Download or read book Physical and Chemical Separation in Water and Wastewater Treatment written by Norihito Tambo and published by IWA Publishing. This book was released on 2020-11-15 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based upon half a century of research by the authors, Physical and Chemical Separation in Water and Wastewater Treatment addresses the whole water cycle spectrum, from global hydrological cycle, urban-regional metabolic cycle to individual living and production cycle, with respect to quality control technology based on fundamental science and theories. For every treatment process, basic scientific and environmental physical and chemical natures are explained with respect to those of water and its impurities. Health danger and risks for human beings are also covered. The authors define water qualities on a “Water Quality Matrix” composed of 35 elements. The vertical axis (row), has individual 7digit impurity size from 10-10m (water molecule 3?) to 10-3m (0.1mm sand grains) and in the horizontal axis(column) there are 5 categories of surrogate chemical and biochemical quality indices. The same 35 element matrix is used to correspond with several typical water quality treatments, unit-operation/unit-process, with a suitable characteristic grouping of the elements. The authors then present “the Water Quality Conversion Matrix” or “Water Quality Treatment Matrix”. With respect to typical treatment processes, the basic concept and scientific background are explained and the background of the technologies is clarified. Mechanisms of the process are explained and a kinetic process is formulated. The kinetics are experimentally verified quantitatively with important equilibrium and rate constants. Based on the authors’ research, various new treatment technologies are proposed with high efficiency, high capacity and less energy, and with steady operation ability. This comprehensive reference book is intended for undergraduate and graduate students, and also serves as a guide book for practical engineers and industry and university researchers.

Download or read book Physical and Chemical Separation in Water and Wastewater Treatment written by Norihito Tambo and published by IWA Publishing. This book was released on 2020-05-15 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based upon half a century of research by the authors, Physical and Chemical Separation in Water and Wastewater Treatment addresses the whole water cycle spectrum, from global hydrological cycle, urban-regional metabolic cycle to individual living and production cycle, with respect to quality control technology based on fundamental science and theories. For every treatment process, basic scientific and environmental physical and chemical natures are explained with respect to those of water and its impurities. Health danger and risks for human beings are also covered. The authors define water qualities on a “Water Quality Matrix” composed of 35 elements. The vertical axis (row), has individual 7digit impurity size from 10-10m (water molecule 3?) to 10-3m (0.1mm sand grains) and in the horizontal axis(column) there are 5 categories of surrogate chemical and biochemical quality indices. The same 35 element matrix is used to correspond with several typical water quality treatments, unit-operation/unit-process, with a suitable characteristic grouping of the elements. The authors then present “the Water Quality Conversion Matrix” or “Water Quality Treatment Matrix”. With respect to typical treatment processes, the basic concept and scientific background are explained and the background of the technologies is clarified. Mechanisms of the process are explained and a kinetic process is formulated. The kinetics are experimentally verified quantitatively with important equilibrium and rate constants. Based on the authors’ research, various new treatment technologies are proposed with high efficiency, high capacity and less energy, and with steady operation ability. This comprehensive reference book is intended for undergraduate and graduate students, and also serves as a guide book for practical engineers and industry and university researchers.

Download or read book Physical and Chemical Separation in Water and Wastewater Treatment written by Koichi Ogasawara (author) Norihito Tambo (author) and published by . This book was released on 1901 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fundamentals of Water Treatment Unit Processes written by David Hendricks and published by CRC Press. This book was released on 2016-04-19 with total page 930 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carefully designed to balance coverage of theoretical and practical principles, Fundamentals of Water Treatment Unit Processes delineates the principles that support practice, using the unit processes approach as the organizing concept. The author covers principles common to any kind of water treatment, for example, drinking water, municipal wastew

Download or read book Physical Chemical and Biological Treatment Processes for Water and Wastewater written by Tushar Kanti Sen and published by Nova Science Publishers. This book was released on 2015-09 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Water pollution occurs when toxic pollutants of varying kinds (organic, inorganic, radioactive and so on) are directly or indirectly discharged into water bodies without adequate treatment to remove such potential pollutants. Today's sources of these potential pollutants, which cause high deterioration of freshwater quality, are city sewage and industrial waste discharge, human agricultural practices, industrial waste disposal practices, mining activities, civil and structural work activities and obviously natural contamination with climate change. When our water is polluted, it is not only devastating to the environment but also to human health. Therefore, development of water and wastewater treatment processes to alleviate water pollution has been a challenging and demanding task for engineers, scientists and researchers. Perhaps this is even more challenging for underdeveloped and developing countries, where water and wastewater treatment facilities, knowledge and infrastructure are limited. Water and wastewater treatment processes are broad and often multidisciplinary in nature, comprising a mixture of research areas including physical, chemical and biological methods to remove or transform various potential pollutants. This is in hopes to achieve acceptable water quality and satisfy governmental and environmental protection agencies' laws and regulations. With these objectives, this book has been written in order to provide various research results and compilation and up-to-date development on the current states of knowledge and techniques in the broad field of water and wastewater treatment processes. Basically, this book will give a comprehensive understanding and advancement and application of various physical, chemical and biological treatment methods in the reduction of potential pollutants (inorganics/organics) from water and wastewater. There are a total 18 book chapters contributed by large number of expert authors around the world, covering the following main research areas: Physical, chemical and biological water treatment processes such as adsorption, biosorption, coagulation/flocculation, electrocoagulation, denitration, membrane filtration/separation, photo-catalytic reduction, advanced oxidation, nutrients removal by struvite crystallisation and nanotechnology; Physical, chemical and biological methods for municipal wastewater and industrial wastewater treatment plants such as primary-secondary sludge treatments, anaerobic digestions, aerobic treatment, activated sludge processes, dewaterability by flocculants, pre-treatments of sludge and rheology of sludge in wastewater treatment; Various operational units/equipment and process control of wastewater treatment plant.

Download or read book Handbook of Water and Wastewater Treatment Technologies written by Nicholas P Cheremisinoff and published by Butterworth-Heinemann. This book was released on 2001-12-17 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Handbook is an authoritative reference for process and plant engineers, water treatment plant operators and environmental consultants. Practical information is provided for application to the treatment of drinking water and to industrial and municipal wastewater. The author presents material for those concerned with meeting government regulations, reducing or avoiding fines for violations, and making cost-effective decisions while producing a high quality of water via physical, chemical, and thermal techniques. Included in the texts are sidebar discussions, questions for thinking and discussing, recommended resources for the reader, and a comprehensive glossary. Two companion books by Cheremisinoff are available: Handbook of Air Pollution Control Technologies, and Handbook of Solid Waste Management and Waste Minimization Technologies. * Covers the treatment of drinking water as well as industrial and municipal wastewater * Cost-efficiency considerations are incorporated in the discussion of methodologies * Provides practical and broad-based information in one comprehensive source

Download or read book Advances in Oil Water Separation written by Papita Das and published by Elsevier. This book was released on 2022-02-16 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Oil-Water Separation: A Complete Guide for Physical, Chemical, and Biochemical Processes discusses a broad variety of chemical, physical and biochemical processes, including skimming, membrane separation, adsorption, onsite chemical reactions, burning and usage of suitable microbial strains for onsite degradation of oil. It critically reviews all current developments in oil-water separation processes and technologies, identifies gaps and illuminates the scope for future research and development in the field. This book provides researchers, engineers and environmental professionals working in oil recovery and storage with solutions for disposal of waste oil and separation of oil from water in a sustainable, environmentally-friendly way. As the book provides a complete state-of-art overview on oil-water separation technologies, it will also ease literature searches on oil-water separation technologies. Provides a comprehensive overview of state-of-the-art developments in oil-water separation methods Discusses the pros and cons of established processes Guides the reader towards the selection of the right technique/process for each oil-water separation problem Presents current developments on adsorbent based oil-water separation

Download or read book Principles of Water and Wastewater Treatment Processes written by Richard M. Stuetz and published by IWA Publishing. This book was released on 2009-09-30 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Principles of Water and Wastewater Treatment Processes is the third book in the Water and Wastewater Process Technologies Series. The book outlines the principle unit operations that are involved in the separation, degradation and utilisation of organic and inorganic matter during water and wastewater treatment. The module builds on the subjects of chemistry, biology and engineering covered in Process Science and Engineering for Water and Wastewater Treatment (Module 1) and provides a descriptive introduction to unit operations that are further described with design and operational details in later books in the series. The text of Principles of Water and Wastewater Treatment Processes has been divided into the following Units: Water Quality Process Flowsheeting Physical Processes Chemical Processes Sorption Processes Biological Processes Membrane Processes Sludge Treatment Utilisation Odour Management These units have has been designed for individual self-paced study that includes photographs, illustrations and tables and describe the form, function and application of unit operations for the treatment of water and wastewater. Each section of the text gives step-by-step learning in a particular subject, that includes an approximation of how long you will need to spend on that section and provides key points that highlight the principles of the different sections. Each unit includes exercises to help understand the material in the text, self-assessment questions to test your understanding and text references.

Download or read book Water Quality Engineering written by Mark M. Benjamin and published by John Wiley & Sons. This book was released on 2013-07-01 with total page 906 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explains the fundamental theory and mathematics of water and wastewater treatment processes By carefully explaining both the underlying theory and the underlying mathematics, this text enables readers to fully grasp the fundamentals of physical and chemical treatment processes for water and wastewater. Throughout the book, the authors use detailed examples to illustrate real-world challenges and their solutions, including step-by-step mathematical calculations. Each chapter ends with a set of problems that enable readers to put their knowledge into practice by developing and analyzing complex processes for the removal of soluble and particulate materials in order to ensure the safety of our water supplies. Designed to give readers a deep understanding of how water treatment processes actually work, Water Quality Engineering explores: Application of mass balances in continuous flow systems, enabling readers to understand and predict changes in water quality Processes for removing soluble contaminants from water, including treatment of municipal and industrial wastes Processes for removing particulate materials from water Membrane processes to remove both soluble and particulate materials Following the discussion of mass balances in continuous flow systems in the first part of the book, the authors explain and analyze water treatment processes in subsequent chapters by setting forth the relevant mass balance for the process, reactor geometry, and flow pattern under consideration. With its many examples and problem sets, Water Quality Engineering is recommended as a textbook for graduate courses in physical and chemical treatment processes for water and wastewater. By drawing together the most recent research findings and industry practices, this text is also recommended for professional environmental engineers in search of a contemporary perspective on water and wastewater treatment processes.

Download or read book Water Treatment Unit Processes written by David W. Hendricks and published by CRC Press. This book was released on 2018-10-03 with total page 1266 pages. Available in PDF, EPUB and Kindle. Book excerpt: The unit process approach, common in the field of chemical engineering, was introduced about 1962 to the field of environmental engineering. An understanding of unit processes is the foundation for continued learning and for designing treatment systems. The time is ripe for a new textbook that delineates the role of unit process principles in environmental engineering. Suitable for a two-semester course, Water Treatment Unit Processes: Physical and Chemical provides the grounding in the underlying principles of each unit process that students need in order to link theory to practice. Bridging the gap between scientific principles and engineering practice, the book covers approaches that are common to all unit processes as well as principles that characterize each unit process. Integrating theory into algorithms for practice, Professor Hendricks emphasizes the fundamentals, using simple explanations and avoiding models that are too complex mathematically, allowing students to assimilate principles without getting sidelined by excess calculations. Applications of unit processes principles are illustrated by example problems in each chapter. Student problems are provided at the end of each chapter; the solutions manual can be downloaded from the CRC Press Web site. Excel spreadsheets are integrated into the text as tables designated by a "CD" prefix. Certain spreadsheets illustrate the idea of "scenarios" that emphasize the idea that design solutions depend upon assumptions and the interactions between design variables. The spreadsheets can be downloaded from the CRC web site. The book has been designed so that each unit process topic is self-contained, with sidebars and examples throughout the text. Each chapter has subheadings, so that students can scan the pages and identify important topics with little effort. Problems, references, and a glossary are found at the end of each chapter. Most chapters contain downloadable Excel spreadsheets integrated into the text and appendices with additional information. Appendices at the end of the book provide useful reference material on various topics that support the text. This design allows students at different levels to easily navigate through the book and professors to assign pertinent sections in the order they prefer. The book gives your students an understanding of the broader aspects of one of the core areas of the environmental engineering curriculum and knowledge important for the design of treatment systems.

Download or read book Wastewater Treatment written by D. G. Rao and published by CRC Press. This book was released on 2012-07-05 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to the heterogeneous nature of water streams from diverse domestic and industrial sources, and the equally diverse nature of pollutants that can be physical, chemical, and biological in nature, their treatment methods also must be varied in nature. Responding to this complex situation, Wastewater Treatment: Advanced Processes and Technologies presents important concepts, technologies, and issues, essentially distilling the information into actionable treatment methods for various types of pollutants. Edited by experts in the field, the book explores recent advances in wastewater treatment by various technologies such as chemical methods, biochemical methods, membrane separation techniques, and by application of Fenton and solar photo Fenton methods. It emphasizes new technologies that produce clean water and energy from the wastewater treatment process and addresses sustainable water reclamation, biomembrane treatment processes and advanced oxidation processes for wastewater treatment. The editors and chapter authors judiciously blend coverage of treatment processes and technologies, making the diverse subject matter as comprehensible as possible. They tackle the difficulties of covering the gamut of advanced processes and technologies available concisely, without losing the rigor and details required for the information to be useful and applicable. Equations, figures, photographs, tables, case studies, examples, and references support the information provided in the text. These features combine to make the book an authoritative resource and practical tool for resolving wastewater treatment issues.

Download or read book Separation Technologies for the Industries of the Future written by National Research Council and published by National Academies Press. This book was released on 1999-02-08 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: Separation processesâ€"or processes that use physical, chemical, or electrical forces to isolate or concentrate selected constituents of a mixtureâ€"are essential to the chemical, petroleum refining, and materials processing industries. In this volume, an expert panel reviews the separation process needs of seven industries and identifies technologies that hold promise for meeting these needs, as well as key technologies that could enable separations. In addition, the book recommends criteria for the selection of separations research projects for the Department of Energy's Office of Industrial Technology.

Download or read book Coagulation and Flocculation in Water and Wastewater Treatment written by John Bratby and published by IWA Publishing. This book was released on 2006-10-15 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coagulation and Flocculation in Water and Wastewater Treatment provides a comprehensive account of coagulation and flocculation techniques and technologies in a single volume covering theoretical principles to practical applications. Thoroughly revised and updated since the 1st Edition it has been progressively modified and increased in scope to cater for the requirements of practitioners involved with water and wastewater treatment. A thorough gamut of treatment scenarios is attempted, including turbidity, color and organics removal, including the technical aspects of enhanced coagulation. The effects of temperature and ionic content are described as well as the removal of specific substances such as arsenic and phosphorus. Chemical phosphorus removal is dealt with in detail, Rapid mixing for efficient coagulant utilization, and flocculation are dealt with in specific chapters. Water treatment plant waste sludge disposal is dealt with in considerable detail, in an Appendix devoted to this subject. Invaluble for water scientists, engineers and students of this field, Coagulation and Flocculation in Water and Wastewater Treatment is a convenient reference handbook in the form of numerous examples and appended information.

Download or read book Theory and Practice of Water and Wastewater Treatment written by Ronald L. Droste and published by John Wiley & Sons. This book was released on 2018-07-31 with total page 994 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides an excellent balance between theory and applications in the ever-evolving field of water and wastewater treatment Completely updated and expanded, this is the most current and comprehensive textbook available for the areas of water and wastewater treatment, covering the broad spectrum of technologies used in practice today—ranging from commonly used standards to the latest state of the art innovations. The book begins with the fundamentals—applied water chemistry and applied microbiology—and then goes on to cover physical, chemical, and biological unit processes. Both theory and design concepts are developed systematically, combined in a unified way, and are fully supported by comprehensive, illustrative examples. Theory and Practice of Water and Wastewater Treatment, 2nd Edition: Addresses physical/chemical treatment, as well as biological treatment, of water and wastewater Includes a discussion of new technologies, such as membrane processes for water and wastewater treatment, fixed-film biotreatment, and advanced oxidation Provides detailed coverage of the fundamentals: basic applied water chemistry and applied microbiology Fully updates chapters on analysis and constituents in water; microbiology; and disinfection Develops theory and design concepts methodically and combines them in a cohesive manner Includes a new chapter on life cycle analysis (LCA) Theory and Practice of Water and Wastewater Treatment, 2nd Edition is an important text for undergraduate and graduate level courses in water and/or wastewater treatment in Civil, Environmental, and Chemical Engineering.

Download or read book Multidisciplinary Advances in Efficient Separation Processes written by Irina Chernyshova and published by . This book was released on 2021-04-30 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Colloidal and interfacial separation processes factor heavily in key industrial applications, but they are energy- and water-intensive. Making these processes more efficient requires advancing our understanding of basic colloidal and interfacial phenomena. This work explores recent advances inseparation methods, including those based on liquids, membranes, adsorption, ion exchange, microbiology, agricultural byproducts, and electrochemistry.Multidisciplinary Advances in Efficient Separation Processes explores new developments in wastewater treatment, managing micropollutants and microplastics, extraction of rare-earth elements and heavy metals, water desalination, and oil spill remediation. These methods are increasingly important foraddressing challenges in providing potable water supplies, recovering and recycling valuable metals and minerals, and pollution prevention and mitigation.

Download or read book Environmental Chemistry Eighth Edition written by Stanley E. Manahan and published by CRC Press. This book was released on 2004-08-26 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental Chemistry, Eighth Edition builds on the same organizational structure validated in previous editions tosystematically develop the principles, tools, and techniques of environmental chemistry to provide students and professionals with a clear understanding of the science and its applications. Revised and updated since the publication of the best-selling Seventh Edition, this text continues to emphasize the major concepts essential to the practice of environmental science, technology, and chemistry while introducing the newest innovations to the field. The author provides clear explanations to important concepts such as the anthrosphere, industrial ecosystems, geochemistry, aquatic chemistry, and atmospheric chemistry, including the study of ozone-depleting chlorofluorocarbons. The subject of industrial chemistry and energy resources is supported by pertinent topics in recycling and hazardous waste. Several chapters review environmental biochemistry and toxicology, and the final chapters describe analytical methods for measuring chemical and biological waste. New features in this edition include: enhanced coverage of chemical fate and transport; industrial ecology, particularly how it is integrated with green chemistry; conservation principles and recent accomplishments in sustainable chemical science and technology; a new chapter addressing terrorism and threats to the environment; and the use of real world examples.

Download or read book Membrane based Hybrid Processes for Wastewater Treatment written by Maulin P Shah and published by Elsevier. This book was released on 2021-05-27 with total page 727 pages. Available in PDF, EPUB and Kindle. Book excerpt: Membrane-Based Hybrid Processes for Wastewater Treatment analyzes and discusses the potential of membrane-based hybrid processes for the treatment of complex industrial wastewater, the recovery of valuable compounds, and water reutilization. In addition, recent and future trends in membrane technology are highlighted. Industrial wastewater contains a large variety of compounds, such as heavy metals, salts and nutrients, which makes its treatment challenging. Thus, the use of conventional water treatment methods is not always effective. Membrane-based hybrid processes have emerged as a promising technology to treat complex industrial wastewater. Discusses the properties, mechanisms, advantages, limitations and promising solutions of different types of membrane technologies Addresses the optimization of process parameters Describes the performance of different membranes Presents the potential of Nanotechnology to improve the treatment efficiency of wastewater treatment plants (WWTPs) Covers the application of membrane and membrane-based hybrid treatment technologies for wastewater treatment Includes forward osmosis, electrodialysis, and diffusion dialysis Considers hybrid membrane systems expanded to cover zero liquid discharge, salt recovery, and removal of trace contaminants