
Download or read book Materials Characterization Using Nondestructive Evaluation NDE Methods written by Gerhard Huebschen and published by Woodhead Publishing. This book was released on 2016-03-23 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials Characterization Using Nondestructive Evaluation (NDE) Methods discusses NDT methods and how they are highly desirable for both long-term monitoring and short-term assessment of materials, providing crucial early warning that the fatigue life of a material has elapsed, thus helping to prevent service failures. Materials Characterization Using Nondestructive Evaluation (NDE) Methods gives an overview of established and new NDT techniques for the characterization of materials, with a focus on materials used in the automotive, aerospace, power plants, and infrastructure construction industries. Each chapter focuses on a different NDT technique and indicates the potential of the method by selected examples of applications. Methods covered include scanning and transmission electron microscopy, X-ray microtomography and diffraction, ultrasonic, electromagnetic, microwave, and hybrid techniques. The authors review both the determination of microstructure properties, including phase content and grain size, and the determination of mechanical properties, such as hardness, toughness, yield strength, texture, and residual stress. Gives an overview of established and new NDT techniques, including scanning and transmission electron microscopy, X-ray microtomography and diffraction, ultrasonic, electromagnetic, microwave, and hybrid techniques Reviews the determination of microstructural and mechanical properties Focuses on materials used in the automotive, aerospace, power plants, and infrastructure construction industries Serves as a highly desirable resource for both long-term monitoring and short-term assessment of materials
Download or read book Materials Characterization Techniques written by Sam Zhang and published by CRC Press. This book was released on 2008-12-22 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Experts must be able to analyze and distinguish all materials, or combinations of materials, in use today-whether they be metals, ceramics, polymers, semiconductors, or composites. To understand a material's structure, how that structure determines its properties, and how that material will subsequently work in technological applications, researche
Download or read book Advanced Techniques for Materials Characterization written by A.K. Tyagi and published by Trans Tech Publications Ltd. This book was released on 2009-01-02 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters BCI (WoS). Nowadays, an impressively large number of powerful characterization techniques is being used by physicists, chemists, biologists and engineers in order to solve analytical research problems; especially those related to the investigation of the properties of new materials for advanced applications. Although there are a few available books which deal with such experimental techniques, they are either too exhaustive and cover very few techniques or are too elementary to provide a solid basis for learning to use the characterization technique. Moreover, such books usually over-emphasize the textbook approach: being full of theoretical concepts and mathematical derivations, and omitting the practical instruction required in order to permit newcomers to use the techniques.
Download or read book Handbook of Materials Characterization written by Surender Kumar Sharma and published by Springer. This book was released on 2018-09-18 with total page 613 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the widely used experimental techniques available for the structural, morphological, and spectroscopic characterization of materials. Recent developments in a wide range of experimental techniques and their application to the quantification of materials properties are an essential side of this book. Moreover, it provides concise but thorough coverage of the practical and theoretical aspects of the analytical techniques used to characterize a wide variety of functional nanomaterials. The book provides an overview of widely used characterization techniques for a broad audience: from beginners and graduate students, to advanced specialists in both academia and industry.
Download or read book Catalyst Characterization written by Boris Imelik and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: to the Fundamental and Applied Catalysis Series Catalysis is important academically and industrially. It plays an essential role in the manufacture of a wide range of products, from gasoline and plastics to fertilizers and herbicides, which would otherwise be unobtainable or prohibitive ly expensive. There are few chemical-or oil-based material items in modern society that do not depend in some way on a catalytic stage in their manufacture. Apart from manufacturing processes, catalysis is finding other important and over-increasing uses; for example, successful applications of catalysis in the control ofpollution and its use in environmental control are certain to in crease in the future. The commercial import an ce of catalysis and the diverse intellectual challenges of catalytic phenomena have stimulated study by a broad spectrum of scientists including chemists, physicists, chemical engineers, and material scientists. Increasing research activity over the years has brought deeper levels of understanding, and these have been associated with a continually growing amount of published material. As recentlyas sixty years ago, Rideal and Taylor could still treat the subject comprehensively in a single volume, but by the 19 50s Emmett required six volumes, and no conventional multivolume text could now cover the whole of catalysis in any depth.
Download or read book Principles of Materials Characterization and Metrology written by Kannan M. Krishnan and published by Oxford University Press. This book was released on 2021-05-07 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: Characterization enables a microscopic understanding of the fundamental properties of materials (Science) to predict their macroscopic behaviour (Engineering). With this focus, Principles of Materials Characterization and Metrology presents a comprehensive discussion of the principles of materials characterization and metrology. Characterization techniques are introduced through elementary concepts of bonding, electronic structure of molecules and solids, and the arrangement of atoms in crystals. Then, the range of electrons, photons, ions, neutrons and scanning probes, used in characterization, including their generation and related beam-solid interactions that determine or limit their use, is presented. This is followed by ion-scattering methods, optics, optical diffraction, microscopy, and ellipsometry. Generalization of Fraunhofer diffraction to scattering by a three-dimensional arrangement of atoms in crystals leads to X-ray, electron, and neutron diffraction methods, both from surfaces and the bulk. Discussion of transmission and analytical electron microscopy, including recent developments, is followed by chapters on scanning electron microscopy and scanning probe microscopies. The book concludes with elaborate tables to provide a convenient and easily accessible way of summarizing the key points, features, and inter-relatedness of the different spectroscopy, diffraction, and imaging techniques presented throughout. Principles of Materials Characterization and Metrology uniquely combines a discussion of the physical principles and practical application of these characterization techniques to explain and illustrate the fundamental properties of a wide range of materials in a tool-based approach. Based on forty years of teaching and research, this book incorporates worked examples, to test the reader's knowledge with extensive questions and exercises.
Download or read book Materials Characterization written by Ramiro Pérez Campos and published by Springer. This book was released on 2015-04-27 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers novel research results for process and techniques of materials characterization for a wide range of materials. The authors provide a comprehensive overview of the aspects of structural and chemical characterization of these materials. The articles contained in this book covers state of the art and experimental techniques commonly used in modern materials characterization. The book includes theoretical models and numerous illustrations of structural and chemical characterization properties.
Download or read book Chemical Analysis and Material Characterization by Spectrophotometry written by Bhim Prasad Kaflé and published by Elsevier. This book was released on 2019-11-29 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Analysis and Material Characterization by Spectrophotometry integrates and presents the latest known information and examples from the most up-to-date literature on the use of this method for chemical analysis or materials characterization. Accessible to various levels of expertise, everyone from students, to practicing analytical and industrial chemists, the book covers both the fundamentals of spectrophotometry and instrumental procedures for quantitative analysis with spectrophotometric techniques. It contains a wealth of examples and focuses on the latest research, such as the investigation of optical properties of nanomaterials and thin solid films. Covers the basic analytical theory that is essential for understanding spectrophotometry Emphasizes minor/trace chemical component analysis Includes the spectrophotometric analysis of nanomaterials and thin solid films Thoroughly describes methods and uses easy-to-follow, practical examples and experiments
Download or read book A Guide to Materials Characterization and Chemical Analysis written by John P. Sibilia and published by John Wiley & Sons. This book was released on 1996-12-17 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written both for the novice and for the experienced scientist, this miniature encyclopedia concisely describes over one hundred materials methodologies, including evaluation, chemical analysis, and physical testing techniques. Each technique is presented in terms of its use, sample requirements, and the engineering principles behind its methodology. Real life industrial and academic applications are also described to give the reader an understanding of the significance and utilization of technique. There is also a discussion of the limitations of each technique.
Download or read book Characterisation Methods in Solid State and Materials Science written by Kelly Morrison and published by . This book was released on 2019 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive overview of the various characterisation techniques involved in solid state research. The generalised approach offers a deeper understanding of the benefits, drawbacks and overlap within different characterisation techniques. In particular, the book examines techniques within diffraction, microscopy and spectroscopy and discusses thermal, electric and magnetic characterisation.
Download or read book Semiconductor Material and Device Characterization written by Dieter K. Schroder and published by John Wiley & Sons. This book was released on 2015-06-29 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Third Edition updates a landmark text with the latest findings The Third Edition of the internationally lauded Semiconductor Material and Device Characterization brings the text fully up-to-date with the latest developments in the field and includes new pedagogical tools to assist readers. Not only does the Third Edition set forth all the latest measurement techniques, but it also examines new interpretations and new applications of existing techniques. Semiconductor Material and Device Characterization remains the sole text dedicated to characterization techniques for measuring semiconductor materials and devices. Coverage includes the full range of electrical and optical characterization methods, including the more specialized chemical and physical techniques. Readers familiar with the previous two editions will discover a thoroughly revised and updated Third Edition, including: Updated and revised figures and examples reflecting the most current data and information 260 new references offering access to the latest research and discussions in specialized topics New problems and review questions at the end of each chapter to test readers' understanding of the material In addition, readers will find fully updated and revised sections in each chapter. Plus, two new chapters have been added: Charge-Based and Probe Characterization introduces charge-based measurement and Kelvin probes. This chapter also examines probe-based measurements, including scanning capacitance, scanning Kelvin force, scanning spreading resistance, and ballistic electron emission microscopy. Reliability and Failure Analysis examines failure times and distribution functions, and discusses electromigration, hot carriers, gate oxide integrity, negative bias temperature instability, stress-induced leakage current, and electrostatic discharge. Written by an internationally recognized authority in the field, Semiconductor Material and Device Characterization remains essential reading for graduate students as well as for professionals working in the field of semiconductor devices and materials. An Instructor's Manual presenting detailed solutions to all the problems in the book is available from the Wiley editorial department.
Download or read book Materials Characterization written by Yang Leng and published by John Wiley & Sons. This book was released on 2009-03-04 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers state-of-the-art techniques commonly used in modern materials characterization. Two important aspects of characterization, materials structures and chemical analysis, are included. Widely used techniques, such as metallography (light microscopy), X-ray diffraction, transmission and scanning electron microscopy, are described. In addition, the book introduces advanced techniques, including scanning probe microscopy. The second half of the book accordingly presents techniques such as X-ray energy dispersive spectroscopy (commonly equipped in the scanning electron microscope), fluorescence X-ray spectroscopy, and popular surface analysis techniques (XPS and SIMS). Finally, vibrational spectroscopy (FTIR and Raman) and thermal analysis are also covered.
Download or read book Optical Techniques for Solid State Materials Characterization written by Rohit P. Prasankumar and published by CRC Press. This book was released on 2020-06-30 with total page 748 pages. Available in PDF, EPUB and Kindle. Book excerpt: With chapters written by pioneering experts in various optical techniques, this comprehensive reference provides detailed descriptions of basic and advanced optical techniques commonly used to study materials, from the simple to the complex. It explains how to use the techniques to acquire, analyze, and interpret data for gaining insight into ma
Download or read book Nanocharacterization Techniques written by Osvaldo de Oliveira Jr and published by William Andrew. This book was released on 2017-03-18 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanocharacterization Techniques covers the main characterization techniques used in nanomaterials and nanostructures. The chapters focus on the fundamental aspects of characterization techniques and their distinctive approaches. Significant advances that have taken place over recent years in refining techniques are covered, and the mathematical foundations needed to use the techniques are also explained in detail. This book is an important reference for materials scientists and engineers looking for a through analysis of nanocharacterization techniques in order to establish which is best for their needs. Includes a detailed analysis of different nanocharacterization techniques, allowing readers to explore which one is best for their particular needs Provides examples of how each characterization technique has been used, giving readers a greater understanding of how each technique can be profitably used Covers the mathematical background needed to utilize each of these techniques to their best effect, meaning that readers can gain a full understanding of the theoretical principles behind each technique covered Serves as an important, go-to reference for materials scientists and engineers