Download or read book Photonic Microsystems written by Olav Solgaard and published by Springer Science & Business Media. This book was released on 2009-04-05 with total page 641 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes Microelectromechanical systems (MEMS) technology and demonstrates how MEMS allow miniaturization, parallel fabrication, and efficient packaging of optics, as well as integration of optics and electronics. The book shows how the characteristics of MEMS enable practical implementations of a variety of applications, including projection displays, fiber switches, interferometers, and spectrometers. The authors conclude with an up-to-date discussion of the need for the combination of MEMS and Photonic crystals.
Download or read book Diffractive Optics and Optical Microsystems written by S. Martellucci and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the 20th Course of the International School of Quantum Electronics held in Erice, Italy, November 14-24, 1996
Download or read book Optical Nano and Microsystems for Bioanalytics written by Wolfgang Fritzsche and published by Springer Science & Business Media. This book was released on 2012-02-04 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the state of the art in the field of bioanalytical nano- and microsystems with optical functionality. In 12 chapters distinguished scientists and leaders in their respective fields show how various optical technologies have been miniaturized and integrated over the last few decades in order to be combined with nano- and microsystems for applications in the life sciences. The main detection and characterization technologies are introduced, and examples of the superiority of these integrated approaches compared to traditional ones are provided. Examples from e.g. the fields of optical waveguides, integrated interferometers, surface plasmon resonance or Raman spectroscopy are introduced and discussed, and it is shown how these approaches have led to novel functionalities and thereby novel applications.
Download or read book Tunable Micro optics written by Hans Zappe and published by Cambridge University Press. This book was released on 2015-12-17 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first comprehensive survey of state-of-the-art tunable micro-optics, covering advances in materials, components and systems.
Download or read book Fundamentals of Micro Optics written by Hans Zappe and published by Cambridge University Press. This book was released on 2010-09-30 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: From optical fundamentals to advanced applications, this comprehensive guide to micro-optics covers all the key areas for those who need an in-depth introduction to micro-optic devices, technologies, and applications. Topics covered range from basic optics, optical materials, refraction, and diffraction, to micro-mirrors, micro-lenses, diffractive optics, optoelectronics, and fabrication. Advanced topics, such as tunable and nano-optics, are also discussed. Real-world case studies and numerous worked examples are provided throughout, making complex concepts easier to follow, whilst an extensive bibliography provides a valuable resource for further study. With exercises provided at the end of each chapter to aid and test understanding, this is an ideal textbook for graduate and advanced undergraduate students taking courses in optics, photonics, micro-optics, microsystems, and MEMs. It is also a useful self-study guide for research engineers working on optics development.
Download or read book Optical Imaging and Metrology written by Wolfgang Osten and published by John Wiley & Sons. This book was released on 2012-09-10 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive review of the state of the art and advances in the field, while also outlining the future potential and development trends of optical imaging and optical metrology, an area of fast growth with numerous applications in nanotechnology and nanophysics. Written by the world's leading experts in the field, it fills the gap in the current literature by bridging the fields of optical imaging and metrology, and is the only up-to-date resource in terms of fundamental knowledge, basic concepts, methodologies, applications, and development trends.
Download or read book Materials for Mechanical and Optical Microsystems Volume 444 written by Michael L. Reed and published by . This book was released on 1997-03-30 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: A selection of 33 reviewed papers explore the materials aspects of microsystems, especially those involving mechanical, optical, and thermal components. The topics include technology for micro- assembling, selective electroless copper metallization of epoxy substrates, an improved auto-adhesion measurement method for micro-machines polysilicon beams, patterned sol-gel structures by micro-molding in capillaries, the experimental analysis of the process of anodic bonding using an evaporated glass layer, the effect of inorganic thin film material processing and properties on stress in silicon piezoresistive pressure sensors, and photoconductivity in vacuum-deposited films of silicon-based polymers. Annotation copyrighted by Book News, Inc., Portland, OR
Download or read book Optical Nano and Micro Actuator Technology written by George K. Knopf and published by CRC Press. This book was released on 2017-12-19 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: In Optical Nano and Micro Actuator Technology, leading engineers, material scientists, chemists, physicists, laser scientists, and manufacturing specialists offer an in-depth, wide-ranging look at the fundamental and unique characteristics of light-driven optical actuators. They discuss how light can initiate physical movement and control a variety of mechanisms that perform mechanical work at the micro- and nanoscale. The book begins with the scientific background necessary for understanding light-driven systems, discussing the nature of light and the interaction between light and NEMS/MEMS devices. It then covers innovative optical actuator technologies that have been developed for many applications. The book examines photoresponsive materials that enable the design of optically driven structures and mechanisms and describes specific light-driven technologies that permit the manipulation of micro- and nanoscale objects. It also explores applications in optofluidics, bioMEMS and biophotonics, medical device design, and micromachine control. Inspiring the next generation of scientists and engineers to advance light-driven technologies, this book gives readers a solid grounding in this emerging interdisciplinary area. It thoroughly explains the scientific language and fundamental principles, provides a holistic view of optical nano and micro actuator systems, and illustrates current and potential applications of light-driven systems.
Download or read book Reconfigurable Technology for Future Optical Access Networks written by She-Hwa Yen and published by Stanford University. This book was released on 2011 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fiber-based access is recognized as the most promising technology for solving broadband bandwidth bottlenecks. Time division multiplexing passive optical networks (TDM-PONs) that are passive and non-reconfigurable are currently the most widely deployed type of fiber access networks. However, due to their passive nature, TDM-PONs faces several limitations such as inflexible service area coverage, lack of intelligence for control, and inability to counteract security attacks. In order to address the current limitations of optical access networks, we propose reconfigurable technologies for next generation PONs. Two novel reconfigurable technologies are proposed, analyzed, and experimentally evaluated. The first solution is a reconfigurable power-and wavelength- assignment technology based on a novel non-volatile, reconfiguration node. The proposed remote node can reconfigure the network to adapt it to varying degrees of deployment conditions and/or network attacks. Moreover, the proposed remote node incorporates a novel quasi-passive device that does not consume energy once it is reconfigured into a new latching state. Therefore, the proposed remote node has very low energy consumption and does not require local power supply to preserve the passive character of the distribution network. In particular, two novel quasi-passive optical power splitter technologies based on Micro-Electro-Mechanical Systems (MEMS) and transition metal oxide have been designed for the reconfigurable device. A simulation study shows the proposed reconfigurable device would outperform traditional passive splitter in terms of maximum number of supportable users under realistic deployment conditions. The second solution addresses the issue of reconfigurable network consolidation and infrastructure simplification. Current TDM-PONs suffers from limited reach and split-ratio. To enhance the performance in terms of service range and quality of service, reconfigurable network consolidation is a promising solution. It can also simplify the network and reduce cost. We propose the following novel reconfigurable technologies for consolidation and simplification of next generation access networks: (1) Passive reach-extension technology for the drop section of optical access networks; (2) Sleep mode ONUs for energy saving; (3) Centrally managed optical signature that can monitor and protect the upstream link; and (4) Multi-rate burst mode receivers. These reconfigurable technologies can bring the intelligence into optical access networks and improve the efficiency and flexibility for next generation optical access networks.
Download or read book The Industrial Communication Technology Handbook written by Richard Zurawski and published by CRC Press. This book was released on 2005-02-23 with total page 938 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Industrial Communication Technology Handbook focuses on current and newly emerging communication technologies and systems that are evolving in response to the needs of industry and the demands of industry-led consortia and organizations. Organized into two parts, the text first summarizes the basics of data communications and IP networks, then presents a comprehensive overview of the field of industrial communications. This book extensively covers the areas of fieldbus technology, industrial Ethernet and real-time extensions, wireless and mobile technologies in industrial applications, the linking of the factory floor with the Internet and wireless fieldbuses, network security and safety, automotive applications, automation and energy system applications, and more. The Handbook presents material in the form of tutorials, surveys, and technology overviews, combining fundamentals and advanced issues with articles grouped into sections for a cohesive and comprehensive presentation. The text contains 42 contributed articles by experts from industry and industrial research establishments at the forefront of development, and some of the most renowned academic institutions worldwide. It analyzes content from an industrial perspective, illustrating actual implementations and successful technology deployments.
Download or read book Encyclopedia Of Two phase Heat Transfer And Flow Iii Macro And Micro Flow Boiling And Numerical Modeling Fundamentals A 4 volume Set written by Thome John R and published by World Scientific. This book was released on 2018-03-13 with total page 1460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Set III of this encyclopedia is a new addition to the previous Sets I and II. It contains 26 invited chapters from international specialists on the topics of numerical modeling of two-phase flows and evaporation, fundamentals of evaporation and condensation in microchannels and macrochannels, development and testing of micro two-phase cooling systems for electronics, and various special topics (surface wetting effects, microfin tubes, two-phase flow vibration across tube bundles). The chapters are written both by renowned university researchers and by well-known engineers from leading corporate research laboratories. Numerous 'must read' chapters cover the fundamentals of research and engineering practice on boiling, condensation and two-phase flows, two-phase heat transfer equipment, electronics cooling systems, case studies and so forth. Set III constitutes a 'must have' reference together with Sets I and II for thermal engineering researchers and practitioners.
Download or read book Introducing Photonics written by Brian Culshaw and published by Cambridge University Press. This book was released on 2020-07-30 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: The essential guide for anyone wanting a quick introduction to the fundamental ideas underlying photonics. The author uses his forty years of experience in photonics research and teaching to provide intuitive explanations of key concepts, and demonstrates how these relate to the operation of photonic devices and systems. Readers will gain insight into the nature of light and the ways in which it interacts with materials and structures, and learn how these basic ideas are applied in areas such as optical systems, 3D imaging and astronomy. Carefully designed worked examples and end-of-chapter problems enable students to check their understanding, with full solutions available online. Mathematical treatments are kept as simple as possible, allowing readers to grasp even the most complex of concepts. Clear, concise and accessible, this is the perfect guide for undergraduate students taking a first course in photonics, and anyone in academia or industry wanting to review the fundamentals.
Download or read book Micro optics VCSELs and Photonic Interconnects written by and published by . This book was released on 2004 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Optical MEMS written by Huikai Xie and published by MDPI. This book was released on 2019-08-06 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue Optical MEMS that was published in Micromachines
Download or read book Microoptics and Nanooptics Fabrication written by Shanalyn Kemme and published by CRC Press. This book was released on 2018-09-03 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: The deep interconnection between micro/nanooptical components and related fabrication technologies—and the constant changes in this ever-evolving field—means that successful design depends on the engineer’s ability to accommodate cutting-edge theoretical developments in fabrication techniques and experimental realization. Documenting the state of the art in fabrication processes, Microoptics and Nanooptics Fabrication provides an up-to-date synopsis of recent breakthroughs in micro- and nanooptics that improve key developmental processes. This text elucidates the precise and miniaturized scale of today’s fabrication methods and their importance in creating new optical components to access the spectrum of physical optics. It details successful fabrication techniques and their direct effect on the intended performance of micro- and nanooptical components. The contributors explore the constraints related to material selection, component lateral extent, minimum feature size, and other issues that cause fabrication techniques to lag behind corresponding theory in the development process. Written with the professional optical engineer in mind, this book omits the already well-published broader processing fundamentals. Instead it focuses on key tricks of the trade helpful in reformulating processes to achieve necessary optical targets, improve process fidelity, and reduce production costs. The contributing authors represent the vanguard in micro-optical fabrication. The result of their combined efforts, this searing analysis of emerging fabrication technologies will continue to fuel the expansion of optics components, from the microwave to the infrared through the visible regime.
Download or read book MicroNano Integration written by Harald Knobloch and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, micro- and nanotechnologies became key technologies, having a significant effect on the development of new products and production technologies, as well as on novel medical diagnosis and treatment methods. Moreover, due to their enormous potential for new applications, micro- and nanotechnologies, in future, will increasingly affect our every days life, with an impact, comparable to that of the industrial revolution in the 19th century, or the developments in microelectronics in the 20th century. Although, micro- and nanotechnologies, in general, are regarded as two independent disciplines, there is obviously an intense interaction between these two fascinating technologies. The term "MicroNano Integration", in this context, addresses the enormous potential of synergy effects, provided by the combination and mutual integration of micro- and nanotechnological elements. In order to discuss the integration aspects of micro- and nanotechnologies, the "International Forum on MicroNano Integration", a conference, held in Potsdam, Germany on December 3-4, 2003 brought together researchers from both communities - from industries as well as from scientific institutions. The contributions to this book reflect the discussions during the conference.
Download or read book Handbook of Silicon Based MEMS Materials and Technologies written by Markku Tilli and published by Elsevier. This book was released on 2020-04-17 with total page 1028 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Silicon Based MEMS Materials and Technologies, Third Edition is a comprehensive guide to MEMS materials, technologies, and manufacturing with a particular emphasis on silicon as the most important starting material used in MEMS. The book explains the fundamentals, properties (mechanical, electrostatic, optical, etc.), materials selection, preparation, modeling, manufacturing, processing, system integration, measurement, and materials characterization techniques of MEMS structures. The third edition of this book provides an important up-to-date overview of the current and emerging technologies in MEMS making it a key reference for MEMS professionals, engineers, and researchers alike, and at the same time an essential education material for undergraduate and graduate students. Provides comprehensive overview of leading-edge MEMS manufacturing technologies through the supply chain from silicon ingot growth to device fabrication and integration with sensor/actuator controlling circuits Explains the properties, manufacturing, processing, measuring and modeling methods of MEMS structures Reviews the current and future options for hermetic encapsulation and introduces how to utilize wafer level packaging and 3D integration technologies for package cost reduction and performance improvements Geared towards practical applications presenting several modern MEMS devices including inertial sensors, microphones, pressure sensors and micromirrors
