Download or read book Physical Chemistry of Powder Metals Production and Processing written by W. Murray Small and published by . This book was released on 1989 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Physical Chemistry of Powder Metals Production and Processing written by TMS-AIME Physical Chemistry Committee and published by . This book was released on 1989-01-01 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Physical Chemistry of Powder Metals Production and Processing written by International Symposium on Physical Chemistry of P and published by . This book was released on 1989-01-01 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electrochemical Production of Metal Powders written by Stojan S. Djokić and published by Springer Science & Business Media. This book was released on 2012-03-24 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new volume of Modern Aspects of Electrochemistry reviews different methods for the production of metal powders including mechanical, chemical and electrochemical powders. Electrochemically produced metal powders are of high purity and they are extremely active during sintering. These powders find a wide-range of applications in automotive, aerospace, energy device and electronics industries.
Download or read book Metallic Powders for Additive Manufacturing written by Enrique J. Lavernia and published by John Wiley & Sons. This book was released on 2024-02-02 with total page 613 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metallic Powders for Additive Manufacturing Overview of successful pathways for producing metal powders for additive manufacturing of high-performance metallic parts and components with tailored properties Metallic Powders for Additive Manufacturing introduces the readers to the science and technology of atomized metal powders beyond empirical knowledge and the fundamental relationships among the chemistry, microstructure, and morphology of atomized metallic powders and their behavior during additive manufacturing. The text sets a foundation of the underlying science that controls the formation and microstructure of atomized metallic droplets, including the relations among the properties of metallic powders, their performance during the manufacturing processes, and the resulting products. Other topics covered include the influence of powder on defect formation, residual stress, mechanical behavior, and physical properties. The concluding two chapters encompass considerations of broader societal implications and overarching themes, including the exploration of alternative feedstock materials, economic analysis, and sustainability assessment. These chapters offer valuable perspectives on the prospective trajectory of the field. Written by a team of experienced and highly qualified professors and academics, Metallic Powders for Additive Manufacturing includes information on: Atomization techniques such as Vacuum Induction Gas Atomization (VIGA), Electrode Induction Melting Gas Atomization (EIMGA), and Plasma Rotating Electrode Process (PREP) Atomization science and technology, covering control of atomization parameters, powder size distribution, effect of processing variables, and theoretical models of atomization Heat transfer and solidification of droplets, covering nucleation, microstructure development, and important thermal and solidification conditions during atomization Atomization of Al, Fe, Ni, Co, Ti, and high entropy alloys, as well as composite powders for additive manufacturing, and guidelines for atomization equipment and powder handling Fundamental processing principles in a variety of metal additive manufacturing processes Powder characteristics and requirements for different additive manufacturing processes Effect of powder chemistry and physical characteristics on additive manufacturing processes, and the microstructure and properties of the built parts Evaluation of alternative feedstock sources for metal additive manufacturing, beyond gas atomized powder Economic and sustainability perspectives on powder production and additive manufacturing Metallic Powders for Additive Manufacturing is an excellent combination of rigorous fundamentals and a practice-oriented and forward-looking resource on the subject for materials scientists and practicing engineers seeking to understand, optimize, and further develop the field of powder production and additive manufacturing.
Download or read book Metal Powder Based Additive Manufacturing written by Kun Zhou and published by John Wiley & Sons. This book was released on 2023-05-17 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Powder—Based Additive Manufacturing Highly comprehensive resource covering all key aspects of the current developments of metal powder—based additive manufacturing Metal Powder—Based Additive Manufacturing provides valuable knowledge and critical insights regarding the recent advances in various metal powder—based additive manufacturing techniques. This book also reviews typical powder preparation processes and highlights the significance of metal powder—based additive manufacturing for various industrial applications. The key features covered in this book: A rigorous overview of the underlying theories and practical applications of metal powder—based additive manufacturing techniques, including laser powder bed fusion, electron beam melting, laser-based directed energy deposition, and metal binder jetting. An expansive introduction of each technique and its significance pertaining to the printing processes, metallurgical defects, powder materials, equipment, and the microstructures and mechanical properties of the printed parts. A deep exploration of the preparation processes of metal powders for additive manufacturing and the effects of different processes on the powder properties. Comprehensive case studies of parts printed by metal powder—based additive manufacturing for various industrial applications. By providing extensive coverage of relevant concepts in the field of metal powder—based additive manufacturing, this book highlights its essential role in Industry 4.0 and serves as a valuable resource for scientists, engineers, and students in materials science, powder metallurgy, physics, and chemistry. The rich research experience of the authors in additive manufacturing ensures that the readers are provided with both an in-depth understanding and informative technical guidance of metal powder—based additive manufacturing.
Download or read book Powder Metallurgy written by S. A. Tsukerman and published by Elsevier. This book was released on 2013-10-22 with total page 153 pages. Available in PDF, EPUB and Kindle. Book excerpt: Powder Metallurgy discusses the production of metal powders and other materials made from it. It defines the meaning of metal powders with some illustrations. The book also identifies the processes similar between the production of metal powder and ceramic products. The technology involved and the variation in the process of metallurgy are covered in some chapters of the book. The book enumerates certain advantages in using powder metallurgy over other processes. Methods such as the reduction of the oxides of metals, electrolysis, thermal dissociation, and chemical disintegration are explained. The origin and improvement made on the method are discussed in detail. The goods created using the process are also explained, as well as the types of metals that are being used. A chapter of the book focuses on the flaws of powder metallurgy. The book will provide useful information to metal smiths, chemists, students, and researchers in the field of chemistry.
Download or read book Powder Metallurgy Technology and Equipment Selected Topics written by Gopal S. Upadhyaya and published by Trans Tech Publications Ltd. This book was released on 2012-01-03 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters BCI (WoS). Powder metallurgy is one of the leading processes used for forming engineering components. The technology, as developed at the beginning of the 20th century, has since advanced significantly from both the materials and energy-conservation points of view. Novel, and automated, equipment has played a significant role in enhancing the growth of the powder metallurgy industry. The present work includes, in addition to the editors introductory paper, eleven invited papers from organizations of international repute. In brief, the book presents expert assessments from the major metal-powder and powder-metallurgy equipment-makers in the world. This distinguishes it from other works, which are contributed mainly by academics. The book concentrates on particular topics of interest and does not attempt to be comprehensive.
Download or read book Powder Metallurgy Stainless Steels written by Erhard Klar and published by ASM International. This book was released on 2007-01-01 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Powder Metallurgy written by G. Dowson and published by Springer. This book was released on 1990 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Powder metallurgy, commonly designated by its initial letters asPM or PM, may be defined as the production of useful artefacts from metal powder without passing through the molten state. This introductory text examines the processes by which these powders are produced, and explores their behaviour in the subsequent consolidation stages.
Download or read book Physical Chemistry of Metallurgical Processes Second Edition written by Mohammad Shamsuddin and published by Springer Nature. This book was released on 2021-06-22 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: This updated, second edition retains its classroom-tested treatment of physical chemistry of metallurgical topics, such as roasting of sulfide minerals, matte smelting, converting, structure, properties and theories of slag, reduction of oxides and reduction smelting, interfacial phenomena, steelmaking, secondary steelmaking, role of halides in extraction of metals, refining, hydrometallurgy and electrometallurgy, and adds new data in worked-out examples as well as up-to-date references to the literature. The book further explains the physical chemistry of various metallurgical topics, steps involved in extraction of metals, such as roasting, matte smelting/converting, reduction smelting, steelmaking reactions, deoxidation, stainless steelmaking, vacuum degassing, refining, leaching, chemical precipitation, ion exchange, solvent extraction, cementation, gaseous reduction and electrowinning. Each topic is illustrated with appropriate examples of applications of the technique in extraction of some common, reactive, rare, or refractory metal together with worked out problems explaining the principle of the operation. The problems require imagination and critical analyses and also encourage readers for creative application of thermodynamic data in metal extraction. Updates and condenses text throughout the book by sequential arrangement of paragraphs in different chapters; Maximizes readers’ understanding of the physicochemical principles involved in extraction/production of common and rare/reactive metals by pyro- as well as hydrometallurgical routes; Reinforces concepts presented with worked examples in each chapter explaining the process steps; Explains the physical chemistry of various metallurgical steps, such as roasting, matte smelting/converting, and reduction smelting, steelmaking, aqueous processing etc. in extraction of metals; Collects and uniformly presents scattered information on physicochemical principles of metal production from various books and journals.
Download or read book Handbook of Non Ferrous Metal Powders written by Oleg D Neikov and published by Elsevier. This book was released on 2009-02-24 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: The manufacture and use of the powders of non-ferrous metals has been taking place for many years in what was previously Soviet Russia, and a huge amount of knowledge and experience has built up in that country over the last forty years or so. Although accounts of the topic have been published in the Russian language, no English language account has existed until now. Six prominent academics and industrialists from the Ukraine and Russia have produced this highly-detailed account which covers the classification, manufacturing methods, treatment and properties of the non-ferrous metals ( aluminium, titanium, magnesium, copper, nickel, cobalt, zinc, cadmium, lead, tin, bismuth, noble metals and earth metals). The result is a formidable reference source for those in all aspects of the metal powder industry. Covers the manufacturing methods, properties and importance of the following metals: aluminium, titanium, magnesium, copper, nickel, cobalt, zinc, cadmium, noble metals, rare earth metals, lead, tin and bismuth Expert Russian team of authors, all very experienced English translation and update of book previously published in Russian
Download or read book Advances in Powder Metallurgy written by Isaac Chang and published by Elsevier. This book was released on 2013-08-31 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Powder metallurgy (PM) is a popular metal forming technology used to produce dense and precision components. Different powder and component forming routes can be used to create an end product with specific properties for a particular application or industry. Advances in powder metallurgy explores a range of materials and techniques used for powder metallurgy and the use of this technology across a variety of application areas. Part one discusses the forming and shaping of metal powders and includes chapters on atomisation techniques, electrolysis and plasma synthesis of metallic nanopowders. Part two goes on to highlight specific materials and their properties including advanced powdered steel alloys, porous metals and titanium alloys. Part three reviews the manufacture and densification of PM components and explores joining techniques, process optimisation in powder component manufacturing and non-destructive evaluation of PM parts. Finally, part four focusses on the applications of PM in the automotive industry and the use of PM in the production of cutting tools and biomaterials. Advances in powder metallurgy is a standard reference for structural engineers and component manufacturers in the metal forming industry, professionals working in industries that use PM components and academics with a research interest in the field. Discusses the forming and shaping of metal powders and includes chapters on atomisation techniques Highlights specific materials and their properties including advanced powdered steel alloys, porous metals and titanium alloys Reviews the manufacture and densification of PM components and explores joining techniques
Download or read book Production and Processing of Fine Particles written by A. J. Plumpton and published by Elsevier. This book was released on 2017-05-04 with total page 929 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the proceedings of an international symposium organised by the Metallurgical Society of the Canadian Institute of Mining and Metallurgy. The aims of the symposium were to discuss fundamental and practical aspects of the technology for the production of fine inorganic particles for the metals, industrial minerals and advanced ceramics sectors, to highlight particle characterization methods and developments, and to review major advances in the processing and extractive metallurgy of finely-sized minerals. 96 conference papers by authors from 19 countries addressed such topics as particle morphology and size analysis, physical and chemical methods for producing fine particles, processing of minerals using gravity, magnetic and electrostatic separation, flotation and flocculation, phase separation involving fine particles, and the hydrometallurgy and pyroprocessing of fine particles. This book will be of interest to mineral processing scientists and engineers, ceramicists, extractive metallurgists and chemical engineers, who are faced with the increasing significance of inorganic fine particles either as valuable products or as materials to be treated in mineral processing systems.
Download or read book Advances in powder metallurgy written by C. Suryanarayana and published by Elsevier Inc. Chapters. This book was released on 2013-08-31 with total page 35 pages. Available in PDF, EPUB and Kindle. Book excerpt: This chapter introduces the novel method of mechanochemical synthesis as an effective method for synthesizing metal powders in the nanocrystalline state. After introducing the basic principles of the process, process parameters that affect the constitution and microstructure of the processed powders are discussed. The mechanisms of alloying and grain refinement are also described. Methods for achieving the smallest possible grain size are highlighted. Current problems associated with the consolidation of powders to bulk shape are described. The ubiquitous problem of powder contamination during milling and solutions to eliminate or minimize this are also emphasized.
Download or read book Fundamentals of Aluminium Metallurgy written by Roger Lumley and published by Elsevier. This book was released on 2010-11-25 with total page 862 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aluminium is an important metal in manufacturing, due to its versatile properties and the many applications of both the processed metal and its alloys in different industries. Fundamentals of aluminium metallurgy provides a comprehensive overview of the production, properties and processing of aluminium, and its applications in manufacturing industries. Part one discusses different methods of producing and casting aluminium, covering areas such as casting of alloys, quality issues and specific production methods such as high-pressure diecasting. The metallurgical properties of aluminium and its alloys are reviewed in Part two, with chapters on such topics as hardening, precipitation processes and solute partitioning and clustering, as well as properties such as fracture resistance. Finally, Part three includes chapters on joining, laser sintering and other methods of processing aluminium, and its applications in particular areas of industry such as aerospace. With its distinguished editor and team of expert contributors, Fundamentals of aluminium metallurgy is a standard reference for researchers in metallurgy, as well as all those involved in the manufacture and use of aluminium products. Provides a comprehensive overview of the production, properties and processing of aluminium, and its applications in manufacturing industries Considers many issues of central importance in aluminium production and utilization considering quality issues and design for fatigue growth resistance Metallurgical properties of aluminium and its alloys are further explored with particular reference to work hardening and applications of industrial alloys
Download or read book Handbook of Mathematical Relations in Particulate Materials Processing written by Randall M. German and published by John Wiley & Sons. This book was released on 2008-09-09 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: The only handbook of mathematical relations with a focus on particulate materials processing The National Science Foundation estimates that over 35% of materials-related funding is now directed toward modeling. In part, this reflects the increased knowledge and the high cost of experimental work. However, currently there is no organized reference book to help the particulate materials community with sorting out various relations. This book fills that important need, providing readers with a quick-reference handbook for easy consultation. This one-of-a-kind handbook gives readers the relevant mathematical relations needed to model behavior, generate computer simulations, analyze experiment data, and quantify physical and chemical phenomena commonly found in particulate materials processing. It goes beyond the traditional barriers of only one material class by covering the major areas in ceramics, cemented carbides, powder metallurgy, and particulate materials. In many cases, the governing equations are the same but the terms are material-specific. To rise above these differences, the authors have assembled the basic mathematics around the following topical structure: Powder technology relations, such as those encountered in atomization, milling, powder production, powder characterization, mixing, particle packing, and powder testing Powder processing, such as uniaxial compaction, injection molding, slurry and paste shaping techniques, polymer pyrolysis, sintering, hot isostatic pressing, and forging, with accompanying relations associated with microstructure development and microstructure coarsening Finishing operations, such as surface treatments, heat treatments, microstructure analysis, material testing, data analysis, and structure-property relations Handbook of Mathematical Relations in Particulate Materials Processing is suited for quick reference with stand-alone definitions, making it the perfect complement to existing resources used by academic researchers, corporate product and process developers, and various scientists, engineers, and technicians working in materials processing.
