Download or read book Physical and Numerical Simulation of Materials Processing written by Ji Tai Niu and published by Trans Tech Publications Ltd. This book was released on 2008-04-08 with total page 1570 pages. Available in PDF, EPUB and Kindle. Book excerpt: This specialist work comprises 249 peer-reviewed papers on the Physical and Numerical Simulation of Materials Processing.
Download or read book Physical and Numerical Simulation of Material Processing VI written by Ji Tai Niu and published by Trans Tech Publications Ltd. This book was released on 2011-12-06 with total page 1640 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physical and numerical simulations make it possible for materials science to go from experience-based to science-based, and from qualitative to quantitative understanding. Physical simulations, which effectively reveal the underlying principles of a materials structure and property evolution, save significant amounts of time and money. Numerical simulations meanwhile permit descriptions and forms of material processes which are impossible to achieve experimentally. Both types of simulation are naturally gaining acceptance worldwide, and will become a prominent approach used in materials research in the 21st century. Young researchers will therefore benefit greatly from studying this volume.
Download or read book Physical and Numerical Simulation of Materials Processing VII written by L. Pentti Karjalainen and published by Trans Tech Publications Ltd. This book was released on 2013-07-01 with total page 830 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the 7th International Conference on Physical and Numerical Simulation of Materials Processing (ICPNS 13), June 16-19, 2013, Oulu, Finland
Download or read book The 8th International Conference on Physical and Numerical Simulation of Materials Processing written by Zeng Zeng and published by Purdue Scholarly Publishing Services. This book was released on 2016-10-03 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 8th International Conference on Physical and Numerical Simulation of Materials Processing was held on October 14-17, 2016, in Seattle, Washington, USA. About 250 delegates from 40 countries attended. The abstract version of each presentation is included in this volume.
Download or read book Numerical Modeling in Materials Science and Engineering written by Michel Rappaz and published by Springer Science & Business Media. This book was released on 2010-03-11 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computing application to materials science is one of the fastest-growing research areas. This book introduces the concepts and methodologies related to the modeling of the complex phenomena occurring in materials processing. It is intended for undergraduate and graduate students in materials science and engineering, mechanical engineering and physics, and for engineering professionals or researchers.
Download or read book Mathematical and Physical Modeling of Materials Processing Operations written by Olusegun Johnso Ilegbusi and published by CRC Press. This book was released on 1999-07-29 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: The past few decades have brought significant advances in the computational methods and in the experimental techniques used to study transport phenomena in materials processing operations. However, the advances have been made independently and with competition between the two approaches. Mathematical models are easier and less costly to implement, but experiments are essential for verifying theoretical models. In Mathematical and Physical Modeling of Materials Processing Operations, the authors bridge the gap between mathematical modelers and experimentalists. They combine mathematical and physical modeling principles for materials processing operations simulation and use numerous examples to compare theoretical and experimental results. The modeling of transport processes is multi-disciplinary, involving concepts and principles not all of which can be associated with just one field of study. Therefore, the authors have taken care to ensure that the text is self-sustaining through the variety and breadth of topics covered. Beyond the usual topics associated with transport phenomena, the authors also include detailed discussion of numerical methods and implementation of process models, software and hardware selection and application, and representation of auxiliary relationships, including turbulence modeling, chemical kinetics, magnetohydrodynamics, and multi-phase flow. They also provide several correlations for representing the boundary conditions of fluid flow, heat transfer, and mass transfer phenomena. Mathematical and Physical Modeling of Materials Processing Operations is ideal for introducing these tools to materials engineers and researchers. Although the book emphasizes materials, some of the topics will prove interesting and useful to researchers in other fields of chemical and mechanical engineering.
Download or read book CFD Modeling and Simulation in Materials Processing written by Laurentiu Nastac and published by John Wiley & Sons. This book was released on 2012-05-09 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of a symposium sponsored by Association for Iron and Steel Technology and the Process Technology and Modeling Committee of the Extraction and Processing Division and the Solidification Committee of the Materials Processing and Manufacturing Division of TMS (The Minerals, Metals & Materials Society) Held during the TMS 2012 Annual Meeting & Exhibition Orlando, Florida, USA, March 11-15, 2012
Download or read book Modeling in Materials Processing written by Jonathan A. Dantzig and published by Cambridge University Press. This book was released on 2001-11-12 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematical modeling and computer simulation are useful tools for improving materials processing. While courses in materials processing have covered modeling, they have been devoted to one particular class of materials--polymers, metals, or ceramics. This text offers a new approach, presenting an integrated treatment of metallic and non-metallic materials. The authors show that a common base of knowledge--specifically, the fundamentals of heat transfer and fluid mechanics--unifies these seemingly disparate areas. They emphasize understanding basic physical phenomena and knowing how to include them in a model. The book also includes selected numerical methods, a wealth of practical, realistic examples, and homework exercises.
Download or read book Research Directions in Computational Mechanics written by National Research Council and published by National Academies Press. This book was released on 1991-02-01 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational mechanics is a scientific discipline that marries physics, computers, and mathematics to emulate natural physical phenomena. It is a technology that allows scientists to study and predict the performance of various productsâ€"important for research and development in the industrialized world. This book describes current trends and future research directions in computational mechanics in areas where gaps exist in current knowledge and where major advances are crucial to continued technological developments in the United States.
Download or read book Materials Processing Fundamentals 2020 written by Jonghyun Lee and published by Springer. This book was released on 2021-01-09 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume includes contributions on the physical and numerical modeling of materials processing, and covers a range of metals and minerals. Authors present models and results related to the basics of processing such as extraction, joining, separation, and casting. The corresponding fundamentals of mass and heat transport as well as physical and thermodynamics properties are addressed, allowing for a cross-disciplinary vision of the field.
Download or read book Residual Stress Analysis on Welded Joints by Means of Numerical Simulation and Experiments written by Paolo Ferro and published by BoD – Books on Demand. This book was released on 2018-05-16 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ability to quantify residual stresses induced by welding processes through experimentation or numerical simulation has become, today more than ever, of strategic importance in the context of their application to advanced design. This is an ongoing challenge that commenced many years ago. Recent design criteria endeavour to quantify the effect of residual stresses on fatigue strength of welded joints to allow a more efficient use of materials and a greater reliability of welded structures. The aim of the present book is contributing to these aspects of design through a collection of case-studies that illustrate both standard and advanced experimental and numerical methodologies used to assess the residual stress field in welded joints. The work is intended to be of assistance to designers, industrial engineers and academics who want to deepen their knowledge of this challenging topic.
Download or read book CFD Modeling and Simulation in Materials Processing 2018 written by Laurentiu Nastac and published by Springer. This book was released on 2018-01-10 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection presents contributions on computational fluid dynamics (CFD) modeling and simulation of engineering processes from researchers and engineers involved in the modeling of multiscale and multiphase phenomena in material processing systems. The following processes are covered: Additive Manufacturing (Selective Laser Melting and Laser Powder Bed Fusion); Ironmaking and Steelmaking (Ladle Metallurgical Furnace, EAF, Continuous Casting, Blown Converter, Reheating Furnace, Rotary Hearth Furnace); Degassing; High Pressure Gas Atomization of Liquid Metals; Electroslag Remelting; Electrokinetic Deposition; Friction Stir Welding; Quenching; High Pressure Die Casting; Core Injection Molding; Evaporation of Metals; Investment Casting; Electromagnetic Levitation; Ingot Casting; Casting and Solidification with External Field (electromagnetic stirring and ultrasonic cavitation) Interaction and Microstructure Evolution The collection also covers applications of CFD to engineering processes, and demonstrates how CFD can help scientists and engineers to better understand the fundamentals of engineering processes.
Download or read book Materials Processing Fundamentals 2020 written by Jonghyun Lee and published by Springer Nature. This book was released on 2020-01-08 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume includes contributions on the physical and numerical modeling of materials processing, and covers a range of metals and minerals. Authors present models and results related to the basics of processing such as extraction, joining, separation, and casting. The corresponding fundamentals of mass and heat transport as well as physical and thermodynamics properties are addressed, allowing for a cross-disciplinary vision of the field.
Download or read book Modeling and Optimization in Manufacturing written by Catalin I. Pruncu and published by John Wiley & Sons. This book was released on 2021-07-19 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover the state-of-the-art in multiscale modeling and optimization in manufacturing from two leading voices in the field Modeling and Optimization in Manufacturing delivers a comprehensive approach to various manufacturing processes and shows readers how multiscale modeling and optimization processes help improve upon them. The book elaborates on the foundations and applications of computational modeling and optimization processes, as well as recent developments in the field. It offers discussions of manufacturing processes, including forming, machining, casting, joining, coating, and additive manufacturing, and how computer simulations have influenced their development. Examples for each category of manufacturing are provided in the text, and industrial applications are described for the reader. The distinguished authors also provide an insightful perspective on likely future trends and developments in manufacturing modeling and optimization, including the use of large materials databases and machine learning. Readers will also benefit from the inclusion of: A thorough introduction to the origins of manufacturing, the history of traditional and advanced manufacturing, and recent progress in manufacturing An exploration of advanced manufacturing and the environmental impact and significance of manufacturing Practical discussions of the economic importance of advanced manufacturing An examination of the sustainability of advanced manufacturing, and developing and future trends in manufacturing Perfect for materials scientists, mechanical engineers, and process engineers, Modeling and Optimization in Manufacturing will also earn a place in the libraries of engineering scientists in industries seeking a one-stop reference on multiscale modeling and optimization in manufacturing.
Download or read book CFD Modeling and Simulation in Materials Processing 2016 written by Lifeng Zhang and published by John Wiley & Sons. This book was released on 2016-02-08 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection explores computational fluid dynamics (CFD) modeling and simulation of engineering processes, with contributions from researchers and engineers involved in the modeling of multiscale and multiphase phenomena in material processing systems. The papers cover the following processes: Iron and Steelmaking (Tundish, Casting, Converter, Blast Furnace); Microstructure Evolution; Casting with External Field Interaction; and Smelting, Degassing, Ladle Processing, Mechanical Mixing, and Ingot Casting. The collection also covers applications of CFD to engineering processes, and demonstrates how CFD can help scientists and engineers to better understand the fundamentals of engineering processes.
Download or read book The Theory of Laser Materials Processing written by John Dowden and published by Springer. This book was released on 2017-06-16 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: The revised edition of this important reference volume presents an expanded overview of the analytical and numerical approaches employed when exploring and developing modern laser materials processing techniques. The book shows how general principles can be used to obtain insight into laser processes, whether derived from fundamental physical theory or from direct observation of experimental results. The book gives readers an understanding of the strengths and limitations of simple numerical and analytical models that can then be used as the starting-point for more elaborate models of specific practical, theoretical or commercial value. Following an introduction to the mathematical formulation of some relevant classes of physical ideas, the core of the book consists of chapters addressing key applications in detail: cutting, keyhole welding, drilling, arc and hybrid laser-arc welding, hardening, cladding and forming. The second edition includes a new a chapter on glass cutting with lasers, as employed in the display industry. A further addition is a chapter on meta-modelling, whose purpose is to construct fast, simple and reliable models based on appropriate sources of information. It then makes it easy to explore data visually and is a convenient interactive tool for scientists to improve the quality of their models and for developers when designing their processes. As in the first edition, the book ends with an updated introduction to comprehensive numerical simulation. Although the book focuses on laser interactions with materials, many of the principles and methods explored can be applied to thermal modelling in a variety of different fields and at different power levels. It is aimed principally however at academic and industrial researchers and developers in the field of laser technology.
Download or read book Advanced High Strength Steel written by Tapas Kumar Roy and published by Springer. This book was released on 2018-02-09 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume comprises select proceedings of the AHSS 2017 conference. AHSS is an instrumental event in creating a platform for exchanging recent thoughts and results among a selective group of researchers working in the area of steel science and engineering. Twenty two selected papers have been included in this volume. This book will serve as a reference to many practitioners and researchers working in the areas of steel strength, characterization, and applications.
