Download or read book Physical Chemical Treatment of Water and Wastewater written by A. P. Sincero and published by IWA Publishing. This book was released on 2002-07-31 with total page 866 pages. Available in PDF, EPUB and Kindle. Book excerpt: The books currently available on this subject contain some elements of physical-chemical treatment of water and wastewater but fall short of giving comprehensive and authoritative coverage. They contain some equations that are not substantiated, offering empirical data based on assumptions that are therefore difficult to comprehend. This text brings together the information previously scattered in several books and adds the knowledge from the author's lectures on wastewater engineering. Physical-Chemical Treatment of Water and Wastewater is not only descriptive but is also analytical in nature. The work covers the physical unit operations and unit processes utilized in the treatment of water and wastewater. Its organization is designed to match the major processes and its approach is mathematical. The authors stress the description and derivation of processes and process parameters in mathematical terms, which can then be generalized into diverse empirical situations. Each chapter includes design equations, definitions of symbols, a glossary of terms, and worked examples. One author is an environmental engineer and a professor for over 12 years and the other has been in the practice of environmental engineering for more than 20 years. They offer a sound analytical mathematical foundation and description of processes. Physical-Chemical Treatment of Water and Wastewater fills a niche as the only dedicated textbook in the area of physical and chemical methods, providing an analytical approach applicable to a range of empirical situations Contents Introduction Characteristics of Water and Wastewater Quantity of Water and Wastewater Constituents of Water and Wastewater Unit Operations of Water and Wastewater Treatment Flow Measurements and Flow and Quality Equalizations Pumping Screening, Settling, and Flotation Mixing and Flocculation Conventional Filtration Advanced Filtration and Carbon Adsorption Aeration, Absorption, and Stripping Unit Processes of Water and Wastewater Treatment Water Softening Water Stabilization Coagulation Removal of Iron and Manganese by Chemical Precipitation Removal of Phosphorus by Chemical Precipitation Removal of Nitrogen by Nitrification-Denitrification Ion Exchange Disinfection

Download or read book Water Quality Engineering written by Mark M. Benjamin and published by John Wiley & Sons. This book was released on 2013-06-13 with total page 906 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explains the fundamental theory and mathematics of water and wastewater treatment processes By carefully explaining both the underlying theory and the underlying mathematics, this text enables readers to fully grasp the fundamentals of physical and chemical treatment processes for water and wastewater. Throughout the book, the authors use detailed examples to illustrate real-world challenges and their solutions, including step-by-step mathematical calculations. Each chapter ends with a set of problems that enable readers to put their knowledge into practice by developing and analyzing complex processes for the removal of soluble and particulate materials in order to ensure the safety of our water supplies. Designed to give readers a deep understanding of how water treatment processes actually work, Water Quality Engineering explores: Application of mass balances in continuous flow systems, enabling readers to understand and predict changes in water quality Processes for removing soluble contaminants from water, including treatment of municipal and industrial wastes Processes for removing particulate materials from water Membrane processes to remove both soluble and particulate materials Following the discussion of mass balances in continuous flow systems in the first part of the book, the authors explain and analyze water treatment processes in subsequent chapters by setting forth the relevant mass balance for the process, reactor geometry, and flow pattern under consideration. With its many examples and problem sets, Water Quality Engineering is recommended as a textbook for graduate courses in physical and chemical treatment processes for water and wastewater. By drawing together the most recent research findings and industry practices, this text is also recommended for professional environmental engineers in search of a contemporary perspective on water and wastewater treatment processes.

Download or read book Physical Chemical and Biological Treatment Processes for Water and Wastewater written by Tushar Kanti Sen and published by Nova Science Publishers. This book was released on 2015-09 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Water pollution occurs when toxic pollutants of varying kinds (organic, inorganic, radioactive and so on) are directly or indirectly discharged into water bodies without adequate treatment to remove such potential pollutants. Today's sources of these potential pollutants, which cause high deterioration of freshwater quality, are city sewage and industrial waste discharge, human agricultural practices, industrial waste disposal practices, mining activities, civil and structural work activities and obviously natural contamination with climate change. When our water is polluted, it is not only devastating to the environment but also to human health. Therefore, development of water and wastewater treatment processes to alleviate water pollution has been a challenging and demanding task for engineers, scientists and researchers. Perhaps this is even more challenging for underdeveloped and developing countries, where water and wastewater treatment facilities, knowledge and infrastructure are limited. Water and wastewater treatment processes are broad and often multidisciplinary in nature, comprising a mixture of research areas including physical, chemical and biological methods to remove or transform various potential pollutants. This is in hopes to achieve acceptable water quality and satisfy governmental and environmental protection agencies' laws and regulations. With these objectives, this book has been written in order to provide various research results and compilation and up-to-date development on the current states of knowledge and techniques in the broad field of water and wastewater treatment processes. Basically, this book will give a comprehensive understanding and advancement and application of various physical, chemical and biological treatment methods in the reduction of potential pollutants (inorganics/organics) from water and wastewater. There are a total 18 book chapters contributed by large number of expert authors around the world, covering the following main research areas: Physical, chemical and biological water treatment processes such as adsorption, biosorption, coagulation/flocculation, electrocoagulation, denitration, membrane filtration/separation, photo-catalytic reduction, advanced oxidation, nutrients removal by struvite crystallisation and nanotechnology; Physical, chemical and biological methods for municipal wastewater and industrial wastewater treatment plants such as primary-secondary sludge treatments, anaerobic digestions, aerobic treatment, activated sludge processes, dewaterability by flocculants, pre-treatments of sludge and rheology of sludge in wastewater treatment; Various operational units/equipment and process control of wastewater treatment plant.

Download or read book Fundamentals of Water Treatment Unit Processes written by David Hendricks and published by CRC Press. This book was released on 2016-04-19 with total page 930 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carefully designed to balance coverage of theoretical and practical principles, Fundamentals of Water Treatment Unit Processes delineates the principles that support practice, using the unit processes approach as the organizing concept. The author covers principles common to any kind of water treatment, for example, drinking water, municipal wastew

Download or read book Water Quality Engineering written by Mark M. Benjamin and published by John Wiley & Sons. This book was released on 2013-07-01 with total page 906 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explains the fundamental theory and mathematics of water and wastewater treatment processes By carefully explaining both the underlying theory and the underlying mathematics, this text enables readers to fully grasp the fundamentals of physical and chemical treatment processes for water and wastewater. Throughout the book, the authors use detailed examples to illustrate real-world challenges and their solutions, including step-by-step mathematical calculations. Each chapter ends with a set of problems that enable readers to put their knowledge into practice by developing and analyzing complex processes for the removal of soluble and particulate materials in order to ensure the safety of our water supplies. Designed to give readers a deep understanding of how water treatment processes actually work, Water Quality Engineering explores: Application of mass balances in continuous flow systems, enabling readers to understand and predict changes in water quality Processes for removing soluble contaminants from water, including treatment of municipal and industrial wastes Processes for removing particulate materials from water Membrane processes to remove both soluble and particulate materials Following the discussion of mass balances in continuous flow systems in the first part of the book, the authors explain and analyze water treatment processes in subsequent chapters by setting forth the relevant mass balance for the process, reactor geometry, and flow pattern under consideration. With its many examples and problem sets, Water Quality Engineering is recommended as a textbook for graduate courses in physical and chemical treatment processes for water and wastewater. By drawing together the most recent research findings and industry practices, this text is also recommended for professional environmental engineers in search of a contemporary perspective on water and wastewater treatment processes.

Download or read book Physical Chemical Treatment of Water and Wastewater written by Arcadio P. Sincero and published by CRC Press. This book was released on 2002-07-29 with total page 856 pages. Available in PDF, EPUB and Kindle. Book excerpt: The books currently available on this subject contain some elements of physical-chemical treatment of water and wastewater but fall short of giving comprehensive and authoritative coverage. They contain some equations that are not substantiated, offering empirical data based on assumptions that are therefore difficult to comprehend. This text brings together the information previously scattered in several books and adds the knowledge from the author's lectures on wastewater engineering. Physical-Chemical Treatment of Water and Wastewater is not only descriptive but is also analytical in nature. The work covers the physical unit operations and unit processes utilized in the treatment of water and wastewater. Its organization is designed to match the major processes and its approach is mathematical. The authors stress the description and derivation of processes and process parameters in mathematical terms, which can then be generalized into diverse empirical situations. Each chapter includes design equations, definitions of symbols, a glossary of terms, and worked examples. One author is an environmental engineer and a professor for over 12 years and the other has been in the practice of environmental engineering for more than 20 years. They offer a sound analytical mathematical foundation and description of processes. Physical-Chemical Treatment of Water and Wastewater fills a niche as the only dedicated textbook in the area of physical and chemical methods, providing an analytical approach applicable to a range of empirical situations

Download or read book Physical and Chemical Separation in Water and Wastewater Treatment written by Norihito Tambo and published by IWA Publishing. This book was released on 2020-11-15 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based upon half a century of research by the authors, Physical and Chemical Separation in Water and Wastewater Treatment addresses the whole water cycle spectrum, from global hydrological cycle, urban-regional metabolic cycle to individual living and production cycle, with respect to quality control technology based on fundamental science and theories. For every treatment process, basic scientific and environmental physical and chemical natures are explained with respect to those of water and its impurities. Health danger and risks for human beings are also covered. The authors define water qualities on a “Water Quality Matrix” composed of 35 elements. The vertical axis (row), has individual 7digit impurity size from 10-10m (water molecule 3?) to 10-3m (0.1mm sand grains) and in the horizontal axis(column) there are 5 categories of surrogate chemical and biochemical quality indices. The same 35 element matrix is used to correspond with several typical water quality treatments, unit-operation/unit-process, with a suitable characteristic grouping of the elements. The authors then present “the Water Quality Conversion Matrix” or “Water Quality Treatment Matrix”. With respect to typical treatment processes, the basic concept and scientific background are explained and the background of the technologies is clarified. Mechanisms of the process are explained and a kinetic process is formulated. The kinetics are experimentally verified quantitatively with important equilibrium and rate constants. Based on the authors’ research, various new treatment technologies are proposed with high efficiency, high capacity and less energy, and with steady operation ability. This comprehensive reference book is intended for undergraduate and graduate students, and also serves as a guide book for practical engineers and industry and university researchers.

Download or read book Theory and Practice of Water and Wastewater Treatment written by Ronald L. Droste and published by John Wiley & Sons. This book was released on 2018-07-31 with total page 994 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides an excellent balance between theory and applications in the ever-evolving field of water and wastewater treatment Completely updated and expanded, this is the most current and comprehensive textbook available for the areas of water and wastewater treatment, covering the broad spectrum of technologies used in practice today—ranging from commonly used standards to the latest state of the art innovations. The book begins with the fundamentals—applied water chemistry and applied microbiology—and then goes on to cover physical, chemical, and biological unit processes. Both theory and design concepts are developed systematically, combined in a unified way, and are fully supported by comprehensive, illustrative examples. Theory and Practice of Water and Wastewater Treatment, 2nd Edition: Addresses physical/chemical treatment, as well as biological treatment, of water and wastewater Includes a discussion of new technologies, such as membrane processes for water and wastewater treatment, fixed-film biotreatment, and advanced oxidation Provides detailed coverage of the fundamentals: basic applied water chemistry and applied microbiology Fully updates chapters on analysis and constituents in water; microbiology; and disinfection Develops theory and design concepts methodically and combines them in a cohesive manner Includes a new chapter on life cycle analysis (LCA) Theory and Practice of Water and Wastewater Treatment, 2nd Edition is an important text for undergraduate and graduate level courses in water and/or wastewater treatment in Civil, Environmental, and Chemical Engineering.

Download or read book Handbook of Water and Wastewater Treatment Technologies written by Nicholas P Cheremisinoff and published by Butterworth-Heinemann. This book was released on 2001-12-17 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Handbook is an authoritative reference for process and plant engineers, water treatment plant operators and environmental consultants. Practical information is provided for application to the treatment of drinking water and to industrial and municipal wastewater. The author presents material for those concerned with meeting government regulations, reducing or avoiding fines for violations, and making cost-effective decisions while producing a high quality of water via physical, chemical, and thermal techniques. Included in the texts are sidebar discussions, questions for thinking and discussing, recommended resources for the reader, and a comprehensive glossary. Two companion books by Cheremisinoff are available: Handbook of Air Pollution Control Technologies, and Handbook of Solid Waste Management and Waste Minimization Technologies. * Covers the treatment of drinking water as well as industrial and municipal wastewater * Cost-efficiency considerations are incorporated in the discussion of methodologies * Provides practical and broad-based information in one comprehensive source

Download or read book Advanced Biological Physical and Chemical Treatment of Waste Activated Sludge written by Antoine Prandota Trzcinski and published by CRC Press. This book was released on 2018-11-02 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recently, research efforts aiming to improve energy efficiency of wastewater treatment processes for large centralized wastewater treatment plants (WWTPs) have been increasing. Global warming impacts, energy sustainability, and biosolids generation are among several key drivers towards the establishment of energy-efficient WWTPs. WWTPs have been recognized as major contributors of greenhouse gas emissions as these are significant energy consumers in the industrialized world. The quantity of biosolids or excess waste activated sludge produced by WWTP will increase in the future due to population growth and this pose environmental concerns and solid waste disposal issues. Due to limited capacity of landfill sites, more stringent environmental legislation, and air pollution from incineration sites, there is a need to rethink the conventional way of dealing with wastewater and the sludge production that comes with it. This book provides an overview of advanced biological, physical and chemical treatment with the aim of reducing the volume of sewage sludge. Provides a comprehensive list of processes aiming at reducing the volume of sewage sludge and increasing biogas production from waste activated sludge. Includes clear process flowsheet showing how the process is modified compared to the conventional waste activated sludge process. Provides current technologies applied on full scale plant as well as methods still under investigation at laboratory scale. Offers data from pilot scale experience of these processes

Download or read book Applications of New Concepts of Physical Chemical Wastewater Treatment written by W.W. Eckenfelder and published by Elsevier. This book was released on 2013-10-22 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applications of New Concepts of Physical-Chemical Wastewater Treatment deals with novel concepts of physical-chemical wastewater treatment, with particular reference to their engineering applications. Topics covered range from ultrahigh rate filtration of municipal wastewater to the applicability of carbon adsorption in the treatment of petrochemical wastewaters, along with regeneration of activated carbon and dewatering of physical-chemical sludges. Comprised of 31 chapters, this volume begins with a discussion on the use of physical-chemical methods for the treatment of municipal wastes and for direct wastewater treatment. The following chapters focus on the interrelationships between biological treatment and physicochemical treatment; some problems associated with the treatment of sewage by non-biological processes; treatment of wastes generated by metal finishing and engineering industries; and the principles and practice of granular carbon reactivation. The precipitation of calcium phosphate in wastewaters is also considered, together with the use of surface stirrers for ammonia desorption from ponds. This book will be a valuable resource for chemists, engineers, government officials, and environmental policymakers.

Download or read book Water Treatment Unit Processes written by David W. Hendricks and published by CRC Press. This book was released on 2018-10-03 with total page 1266 pages. Available in PDF, EPUB and Kindle. Book excerpt: The unit process approach, common in the field of chemical engineering, was introduced about 1962 to the field of environmental engineering. An understanding of unit processes is the foundation for continued learning and for designing treatment systems. The time is ripe for a new textbook that delineates the role of unit process principles in environmental engineering. Suitable for a two-semester course, Water Treatment Unit Processes: Physical and Chemical provides the grounding in the underlying principles of each unit process that students need in order to link theory to practice. Bridging the gap between scientific principles and engineering practice, the book covers approaches that are common to all unit processes as well as principles that characterize each unit process. Integrating theory into algorithms for practice, Professor Hendricks emphasizes the fundamentals, using simple explanations and avoiding models that are too complex mathematically, allowing students to assimilate principles without getting sidelined by excess calculations. Applications of unit processes principles are illustrated by example problems in each chapter. Student problems are provided at the end of each chapter; the solutions manual can be downloaded from the CRC Press Web site. Excel spreadsheets are integrated into the text as tables designated by a "CD" prefix. Certain spreadsheets illustrate the idea of "scenarios" that emphasize the idea that design solutions depend upon assumptions and the interactions between design variables. The spreadsheets can be downloaded from the CRC web site. The book has been designed so that each unit process topic is self-contained, with sidebars and examples throughout the text. Each chapter has subheadings, so that students can scan the pages and identify important topics with little effort. Problems, references, and a glossary are found at the end of each chapter. Most chapters contain downloadable Excel spreadsheets integrated into the text and appendices with additional information. Appendices at the end of the book provide useful reference material on various topics that support the text. This design allows students at different levels to easily navigate through the book and professors to assign pertinent sections in the order they prefer. The book gives your students an understanding of the broader aspects of one of the core areas of the environmental engineering curriculum and knowledge important for the design of treatment systems.

Download or read book Chemistry of Water Treatment Second Edition written by Samuel D. Faust and published by CRC Press. This book was released on 1998-07-01 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition demonstrates how chemistry influences the design of water treatment plants and how it should influence the design. Historically, water treatment plants have been designed from hydraulic considerations with little regard to chemical aspects. The many chemical reactions used for removal of pollutants from water simply cannot be forced to occur within current designs. This book re-examines this traditional approach in light of today's water quality and treatment. Will current water treatment processes be sufficient to meet future demands or will new processes have to be devised? Chemistry of Water Treatment assesses the chemical and physical efficacies of current processes to meet the demands of the Safe Drinking water Act, providing expert information to persons responsible for the production of potable water into the next century.

Download or read book Basic Water and Wastewater Treatment written by T H Y Tebbutt and published by Elsevier. This book was released on 2013-10-22 with total page 143 pages. Available in PDF, EPUB and Kindle. Book excerpt: Basic Water and Wastewater Treatment discusses the water cycle, flow measurement, physical treatment processes, chemical treatment processes, biological treatment process, and sludge handling and treatment. The book also describes the use of the BASIC computer program to calculate problems involving water pollutants. Flow measurements involve the use of a gauging structure, velocity measurements of a known cross-section, or dilution gauging. To evaluate, in quantitative terms, the effects of a certain pollutant discharged and received by a body of water, the investigator can employ a tool in chemical dilution gauging—the mass balance analysis. Many microorganisms, organic and inorganic compounds degrade in a natural process of self-purification; their decay can be modeled as an exponential function. One standard of water treatment facility or wastewater treatment plant cannot be built to deal with all the various components of water pollution. The book cites relevant standards such as the EC Directive 80/778/EEC: "Quality of Water Intended for Human Consumption" in the EU; the "Safe Drinking Water Act" in the U.S.A.; and the "Guidelines for Drinking Water Quality" issued by the World Health Organization. The book describes water quality parameters, water supply sources, and wastewater collection, including its treatment and disposal.

Download or read book Drinking Water Treatment for Developing Countries written by Aniruddha Bhalchandra Pandit and published by Royal Society of Chemistry. This book was released on 2019-03-06 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drinking water availability and safety is a major challenge faced globally and is highly pronounced in developing countries worldwide. Lack of safe potable water across the globe can be attributed to industrial pollution, climate change and other human activities that result in a spectrum of chemical, physical and biological pollutants entering a water body. Although efforts to solve this problem are well underway worldwide, challenges still exist. This book shines a light on drinking water treatment methods and scale of operation specifically for the developing countries. Covering both conventional and emerging treatment technologies, the authors discuss the removal of chemical, physical and biological pollutants from drinking water, with a focus on developing countries. Conservation by rainwater harvesting, wastewater reuse, and selection criteria of feasible methods are considered in the context of issues relevant to Africa, Asia, Latin America and the Caribbean. With case studies connecting theory to real world matters, showcasing efficiencies and drawbacks, this book is ideal for graduate and postgraduate level course use in engineering departments or for self-study and research.

Download or read book Principles of Water and Wastewater Treatment Processes written by Richard M. Stuetz and published by IWA Publishing. This book was released on 2009-09-30 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Principles of Water and Wastewater Treatment Processes is the third book in the Water and Wastewater Process Technologies Series. The book outlines the principle unit operations that are involved in the separation, degradation and utilisation of organic and inorganic matter during water and wastewater treatment. The module builds on the subjects of chemistry, biology and engineering covered in Process Science and Engineering for Water and Wastewater Treatment (Module 1) and provides a descriptive introduction to unit operations that are further described with design and operational details in later books in the series. The text of Principles of Water and Wastewater Treatment Processes has been divided into the following Units: Water Quality Process Flowsheeting Physical Processes Chemical Processes Sorption Processes Biological Processes Membrane Processes Sludge Treatment Utilisation Odour Management These units have has been designed for individual self-paced study that includes photographs, illustrations and tables and describe the form, function and application of unit operations for the treatment of water and wastewater. Each section of the text gives step-by-step learning in a particular subject, that includes an approximation of how long you will need to spend on that section and provides key points that highlight the principles of the different sections. Each unit includes exercises to help understand the material in the text, self-assessment questions to test your understanding and text references.

Download or read book Bisphenol A Removal from Water and Wastewater written by Magdalena ZIELIŃSKA and published by Springer. This book was released on 2018-05-22 with total page 115 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bringing together key research on bisphenol A (BPA) removal to allow students, and designers and operators of treatment plants to gain knowledge and insight into operating practices, this book presents developments in the technology of wastewater treatment for the removal of micropollutants, using BPA as an example. The difficulties in removing BPA from wastewater in traditional wastewater treatment plants are addressed along with a detailed analysis on integrated technologies for BPA removal; wastewater microorganisms that biodegrade BPA, and physical and chemical methods to support the biodegradation of BPA and its removal from wastewater. Readers are able to gain a general understanding of up-to-date techniques for removing BPA from wastewater, and are able to use the book as a reference for specific questions that they have.