Download or read book Physical Metallurgy of Tungsten and Tungsten Alloys written by Westinghouse Electric Corporation. Westinghouse Lamp Division and published by . This book was released on 1960 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Physical Metallurgy of Cobalt base Superalloys written by H J Wagner and published by . This book was released on 1962 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: A detailed picture is presented of the physical and chemical phenomena that affect the behavior of cobalt-base superalloys. Solid-solution strengthening is obtained from the high-melting metallic elements molybdenum, tungsten, tantalum, and columbium. These elements also participate in precipitation reactions involving their carbides. Precipitation of intermetallic compounds such as Ni3Ti is an important process in cobalt alloys containing appreciable amounts of nickel and titanium. The relationships among microstructure, heat treatment, and mechanical properties of the important commercial alloys are considered, and whenever possible, explained on the basis of the physical and chem cal processes that occur. (Author).
Download or read book NASA Technical Note written by and published by . This book was released on 1966 with total page 880 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Physical Metallurgy of Nickel base Superalloys written by C. H. Lund and published by . This book was released on 1961 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structure and Properties of Tungsten base Powder Metallurgy Composites written by Thomas P. Herbell and published by . This book was released on 1966 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Discussion of the Physical Metallurgy of the 18 Per Cent Nickel Maraging Steels written by Albert M. Hall and published by . This book was released on 1963 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt: Various aspects of the physical metallurgy of the 18 % nickel maraging steels are discussed in this report in the light of the knowledge which has thus far been accumulated on these steels. The 18 % nickel type of maraging steel was singled out for discussion because of its especially attractive combination of strength and fracture toughness, the comparative simplicity with which it can be hardened, and the relative ease with which it can be formed and joined. The highnickel maraging steels are considered to be outstanding members of a loose-knit family of agehardenable or precipitation-hardenable martensitic steels. Some comparisons and analogies are drawn among various members of this family with particular reference to the 18% nickel steels. (Author).
Download or read book The Welding and Brazing of Alloy 718 written by Robert Melvin Evans and published by . This book was released on 1964 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because of a special interest in Alloy 718, the Defense Metals Information Center has summarized information on the welding and brazing of the alloy. Two principal resons for the interest in this alloy are its good formability and its good weldability, expecially under restraint. The greater portion of the fusion welding of Alloy 718 has been done by the gas tungsten-arc (TIG) process. A discussion of welding atmosphere, filler metals, heat treatment of welds, welding under restraint, and weld toughness is presented in the section on fusion welding. Information is also presented on resistance welding and electron-beam welding of Alloy 718. The final section of this report deals with the brazing of Alloy 718.
Download or read book Government wide Index to Federal Research Development Reports written by and published by . This book was released on 1965 with total page 886 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Explosive Forming of Metals written by D. E. Strohecker and published by . This book was released on 1964 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Effects of Heat treating and Testing Environments on the Properties of Refractory Metals written by F. F. Schmidt and published by . This book was released on 1964 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: Studies on the effects of heat-treating and testing environments for the refractory metals have been limited primarily to the unalloyed metals and a few alloys of columbium and molybdenum. Most of this work has relied on compositional changes as a means of assesing the effects of various environments on these materials. It has been shown that all of these materials are subject to contamination or purification in various test environments. The residual gases H2, CO(or N2), and H20, constitute the major sources of contamination when testing columbium and tantalum materials in vacua. Under the same conditions, molybdenum and molybdenum alloys containing carbon and reactive-metal additions are subject to serious decarburization. Nonreactive gaseous atmospheres also cause serious changes in material chemistry, since small quantities of noxious gases are contained in the atmosphere. Several promising methods of circumventing material chemistry changes during various longtime, high-temperature exposures are being used and/or evaluated. (Author).
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1965 with total page 1188 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Strain Aging of Refractory Metals written by A. G. Imgram and published by . This book was released on 1960 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1969-11 with total page 1168 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book New Developments in the Welding of Metals written by P. J. Rieppel and published by . This book was released on 1960 with total page 62 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Technical Abstract Bulletin written by and published by . This book was released on with total page 908 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aerospace Structural Metals Handbook written by and published by . This book was released on 1989 with total page 828 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Effects of Alloying Elements in Titanium written by D. J. Maykuth and published by . This book was released on 1960 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt:
