Download or read book Ferroelectric Crystals for Photonic Applications written by Pietro Ferraro and published by Springer Science & Business Media. This book was released on 2008-09-02 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the latest achievements in the field of ferroelectric domain engineering and characterization at micron- and nano-scale dimensions and periods. The book collects the results obtained in recent years by world renowned scientific leaders in the field, thus providing a valid and unique overview of the state-of-the-art. At the same time the book provides a view to future applications of those engineered materials in the field of photonics.
Download or read book Semiconductor Device Reliability written by A. Christou and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication is a compilation of papers presented at the Semiconductor Device Reliabi lity Workshop sponsored by the NATO International Scientific Exchange Program. The Workshop was held in Crete, Greece from June 4 to June 9, 1989. The objective of the Workshop was to review and to further explore advances in the field of semiconductor reliability through invited paper presentations and discussions. The technical emphasis was on quality assurance and reliability of optoelectronic and high speed semiconductor devices. The primary support for the meeting was provided by the Scientific Affairs Division of NATO. We are indebted to NATO for their support and to Dr. Craig Sinclair, who admin isters this program. The chapters of this book follow the format and order of the sessions of the meeting. Thirty-six papers were presented and discussed during the five-day Workshop. In addi tion, two panel sessions were held, with audience participation, where the particularly controversial topics of bum-in and reliability modeling and prediction methods were dis cussed. A brief review of these sessions is presented in this book.
Download or read book Advanced Materials for Integrated Optical Waveguides written by Xingcun Colin Tong Ph.D and published by Springer Science & Business Media. This book was released on 2013-10-17 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive introduction to integrated optical waveguides for information technology and data communications. Integrated coverage ranges from advanced materials, fabrication, and characterization techniques to guidelines for design and simulation. A concluding chapter offers perspectives on likely future trends and challenges. The dramatic scaling down of feature sizes has driven exponential improvements in semiconductor productivity and performance in the past several decades. However, with the potential of gigascale integration, size reduction is approaching a physical limitation due to the negative impact on resistance and inductance of metal interconnects with current copper-trace based technology. Integrated optics provides a potentially lower-cost, higher performance alternative to electronics in optical communication systems. Optical interconnects, in which light can be generated, guided, modulated, amplified, and detected, can provide greater bandwidth, lower power consumption, decreased interconnect delays, resistance to electromagnetic interference, and reduced crosstalk when integrated into standard electronic circuits. Integrated waveguide optics represents a truly multidisciplinary field of science and engineering, with continued growth requiring new developments in modeling, further advances in materials science, and innovations in integration platforms. In addition, the processing and fabrication of these new devices must be optimized in conjunction with the development of accurate and precise characterization and testing methods. Students and professionals in materials science and engineering will find Advanced Materials for Integrated Optical Waveguides to be an invaluable reference for meeting these research and development goals.
Download or read book Ceramic Abstracts written by and published by . This book was released on 1999 with total page 950 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gallium Oxide written by Masataka Higashiwaki and published by Springer Nature. This book was released on 2020-04-23 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides comprehensive coverage of the new wide-bandgap semiconductor gallium oxide (Ga2O3). Ga2O3 has been attracting much attention due to its excellent materials properties. It features an extremely large bandgap of greater than 4.5 eV and availability of large-size, high-quality native substrates produced from melt-grown bulk single crystals. Ga2O3 is thus a rising star among ultra-wide-bandgap semiconductors and represents a key emerging research field for the worldwide semiconductor community. Expert chapters cover physical properties, synthesis, and state-of-the-art applications, including materials properties, growth techniques of melt-grown bulk single crystals and epitaxial thin films, and many types of devices. The book is an essential resource for academic and industry readers who have an interest in, or plan to start, a new R&D project related to Ga2O3.
Download or read book Fundamentals of Molecular Catalysis written by and published by Elsevier. This book was released on 2003-04-02 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: Almost all contemporary organic synthesis involve transition metal complexes as catalysts or particular reagents. The aim of this book is to provide the reader with detailed accounts of elementary processes within molecular catalysis to allow its development and as an aid in designing novel catalytic systems. The book comprises authoritative reviews on elementary processes from experts working at the forefront of organometallic chemistry. · This is the first book that focuses on elementary processes in transition metal complexes for understanding catalytic mechanisms· Provides detailed description of elementary processes involved in catalytic cycles by experts in the field· Provides an overview of the mechanisms of various homogeneous catalyses
Download or read book Photonic Crystal Fibers written by F. Poli and published by Springer Science & Business Media. This book was released on 2007-08-17 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended to provide expert guidance through the properties of photonic crystal fibers, with a specific focus on the telecommunication aspects. This is the first book to report a complete overview of photonic crystal fiber analysis and design for telecom applications. The authors believe that photonic crystal fibers can revolutionize the field of guided optics and its applications.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1981 with total page 910 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Defects in Semiconductors written by and published by Academic Press. This book was released on 2015-06-08 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume, number 91 in the Semiconductor and Semimetals series, focuses on defects in semiconductors. Defects in semiconductors help to explain several phenomena, from diffusion to getter, and to draw theories on materials' behavior in response to electrical or mechanical fields. The volume includes chapters focusing specifically on electron and proton irradiation of silicon, point defects in zinc oxide and gallium nitride, ion implantation defects and shallow junctions in silicon and germanium, and much more. It will help support students and scientists in their experimental and theoretical paths. - Expert contributors - Reviews of the most important recent literature - Clear illustrations - A broad view, including examination of defects in different semiconductors
Download or read book III Nitride Electronic Devices written by and published by Academic Press. This book was released on 2019-10-18 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: III-Nitride Electronic Devices, Volume 102, emphasizes two major technical areas advanced by this technology: radio frequency (RF) and power electronics applications. The range of topics covered by this book provides a basic understanding of materials, devices, circuits and applications while showing the future directions of this technology. Specific chapters cover Electronic properties of III-nitride materials and basics of III-nitride HEMT, Epitaxial growth of III-nitride electronic devices, III-nitride microwave power transistors, III-nitride millimeter wave transistors, III-nitride lateral transistor power switch, III-nitride vertical devices, Physics-Based Modeling, Thermal management in III-nitride HEMT, RF/Microwave applications of III-nitride transistor/wireless power transfer, and more.
Download or read book Parameter Extraction and Complex Nonlinear Transistor Models written by Gunter Kompa and published by Artech House. This book was released on 2019-12-31 with total page 609 pages. Available in PDF, EPUB and Kindle. Book excerpt: All model parameters are fundamentally coupled together, so that directly measured individual parameters, although widely used and accepted, may initially only serve as good estimates. This comprehensive resource presents all aspects concerning the modeling of semiconductor field-effect device parameters based on gallium-arsenide (GaAs) and gallium nitride (GaN) technology. Metal-semiconductor field-effect transistors (MESFETs), high electron mobility transistors (HEMTs) and heterojunction bipolar transistors (HBTs), their structures and functions, and existing transistor models are also classified. The Shockley model is presented in order to give insight into semiconductor field-effect transistor (FET) device physics and explain the relationship between geometric and material parameters and device performance. Extraction of trapping and thermal time constants is discussed. A special section is devoted to standard nonlinear FET models applied to large-signal measurements, including static-/pulsed-DC and single-/two-tone stimulation. High power measurement setups for signal waveform measurement, wideband source-/load-pull measurement (including envelope source-/load pull) are also included, along with high-power intermodulation distortion (IMD) measurement setup (including envelope load-pull). Written by a world-renowned expert in the field, this book is the first to cover of all aspects of semiconductor FET device modeling in a single volume.
Download or read book Nano Biophotonics written by Hiroshi Masuhara and published by Elsevier. This book was released on 2007-02-16 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: This third volume in the series represents the Proceedings of the 3rd International Nanophotonics Symposium, July 6-8, 2006, Icho-Kaikan, Osaka University, Osaka, Japan. Over a two-day symposium, distinguished scientists from around the world convened to discuss the latest progress in this field and the conclusions have been summarised in Nano Biophotonics: Science and Technology. The contents of this book have been compiled by invited lecturers, research members of the relevant projects/program, and some of general participants. The book has 27 chapters which are classified into 4 parts; nano bio-spectroscopy, nano bio-dynamics, nano bio-processing, and nano bio-devices.* Bridges the gap between conventional photophysics & photochemistry and nanoscience* Continuing the series that focuses on 'hot' areas of photochemistry, optics, material science and bioscience
Download or read book Fabrication of Porous Gallium Nitride by Photoelectrochemical Etching Method Penerbit USM written by Cheah Sook Fong and published by Penerbit USM. This book was released on 2017 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photoelectrochemical (PEC) etching is a simple and inexpensive wet etching approach that is widely used to fabricate porous gallium nitride (GaN) thin films. However, many fundamental issues on the etching mechanism and the optical response of the fabricated porous structure still remain unclear. In this book, PEC etched porous GaN thin films with a variety of morphologies such as circular, hexagonal, leaf like-, and honeycomb-like patterns were described in detail. The effects of semiconductor types, etching voltage and etching duration on the surface morphology and the optical response of the fabricated porous structure were discussed. Attenuated total reflection method which is very sensitive to the surface layer of the porous GaN was applied to extract the carrier concentration, porosity, and layer thicknesses or the porous layer. Through this book, a better understanding of the PEC etching of the porous GaN can be obtained.
Download or read book Physics and Applications of Defects in Advanced Semiconductors Volume 325 written by M. O. Manasreh and published by . This book was released on 1994-04-18 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: The MRS Symposium Proceeding series is an internationally recognised reference suitable for researchers and practitioners.
Download or read book Nanoelectronics and Information Technology written by Rainer Waser and published by Wiley-VCH. This book was released on 2003-04-09 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing an introduction to electronic materials and device concepts for the major areas of current and future information technology, the value of this book lies in its focus on the underlying principles. Illustrated by contemporary examples, these basic principles will hold, despite the rapid developments in this field, especially emphasizing nanoelectronics. There is hardly any field where the links between basic science and application are tighter than in nanoelectronics & information technology. As an example, the design of resonant tunneling transistors, single electron devices or molecular electronic structures is simply inconceivable without delving deep into quantum mechanics. This textbook is primarily aimed at students of physics, electrical engineering and information technology, as well as material science in their 3rd year and higher. It is equally of interest to professionals wanting a broader overview of this hot topic. "Nanoelectronics and Information Technology" by Rainer Waser and his colleagues is an outstanding compendium of information about an exciting new field. Owing to its high quality and complete coverage of the many topics in this area, this well referenced book will have a long and very useful life as a primary text for students experienced and new in nanoelectronics. It is a very impressive book." (Richard Siegel)
Download or read book Reliability and Degradation written by M. J. Howes and published by . This book was released on 1986 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microwave Tubes written by and published by . This book was released on 1961 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt:
