Download or read book Physical Metallurgy of Refractory Metals and Alloys written by E. M. Savitskii and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: The principal reasons which induced the authors to write this book and the features of the book are set forth in the preface to the Russian edition. That section of the science of metals which in Russian is called "metallovedenie" or the "physical chemistry of metals" is generally referred to in scientific and technical literature published in the English language by the term "physical metallurgy." These concepts are much broader than the term" metallography," used in the scientific and technical literature of various countries, and applied solely to research on the interrelationships of the structure and proper ties of metals and alloys. Each science must have its own subject and its own method of research. Certainly, all specialists will agree that metals and alloys, including their solid solutions, mechanical mix tures, and metallic compounds, form the subject of "physical metallurgy" or "physical chemis try of metals." The aim of this science. is to produce a theory and to elucidate the experimental relationships which ought finally to make it possible to calculate quantitatively alloys Of given properties for any working conditions and parameters.
Download or read book Physical Metallurgy written by Vadim M. Schastlivtsev and published by Walter de Gruyter GmbH & Co KG. This book was released on 2022-02-07 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: This compact overview on physical metallurgy provides a detailed coverage of phase equilibria and phase transformations in metals and alloys. It presents the broad range of topics from processes of crystallization and diffusion mechanisms to plastic deformations, recrystallization and phase transformations. It presents the microstructures in various alloys, especially in iron alloys and steels. As an introductory work it is valuable to Material Scientists, Students and Engineers.
Download or read book Modern Physical Metallurgy written by R. E. Smallman and published by Elsevier. This book was released on 2013-10-22 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Physical Metallurgy, Fourth Edition explains the fundamental principles of physical metallurgy and their application, allowing its readers to understand the many important technological phenomena of the field. The book covers topics such as the molecular properties of metals; the different physical methods of metals and alloys; and the structure of alloys. Also covered are topics such as the deformation of metals and alloys; phase transformations; and related processes such as creep, fatigue, fracture, oxidation, and corrosion. The text is recommended for metallurgists, chemists, and engineers who would like to know more about the principles behind metallurgy and its application in different fields.
Download or read book Physical Metallurgy written by Gregory N. Haidemenopoulos and published by CRC Press. This book was released on 2018-02-07 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physical metallurgy is one of the main fields of metallurgical science dealing with the development of the microstructure of metals in order to achieve desirable properties required in technological applications. Physical Metallurgy: Principles and Design focuses on the processing–structure–properties triangle as it applies to metals and alloys. It introduces the fundamental principles of physical metallurgy and the design methodologies for alloys and processing. The first part of the book discusses the structure and change of structure through phase transformations. The latter part of the books deals with plastic deformation, strengthening mechanisms, and mechanical properties as they relate to structure. The book also includes a chapter on physical metallurgy of steels and concludes by discussing the computational tools, involving computational thermodynamics and kinetics, to perform alloy and process design.
Download or read book Aluminum written by John E. Hatch and published by ASM International. This book was released on 1984-01-01 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive information for the American aluminium industry Collective effort of 53 recognized experts on aluminium and aluminium alloys Joint venture by world renowned authorities-the Aluminium Association Inc. and American Society for Metals. The completely updated source of information on aluminium industry as a whole rather than its individual contributors. this book is an opportunity to gain from The knowledge of the experts working for prestigious companies such as Alcoa, Reynolds Metals Co., Alcan International Ltd., Kaiser Aluminium & Chemical Corp., Martin Marietta Laboratories and Anaconda Aluminium Co. It took four years of diligent work to complete this comprehensive successor to the classic volume, Aluminium, published by ASM in 1967. Contents: Properties of Pure Aluminum Constitution of Alloys Microstructure of Alloys Work Hardening Recovery, Recrystalization and Growth Metallurgy of Heat Treatment and General Principles of Precipitation Hardening Effects of Alloying Elements and Impurities on Properties Corrosion Behaviour Properties of Commercial Casting Alloys Properties of Commercial Wrought Alloys Aluminum Powder and Powder Metallurgy Products.
Download or read book High Entropy Alloys written by Michael C. Gao and published by Springer. This book was released on 2016-04-27 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a systematic and comprehensive description of high-entropy alloys (HEAs). The authors summarize key properties of HEAs from the perspective of both fundamental understanding and applications, which are supported by in-depth analyses. The book also contains computational modeling in tackling HEAs, which help elucidate the formation mechanisms and properties of HEAs from various length and time scales.
Download or read book Concepts in Physical Metallurgy written by Lavakumar Avala and published by Morgan & Claypool Publishers. This book was released on 2017-05-02 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: The progress of civilization can be, in part, attributed to their ability to employ metallurgy. This book is an introduction to multiple facets of physical metallurgy, materials science, and engineering. As all metals are crystalline in structure, it focuses attention on these structures and how the formation of these crystals are responsible for certain aspects of the material's chemical and physical behaviour. Concepts in Physical Metallurgy also discusses the mechanical properties of metals, the theory of alloys, and physical metallurgy of ferrous and non-ferrous alloys.
Download or read book Physical Metallurgy written by David E. Laughlin and published by Newnes. This book was released on 2014-07-24 with total page 2963 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fifth edition of the highly regarded family of titles that first published in 1965 is now a three-volume set and over 3,000 pages. All chapters have been revised and expanded, either by the fourth edition authors alone or jointly with new co-authors. Chapters have been added on the physical metallurgy of light alloys, the physical metallurgy of titanium alloys, atom probe field ion microscopy, computational metallurgy, and orientational imaging microscopy. The books incorporate the latest experimental research results and theoretical insights. Several thousand citations to the research and review literature are included. - Exhaustively synthesizes the pertinent, contemporary developments within physical metallurgy so scientists have authoritative information at their fingertips - Replaces existing articles and monographs with a single, complete solution - Enables metallurgists to predict changes and create novel alloys and processes
Download or read book Physical Metallurgy written by William F. Hosford and published by CRC Press. This book was released on 2010-04-05 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: For students ready to advance in their study of metals, Physical Metallurgy, Second Edition uses engaging historical and contemporary examples that relate to the applications of concepts in each chapter.This book combines theoretical concepts, real alloy systems, processing procedures, and examples of real-world applications. The author uses his ex
Download or read book The Theory of Transformations in Metals and Alloys written by John Christian and published by Newnes. This book was released on 2002-12-10 with total page 1202 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work is a classic reference text for metallurgists, material scientists and crystallographers. The first edition was published in 1965. The first part of that edition was revised and re-published in 1975 and again in 1981. The present two-part set represents the eagerly awaited full revision by the author of his seminal work, now published as Parts I and II. Professor Christian was one of the founding fathers of materials science and highly respected worldwide. The new edition of his book deserves a place on the bookshelf of every materials science and engineering department. Suitable thermal and mechanical treatments will produce extensive rearrangements of the atoms in metals and alloys, and corresponding marked variations in physical and chemical properties. This book describes how such changes in the atomic configuration are effected, and discusses the associated kinetic and crystallographic features. It deals with areas such as lattice geometry, point defects, dislocations, stacking faults, grain and interphase boundaries, solid solutions, diffusion, etc. The first part covers the general theory while the second part is concerned with descriptions of specific types of transformations.
Download or read book PHYSICAL METALLURGY PRINCIPLES AND PRACTICE Third Edition written by RAGHAVAN, V. and published by PHI Learning Pvt. Ltd.. This book was released on 2015-11-10 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: This well-established book, now in its Third Edition, presents the principles and applications of engineering metals and alloys in a highly readable form. This new edition retains all the basic topics covered in earlier editions such as phase diagrams, phase transformations, heat treatment of steels and nonferrous alloys, shape memory alloys, solidification, fatigue, fracture and corrosion, as well as applications of engineering alloys. A new chapter on ‘Nanomaterials’ has been added (Chapter 8). The field of nano-materials is interdisciplinary in nature, covering many disciplines including physical metallurgy. Intended as a text for undergraduate courses in Metallurgical and Materials Engineering, the book is also suitable for students preparing for associate membership examination of the Indian Institute of Metals (AMIIM) and other professional examinations like AMIE.
Download or read book Aluminum Lithium Alloys written by Olga Grushko and published by CRC Press. This book was released on 2016-11-18 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aluminum–Lithium Alloys: Process Metallurgy, Physical Metallurgy, and Welding provides theoretical foundations of the technological processes for melting, casting, forming, heat treatment, and welding of Al–Li alloys. It contains a critical survey of the research in the field and presents data on commercial Al–Li alloys, their phase composition, microstructure, and heat treatment of the ingots, sheets, forgings, and welds of Al–Li alloys. It details oxidation kinetics, protective alloying, hydrogen in Al–Li alloys, and crack susceptibility. It also discusses grain structure and solidification, as well as structural and mechanical properties. The book is illustrated with examples of Al–Li alloy applications in aircraft structures. Based on the vast experience of the coauthors, the book presents recommendations on solving practical problems involved with melting and casting ingots, welding of Al–Li alloys, and producing massive stampings for welded products. Provides comprehensive coverage of Al–Li alloys, not available in any single source. Presents research that is at the basis of the production technology for of ingots and products made of Al–Li alloys. Combines basic science with applied research, including upscaling and industrial implementation. Covers welding of Al–Li alloys in detail. Discusses gas and alkali-earth impurities in Al–Li alloys. Describes technological recommendations on casting and deformation of Al–Li alloys.
Download or read book Physical Metallurgy Principles written by Robert E. Reed-Hill and published by Van Nostrand Reinhold Company. This book was released on 1973 with total page 940 pages. Available in PDF, EPUB and Kindle. Book excerpt: * Covers all aspects of physical metallurgy and behavior of metals and alloys. * Presents the principles on which metallurgy is based. * Concepts such as heat affected zone and structure-property relationships are covered. * Principles of casting are clearly outlined in the chapter on solidification. * Advanced treatment on physical metallurgy provides specialized information on metals.
Download or read book Phase Transformations in Metals and Alloys Third Edition Revised Reprint written by David A. Porter and published by CRC Press. This book was released on 1992-09-10 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the decade since the first edition of this popular text was published, the metallurgical field has undergone rapid developments in many sectors. Nonetheless, the underlying principles governing these developments remain the same. A textbook that presents these advances within the context of the fundamentals is greatly needed by instructors in the field Phase Transformations in Metals and Alloys, Second Edition maintains the simplicity that undergraduate instructors and students have come to appreciate while updating and expanding coverage of recently developed methods and materials. The book is effectively divided into two parts. The beginning chapters contain the background material necessary for understanding phase transformations - thermodynamics, kinetics, diffusion theory and the structure and properties of interfaces. The following chapters deal with specific transformations - solidification, diffusional transformation in solids and diffusionless transformation. Case studies of engineering alloys are incorporated to provide a link between theory and practice. New additions include an extended list of further reading at the end of each chapter and a section containing complete solutions to all exercises in the book Designed for final year undergraduate and postgraduate students of metallurgy, materials science, or engineering materials, this is an ideal textbook for both students and instructors.
Download or read book Elements of Metallurgy and Engineering Alloys written by Flake C. Campbell and published by ASM International. This book was released on 2008-01-01 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical reference provides thorough and systematic coverage on both basic metallurgy and the practical engineering aspects of metallic material selection and application.
Download or read book Fundamentals of Magnesium Alloy Metallurgy written by Mihriban O Pekguleryuz and published by Elsevier. This book was released on 2013-03-11 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnesium and magnesium alloys offer a wealth of valuable properties, making them of great interest for use across a wide range of fields. This has led to extensive research focused on understanding the properties of magnesium and how these can be controlled during processing. Fundamentals of magnesium alloy metallurgy presents an authoritative overview of all aspects of magnesium alloy metallurgy, including physical metallurgy, deformation, corrosion and applications.Beginning with an introduction to the primary production of magnesium, the book goes on to discuss physical metallurgy of magnesium and thermodynamic properties of magnesium alloys. Further chapters focus on understanding precipitation processes of magnesium alloys, alloying behaviour of magnesium, and alloy design. The formation, corrosion and surface finishing of magnesium and its alloys are reviewed, before Fundamentals of magnesium alloy metallurgy concludes by exploring applications across a range of fields. Aerospace, automotive and other structural applications of magnesium are considered, followed by magnesium-based metal matrix composites and the use of magnesium in medical applications.With its distinguished editors and international team of expert contributors, Fundamentals of magnesium alloy metallurgy is a comprehensive tool for all those involved in the production and application of magnesium and its alloys, including manufacturers, welders, heat-treatment and coating companies, engineers, metallurgists, researchers, designers and scientists working with these important materials. - Overviews all aspects of magnesium alloy metallurgy - Discusses physical metallurgy of magnesium and thermodynamic properties of magnesium alloys - Reviews the formation, corrosion and surface finishing of magnesium and its alloys
Download or read book Solidification and Solid State Transformations of Metals and Alloys written by Maria Jose Quintana Hernandez and published by Elsevier. This book was released on 2017-03-16 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solidification and Solid-State Transformations of Metals and Alloys describes solidification and the industrial problems presented when manufacturing structural parts by casting, or semi-products for forging, in order to obtain large, flat or specifically shaped parts. Solidification follows the nucleation and growth model, which will also be applied in solid-state transformations, such as those taking place because of changes in solubility and allotropy or changes produced by recrystallization. It also explains the heat treatments that, through controlled heating, holding and cooling, allow the metals to have specific structures and properties. It also describes the correct interpretation of phase diagrams so the reader can comprehend the behaviour of iron, aluminium, copper, lead, tin, nickel, titanium, etc. and the alloys between them or with other metallic or metalloid elements. This book can be used by graduate and undergraduate students, as well as physicists, chemists and engineers who wish to study the subject of Metallic Materials and Physical Metallurgy, specifically industrial applications where casting of metals and alloys, as well as heat treatments are relevant to the quality assurance of manufacturing processes. It will be especially useful for readers with little to no knowledge on the subject, and who are looking for a book that addresses the fundamentals of manufacturing, treatment and properties of metals and alloys. - Uses theoretical formulas to obtain realistic data from industrial operations - Includes detailed explanations of chemical, physical and thermodynamic phenomena to allow for a more accessible approach that will appeal to a wider audience - Utilizes micrographs to illustrate and demonstrate different solidification and transformation processes
