Download or read book Physical Layer Multi Core Prototyping written by Maxime Pelcat and published by Springer Science & Business Media. This book was released on 2012-08-11 with total page 217 pages. Available in PDF, EPUB and Kindle. Book excerpt: Base stations developed according to the 3GPP Long Term Evolution (LTE) standard require unprecedented processing power. 3GPP LTE enables data rates beyond hundreds of Mbits/s by using advanced technologies, necessitating a highly complex LTE physical layer. The operating power of base stations is a significant cost for operators, and is currently optimized using state-of-the-art hardware solutions, such as heterogeneous distributed systems. The traditional system design method of porting algorithms to heterogeneous distributed systems based on test-and-refine methods is a manual, thus time-expensive, task. Physical Layer Multi-Core Prototyping: A Dataflow-Based Approach provides a clear introduction to the 3GPP LTE physical layer and to dataflow-based prototyping and programming. The difficulties in the process of 3GPP LTE physical layer porting are outlined, with particular focus on automatic partitioning and scheduling, load balancing and computation latency reduction, specifically in systems based on heterogeneous multi-core Digital Signal Processors. Multi-core prototyping methods based on algorithm dataflow modeling and architecture system-level modeling are assessed with the goal of automating and optimizing algorithm porting. With its analysis of physical layer processing and proposals of parallel programming methods, which include automatic partitioning and scheduling, Physical Layer Multi-Core Prototyping: A Dataflow-Based Approach is a key resource for researchers and students. This study of LTE algorithms which require dynamic or static assignment and dynamic or static scheduling, allows readers to reassess and expand their knowledge of this vital component of LTE base station design.
Download or read book Electronic Design Automation for IC System Design Verification and Testing written by Luciano Lavagno and published by CRC Press. This book was released on 2017-12-19 with total page 773 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first of two volumes in the Electronic Design Automation for Integrated Circuits Handbook, Second Edition, Electronic Design Automation for IC System Design, Verification, and Testing thoroughly examines system-level design, microarchitectural design, logic verification, and testing. Chapters contributed by leading experts authoritatively discuss processor modeling and design tools, using performance metrics to select microprocessor cores for integrated circuit (IC) designs, design and verification languages, digital simulation, hardware acceleration and emulation, and much more. New to This Edition: Major updates appearing in the initial phases of the design flow, where the level of abstraction keeps rising to support more functionality with lower non-recurring engineering (NRE) costs Significant revisions reflected in the final phases of the design flow, where the complexity due to smaller and smaller geometries is compounded by the slow progress of shorter wavelength lithography New coverage of cutting-edge applications and approaches realized in the decade since publication of the previous edition—these are illustrated by new chapters on high-level synthesis, system-on-chip (SoC) block-based design, and back-annotating system-level models Offering improved depth and modernity, Electronic Design Automation for IC System Design, Verification, and Testing provides a valuable, state-of-the-art reference for electronic design automation (EDA) students, researchers, and professionals.
Download or read book Broadband Wireless Access Networks for 4G Theory Application and Experimentation written by Santos, Raul Aquino and published by IGI Global. This book was released on 2013-12-31 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the increased functionality demand for mobile speed and access in our everyday lives, broadband wireless networks have emerged as the solution in providing high data rate communications systems to meet these growing needs. Broadband Wireless Access Networks for 4G: Theory, Application, and Experimentation presents the latest trends and research on mobile ad hoc networks, vehicular ad hoc networks, and routing algorithms which occur within various mobile networks. This publication smartly combines knowledge and experience from enthusiastic scholars and expert researchers in the area of wideband and broadband wireless networks. Students, professors, researchers, and other professionals in the field will benefit from this books practical applications and relevant studies.
Download or read book Physical Design for 3D Integrated Circuits written by Aida Todri-Sanial and published by CRC Press. This book was released on 2017-12-19 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physical Design for 3D Integrated Circuits reveals how to effectively and optimally design 3D integrated circuits (ICs). It also analyzes the design tools for 3D circuits while exploiting the benefits of 3D technology. The book begins by offering an overview of physical design challenges with respect to conventional 2D circuits, and then each chapter delivers an in-depth look at a specific physical design topic. This comprehensive reference: Contains extensive coverage of the physical design of 2.5D/3D ICs and monolithic 3D ICs Supplies state-of-the-art solutions for challenges unique to 3D circuit design Features contributions from renowned experts in their respective fields Physical Design for 3D Integrated Circuits provides a single, convenient source of cutting-edge information for those pursuing 2.5D/3D technology.
Download or read book The IoT Physical Layer written by Ibrahim (Abe) M. Elfadel and published by Springer. This book was released on 2018-09-03 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book documents some of the most recent advances on the physical layer of the Internet of Things (IoT), including sensors, circuits, and systems. The application area selected for illustrating these advances is that of autonomous, wearable systems for real-time medical diagnosis. The book is unique in that it adopts a holistic view of such systems and includes not only the sensor and processing subsystems, but also the power, communication, and security subsystems. Particular attention is paid to the integration of these IoT subsystems as well as the prototyping platforms needed for achieving such integration. Other unique features include the discussion of energy-harvesting subsystems to achieve full energy autonomy and the consideration of hardware security as a requirement for the integrity of the IoT physical layer. One unifying thread of the various designs considered in this book is that they have all been fabricated and tested in an advanced, low-power CMOS process, namely GLOBALFOUNDRIES 65nm CMOS LPe.
Download or read book Fast and Effective Embedded Systems Design written by Tim Wilmshurst and published by Newnes. This book was released on 2016-10-08 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fast and Effective Embedded Systems Design is a fast-moving introduction to embedded systems design, applying the innovative ARM mbed and its web-based development environment. Each chapter introduces a major topic in embedded systems, and proceeds as a series of practical experiments, adopting a "learning through doing" strategy. Minimal background knowledge is needed to start. C/C++ programming is applied, with a step-by-step approach which allows you to get coding quickly. Once the basics are covered, the book progresses to some "hot" embedded issues – intelligent instrumentation, wireless and networked systems, digital audio and digital signal processing. In this new edition all examples and peripheral devices are updated to use the most recent libraries and peripheral devices, with increased technical depth, and introduction of the "mbed enabled" concept. Written by two experts in the field, this book reflects on the experimental results, develops and matches theory to practice, evaluates the strengths and weaknesses of the technology and techniques introduced, and considers applications in a wider context. New Chapters on: - Bluetooth and ZigBee communication - Internet communication and control, setting the scene for the 'Internet of Things' - Digital Audio, with high-fidelity applications and use of the I2S bus - Power supply, and very low power applications - The development process of moving from prototyping to small-scale or mass manufacture, with a commercial case study. - Updates all examples and peripheral devices to use the most recent libraries and peripheral products - Includes examples with touch screen displays and includes high definition audio input/output with the I2S interface - Covers the development process of moving from prototyping to small-scale or mass manufacture with commercial case studies - Covers hot embedded issues such as intelligent instrumentation, networked systems, closed loop control, and digital signal processing
Download or read book Smart Antennas written by Thomas Kaiser and published by Hindawi Publishing Corporation. This book was released on 2005 with total page 891 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart Antennas—State of the Art brings together the broad expertise of 41 European experts in smart antennas. They provide a comprehensive review and an extensive analysis of the recent progress and new results generated during the last years in almost all fields of smart antennas and MIMO (multiple-input multiple-output) transmission. The following represents a summarized table of content.Receiver: space-time processing, antenna combining, reduced rank processing, robust beamforming, subspace methods, synchronization, equalization, multiuser detection, iterative methods Channel: propagation, measurements and sounding, modelling, channel estimation, direction-of-arrival estimation, subscriber location estimation Transmitter: space-time block coding, channel side information, unified design of linear transceivers, ill-conditioned channels, MIMO-MAC strategies Network Theory: channel capacity, network capacity, multihop networks Technology: antenna design, transceivers, demonstrators and testbeds, future air interfaces Applications and Systems: 3G system and link level aspects, MIMO HSDPA, MIMO-WLAN/UMTS implementation issues This book serves as a reference for scientists and engineers who need to be aware of the leading edge research in multiple-antenna communications, an essential technology for emerging broadband wireless systems.
Download or read book 5G System Design written by Patrick Marsch and published by John Wiley & Sons. This book was released on 2018-03-28 with total page 605 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of the latest research and standardization progress towards the 5th generation (5G) of mobile communications technology and beyond. It covers a wide range of topics from 5G use cases and their requirements, to spectrum, 5G end-to-end (E2E) system architecture including core network (CN), transport network (TN) and radio access network (RAN) architecture, network slicing, security and network management. It further dives into the detailed functional design and the evaluation of different 5G concepts, and provides details on planned trials and pre-commercial deployments across the globe. While the book naturally captures the latest agreements in 3rd Generation Partnership Project (3GPP) New Radio (NR) Release 15, it goes significantly beyond this by describing the likely developments towards the final 5G system that will ultimately utilize a wide range of spectrum bands, address all envisioned 5G use cases, and meet or exceed the International Mobile Telecommunications (IMT) requirements for the year 2020 and beyond (IMT-2020). 5G System Design: Architectural and Functional Considerations and Long Term Research is based on the knowledge and consensus from 158 leading researchers and standardization experts from 54 companies or institutes around the globe, representing key mobile network operators, network vendors, academic institutions and regional bodies for 5G. Different from earlier books on 5G, it does not focus on single 5G technology components, but describes the full 5G system design from E2E architecture to detailed functional design, including details on 5G performance, implementation and roll-out.
Download or read book Fast and Effective Embedded Systems Design written by Rob Toulson and published by Elsevier. This book was released on 2012-08-06 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: A hands-on introduction to the field of embedded systems; A focus on fast prototyping of embedded systems; All key embedded system concepts covered through simple and effective experimentation; An understanding of ARM technology, one of the world's leaders; A practical introduction to embedded C; Applies possibly the most accessible set of tools available in the embedded world. This book is an introduction to embedded systems design, using the ARM mbed and C programming language as development tools. The mbed provides a compact, self-contained and low-cost hardware core, and the on-line compiler requires no download or installation, being accessible wherever an internet link exists. The book further combines these with a simple "breadboard" approach, whereby simple circuits are built up around the mbed, with no soldering or pcb assembly required. The book adopts a "learning through doing" approach. Each chapter is based around a major topic in embedded systems. The chapter proceeds as a series of practical experiments; the reader sets up a simple hardware system, develops and downloads a simple program, and immediately observes and tests the outcomes. The book then reflects on the experimental results, evaluating the strengths and weaknesses of the technology or technique introduced, explores how precise the link is between theory and practice, and considers applications and the wider context. The only book that explains how to use ARM's mbed development toolkit to help the speedy and easy development of embedded systems.Teaches embedded systems core principles in the context of developing quick applications, making embedded systems development an easy task for the non specialist who does not have a deep knowledge of electronics or software All key concepts are covered through simple and effective experimentation.
Download or read book Complex Digital Hardware Design written by Istvan Nagy and published by CRC Press. This book was released on 2024-05-09 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is about how to design the most complex types of digital circuit boards used inside servers, routers and other equipment, from high-level system architecture down to the low-level signal integrity concepts. It explains common structures and subsystems that can be expanded into new designs in different markets. The book is targeted at all levels of hardware engineers. There are shorter, lower-level introductions to every topic, while the book also takes the reader all they way to the most complex and most advanced topics of digital circuit design, layout design, analysis, and hardware architecture.
Download or read book Field Programmable Logic and Applications The Roadmap to Reconfigurable Computing written by Reiner W. Hartenstein and published by Springer. This book was released on 2003-06-29 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the proceedings volume of the 10th International Conference on Field Programmable Logic and its Applications (FPL), held August 27 30, 2000 in Villach, Austria, which covered areas like reconfigurable logic (RL), reconfigurable computing (RC), and its applications, and all other aspects. Its subtitle "The Roadmap to Reconfigurable Computing" reminds us, that we are currently witnessing the runaway of a breakthrough. The annual FPL series is the eldest international conference in the world covering configware and all its aspects. It was founded 1991 at Oxford University (UK) and is 2 years older than its two most important competitors usually taking place at Monterey and Napa. FPL has been held at Oxford, Vienna, Prague, Darmstadt, London, Tallinn, and Glasgow (also see: http://www. fpl. uni kl. de/FPL/). The New Case for Reconfigurable Platforms: Converging Media. Indicated by palmtops, smart mobile phones, many other portables, and consumer electronics, media such as voice, sound, video, TV, wireless, cable, telephone, and Internet continue to converge. This creates new opportunities and even necessities for reconfigurable platform usage. The new converged media require high volume, flexible, multi purpose, multi standard, low power products adaptable to support evolving standards, emerging new standards, field upgrades, bug fixes, and, to meet the needs of a growing number of different kinds of services offered to zillions of individual subscribers preferring different media mixes.
Download or read book Trustworthy Cyber Physical Systems Engineering written by Alexander Romanovsky and published by CRC Press. This book was released on 2016-10-03 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focuses on various issues related to engineering trustworthy cyber-physical systems Contributes to the improved understanding of system concepts and standardization, and presents a research roadmap Emphasizes tool-supported methods, and focuses on practical issues faced by practitioners Covers the experience of deploying advanced system engineering methods in industry Includes contributions from leading international experts Offers supplementary material on the book website: http://research.nii.ac.jp/tcps/
Download or read book Neuromorphic Computing Principles and Organization written by Abderazek Ben Abdallah and published by Springer Nature. This book was released on 2022-05-31 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on neuromorphic computing principles and organization and how to build fault-tolerant scalable hardware for large and medium scale spiking neural networks with learning capabilities. In addition, the book describes in a comprehensive way the organization and how to design a spike-based neuromorphic system to perform network of spiking neurons communication, computing, and adaptive learning for emerging AI applications. The book begins with an overview of neuromorphic computing systems and explores the fundamental concepts of artificial neural networks. Next, we discuss artificial neurons and how they have evolved in their representation of biological neuronal dynamics. Afterward, we discuss implementing these neural networks in neuron models, storage technologies, inter-neuron communication networks, learning, and various design approaches. Then, comes the fundamental design principle to build an efficient neuromorphic system in hardware. The challenges that need to be solved toward building a spiking neural network architecture with many synapses are discussed. Learning in neuromorphic computing systems and the major emerging memory technologies that promise neuromorphic computing are then given. A particular chapter of this book is dedicated to the circuits and architectures used for communication in neuromorphic systems. In particular, the Network-on-Chip fabric is introduced for receiving and transmitting spikes following the Address Event Representation (AER) protocol and the memory accessing method. In addition, the interconnect design principle is covered to help understand the overall concept of on-chip and off-chip communication. Advanced on-chip interconnect technologies, including si-photonic three-dimensional interconnects and fault-tolerant routing algorithms, are also given. The book also covers the main threats of reliability and discusses several recovery methods for multicore neuromorphic systems. This is important for reliable processing in several embedded neuromorphic applications. A reconfigurable design approach that supports multiple target applications via dynamic reconfigurability, network topology independence, and network expandability is also described in the subsequent chapters. The book ends with a case study about a real hardware-software design of a reliable three-dimensional digital neuromorphic processor geared explicitly toward the 3D-ICs biological brain’s three-dimensional structure. The platform enables high integration density and slight spike delay of spiking networks and features a scalable design. We present methods for fault detection and recovery in a neuromorphic system as well. Neuromorphic Computing Principles and Organization is an excellent resource for researchers, scientists, graduate students, and hardware-software engineers dealing with the ever-increasing demands on fault-tolerance, scalability, and low power consumption. It is also an excellent resource for teaching advanced undergraduate and graduate students about the fundamentals concepts, organization, and actual hardware-software design of reliable neuromorphic systems with learning and fault-tolerance capabilities.
Download or read book Electric Vehicle Systems Architecture and Standardization Needs written by Beate Müller and published by Springer. This book was released on 2015-02-25 with total page 161 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited volume presents research results of the PPP European Green Vehicle Initiative (EGVI), focusing on Electric Vehicle Systems Architecture and Standardization Needs. The objectives of energy efficiency and zero emissions in road transportation imply a paradigm shift in the concept of the automobile regarding design, materials, and propulsion technology. A redesign of the electric and electronic architecture provides in many aspects additional potential for reaching these goals. At the same time, standardization within a broad range of features, components and systems is a key enabling factor for a successful market entry of the electric vehicle (EV). It would lower production cost, increase interoperability and compatibilities, and sustain market penetration. Hence, novel architectures and testing concepts and standardization approaches for the EV have been the topic of an expert workshop of the European Green Vehicles Initiative PPP. This book contains the contributions of current European research projects on EV architecture and an expert view on the status of EV standardization. The target audience primarily comprises researchers and experts in the field.
Download or read book Multi Processor System on Chip 2 written by and published by John Wiley & Sons. This book was released on 2021-05-11 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Multi-Processor System-on-Chip (MPSoC) is the key component for complex applications. These applications put huge pressure on memory, communication devices and computing units. This book, presented in two volumes – Architectures and Applications – therefore celebrates the 20th anniversary of MPSoC, an interdisciplinary forum that focuses on multi-core and multi-processor hardware and software systems. It is this interdisciplinarity which has led to MPSoC bringing together experts in these fields from around the world, over the last two decades. Multi-Processor System-on-Chip 2 covers application-specific MPSoC design, including compilers and architecture exploration. This second volume describes optimization methods, tools to optimize and port specific applications on MPSoC architectures. Details on compilation, power consumption and wireless communication are also presented, as well as examples of modeling frameworks and CAD tools. Explanations of specific platforms for automotive and real-time computing are also included.
Download or read book Recent Trends in Intelligent Computing Communication and Devices written by Vipul Jain and published by Springer Nature. This book was released on 2019-10-02 with total page 1040 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers a collection of high-quality, peer-reviewed research papers presented at the International Conference on Intelligent Computing, Communication and Devices (ICCD 2018), which address three core dimensions of the intelligent sciences—intelligent computing, intelligent communication, and intelligent devices. Intelligent computing includes areas such as intelligent and distributed computing, intelligent grid and cloud computing, Internet of Things, soft computing and engineering applications, data mining and knowledge discovery, semantic and web technology, hybrid systems, agent computing, bioinformatics, and recommendation systems. In turn, intelligent communication is concerned with communication and network technologies, such as mobile broadband and all-optical networks, which are the key to groundbreaking advances in intelligent communication technologies. It includes communication hardware, software and networked intelligence, mobile technologies, machine-to-machine communication networks, speech and natural language processing, routing techniques and network analytics, wireless ad hoc and sensor networks, communications and information security, signal, image and video processing, network management, and traffic engineering. Lastly, intelligent devices refer to any equipment, instruments, or machines that have their own computing capability, and covers areas such as embedded systems, radiofrequency identification (RFID), radiofrequency microelectromechanical systems (RF MEMS), very large-scale integration (VLSI) design and electronic devices, analog and mixed-signal integrated circuit (IC) design and testing, microelectromechanical systems (MEMS) and microsystems, solar cells and photonics, nanodevices, single electron and spintronic devices, space electronics, and intelligent robotics.
Download or read book Visible Light Communications written by Zabih Ghassemlooy and published by CRC Press. This book was released on 2017-06-26 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: Visible Light Communications, written by leading researchers, provides a comprehensive overview of theory, stimulation, design, implementation, and applications. The book is divided into two parts – the first devoted to the underlying theoretical concepts of the VLC and the second part covers VLC applications. Visible Light Communications is an emerging topic with multiple functionalities including data communication, indoor localization, 5G wireless communication networks, security, and small cell optimization. This concise book will be of valuable interest from beginners to researchers in the field.
