Download or read book Handbook of Bioceramics and Biocomposites written by Iulian Vasile Antoniac and published by Springer. This book was released on 2016-05-05 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook describes several current trends in the development of bioceramics and biocomposites for clinical use in the repair, remodelling, and regeneration of bone tissue. Comprehensive coverage of these materials allows fundamental aspects of the science and engineering to be seen in close relation to the clinical performance of dental and orthopaedic implants. Bioceramics and biocomposites appear to be the most dynamic area of materials development for both tissue engineering and implantable medical devices. Almost all medical specialties will continue to benefit from these developments, but especially dentistry and orthopaedics. In this Handbook, leading researchers describe the use of bionanomaterials to create new functionalities when interfaced with biological molecules or structures. Also described are technologies for bioceramics and biocomposites processing in order to fabricate medical devices for clinical use. Another important section of the book is dedicated to tissue regeneration with development of new matrices. A targeted or personalized treatment device reduces drug consumption and treatment expenses, resulting in benefits to the patient and cost reductions for public health systems. This authoritative reference on the state-of-the-art in the development and use of bioceramics and biocomposites can also serve as the basis of instructional course lectures for audiences ranging from advanced undergraduate students to post-graduates in materials science and engineering and biomedical engineering.
Download or read book Dental Composite Materials for Direct Restorations written by Vesna Miletic and published by Springer. This book was released on 2017-11-25 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers both basic scientific and clinically relevant aspects of dental composite materials with a view to meeting the needs of researchers and practitioners. Following an introduction on their development, the composition of contemporary composites is analyzed. A chapter on polymerization explains the setting reactions and light sources available for light-cured composites. The quality of monomer-to-polymer conversion is a key factor for material properties. Polymerization shrinkage along with the associated stress remains among the most challenging issues regarding composite restorations. A new classification of dental composites is proposed to offer more clinically relevant ways of differentiating between commercially available materials. A review of specific types of composites provides an insight into their key issues. The potential biological issues of dental composites are reviewed in chapters on elution of leachable substances and cariogenicity of resin monomers. Clinical sections focus on material placement, finishing procedures, and the esthetics and clinical longevity of composite restorations. Bonding to tooth tissues is addressed in a separate chapter, as is the efficiency of various composite repair methods. The final chapter discusses future perspectives on dental composite materials.
Download or read book Dental Materials and Their Selection written by William Joseph O'Brien and published by Quintessence Publishing (IL). This book was released on 1997 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1. A Comparison of Metals, Ceramics, and Polymers. -- 2. Physical Properties. -- 3. Color and Appearance. -- 4. Surface Phenomena and Adhesion to Tooth Structure. -- 5. Gypsum Products. -- 6. Polymers and Polymerizations: Denture Base Polymers. -- 7. Polymeric Restorative Materials: Composites and Sealants. -- 8. Abrasion, Polishing, and Bleaching. -- 9. Impression Materials. -- 10. Waxes. -- 11. Dental Cements. -- 12. Structure and Properties of Metals and Alloys. -- 13. Dental Amalgams. -- 14. Direct Gold Filling Materials. -- 15. Precious Metal Casting Alloys. -- 16. Alloys for Porcelain-Fused-to-Metal Restorations. -- 17. Casting. -- 18. High-Temperature Investments. -- 19. Base Metal Casting Alloys. -- 20. Orthodontic Wires. -- 21. Dental Porcelain. -- 22. Soldering, Welding, and Electroplating. -- 23. Dental Implant Materials.
Download or read book Craig s Restorative Dental Materials written by John M. Powers and published by Mosby. This book was released on 2006 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting a comprehensive exploration of restorative dental materials, this book provides the information readers need to know to correctly use dental materials in the clinic and dental laboratory. Ranging from fundamental concepts to advanced skills, it also provides the scientific basis for technical procedures and manipulation of materials.
Download or read book Operative Dentistry written by and published by . This book was released on 2005 with total page 830 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book SPE ANTEC 2001 Proceedings written by Spe and published by CRC Press. This book was released on 2001-05-07 with total page 1408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Conference proceedings from 'Antec 2001' held on 6-10 May 2001 in Dallas, Texas. This includes the Volume III topic of Special Areas Color and Appearance Division.
Download or read book Materials for the Direct Restoration of Teeth written by John Nicholson and published by Woodhead Publishing. This book was released on 2016-09-01 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials for the Direct Restoration of Teeth focuses on the important role teeth play in our lives and how biomaterials scientists are ensuring that new dental materials are functional and esthetic. As research in the field is shifting away from traditional materials like metal, and towards more advanced materials, such as resins and ceramics, this book on the subject of modern materials for the direct repair of teeth provides readers with a comprehensive reference. The most pertinent modern dental materials and their properties and applications for the direct restoration of teeth are presented, along with case examples and guidance notes making this book an essential companion for materials scientists and clinicians. - Provides comprehensive coverage of conventional and modern materials for direct restoration of teeth - Includes guidance notes and case examples to support dental clinicians in decision-making - Authored by a scientist and a clinician, the book provides a balanced and complete treatise of the subject
Download or read book Tooth colored Restoratives written by Harry F. Albers and published by PMPH-USA. This book was released on 2002 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explains the nature, benefits, and limitations of resins and ionomers. Products are classified by material type and clarified as to their use. Text is supported by more than 700 dentists' involvement in study group evaluations of techniques and results. CD-ROM includes complete text and illustrations in fully searchable PDF files. Previous edition: c1998.
Download or read book Antec 2001 written by and published by U of Nebraska Press. This book was released on with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Accelerated Aging written by Robert L. Feller and published by Getty Publications. This book was released on 1995-03-02 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Accelerated Aging: Photochemical and Thermal Aspects represents the culmination of more than 40 years of research by noted scientist Robert L. Feller. The book focuses on the long-term performance of materials such as wool, dyes, and organic compounds; their resistance to change when exposed to environmental factors such as oxygen, ozone, moisture, heat, and light; and their physical durability with handling and use over time. Processes of deterioration are discussed based on speeded-up laboratory studies designed to clarify the chemical reactions involved and their physical consequences.
Download or read book Restoration of Root Canal Treated Teeth written by Jorge Perdigão and published by Springer. This book was released on 2015-10-02 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a comprehensive and up-to-date overview of the restoration of teeth retained through root canal treatment, from the perspective of adhesive dentistry. The challenge of adhesion to root dentin is first explained and guidance provided on assessment of the restorability of endodontically treated teeth. The types of prefabricated passive post are then described in detail. The advantages and disadvantages of each type are outlined, with identification of the factors that influence post selection. Further topics include the ferrule effect, evidence‐based clinical applications of fiber posts and new methods to lute fiber posts to the root canal without dentin adhesives. In addition, frequent myths are identified and dispelled. All aspects are illustrated with clinical and laboratory images, diagrams and high-resolution electron microscopy photographs.
Download or read book Oral Biofilms and Modern Dental Materials written by Andrei Cristian Ionescu and published by Springer Nature. This book was released on 2021-04-01 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an up-to-date perspective on oral biofilms and dental materials, equipping readers with a sound understanding of their mutual interactions. Experts from across the world comprehensively describe the main strategies that can be followed when designing modern bioactive and biomimetic dental materials, bearing in mind the goal of reducing the occurrence of pathological conditions such as secondary caries and peri-implantitis. The background to the book is the rapid expansion in the use of nanotechnologies and modern techniques to achieve levels of performance of dental materials that were unthinkable even a few years ago. Whereas conventionally dental materials have been regarded as inert, an important paradigm shift is underway: now, these materials are being conceived as bioactive and biomimetic. Modern dental materials can produce a response by interacting positively both with the host and with the biofilm permanently colonizing hard and soft tissues of the oral cavity. These materials increasingly mimic the behavior of the tissues that they are replacing. In documenting the latest knowledge in the field, this book will be of value for both scientists in the fields of nanotechnology, biofilms and dental materials and interested clinicians.
Download or read book Biocompatibility of Dental Materials written by Gottfried Schmalz and published by Springer Science & Business Media. This book was released on 2008-10-10 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive and scientifically based overview of the biocompatibility of dental materials. Up-to-date concepts of biocompatibility assessment are presented, as well as information on almost all material groups used in daily dentistry practice. Furthermore, special topics of clinical relevance (e.g,, environmental and occupational hazards and the diagnosis of adverse effects) are covered. The book will: improve the reader’s ability to critically analyze information provided by manufacturers supply a better understanding of the biocompatibility of single material groups, which will help the reader choose the most appropriate materials for any given patient and thus prevent adverse effects from developing provide insights on how to conduct objective, matter-of-fact discussions with patients about the materials to be used in dental procedures advise readers, through the use of well-documented concepts, on how to treat patients who claim adverse effects from dental materials feature clinical photographs that will serve as a reference when analyzing clinical symptoms, such as oral mucosa reactions.
Download or read book Extra Coronal Restorations written by Robert Wassell and published by Springer. This book was released on 2018-07-31 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a state of the art clinical guide to contemporary materials and techniques for the restoration of individual teeth and implants. It fully reflects the important developments in the field over the past 15 years, including in particular the shift away from wholesale use of crowns towards adhesive dentistry and less invasive extra-coronal restorations. The book opens by considering the principles and evidence base relating to the longevity of restorations of teeth and implants. Importantly, it explains how to ensure “a healthy start” and manage future risks. Material choice and aesthetic issues are then discussed, before all aspects of the planning and provision of extra-coronal restorations are examined in depth. The coverage also includes the adaptation of crowns to existing partial dentures. In line with modern dental education, each chapter begins with clinically relevant learning objectives, and helpful clinical tips are highlighted. The book will be of value for senior dental undergraduates, postgraduates, and practicing dentists and its scientific content will be of interest to dental academics.
Download or read book Materials Design and Applications written by Lucas F. M. da Silva and published by Springer. This book was released on 2017-03-11 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume features fundamental research and applications in the field of the design and application of engineering materials, predominantly within the context of mechanical engineering applications. This includes a wide range of materials engineering and technology, including metals, e.g., polymers, composites, and ceramics. Advanced applications would include manufacturing in the new or newer materials, testing methods, multi-scale experimental and computational aspects. This book features fundamental research and applications in the design of engineering materials, predominantly within the context of mechanical engineering applications such as automobile, railway, marine, aerospace, biomedical, pressure vessel technology, and turbine technology. It covers a wide range of materials, including metals, polymers, composites, and ceramics. Advanced applications include the manufacturing of new materials, testing methods, multi-scale experimental and computational aspects. p>
Download or read book Metal Ceramic and Polymeric Composites for Various Uses written by John Cuppoletti and published by BoD – Books on Demand. This book was released on 2011-07-20 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite materials, often shortened to composites, are engineered or naturally occurring materials made from two or more constituent materials with significantly different physical or chemical properties which remain separate and distinct at the macroscopic or microscopic scale within the finished structure. The aim of this book is to provide comprehensive reference and text on composite materials and structures. This book will cover aspects of design, production, manufacturing, exploitation and maintenance of composite materials. The scope of the book covers scientific, technological and practical concepts concerning research, development and realization of composites.
Download or read book Interface Oral Health Science 2016 written by Keiichi Sasaki and published by . This book was released on 2020-10-08 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume broadens understanding of dentistry and promotes interdisciplinary research across a wide range of related fields, based on the symposium entitled "Innovative Research for Biosis-Abiosis Intelligent Interface 2016". It aims to create highly functional and autonomic intelligent interface by combining highly functional interface science with the technology of an evaluation and a control at the interface, with the various topics of biomaterials, innovation for oral science and application, regenerative oral science, and medical engineering. Since 2002, the Tohoku University Graduate School of Dentistry has hosted "Interface Oral Health Science" several times as the main theme of dental research in the twenty-first century, and this is the sixth proceedings of the symposiums following the ones in 2005, 2007, 2009, 2011, and 2014.This book benefits not only dental scientists but also other health scientists including medical physicians and pharmacologists, material scientists, engineers, and any scientist who is involved in variety of disciplines. This work was published by Saint Philip Street Press pursuant to a Creative Commons license permitting commercial use. All rights not granted by the work's license are retained by the author or authors.
